Direct Writing of Room Temperature Polariton Condensate Lattice.

Realizing lattices of exciton polariton condensates has been of much interest owing to the potential of such systems to realize analogue Hamiltonian simulators and physical computing architectures. Here, we report the realization of a room temperature polariton condensate lattice using a direct-write approach. Polariton condensation is achieved in a microcavity embedded with host-guest Frenkel excitons of an organic dye (rhodamine) in a small-molecule ionic isolation lattice (SMILES). The microcavity is patterned using focused ion beam etching to realize arbitrary lattice geometries, including defect sites on demand. The band structure of the lattice and the emergence of condensation are imaged using momentum-resolved spectroscopy. The introduction of defect sites is shown to lower the condensation threshold and result in the formation of a defect band in the condensation spectrum. The present approach allows us to study periodic, quasiperiodic, and disordered polariton condensate lattices at room temperature using a direct-write approach.

Effective Gating in Single-Molecule Junctions through Fano Resonances.

The successful incorporation of molecules as active circuit elements relies on the ability to tune their electronic properties through chemical design. A synthetic strategy that has been used to manipulate and gate circuit conductance involves attaching a pendant substituent along the molecular conduction pathway. However, such a chemical gate has not yet been shown to significantly modify conductance. Here, we report a novel series of triarylmethylium and triangulenium carbocations gated by different substituents coupled to the delocalized conducting orbitals on the molecular backbone through a Fano resonance. By changing the pendant substituents to modulate the position of the Fano resonance and its coupling to the conducting orbitals, we can regulate the junction conductance by a remarkable factor of 450. This work thus provides a new design principle to enable effective chemical gating of single-molecule devices toward effective molecular transistors.

Robust Red-Absorbing Donor-Acceptor Stenhouse Adduct Photoswitches.

Donor-Acceptor Stenhouse Adduct (DASA), a class of push-pull negative photochrome, has received large interest lately owing to its versatile synthesis, modularity and excellent photoswitching in solutions. From a technological perspective, it is imperative for this class of photoswitches to work robustly in solid state, e. g. thin films. We feature a molecular framework for the optimized design of DASAs by introducing a new thioindoline donor (D3) and assessing its performance against known 2nd generation indoline-based donors. The systematic structure-function investigations suggest that to achieve robust reversible photoswitching, a ground state with low charge separation is desired. DASAs with stronger electron donors and a larger charge separation in the ground state result in a low population of the photothermalstationary state (PTSS) and reduced photostability. The DASA with thioindoline donor (D3A3) seems to be a special case among the donor series as it causes a red shift (ca. 15 nm), however with less polarization of the ground state and marginally better photostability as compared to the unsubstituted 2-methyl indoline (D1A3). We also emphasize the consideration of the key additional factors that can modulate the red-light photoswitching properties of DASA chromophores in polymer thin films, which might not be dominant in homogenous solution state.

Synthesis and Properties of Fluorenone-Containing Cycloparaphenylenes and Their Late-Stage Transformation.

Cycloparaphenylenes (CPPs) are the smallest possible armchair carbon nanotubes, the properties of which strongly depend on their ring size. They can be further tuned by either peripheral functionalization or by replacing phenylene rings for other aromatic units. Here we show how four novel donor-acceptor chromophores were obtained by incorporating fluorenone or 2-(9H-fluoren-9-ylidene)malononitrile into the loops of two differently sized CPPs. Synthetically, we managed to perform late-stage functionalization of the fluorenone-based rings by high-yielding Knoevenagel condensations. The structures were confirmed by X-ray crystallographic analyses, which revealed that replacing a phenylene for a fused-ring-system acceptor introduces additional strain. The donor-acceptor characters of the CPPs were supported by absorption and fluorescence spectroscopic studies, electrochemical studies (displaying the CPPs as multi-redox systems undergoing reversible or quasi-reversible redox events), as well as by computations. The oligophenylene parts were found to comprise the electron donor units of the macrocycles and the fluorenone parts the acceptor units.

