Thiolene- and Polycaprolactone Methacrylate-Based Polymerized High Internal Phase Emulsion (PolyHIPE) Scaffolds for Tissue Engineering.

Highly porous emulsion templated polymers (PolyHIPEs) provide a number of potential advantages in the fabrication of scaffolds for tissue engineering and regenerative medicine. Porosity enables cell ingrowth and nutrient diffusion within, as well as waste removal from, the scaffold. The properties offered by emulsion templating alone include the provision of high interconnected porosity, and, in combination with additive manufacturing, the opportunity to introduce controlled multiscale porosity to complex or custom structures. However, the majority of monomer systems reported for PolyHIPE preparation are unsuitable for clinical applications as they are nondegradable. Thiol-ene chemistry is a promising route to produce biodegradable photocurable PolyHIPEs for the fabrication of scaffolds using conventional or additive manufacturing methods; however, relatively little research has been reported on this approach. This study reports the groundwork to fabricate thiol- and polycaprolactone (PCL)-based PolyHIPE materials via a photoinitiated thiolene click reaction. Two different formulations, either three-arm PCL methacrylate (3PCLMA) or four-arm PCL methacrylate (4PCLMA) moieties, were used in the PolyHIPE formulation. Biocompatibility of the PolyHIPEs was investigated using human dermal fibroblasts (HDFs) and human osteosarcoma cell line (MG-63) by DNA quantification assay, and developed PolyHIPEs were shown to be capable of supporting cell attachment and viability.

Multiparametric MRI as a Noninvasive Monitoring Tool for Children With Autoimmune Hepatitis.

OBJECTIVES: Autoimmune hepatitis (AIH) is a progressive liver disease managed with corticosteroids and immunosuppression and monitored using a combination of liver biochemistry and histology. However, liver biopsy is invasive with risk of pain and bleeding. The aim of the present study was to investigate the utility of noninvasive imaging with multiparametric magnetic resonance imaging (MRI) (mpMRI) to provide clinically useful information on the presence and extent of hepatic inflammation, potentially guiding immunosuppression. METHODS: Eighty-one participants (aged 6-18), 21 healthy and 60 AIH patients, underwent multiparametric MRI to measure fibro-inflammation with iron-corrected T1 (cT1) at the Children's Memorial Health Institute in Warsaw alongside other clinical blood tests and liver biopsy at recruitment and after an average of 16-month follow-up (range 9-22 months). Correlation analyses were used to investigate the associations between cT1 with blood serum markers and histological scores. RESULTS: At recruitment, patients with AIH had a higher cT1 value than healthy controls (P < 0.01). cT1 correlated significantly with key histopathological features of disease. Treatment naïve AIH patients showed evidence of inflammation and heterogeneity across the liver compared to healthy controls.At follow-up, cT1 showed utility in monitoring disease regression as most patients showed significantly reduced fibro-inflammation with treatment (P < 0.0001) over the observational period. Six patients had histological fibrosis and clear fibro-inflammation on MR despite biochemical remission (normalized aspartate aminotransferase (AST), alanine aminotransferase (ALT), and immunoglobulin G [IgG]). CONCLUSIONS: Multiparametric MRI can measure disease burden in pediatric AIH and can show changes over time in response to therapy. Active disease can be seen even in biochemical remission in children.

Quantitative MRCP Imaging: Accuracy, Repeatability, Reproducibility, and Cohort-Derived Normative Ranges.

