RESUMEN
The main obstacle for the electrocatalytic production of "green hydrogen" is finding suitable electrocatalysts which operate highly efficiently over extended periods of time. The topic of this study is the oxygen evolution reaction (OER), one of the half-reactions of water splitting. It is complex and has intricate kinetics, which impairs the reaction efficiency. Transition metal oxides have shown potential as electrocatalysts for this reaction, but much remains unknown about the atomic scale processes. We have investigated structure-composition-reactivity correlations for Co3O4, CoFe2O4, and Fe3O4 epitaxial thin-film electrocatalysts exposing either the (001) or (111) surface facets. We found that for Co3O4, the (001) facet is more reactive, while for the other oxides, the (111) facet is more active. A Tafel-like evaluation reveals systematically smaller "Tafel" slopes for the (001) facets. Furthermore, the slopes are smaller for the iron-containing films. Additionally, we found that the oxyhydroxide skin layer which forms under OER reaction conditions is thicker on the cobalt oxides than on the other oxides, which we attribute to either a different density of surface defects or to iron hindering the growth of the skin layers. All studied skin layers were thinner than 1 nm.
RESUMEN
Single-atom (SA) catalysis presently receives much attention with its promise to decrease the cost of the active material while increasing the catalyst's performance. However, key details such as the exact location of SA species and their stability are often unclear due to a lack of atomic level information. Here, we show how vibrational spectra measured with surface action spectroscopy (SAS) and density functional theory (DFT) simulations can differentiate between different adatom binding sites and determine the location of Ni and Au single atoms on Fe3 O4 (001). We reveal that Ni and Au adatoms selectively bind to surface oxygen ions which are octahedrally coordinated to Fe ions. In addition, we find that the Ni adatoms can activate O2 to superoxide in contrast to the bare surface and Ni in subsurface positions. Overall, we unveil the advantages of combining SAS and DFT for improving the understanding of single-atom catalysts.
RESUMEN
The activation of molecular oxygen is a fundamental step in almost all catalytic oxidation reactions. We have studied this topic and the role of surface vacancies for Co3 O4 (100) films with a synergistic combination of experimental and theoretical methods. We show that the as-prepared surface is B-layer terminated and that mild reduction produces oxygen single and double vacancies in this layer. Oxygen adsorption experiments clearly reveal different superoxide species below room temperature. The superoxide desorbs below ca. 120â K from a vacancy-free surface and is not active for CO oxidation while superoxide on a surface with oxygen vacancies is stable up to ca. 270â K and can oxidize CO already at the low temperature of 120â K. The vacancies are not refilled by oxygen from the superoxide, which makes them suitable for long-term operation. Our joint experimental/theoretical effort highlights the relevance of surface vacancies in catalytic oxidation reactions.
RESUMEN
Surface Action Spectroscopy, a vibrational spectroscopy method developed in recent years at the Fritz Haber Institute is employed for structure determination of clean and H2O-dosed (111) magnetite surfaces. Surface structural information is revealed by using the microscopic surface vibrations as a fingerprint of the surface structure. Such vibrations involve just the topmost atomic layers, and therefore the structural information is truly surface related. Our results strongly support the view that regular Fe3O4(111)/Pt(111) is terminated by the so-called Fetet1 termination, that the biphase termination of Fe3O4(111)/Pt(111) consists of FeO and Fe3O4(111) terminated areas, and we show that the method can differentiate between different water structures in H2O-derived adsorbate layers on Fe3O4(111)/Pt(111). With this, we conclude that the method is a capable new member in the set of techniques providing crucial information to elucidate surface structures. The method does not rely on translational symmetry and can therefore also be applied to systems which are not well ordered. Even an application to rough surfaces is possible.
RESUMEN
In this paper a growth recipe for well-ordered iron sulfide films and the results of their characterisation are presented. The film was studied using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), and scanning tunneling microscopy (STM). XRD data reveal that the film has a NiAs-like structure with Fe vacancies, similar to iron sulfides such as pyrrhotite and smythite, although no indication of any ordering of these vacancies was observed. LEED and STM results show that the film exhibits a 2 × 2 surface reconstruction. XPS data provide additional evidence for a large number of Fe vacancies, and the oxidation states of the Fe and S in the film are analysed.
RESUMEN
The relationship between the electronic structure of CaO and the binding energy, BE, shifts between surface and bulk atoms is examined and the physical origins of these shifts are established. Furthermore, the contribution of covalent mixing to the interaction, including the energetic importance, is investigated and found to be small. In particular, the small shift between surface and bulk O(1s) BEs is shown to originate from changes in the polarizable charge distribution of surface O anions. This relationship, which is relevant for the catalytic properties of CaO, follows because the BE shifts are dominated by initial state contributions and the relaxation in response to the core-ionization is similar for bulk and surface. In order to explain the dominance of initial state effects for the BE shifts, the relaxation is decomposed into atomic and extra-atomic contributions. The bonding and the core-level BE shifts have been studied using cluster models of CaO with Hartree-Fock wavefunctions. The theoretical shifts are compared with X-ray photoelectron spectroscopy measurements where both angular resolution and incident photon energy have been used to distinguish surface and bulk ionization.
RESUMEN
The interaction of hydrogen with reduced ceria (CeO2-x ) powders and CeO2-x (111) thin films was studied using several characterization techniques including TEM, XRD, LEED, XPS, RPES, EELS, ESR, and TDS. The results clearly indicate that both in reduced ceria powders as well as in reduced single crystal ceria films hydrogen may form hydroxyls at the surface and hydride species below the surface. The formation of hydrides is clearly linked to the presence of oxygen vacancies and is accompanied by the transfer of an electron from a Ce3+ species to hydrogen, which results in the formation of Ce4+ , and thus in oxidation of ceria.