Supramolecular Control of Helicene Circularly Polarized Luminescence Emitters in Molecular Solids and Bright Nanoparticles.

Circularly polarized luminescence (CPL) from chiral molecules is attracting much attention due to its potential use in optical materials. However, formulation of CPL emitters as molecular solids typically deteriorates photophysical properties in the aggregated state leading to quenching and unpredictable changes in CPL behavior impeding materials development. To circumvent these shortcomings, a supramolecular approach can be used to isolate cationic dyes in a lattice of cyanostar-anion complexes that suppress aggregation-caused quenching and which we hypothesize can preserve the synthetically-crafted chiroptical properties. Herein, we verify that supramolecular assembly of small-molecule ionic isolation lattices (SMILES) allows translation of molecular ECD and CPL properties to solids. A series of cationic helicenes that display increasing chiroptical response is investigated. Crystal structures of three different packing motifs all show spatial isolation of dyes by the anion complexes. We observe the photophysical and chiroptical properties of all helicenes are seamlessly translated to water soluble nanoparticles by the SMILES method. Also, a DMQA helicene is used as FRET acceptor in SMILES nanoparticles of intensely absorbing rhodamine antennae to generate an 18-fold boost in CPL brightness. These features offer promise for reliably accessing bright materials with programmable CPL properties.

Boosting the Brightness of Raman Tags Using Cyanostar Macrocycles.

Raman probes have received growing attention for their potential use in super-multiplex biological imaging and flow cytometry applications that cannot be achieved using fluorescent probes. However, obtaining strong Raman scattering signals from small Raman probes has posed a challenge that holds back their practical implementation. Here, we present new types of Raman-active nanoparticles (Rdots) that incorporate ionophore macrocycles, known as cyanostars, to act as ion-driven and structure-directing spacers to address this problem. These macrocycle-enhanced Rdots (MERdots) exhibit sharper and higher electronic absorption peaks than Rdots. When combined with resonant broadband time-domain Raman spectroscopy, these MERdots show a ∼3-fold increase in Raman intensity compared to conventional Rdots under the same particle concentration. Additionally, the detection limit on the concentration of MERdots is improved by a factor of 2.5 compared to that of Rdots and a factor of 430 compared to that of Raman dye molecules in solution. The compact size of MERdots (26 nm in diameter) and their increased Raman signal intensity, along with the broadband capabilities of time-domain resonant Raman spectroscopy, make them promising candidates for a wide range of biological applications.

Investigating Design Rules for Photoinduced Electron Transfer Quenching in Triangulenium Probes.

Fluorescent probes based on photoinduced electron transfer (PET) quenching of long lifetime triangulenium fluorophores have found multiple applications. For such probes a successful design relies on the right balance between the rate of PET quenching and fluorescence. In a series of ADOTA (A) and DAOTA (D) triangulenium fluorophores appended with aniline-like quencher moieties, we have investigated the rate of quenching and its relation to thermodynamic driving force, distance, and conjugation within the quencher moiety. Three different quenchers, a short (1), a long (2), and a long twisted (3), 4-aminophenyl, 4'-aminobiphenyl, and 2,2'-dimethyl-4'-aminobiphenyl, respectively were investigated. Steady-state spectroscopy and electrochemistry confirms that the quencher moieties are electronically decoupled from the dyes and have similar oxidation potentials and thus driving force for PET quenching, irrespectively of their different length and conjugation. Time-resolved fluorescence measurement was used to measure the fast PET quenching, with rate constant kPET ranging from >4×1011 to 2×109  s-1 . Interestingly, PET quenching is equally efficient/fast from 1 and 2, even with increase in distance between the donor and the acceptor. However, when twisting the biphenyl in 3, a 20-fold decrease in quenching is found. Even with this decrease in kPET, the quenching in 3 A/D is still highly efficient, with nearly 99 % quenching. The study show that long lifetime fluorophores can be efficiently switched even by relatively slow PET processes and that PET quencher moieties can be removed far from the fluorophore if conjugated linkers are applied.

