High-Performance Pressure Sensors Based on Shaped Gel Droplet Arrays.

Polymer gel-based pressure sensors offer numerous advantages over traditional sensing technologies, including excellent conformability and integration into wearable devices. However, challenges persist in terms of their performance and manufacturing technology. In this study, a method for fabricating gel pressure sensors using a hydrophobic/hydrophilic patterned surface is introduced. By shaping and fine-tuning the droplets of the polymer gel prepolymerization solution on the patterned surface, remarkable sensitivity improvements compared to unshaped hydrogels have been achieved. This also showcased the potential for tailoring gel pressure sensors to different applications. By optimizing the configuration of the sensor array, an uneven conductive gel array is fabricated, which exhibited a high sensitivity of 0.29 kPa-1 in the pressure range of 0-30 kPa, while maintaining a sensitivity of 0.13 kPa-1 from 30 kPa up to 100 kPa. Furthermore, the feasibility of using these sensors for human motion monitoring is explored and a conductive gel array for 2D force detection is successfully developed. This efficient and scalable fabrication method holds promise for advancing pressure sensor technology and offers exciting prospects for various industries and research fields.

Palladium-Catalyzed Combinatorial Synthesis of Biphenyls on Droplet Microarrays at Nanoliter Scale.

The rising costs of pharmaceutical research are currently limiting the productivity of drug discovery and development, but can potentially be diminished via miniaturization of the synthesis and screening of new compounds. As droplet microarrays already present themselves as a versatile tool for highly miniaturized biological screening of various targets, their use for chemical synthesis is still limited. In this study, the influential palladium-catalyzed Suzuki-Miyaura reaction is successfully implemented at the nanoliter scale on droplet microarrays for the synthesis of an 800-compound library of biphenyls. Each reaction is carried out in individual 150 nL droplets. Remarkably, the synthesis of these 800 compounds requires a minimal amount of reagents, totaling 80 µmol, and a solvent volume of 400 µL. Furthermore, the cleavage kinetics and purity of the obtained biphenylic compounds are investigated. Via the solid-phase synthesis approach, the compounds could be purified from excess reactants and catalyst prior to the analysis and a UV-cleavable linker allows for fast and additive-free cleavage of each compound into the individual 100 nL droplet. This novel approach expands the toolbox of the droplet microarray for miniaturized high-throughput chemical synthesis and paves the way for future synthesis and screening of chemical compounds in a single platform.

High-Throughput Miniaturized Synthesis of PROTAC-Like Molecules.

The development of miniaturized high-throughput in situ screening platforms capable of handling the entire process of drug synthesis to final screening is essential for advancing drug discovery in the future. In this study, an approach based on combinatorial solid-phase synthesis, enabling the efficient synthesis of libraries of proteolysis targeting chimeras (PROTACs) in an array format is presented. This on-chip platform allows direct biological screening without the need for transfer steps.  UV-induced release of target molecules into individual droplets facilitates further on-chip experimentation. Utilizing a mitogen-activated protein kinase kinases (MEK1/2) degrader as a template, a series of 132 novel PROTAC-like molecules is synthesized using solid-phase Ugi reaction. These compounds are further characterized using various methods, including matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) imaging, while consuming only a few milligrams of starting materials in total. Furthermore, the feasibility of culturing cancer cells on the modified spots and quantifying the effect of MEK suppression is demonstrated. The miniaturized synthesis platform lays a foundation for high-throughput in situ biological screening of potent PROTACs for potential anticancer activity and offers the potential for accelerating the drug discovery process by integrating miniaturized synthesis and biological steps on the same array.

Wetting Behavior of Inkjet-Printed Electronic Inks on Patterned Substrates.