BACKGROUND: Magnetic resonance cholangiopancreatography (MRCP) is an important tool for noninvasive imaging of biliary disease, however, its assessment is currently subjective, resulting in the need for objective biomarkers. PURPOSE: To investigate the accuracy, scan/rescan repeatability, and cross-scanner reproducibility of a novel quantitative MRCP tool on phantoms and in vivo. Additionally, to report normative ranges derived from the healthy cohort for duct measurements and tree-level summary metrics. STUDY TYPE: Prospective. PHANTOMS/SUBJECTS: Phantoms: two bespoke designs, one with varying tube-width, curvature, and orientation, and one exhibiting a complex structure based on a real biliary tree. Subjects Twenty healthy volunteers, 10 patients with biliary disease, and 10 with nonbiliary liver disease. SEQUENCE/FIELD STRENGTH: MRCP data were acquired using heavily T2 -weighted 3D multishot fast/turbo spin echo acquisitions at 1.5T and 3T. ASSESSMENT: Digital instances of the phantoms were synthesized with varying resolution and signal-to-noise ratio. Physical 3D-printed phantoms were scanned across six scanners (two field strengths for each of three manufacturers). Human subjects were imaged on four scanners (two fieldstrengths for each of two manufacturers). STATISTICAL TESTS: Bland-Altman analysis and repeatability coefficient (RC). RESULTS: Accuracy of the diameter measurement approximated the scanning resolution, with 95% limits of agreement (LoA) from -1.1 to 1.0 mm. Excellent phantom repeatability was observed, with LoA from -0.4 to 0.4 mm. Good reproducibility was observed across the six scanners for both phantoms, with a range of LoA from -1.1 to 0.5 mm. Inter- and intraobserver agreement was high. Quantitative MRCP detected strictures and dilatations in the phantom with 76.6% and 85.9% sensitivity and 100% specificity in both. Patients and healthy volunteers exhibited significant differences in metrics including common bile duct (CBD) maximum diameter (7.6 mm vs. 5.2 mm P = 0.002), and overall biliary tree volume 12.36 mL vs. 4.61 mL, P = 0.0026). DATA CONCLUSION: The results indicate that quantitative MRCP provides accurate, repeatable, and reproducible measurements capable of objectively assessing cholangiopathic change. Evidence Level: 1 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2020;52:807-820.

Preparation of hybrid thiol-acrylate emulsion-templated porous polymers by interfacial copolymerization of high internal phase emulsions.

Emulsion-templated highly porous polymers (polyHIPEs), containing distinct regions differing in composition, morphology, and/or properties, are prepared by the simultaneous polymerization of two high internal phase emulsions (HIPEs) contained within the same mould. The HIPEs are placed together in the mould and subjected to thiol-acrylate photopolymerization. The resulting polyHIPE material is found to contain two distinct semicircular regions, reflecting the composition of each HIPE. The original interface between the two emulsions becomes a copolymerized band between 100 and 300 µm wide, which is found to be mechanically robust. The separate polyHIPE layers are distinguished from one another by their differing average void diameter, chemical composition, and extent of contraction upon drying.

Quantitative digital pathology enables automated and quantitative assessment of inflammatory activity in patients with autoimmune hepatitis.

Background: Chronic liver disease diagnoses depend on liver biopsy histopathological assessment. However, due to the limitations associated with biopsy, there is growing interest in the use of quantitative digital pathology to support pathologists. We evaluated the performance of computational algorithms in the assessment of hepatic inflammation in an autoimmune hepatitis in which inflammation is a major component. Methods: Whole-slide digital image analysis was used to quantitatively characterize the area of tissue covered by inflammation [Inflammation Density (ID)] and number of inflammatory foci per unit area [Focal Density (FD)] on tissue obtained from 50 patients with autoimmune hepatitis undergoing routine liver biopsy. Correlations between digital pathology outputs and traditional categorical histology scores, biochemical, and imaging markers were assessed. The ability of ID and FD to stratify between low-moderate (both portal and lobular inflammation ≤1) and moderate-severe disease activity was estimated using the area under the receiver operating characteristic curve (AUC). Results: ID and FD scores increased significantly and linearly with both portal and lobular inflammation grading. Both ID and FD correlated moderately-to-strongly and significantly with histology (portal and lobular inflammation; 0.36≤R≤0.69) and biochemical markers (ALT, AST, GGT, IgG, and gamma globulins; 0.43≤R≤0.57). ID (AUC: 0.85) and FD (AUC: 0.79) had good performance for stratifying between low-moderate and moderate-severe inflammation. Conclusion: Quantitative assessment of liver biopsy using quantitative digital pathology metrics correlates well with traditional pathology scores and key biochemical markers. Whole-slide quantification of disease can support stratification and identification of patients with more advanced inflammatory disease activity.

A 3D Quantitative MRC Modeling Images Detected Case of Intrahepatic Biliary Stricture Diseases.