Triplet States of Cyanostar and Its Anion Complexes.

The design of advanced optical materials based on triplet states requires knowledge of the triplet energies of the molecular building blocks. To this end, we report the triplet energy of cyanostar (CS) macrocycles, which are the key structure-directing units of small-molecule ionic isolation lattices (SMILES) that have emerged as programmable optical materials. Cyanostar is a cyclic pentamer of covalently linked cyanostilbene units that form π-stacked dimers when binding anions as 2:1 complexes. The triplet energies, ET, of the parent cyanostar and its 2:1 complex around PF6- are measured to be 1.96 and 2.02 eV, respectively, using phosphorescence quenching studies at room temperature. The similarity of these triplet energies suggests that anion complexation leaves the triplet energy relatively unchanged. Similar energies (2.0 and 1.98 eV, respectively) were also obtained from phosphorescence spectra of the iodinated form, I-CS, and of complexes formed with PF6- and IO4- recorded at 85 K in an organic glass. Thus, measures of the triplet energies likely reflect geometries close to those of the ground state either directly by triplet energy transfer to the ground state or indirectly by using frozen media to inhibit relaxation. Density functional theory (DFT) and time-dependent DFT were undertaken on a cyanostar analogue, CSH, to examine the triplet state. The triplet excitation localizes on a single olefin whether in the single cyanostar or its π-stacked dimer. Restriction of the geometrical changes by forming either a dimer of macrocycles, (CSH)2, or a complex, (CSH)2·PF6-, reduces the relaxation resulting in an adiabatic energy of the triplet state of 2.0 eV. This structural constraint is also expected for solid-state SMILES materials. The obtained T1 energy of 2.0 eV is a key guide line for the design of SMILES materials for the manipulation of triplet excitons by triplet state engineering in the future.

Universal Concept for Bright, Organic, Solid-State Emitters─Doping of Small-Molecule Ionic Isolation Lattices with FRET Acceptors.

Brightly fluorescent solid-state materials are highly desirable for bioimaging, optoelectronic applications, and energy harvesting. However, the close contact between π-systems most often leads to quenching. Recently, we developed small-molecule ionic isolation lattices (SMILES) that efficiently isolate fluorophores while ensuring very high densities of the dyes. Nevertheless, efficient Förster resonance energy transfer (FRET) energy migration in such dense systems is inevitable. While attractive for energy harvesting applications, FRET also significantly compromises quantum yields of fluorescent solids by funneling the excitation energy to dark trap states. Here, we investigate the underlying property of FRET and exploit it to our favor by intentionally introducing fluorescent dopants into SMILES materials, acting as FRET acceptors with favorable photophysical properties. This doping is shown to outcompete energy migration to dark trap states while also ruling out reabsorption effects in dense SMILES materials, resulting in universal fluorescent solid-state materials (thin films, powders, and crystals) with superior properties. These include emission quantum yields reaching as high as 50-65%, programmable fluorescence lifetimes with mono-exponential decay, and independent selection of absorption and emission maxima. The volume normalized brightness of these FRET-based SMILES now reach values up to 32,200 M-1 cm-1 nm-3 and can deliver freely tunable spectroscopic properties for the fabrication of super-bright advanced optical materials. It is found that SMILES prohibit PET quenching between donor and acceptor dyes that is observed for non-SMILES mixtures of the same dyes. This allows a very broad selection of donor and acceptor dyes for use in FRET SMILES.

Templation and Concentration Drive Conversion Between a FeII12L12 Pseudoicosahedron, a FeII4L4 Tetrahedron, and a FeII2L3 Helicate.

We report the construction of three structurally distinct self-assembled architectures: FeII12L12 pseudoicosahedron 1, FeII2L3 helicate 2, and FeII4L4 tetrahedron 3, formed from a single triazatriangulenium subcomponent A under different reaction conditions. Pseudoicosahedral capsule 1 is the largest formed through subcomponent self-assembly to date, with an outer-sphere diameter of 5.4 nm and a cavity volume of 15 nm3. The outcome of self-assembly depended upon concentration, where the formation of pseudoicosahedron 1 was favored at higher concentrations, while helicate 2 exclusively formed at lower concentrations. The conversion of pseudoicosahedron 1 or helicate 2 into tetrahedron 3 occurred following the addition of a CB11H12- or B12F122- template.