In inkjet printing technology, one important factor influencing the printing quality and reliability of printed films is the interaction of the jetted ink with the substrate surface. This short-range interaction determines the wettability and the adhesion of the ink to the solid surface and is hence responsible for the final shape of the deposited ink. Here, we investigate wetting morphologies of inkjet-printed inks on patterned substrates by carefully designed experimental test structures and simulations. The contact angles, the surface properties, and drop shapes, as well as their influence on the device variability, are experimentally and theoretically analyzed. For the simulations, we employ the phase-field method, which is based on the free energy minimization of the two-phase system with the given wetting boundary conditions. Through a systematic investigation of printed drops on patterned substrates consisting of hydrophilic and hydrophobic areas, we report that the printed morphology is related not only to the designed layout and the drop volume but also to the printing strategy and the wettability. Furthermore, we show how one can modify the intrinsic wettability of the patterned substrates to enhance the printing quality and reliability. Based on the present findings, we cast light on the improvement of the fabrication quality of thin film transistors.

Nanoliter Scale Parallel Liquid-Liquid Extraction for High-Throughput Purification on a Droplet Microarray.

In the current drug discovery process, the synthesis of compound libraries is separated from biological screenings both conceptually and technologically. One of the reasons is that parallel on-chip high-throughput purification of synthesized compounds is still a major challenge. Here, on-chip miniaturized high-throughput liquid-liquid extraction in volumes down to 150 nL with efficiency comparable to or better than large-scale extraction utilizing separation funnels is demonstrated. The method is based on automated and programmable merging of arrays of aqueous nanoliter droplets with organic droplets. Multi-step extraction performed simultaneously or with changing conditions as well as handling of femtomoles of compounds are demonstrated. In addition, the extraction efficiency is analyzed with a fast optical readout as well as matrix-assisted laser desorption ionization-mass spectrometry on-chip detection. The new massively parallel and miniaturized purification method adds another important tool to the chemBIOS concept combining chemical combinatorial synthesis with biological screenings on the same miniaturized droplet microarray platform, which will be essential to accelerate drug discovery.

Further Dimensions for Sensing in Biofluids: Distinguishing Bioorganic Analytes by the Salt-Induced Adaptation of a Cucurbit[7]uril-Based Chemosensor.

Insufficient binding selectivity of chemosensors often renders biorelevant metabolites indistinguishable by the widely used indicator displacement assay. Array-based chemosensing methods are a common workaround but require additional effort for synthesizing a chemosensor library and setting up a sensing array. Moreover, it can be very challenging to tune the inherent binding preference of macrocyclic systems such as cucurbit[n]urils (CBn) by synthetic means. Using a novel cucurbit[7]uril-dye conjugate that undergoes salt-induced adaptation, we now succeeded in distinguishing 14 bioorganic analytes from each other through the facile stepwise addition of salts. The salt-specific concentration-resolved emission provides additional information about the system at a low synthetic effort. We present a data-driven approach to translate the human-visible curve differences into intuitive pairwise difference measures. Ion mobility experiments combined with density functional theory calculations gave further insights into the binding mechanism and uncovered an unprecedented ternary complex geometry for CB7. TThis work introduces the non-selectively binding, salt-adaptive cucurbit[n]uril system for sensing applications in biofluids such as urine, saliva, and blood serum.

Wavelength Orthogonal Photodynamic Networks.

The ability of light to remotely control the properties of soft matter materials in a dynamic fashion has fascinated material scientists and photochemists for decades. However, only recently has our ability to map photochemical reactivity in a finely wavelength resolved fashion allowed for different colors of light to independently control the material properties of polymer networks with high precision, driven by monochromatic irradiation enabling orthogonal reaction control. The current concept article highlights the progress in visible light-induced photochemistry and explores how it has enabled the design of polymer networks with dynamically adjustable properties. We will explore current applications ranging from dynamic hydrogel design to the light-driven adaptation of 3D printed structures on the macro- and micro-scale. While the alternation of mechanical properties via remote control is largely reality for soft matter materials, we herein propose the next frontiers for adaptive properties, including remote switching between conductive and non-conductive properties, hydrophobic and hydrophilic surfaces, fluorescent or non-fluorescent, and cell adhesive vs. cell repellent properties.

Inverse Vulcanization of Norbornenylsilanes: Soluble Polymers with Controllable Molecular Properties via Siloxane Bonds.