In the future, the application of quantitative imaging and computational analysis will reduce the burden on radiologists. We herein report 8 pilot cases both with and without intrahepatic biliary stricture (IHBS) diseases which have been analyzed with the novel analytical system MRCP+ (Perspectum Ltd., Oxford, UK). The colored and well-visualized 3D models of the entire biliary trees could be obtained in all 8 cases. Three representative cases did not show dilated regions in the intrahepatic bile ducts. Cases diagnosed as a pancreatico-biliary maljunction showed slightly increased dilated visualization in the extrahepatic duct. Except in a case with severe stenosis resulting from hepatolithiasis, the number of visualized intrahepatic bile ducts tended to be decreased and the volume of biliary tree and the total length of stricture and dilatation were also decreased. However, the number of IHBS or dilatation was unchanged. The number of strictures obtained by MRCP+ and the subjective counts of stenosis from a radiologist was not found to be correlated. In a case of severe stenosis at the left lateral bile duct, the number of intrahepatic biliary dilatations was increased. The latest computerized 3D modeling technology was found to be useful in visualizing the alteration of intraluminal diameter of the entire biliary trees at a glance, which can provide the automatic diagnosis of IHBS diseases at an earlier phase.

Quantitative multiparametric MRI as a non-invasive stratification tool in children and adolescents with autoimmune liver disease.

Autoimmune hepatitis (AIH) and autoimmune sclerosing cholangitis (ASC) are two very closely related autoimmune liver diseases with overlapping clinical features and similar management strategies. The purpose of this study was to assess the utility of quantitative imaging markers to distinguish ASC from AIH in paediatrics. 66 participants (N = 52 AIH, N = 14 ASC) aged 14.4 ± 3.3 years scheduled to undergo routine biopsy and baseline serum liver biochemistry testing were invited to undergo MRI (non-contrast abdominal MRI and 3D fast spin-echo MRCP). Multiparametric MRI was used to measure fibro-inflammation with corrected T1 (cT1), while the biliary tree was modelled   using quantitative MRCP (MRCP +). Mann-Whitney U tests were performed to compare liver function tests with imaging markers between patient groups (ASC vs AIH). Receiver operating characteristic curves and stepwise logistic regressions were used to identify the best combination of markers to discriminate between ASC and AIH. Correlations between liver function tests and imaging markers were performed using Spearman's rank correlation. cT1 was significantly correlated with liver function tests (range 0.33 ≤ R ≤ 56, p < 0.05), as well as with fibrosis, lobular and portal inflammation (range 0.31 ≤ R ≤ 42, p < 0.05). 19 MRCP + metrics correlated significantly with liver function tests (range 0.29 ≤ R ≤ 0.43, p < 0.05). GGT and MRCP + metrics were significantly higher in ASC compared to those with AIH. The best multivariable model for distinguishing ASC from AIH included total number of ducts and the sum of relative severity of both strictures and dilatations AUC: 0.91 (95% CI 0.78-1). Quantitative MRCP metrics are a good discriminator of ASC from AIH.

Bioceramic nanocomposite thiol-acrylate polyHIPE scaffolds for enhanced osteoblastic cell culture in 3D.

Emulsion-templated (polyHIPE) scaffolds for bone tissue engineering were produced by photopolymerisation of a mixture of trimethylolpropane tris(3-mercaptopropionate) and dipentaerythritol penta-/hexa-acrylate in the presence of hydroxyapatite (HA) or strontium-modified hydroxyapatite (SrHA) nanoparticles. Porous and permeable polyHIPE materials were produced regardless of the type or incorporation level of the bioceramic, although higher loadings resulted in a larger average pore diameter. Inclusion of HA and SrHA into the scaffolds was confirmed by EDX-SEM, FTIR and XPS and quantified by thermogravimetry. Addition of HA to polyHIPE scaffolds significantly enhanced compressive strength (148-216 kPa) without affecting compressive modulus (2.34-2.58 MPa). The resulting materials were evaluated in vitro as scaffolds for the 3D culture of MG63 osteoblastic cells vs. a commercial 3D cell culture scaffold (Alvetex®). Cells were able to migrate throughout all scaffolds, achieving a high density by the end of the culture period (21 days). The presence of HA and in particular SrHA gave greatly enhanced cell proliferation, as determined by staining of histological sections and total protein assay (Bradford). Furthermore, Von Kossa and Alizarin Red staining demonstrated significant mineralisation from inclusion of bioceramics, even at the earliest time point (day 7). Production of alkaline phosphatase (ALP), an early osteogenic marker, was used to investigate the influence of HA and SrHA on cell function. ALP levels were significantly reduced on HA- and SrHA-modified scaffolds by day 7, which agrees with the observed early onset of mineralisation in the presence of the bioceramics. The presented data support our conclusions that HA and SrHA enhance osteoblastic cell proliferation on polyHIPE scaffolds and promote early mineralisation.