Revealing the sensing mechanism of a fluorescent pH probe based on a bichromophore approach.

Fluorescence sensing plays an increasingly important role in biology and biomedicine. For many practical applications of fluorescent probes, an "off-on" response is preferred. The question of how fluorescence quenching/enhancement occurs is fundamental and of high importance for application and design of new fluorescent probes. The sensing mechanism of an aminorhodamine (TMARh) pH probe is investigated using femtosecond transient absorption spectroscopy and quantum chemical calculations, showing that this probe is best understood using the bichromophore model rather than the more common models such as photoinduced electron transfer or intramolecular charge transfer. Under excitation in the main absorption band at 530 nm, a fast internal conversion to the first excited state (S1) is observed for TMARh; meanwhile, no new transient components are obtained when TMARh is excited directly to S1 in the weakly absorbing red tail at 630 nm. It is confirmed that the S1 of TMARh is a dark "off" state. Theoretical calculations show that the S1 "off" state is an intramolecular charge transfer state from an aminophenyl group to a rhodamine chromophore. After protonation of the aminophenyl group, to yield HTMARh, the transient S2/S1 internal conversion process that occurs in TMARh under 530 nm excitation is absent, suggesting that the charge transfer state becomes highly unfavorable. All calculations and spectral data confirm that HTMARh has localized transition in the rhodamine chromophore, in agreement with this being the bright "on" state of the pH probe. The current work not only provides a photophysical insight into the sensing mechanism of this specific probe, but also shows that the bichromophore model is useful and may be relevant for analyzing other probes or in the designing of new ones.

Electronic Materials: An Antiaromatic Propeller Made from the Four-Fold Fusion of Tetraoxa[8]circulene and Perylene Diimides.

The synthesis of an antiaromatic tetraoxa[8]circulene annulated with four perylene diimides (PDI), giving a dynamic non-planar π-conjugated system, is described. The molecule contains 32 aromatic rings surrounding one formally antiaromatic planarized cyclooctatetraene (COT). The intense absorption (ϵ=3.35×105  M-1 cm-1 in CH2 Cl2 ) and emission bands are assigned to internal charge-transfer transitions in the combined PDI-circulene π-system. The spectroscopic data is supported by density functional theory calculations, and nuclear independent chemical shift calculation indicate that the antiaromatic COT has increased aromaticity in the reduced state. Electrochemical studies show that the compound can reversibly reach the tetra- and octa-anionic states by reduction of the four PDI units, and the deca-anionic state by reduction of the central COT ring. The material functions effectively in bulk hetero junction solar cells as a non-fullerene acceptor, reaching a power conversion efficiency of 6.4 %.

Rational Design of Bright Long Fluorescence Lifetime Dyad Fluorophores for Single Molecule Imaging and Detection.

Increasing demand for detecting single molecules in challenging environments has raised the bar for the fluorophores used. To achieve better resolution and/or contrast in fluorescence microscopy, it is now essential to use bright and stable dyes with tailored photophysical properties. While long fluorescence lifetime fluorophores offer many advantages in time-resolved imaging, their inherently lower molar absorption coefficient has limited applications in single molecule imaging. Here we propose a generic approach to prepare bright, long fluorescence lifetime dyad fluorophores comprising an absorbing antenna chromophore with high absorption coefficient linked to an acceptor emitter with a long fluorescence lifetime. We introduce a dyad consisting of a perylene antenna and a triangulenium emitter with 100% energy transfer from donor to acceptor. The dyad retained the long fluorescence lifetime (∼17 ns) and high quantum yield (75%) of the triangulenium emitter, while the perylene antenna increased the molar absorption coefficient (up to 5 times) in comparison to the free triangulenium dye. These triangulenium based dyads with significantly improved brightness can now be detected at the single molecule level and easily discriminated from bright autofluorescence by time-gated and other lifetime-based detection schemes.