The inverse vulcanization produces high sulfur content polymers from alkenes and elemental sulfur. Control over properties such as the molar mass or the solubility of polymers is not well established, and existing strategies lack predictability or require large variations of the composition. Systematic design principles are sought to allow for a targeted design of materials. Herein, we report on the inverse vulcanization of norbornenylsilanes (NBS), with a different number of hydrolysable groups at the silicon atom. Inverse vulcanization of mixtures of NBS followed by polycondensation yielded soluble high sulfur content copolymers (50 wt % S) with controllable weight average molar mass (MW ), polydispersity (D), glass transition temperature (TG ), or zero-shear viscosity (η0 ). Polycondensation was conducted in the melt with HCl as a catalyst, abolishing the need for a solvent. Purification by precipitation afforded polymers with a greatly reduced amount of low molar mass species.

eGFP-tagged Wnt-3a enables functional analysis of Wnt trafficking and signaling and kinetic assessment of Wnt binding to full-length Frizzled.

The Wingless/Int1 (Wnt) signaling system plays multiple, essential roles in embryonic development, tissue homeostasis, and human diseases. Although many of the underlying signaling mechanisms are becoming clearer, the binding mode, kinetics, and selectivity of 19 mammalian WNTs to their receptors of the class Frizzled (FZD1-10) remain obscure. Attempts to investigate Wnt-FZD interactions are hampered by the difficulties in working with Wnt proteins and their recalcitrance to epitope tagging. Here, we used a fluorescently tagged version of mouse Wnt-3a for studying Wnt-FZD interactions. We observed that the enhanced GFP (eGFP)-tagged Wnt-3a maintains properties akin to wild-type (WT) Wnt-3a in several biologically relevant contexts. The eGFP-tagged Wnt-3a was secreted in an evenness interrupted (EVI)/Wntless-dependent manner, activated Wnt/ß-catenin signaling in 2D and 3D cell culture experiments, promoted axis duplication in Xenopus embryos, stimulated low-density lipoprotein receptor-related protein 6 (LRP6) phosphorylation in cells, and associated with exosomes. Further, we used conditioned medium containing eGFP-Wnt-3a to visualize its binding to FZD and to quantify Wnt-FZD interactions in real time in live cells, utilizing a recently established NanoBRET-based ligand binding assay. In summary, the development of a biologically active, fluorescent Wnt-3a reported here opens up the technical possibilities to unravel the intricate biology of Wnt signaling and Wnt-receptor selectivity.

Controlling Geometry and Flow Through Bacterial Bridges on Patterned Lubricant-Infused Surfaces (pLIS).

Spatial control of bacteria and biofilms on surfaces is necessary to understand the biofilm formation and the social interactions between bacterial communities, which could provide useful hints to study the biofilm-involved diseases. Here patterned lubricant-infused surfaces (pLIS) are utilized to fabricate connective structures named "bacterial bridges" between bacterial colonies of Pseudomonas aeruginosa by a simple dewetting method. It is demonstrated that the bacteria attached to hydrophilic areas and bacteria precipitated on lubricant infused borders both contribute to the formation of bacterial bridges. The geometry and distribution of bridges can be controlled using predesigned superhydrophobic-hydrophilic patterns. It is demonstrated that bacterial bridges connecting bacteria colonies act as bio-microfluidic channels and can transport liquids, nutrients, and antibacterial substances between neighboring bacteria clusters. Thus, bacterial bridges can be used to study formation, spreading, and development of bacterial colonies, and communication within and between isolated biofilms.

Nanomolar Synthesis in Droplet Microarrays with UV-Triggered On-Chip Cell Screening.

Miniaturization and parallelization of combinatorial organic synthesis is important to accelerate the process of drug discovery while reducing the consumption of reagents and solvents. This work presents a miniaturized platform for on-chip solid-phase combinatorial library synthesis with UV-triggered on-chip cell screening. The platform is based on a nanoporous polymer coating on a glass slide, which is modified via photolithography to yield arrays of hydrophilic (HL) spots surrounded by superhydrophobic (SH) surface. The combination of HL spots and SH background enables confinement of nanoliter droplets, functioning as miniaturized reactors for the solid-phase synthesis. The polymer serves as support for nanomolar solid-phase synthesis, while a photocleavable linker enables the release of the synthesized compounds into the droplets containing live cells. A 588 compound library of bisamides is synthesized via a four-component Ugi reaction on the chip and products are detected via stamping of the droplet array onto a conductive substrate and subsequent matrix-assisted laser desorption ionization mass spectrometry. The light-induced cleavage shows high flexibility in screening conditions by spatial, temporal, and quantitative control.