RESUMEN
Vibrational action spectroscopy employing infrared radiation from a free-electron laser has been successfully used for many years to study the vibrational and structural properties of gas phase aggregates. Despite the high sensitivity of this method no relevant studies have yet been conducted for solid sample surfaces. We have set up an experiment for the application of this method to such targets, using infrared light from the free-electron laser of the Fritz Haber Institute. In this Letter, we present first results of this technique with adsorbed argon and neon atoms as messengers. We were able to detect surface-located vibrations of a thin V_{2}O_{3}(0001) film on Au(111) as well as adsorbate vibrations, demonstrating that this method is highly surface sensitive. We consider that the dominant channel for desorption of the messenger atoms is direct inharmonic vibrational coupling, which is essentially insensitive to subsurface or bulk vibrations. Another channel is thermal desorption due to sample heating by absorption of infrared light. The high surface sensitivity of the nonthermal channel and its insensitivity to subsurface modes makes this technique an ideal tool for the study of surface-located vibrations.
RESUMEN
The (0001) surface of vanadium sesquioxide, V2O3, is terminated by vanadyl groups under standard ultra high vacuum preparation conditions. Reduction with electrons results in a chemically highly active surface with a well-defined LEED pattern indicating a high degree of order. In this work we report the first quantitative structure determination of a reduced V2O3(0001) surface. We identify two distinct surface phases by STM, one well ordered and one less well ordered. I/V-LEED shows the ordered phase to be terminated by a single vanadium atom per surface unit cell on a quasi-hexagonal oxygen layer with three atoms per two-dimensional unit cell. Furthermore we compare the method of surface reduction via electron bombardment with the deposition of V onto a vanadyl terminated film. The latter procedure was previously proposed to result in a structure with three surface vanadium atoms in the 2D unit cell and we confirm this with simulated STM images.
RESUMEN
In a recent paper [A. J. Window et al., Phys. Rev. Lett. 107, 016105 (2011)], it was proposed that V_{2}O_{3}(0001) is terminated by the so-called O_{3} termination, a reconstruction with a terminating distorted hexagonal oxygen layer. We show that the surface is terminated by vanadyl (VâO) groups instead. This conclusion is based on quantitative low-energy electron diffraction combined with scanning tunneling microscopy, fast atom scattering, and density functional theory employing the Heyd-Scuseria-Ernzerhof functional. New insights into the subsurface sensitivity of ion beam triangulation show that results previously interpreted in favor of the O_{3} termination are reconcilable with vanadyl termination as well.
RESUMEN
Theoretical and experimental results for the surface core-level binding energy, BE, shifts, SCLS, for MgO(100) are presented and the anomalous O(1s) SCLS is interpreted in terms of the surface electronic structure. While the Mg(2p) surface BE shifts to a higher value than bulk by ≈1 eV as expected from the different surface and bulk Madelung potentials, the O(1s) SCLS is almost 0 rather than ≈-1 eV, expected from the Madelung potentials. The distortion of the surface atoms from the spherical symmetry of the bulk Mg and O atoms is examined by a novel theoretical procedure. The anomalous O SCLS is shown to arise from the increase of the effective size of surface O anions.
RESUMEN
Water electrolysis to produce 'green H2' with renewable energy is a promising option for the upcoming green economy. However, the slow and complex oxygen evolution reaction at the anode limits the efficiency. Co3O4 with added iron is a capable catalyst for this reaction, but the role of iron is presently unclear. To investigate this topic, we compare epitaxial Co3O4(111), CoFe2O4(111), and Fe3O4(111) thin film model electrocatalysts, combining quasi in-situ preparation and characterization in ultra-high vacuum with electrochemistry experiments. The well-defined composition and structure of the thin epitaxial films permits the obtention of quantitatively comparable results. CoFe2O4(111) is found to be up to about four times more active than Co3O4(111) and about nine times more than Fe3O4(111), with the activity depending acutely on the Co/Fe concentration ratio. Under reaction conditions, all three oxides are covered by oxyhydroxide. For CoFe2O4(111), the oxyhydroxide's Fe/Co concentration ratio is stabilized by partial iron dissolution.
RESUMEN
Hydroxy-mediated methoxy formation or stabilization is probably an important process in many methanol adsorption systems. Hydrogen atoms originating from the scission of the methanol O-H bond react with the substrate and form water. This process may result 1) in the production of additional surface defects as reactive centers for methoxy formation and 2) in the stabilization of methoxy groups by suppression of methanol formation.
RESUMEN
Action spectroscopy with inert gas messengers is commonly used for the characterization of aggregates in the gas phase. The messengers, often rare gas atoms or D2 molecules, are attached to the gas phase aggregates at low temperature. Vibrational spectra of the aggregates are measured via detection of inert gas desorption following a vibrational excitation by variable-energy infrared light. We have constructed an apparatus for the application of action spectroscopy to surfaces of solids with the aim of establishing a new method for the vibrational spectroscopy of surfaces and deposited clusters. Experiments performed for neon covered V2O3(0001) show that this method can provide information about surface vibrations. Besides the surface sensitive channel, there is also a bulk sensitive one as demonstrated with the example of CeO2(111) thin film data. Unlike infrared reflection absorption spectroscopy, normalization to a reference spectrum is not required for action spectroscopy data, and unlike high resolution electron energy loss spectroscopy, the action spectroscopy method does not suffer from moderate resolution nor from multiple excitations. Selective decoration of specific surface features with messenger atoms may be utilized to focus the spectroscopic information onto these features.