Assessing The Key Photophysical Properties of Triangulenium Dyes for DNA Binding by Alteration of the Fluorescent Core.

Four-stranded G-quadruplex (G4) DNA is a non-canonical DNA topology that has been proposed to form in cells and play key roles in how the genome is read and used by the cellular machinery. Previously, a fluorescent triangulenium probe (DAOTA-M2) was used to visualise G4s in cellulo, thanks to its distinct fluorescence lifetimes when bound to different DNA topologies. Herein, the library of available triangulenium probes is expanded to explore how modifications to the fluorescent core of the molecule affect its photophysical characteristics, interaction with DNA and cellular localisation. The benzo-bridged and isopropyl-bridged diazatriangulenium dyes, BDATA-M2 and CDATA-M2 respectively, featuring ethyl-morpholino substituents, were synthesised and characterised. The interactions of these molecules with different DNA topologies were studied to determine their binding affinity, fluorescence enhancement and fluorescence lifetime response. Finally, the cellular uptake and localisation of these optical probes were investigated. Whilst structural modifications to the triangulenium core only slightly alter the binding affinity to DNA, BDATA-M2 and CDATA-M2 cannot distinguish between DNA topologies through their fluorescence lifetime. It is argued theoretically and experimentally that this is due to reduced effectiveness of photoinduced electron transfer (PET) quenching. This work presents valuable new evidence into the critical role of PET quenching when using the fluorescence lifetime of triangulenium dyes to discriminate G4 DNA from duplex DNA, highlighting the importance of fine tuning redox and spectral properties when developing new triangulenium-based G4 probes.

Utilizing Selective Chlorination to Synthesize New Triangulenium Dyes.

Functionalization of new sites on the triangulenium structure has been achieved by early-stage chlorination with N-chlorosuccinimide (NCS), giving rise to two new triangulenium dyes (1 and 3). By introducing the chlorine functionalities in the acridinium precursor, positions complementary to those previously obtained by electrophilic aromatic substitution on the final dyes are accessed. The chlorination is selective, giving only one regioisomer for both mono- and dichlorination products. For the monochlorinated acridinium compound, a highly selective ring-closing reaction was discovered, generating a single regioisomer of the cationic [4]helicene product. Further investigations into the mechanism of the [4]helicene formation lead to the first isolation of the previously proposed intermediate of the two-step SNAr reaction, key to all aza-bridged triangulenium and helicenium systems. Late-stage functionalization of DAOTA+ with NCS gave rise to a different dichlorinated compound (2). The fully ring closed chlorinated triangulenium dyes 1, 2, and 3 show a redshift in absorption and emission, while maintaining relatively high fluorescence quantum yields of 36%, 26%, and 41% and long fluorescence lifetimes of 15, 12.5, and 16 ns, respectively. Cyclic voltammetry shows that chlorination of the triangulenium dyes significantly lowers reduction potentials and thus allows for efficient tuning of redox and photoredox properties.

Ultrabright Fluorescent Organic Nanoparticles Based on Small-Molecule Ionic Isolation Lattices*.

Ultrabright fluorescent nanoparticles (NPs) hold great promise for demanding bioimaging applications. Recently, extremely bright molecular crystals of cationic fluorophores were obtained by hierarchical coassembly with cyanostar anion-receptor complexes. These small-molecule ionic isolation lattices (SMILES) ensure spatial and electronic isolation to prohibit aggregation quenching of dyes. We report a simple, one-step supramolecular approach to formulate SMILES materials into NPs. Rhodamine-based SMILES NPs stabilized by glycol amphiphiles show high fluorescence quantum yield (30 %) and brightness per volume (5000 M-1 cm-1 /nm3 ) with 400 dye molecules packed into 16-nm particles, corresponding to a particle absorption coefficient of 4×107  M-1 cm-1 . UV excitation of the cyanostar component leads to higher brightness (>6000 M-1 cm-1 / nm3 ) by energy transfer to rhodamine emitters. Coated NPs stain cells and are thus promising for bioimaging.