Combinatorial Synthesis of a Lipidoid Library by Thiolactone Chemistry: In Vitro Screening and In Vivo Validation for siRNA Delivery.

Transcriptional inhibition by small interfering RNA (siRNA) delivery using synthetic transfection agents eliminates the subsequent risk of introducing mutations in relevant genes, as opposed to viral vectors. However, synthetic vectors with comparable transfection efficiency to that of viral vectors are yet to be developed. Hence, synthesizing new transfection vehicles with low toxicity is important. In this study, a library of lipid-like molecules (lipidoids) was synthesized by thiolactone chemistry. This library facilitated nonviral delivery of siRNA to mammalian cells, inducing sequence-specific knockdown of a target gene. The liposomal nanoparticles complexed with anti-green fluorescent protein (GFP) siRNA were successfully screened for transfection efficiency using a HeLa-GFP cell line. The five best-performing lipidoids identified in the screening were found to exhibit superior GFP-knockdown efficiency compared with commercially available transfection reagents. The efficiency of siRNA delivery by one of these lipidoids with minimal toxicity was further successfully evaluated in vivo using Kdrl:EGFP zebrafish embryos as a model system. Our study would be important as a facile synthetic route of efficient nonviral nucleic acid delivery to live cells and organisms.

Inverse Vulcanization of Styrylethyltrimethoxysilane-Coated Surfaces, Particles, and Crosslinked Materials.

Sulfur as a side product of natural gas and oil refining is an underused resource. Converting landfilled sulfur waste into materials merges the ecological imperative of resource efficiency with economic considerations. A strategy to convert sulfur into polymeric materials is the inverse vulcanization reaction of sulfur with alkenes. However, the materials formed are of limited applicability, because they need to be cured at high temperatures (>130 °C) for many hours. Herein, we report the reaction of elemental sulfur with styrylethyltrimethoxysilane. Marrying the inverse vulcanization and silane chemistry yielded high sulfur content polysilanes, which could be cured via room temperature polycondensation to obtain coated surfaces, particles, and crosslinked materials. The polycondensation was triggered by hydrolysis of poly(sulfur-r-styrylethyltrimethoxysilane) (poly(Sn -r-StyTMS) under mild conditions (HCl, pH 4). For the first time, an inverse vulcanization polymer could be conveniently coated and mildly cured via post-polycondensation. Silica microparticles coated with the high sulfur content polymer could improve their Hg2+ ion remediation capability.

Facile One Step Formation and Screening of Tumor Spheroids Using Droplet-Microarray Platform.

Tumor spheroids or microtumors are important 3D in vitro tumor models that closely resemble a tumor's in vivo "microenvironment" compared to 2D cell culture. Microtumors are widely applied in the fields of fundamental cancer research, drug discovery, and precision medicine. In precision medicine tumor spheroids derived from patient tumor cells represent a promising system for drug sensitivity and resistance testing. Established and commonly used platforms for routine screenings of cell spheroids, based on microtiter plates of 96- and 384-well formats, require relatively large numbers of cells and compounds, and often lead to the formation of multiple spheroids per well. In this study, an application of the Droplet Microarray platform, based on hydrophilic-superhydrophobic patterning, in combination with the method of hanging droplet, is demonstrated for the formation of highly miniaturized single-spheroid-microarrays. Formation of spheroids from several commonly used cancer cell lines in 100 nL droplets starting with as few as 150 cells per spheroid within 24-48 h is demonstrated. Established methodology carries a potential to be adopted for routine workflows of high-throughput compound screening in 3D cancer spheroids or microtumors, which is crucial for the fields of fundamental cancer research, drug discovery, and precision medicine.