What is Best Strategy for Water Soluble Fluorescence Dyes?-A Case Study Using Long Fluorescence Lifetime DAOTA Dyes*.

The lipophilic nature of organic dyes complicates their effectiveness in aqueous solutions. In this work we investigate three different strategies for achieving water-solubility of the diazaoxatriangulenium (DAOTA+ ) chromophore: hydrophilic counter ions, aromatic sulfonation of the chromophore, and attachment of charged side chains. The long fluorescence lifetime (FLT, τf =20 ns) of DAOTA+ makes it a sensitive probe to analyze solvation and aggregation effects. Direct sulfonation of the chromophore was found to increase solubility drastically, but at the cost of greatly reduced quantum yields (QYs) due to enhanced non-radiative deactivation processes. The introduction of either cationic (4) or zwitterionic side chains (5), however, brings the FLT (τf =18 ns) and QY (ϕf =0.56) of the dye to the same level as the parent chromophore in acetonitrile. Time-resolved fluorescence spectroscopy also reveals a high resistance to aggregation and non-specific binding in a high loading of bovine serum albumin (BSA). The results clearly show that addition of charged flexible side chains is preferable to direct sulfonation of the chromophore core.

Luminescence Spectroscopy of Rhodamine Homodimer Dications in Vacuo Reveals Strong Dye-Dye Interactions.

Being alone or together makes a difference for the photophysics of dyes but for ionic dyes it is difficult to quantify the interactions due to solvent screening and nearby counter ions. Gas-phase luminescence experiments are desirable and now possible based on recent developments in mass spectrometry. Here we present results on tailor-made rhodamine homodimers where two dye cations are separated by methylene linkers, (CH2 )n . In solution the fluorescence is almost identical to that from the monomer whereas the emission from bare cation dimers redshifts with decreasing n. In the absence of screening, the electric field from the charge on one dye is strong enough to polarize the other dye, both in the ground state and in the excited state. An electrostatic model based on symmetric dye responses (equal induced-dipole moments in ground state) captures the underlying physics and demonstrates interaction even at large distances. Our results have possible implications for gas-phase Förster Resonance Energy Transfer.

Extended Triangulenium Ions: Syntheses and Characterization of Benzo-Bridged Dioxa- and Diazatriangulenium Dyes.

The very limited class of fluorophores, with a long fluorescence lifetime (>10 ns) and fluorescence beyond 550 nm, has been expanded with two benzo-fused triangulenium derivatives and two cationic [5]-helicene salts. The syntheses of the benzo-bridged dioxa- and diazatriangulenium derivatives (BDOTA+ and BDATA+, respectively) required two different synthetic approaches, which reflect the structural and physiochemical impact on the reactivity of [5]-helicenium precursors. Spectroscopic investigations show that the introduction of the benzo bridge into the triangulenium chromophore significantly redshifts the absorption and emission while maintaining fluorescence lifetimes above 10 ns. The combination of a high quantum yield, long fluorescence lifetime, and emission above 600 nm is possible only if the structural aspects of the triangulenium framework are perfectly harmonized to secure a low rate of nonradiative deactivation. The new benzo bridge may be a general motif to obtain red-shifted derivatives of other dye classes.

Spectral shifts of BODIPY derivatives: a simple continuous model.

The BODIPY dyes are a versatile family of chromophores that have found use in fluorescence based bioimaging and other applications. The BODIPY core can be substituted in a vast number of ways, but the photophysical changes, such as shifts in absorption spectra, are not always immediately obvious from the molecular structure. We introduce a simple model that let you vary the electron withdrawing or electron donating character of each substituent continuously to get an overview of the landscape of possible spectral shifts. The features of substituted BODIPY cores are compared to the corresponding linear system, giving a new perspective on BODIPY photophysics. Using the model, we are able to rationalize the trend seen in a family of BODIPY, with chalcogen-containing substituents, as being due to a change in electronegativity.