Facilitating an International Research Experience Focused on Applied Nanotechnology and Surface Chemistry for American Undergraduate Students Collaborating with Mentors at a German Educational and Research Institution.

The "International Research Experience for Students (IRES)" at Doane University (DU) located in Crete, Nebraska, exposed undergraduate science, technology, engineering, and mathematics (STEM) students to international research at the Karlsruhe Institute of Technology (KIT) in Germany. The international collaboration team included three undergraduate researchers per year from DU, one faculty member and one postdoctoral fellow from DU, two faculty mentors at KIT, and several graduate, post-doctoral, and technical staff at KIT. Prior to departure to Germany, the students received extensive research training, as well as culture and language preparation from the mentors at DU. While in Germany, the students received an in-depth orientation to Karlsruhe, Germany, Europe, the research setting at KIT, and the international collaborators. The eight week summer projects over three years involved nanolithography, nano- to microsized array fabrication, organic synthesis using click chemistry, and surface modifications for sensing and other biomedical research applications. When the students returned from Germany, they continued to conduct research at DU and train other undergraduate students using the expertise acquired from KIT. The DU research students, including the IRES scholars, learned oral and written communication skills. They presented their KIT and DU research results at weekly seminars and at local and national meetings. An external assessment firm evaluated the program, the students, and mentors on a yearly basis before and after the summer research. This enabled all participants to continuously improve the learning objectives and the program execution including three program adjustments implemented in year 2 or 3. The survey data shows that the IRES program provided an enriching experience for the students in research and international culture and established a successful base of collaboration for mentors.

Improved Extraction Repeatability and Spectral Reproducibility for Liquid Extraction Surface Analysis-Mass Spectrometry Using Superhydrophobic-Superhydrophilic Patterning.

A major problem limiting reproducible use of liquid extraction surface analysis (LESA) array sampling of dried surface-deposited liquid samples is the unwanted spread of extraction solvent beyond the dried sample limits, resulting in unreliable data. Here, we explore the use of the Droplet Microarray (DMA), which consists of an array of superhydrophilic spots bordered by a superhydrophobic material giving the potential to confine both the sample spot and the LESA extraction solvent in a defined area. We investigated the DMA method in comparison with a standard glass substrate using LESA analysis of a mixture of biologically relevant compounds with a wide mass range and different physicochemical properties. The optimized DMA method was subsequently applied to urine samples from a human intervention study. Relative standard deviations for the signal intensities were all reduced at least 3-fold when performing LESA-MS on the DMA surface compared with a standard glass surface. Principal component analysis revealed more tight clusters indicating improved spectral reproducibility for a human urine sample extracted from the DMA compared to glass. Lastly, in urine samples from an intervention study, more significant ions (145) were identified when using LESA-MS spectra of control and test urine extracted from the DMA. We demonstrate that DMA provides a surface-assisted LESA-MS method delivering significant improvement of the surface extraction repeatability leading to the acquisition of more robust and higher quality data. The DMA shows potential to be used for LESA-MS for controlled and reproducible surface extraction and for acquisition of high quality, qualitative data in a high-throughput manner.

One-Pot Parallel Synthesis of Lipid Library via Thiolactone Ring Opening and Screening for Gene Delivery.

Efficient delivery of nucleic acids into cells is of great interest in the field of cell biology and gene therapy. Despite a lot of research, transfection efficiency and structural diversity of gene-delivery vectors are still limited. A better understanding of the structure-function relationship of gene delivery vectors is also essential for the design of novel and intelligent delivery vectors, efficient in "difficult-to-transfect" cells and in vivo clinical applications. Most of the existing strategies for the synthesis of gene-delivery vectors require multiple steps and lengthy procedures. Here, we demonstrate a facile, three-component one-pot synthesis of a combinatorial library of 288 structurally diverse lipid-like molecules termed "lipidoids" via a thiolactone ring opening reaction. This strategy introduces the possibility to synthesize lipidoids with hydrophobic tails containing both unsaturated bonds and reducible disulfide groups. The whole synthesis and purification are convenient, extremely fast, and can be accomplished within a few hours. Screening of the produced lipidoids using HEK293T cells without addition of helper lipids resulted in identification of highly stable liposomes demonstrating ∼95% transfection efficiency with low toxicity.

Nanoliter deposition on star-shaped hydrophilic-superhydrophobic patterned surfaces.

Nanoliter sized droplet deposition has gained increasing importance in many biomedical, chemical, and microfluidic applications and in materials synthesis. In this paper, we report a simple method for rapid and high-throughput deposition of nanoliter-sized droplets by dragging a larger droplet on star-shaped hydrophilic-superhydrophobic patterned surfaces. Dragging a droplet on the patterned surface causes water to adhere to hydrophilic patterns. As the larger mother droplet detaches from a star-shaped pattern, a small daughter droplet is deposited on the pattern. Star-shaped hydrophilic patterns with a distinct number of spikes are fabricated and investigated. Systematic tests are carried out to study the influence of different process parameters including the volume of a mother droplet, the dragging velocity, the number of spikes and the dragging directions to the deposition process. The results indicate that creating microarrays by dragging large droplets on patterned hydrophilic-superhydrophobic surfaces yield a reliable, cost-efficient, high-accuracy and easily scalable deposition. The volume of the daughter droplet grows with the velocity of the mother droplet and the number of spikes in a pattern, and decreases with the volume of the mother droplet.

Free-standing three-dimensional hollow bacterial cellulose structures with controlled geometry via patterned superhydrophobic-hydrophilic surfaces.

Bacteria can produce cellulose, one of the most abundant biopolymer on earth, and emerge as an interesting candidate to fabricate advanced materials. Cellulose produced by Komagataeibacter Xylinus, a bacterial strain, is a pure water insoluble biopolymer, without hemicellulose or lignin. Bacterial cellulose (BC) exhibits a nanofibrous porous network microstructure with high strength, low density and high biocompatibility and it has been proposed as cell scaffold and wound healing material. The formation of three dimensional (3D) cellulose self-standing structures is not simple. It either involves complex multi-step synthetic procedures or uses chemical methods to dissolve cellulose and remold it. Here we present an in situ single-step method to produce self-standing 3D-BC structures with controllable wall thickness, size and geometry in a reproducible manner. Parameters such as hydrophobicity of the surfaces, volume of the inoculum and time of culture define the resulting 3D-BC structures. Hollow spheres and convex domes can be easily obtained by changing the surface wettability. The potential of these structures as a 3D cell scaffold is exemplified supporting the growth of mouse embryonic stem cells within a hollow spherical BC structure, indicating its biocompatibility and future prospective.

High-Density Droplet Microarray of Individually Addressable Electrochemical Cells.

Microarray technology has shown great potential for various types of high-throughput screening applications. The main read-out methods of most microarray platforms, however, are based on optical techniques, limiting the scope of potential applications of such powerful screening technology. Electrochemical methods possess numerous complementary advantages over optical detection methods, including its label-free nature, capability of quantitative monitoring of various reporter molecules, and the ability to not only detect but also address compositions of individual compartments. However, application of electrochemical methods for the purpose of high-throughput screening remains very limited. In this work, we develop a high-density individually addressable electrochemical droplet microarray (eDMA). The eDMA allows for the detection of redox-active reporter molecules irrespective of their electrochemical reversibility in individual nanoliter-sized droplets. Orthogonal band microelectrodes are arranged to form at their intersections an array of three-electrode systems for precise control of the applied potential, which enables direct read-out of the current related to analyte detection. The band microelectrode array is covered with a layer of permeable porous polymethacrylate functionalized with a highly hydrophobic-hydrophilic pattern, forming spatially separated nanoliter-sized droplets on top of each electrochemical cell. Electrochemical characterization of single droplets demonstrates that the underlying electrode system is accessible to redox-active molecules through the hydrophilic polymeric pattern and that the nonwettable hydrophobic boundaries can spatially separate neighboring cells effectively. The eDMA technology opens the possibility to combine the high-throughput biochemical or living cell screenings using the droplet microarray platform with the sequential electrochemical read-out of individual droplets.