Tailored modifications of the electronic properties of g-C3N4/C2N-h2D nanoribbons by first-principles calculations.

The electronic structure of g-C3N4/C2N-h2D nanoribbons was investigated by first-principles calculations. As a splice structure, we first computed the three magnetic coupled states of g-C3N4/C2N-h2D nanoribbons. After self-consistent calculations, both the antiferromagnetic and paramagnetic coupling states become ferromagnetic coupling states. It was proved that the ferromagnetic coupling state is the most stable state. Thermodynamic stability was subsequently verified based on the ferromagnetic coupling state. It had a steady electron spin polarization, with a magnetic moment of 1 µB for each primitive cell. It changed from a direct band-gap semiconductor to an indirect band-gap semiconductor and exhibited the properties of a narrow band gap semiconductor through the analysis of the energy band and charge density. To transform the electronic structure, we adsorbed different transition metals in g-C3N4/C2N-h2D nanoribbons. We investigated the electronic structure of g-C3N4/C2N-h2D nanoribbons adsorbed by different transition metals. It was shown that the electronic structure of g-C3N4/C2N-h2D nanoribbons could be regulated by the adsorption of different transition metal atoms. Moreover, the adsorption of Fe and Ni can generate a 100% polarized current in the Fermi surface, which will provide more application potential for spintronics devices.

The metal atomic substitution induced half-metallic properties, metallic properties and semiconducting properties in X-N4 nanoribbons.

Armchair X-N4 nanoribbons (X-AN4NRs) and zigzag X-N4 nanoribbons (X-ZN4NRs) were calculated using first-principles calculations. Ferromagnets (FM) were found to be the most stable among the initial magnetic structures. Furthermore, nanoribbons were found to be thermodynamically stable through molecular dynamics simulations. It can be found that when the temperature and total energy of X-AN4NRs and X-ZN4NRs change with time, they have a small oscillation range, which confirms the dynamic stability of X-AN4NRs and X-ZN4NRs under realistic experimental conditions. Subsequently, the magnetic moment analysis of the X-AN4NRs and X-ZN4NRs revealed that the magnetic moment of the X-AN4NRs is significantly smaller than that of X-ZN4NRs. The band structure and density of states (DOS) of the X-AN4NRs and X-ZN4NRs were also computed, which indicate different properties for different transition metal nanoribbons. The results suggest that different edge structures and transition metals can influence the electronic structure of the nanoribbons. Moreover, based on the band structure and DOS, it was found that Mn-AN4NRs and Fe-ZN4NRs exhibit half-metallic properties. They can generate 100% polarized currents at the Fermi level, providing valuable information for developing spintronic devices. Our study has a positive value for regulating the properties of the nanoribbons by metal atom substitution.

Doping atom improves photocatalytic performance in a new metal-free organic photocatalyst for water splitting.

Photocatalytic water splitting, using solar energy to obtain hydrogen, is an ideal technology for producing new energy. In the process of photocatalysis, the improvement of the catalytic performance of the catalysts used is a matter of great concern to scientists. So far, there are many problems preventing improvements in photocatalytic performance. In this paper, we propose an atom-doping method, which is an effective method to improve the catalytic performance. We present a type of graphene-like carbon nitride material, whose primitive cell is composed of 12 carbon atoms and 14 nitrogen atoms, so it is denoted as g-C12N14. The energy band, density of states, and optical absorption spectrum of g-C12N14 have been studied using first-principles calculations. From the characteristics of these properties, it is concluded that g-C12N14 can be used as a photocatalyst, but its catalytic performance is low. To improve the catalytic performance, atom doping has been used, which can change the electronic state of the surface to enhance the activity of the photocatalyst. It was calculated that the doped phosphorus and boron system improved the optical absorption range, thus improving the photocatalytic efficiency. To make the results more accurate, all the calculations used the computationally-large HSE06 hybrid functional method.

Electron momentum density of boron-doped carbon nano-onions studied by electron energy-loss spectroscopy.

Valence Compton profiles (CPs) (electron momentum density projections) of B-doped carbon nano-onions (CNOs) as a function of the boron doping content were obtained by recording electron energy-loss spectra at large scattering angles using a transmission electron microscope, a technique known as electron Compton scattering from solids (ECOSS). The amplitude of the CPs at zero momentum increases with increasing doping content, while the shape of the CPs becomes narrower with increasing doping content. The differences between the profiles of B-doped CNOs and that of pristine CNOs have been clearly observed. These experimental results indicate substantially greater delocalization of the ground-state charge density in B-doped CNOs than in pristine CNOs. The results clearly demonstrate that the ECOSS technique is an efficient and reliable experimental method for studying electron density distributions in solids as a function of the heteroatom doping content.

ReaxFF-MPNN machine learning potential: a combination of reactive force field and message passing neural networks.

Reactive force field (ReaxFF) is a powerful computational tool for exploring material properties. In this work, we proposed an enhanced reactive force field model, which uses message passing neural networks (MPNN) to compute the bond order and bond energies. MPNN are a variation of graph neural networks (GNN), which are derived from graph theory. In MPNN or GNN, molecular structures are treated as a graph and atoms and chemical bonds are represented by nodes and edges. The edge states correspond to the bond order in ReaxFF and are updated by message functions according to the message passing algorithms. The results are very encouraging; the investigation of the potential, such as the potential energy surface, reaction energies and equation of state, are greatly improved by this simple improvement. The new potential model, called reactive force field with message passing neural networks (ReaxFF-MPNN), is provided as an interface in an atomic simulation environment (ASE) with which the original ReaxFF and ReaxFF-MPNN potential models can do MD simulations and geometry optimizations within the ASE. Furthermore, machine learning, based on an active learning algorithm and gradient optimizer, is designed to train the model. We found that the active learning machine not only saves the manual work to collect the training data but is also much more effective than the general optimizer.

Investigation of Electron Momentum Density in Carbon Nanotubes Using Transmission Electron Microscopy.

Valence Compton profiles (CPs) of multiwall (MWCNTs) and single-wall carbon nanotubes (SWCNTs) were obtained by recording electron energy-loss spectra at large momentum transfer in the transmission electron microscope, a technique known as electron Compton scattering from solids (ECOSS). The experimental MWCNT/SWCNT results were compared with that of graphite. Differences between the valence CPs of MWCNTs and SWCNTs were observed, and the SWCNT CPs indicate a greater delocalization of the ground-state charge density compared to graphite. The results clearly demonstrate the feasibility and potential of the ECOSS technique as a complementary tool for studying the electronic structure of materials with nanoscale spatial resolution.

Tensile strain induced half-metallicity in graphene-like carbon nitride.

Polymeric graphitic carbon nitride materials exhibit exotic properties superior to graphene which are promising for applications in energy conversion, environment protection, and spintronics devices. We propose a two-dimensional (2D) framework of graphene-like carbon nitride composing of C9N7 units connected by nitrogen atoms. From first-principles, we demonstrate that this 2D carbon nitride has a spin-polarized ground state and exhibits metallic electronic properties, in contrast to commonly studied graphitic carbon nitrides which are nonmagnetic semiconductors. Additionally, half-metallicity can be achieved in this framework by applying tensile strain. The realization will be beneficial for spintronics as a candidate material for a spin-current generator. More importantly, this provides a feasible way to realize half-metallicity in experiments.

Synthesize magnetic ZnFe2O4@C/Cd0.9Zn0.1S catalysts with S-scheme heterojunction to achieve extraordinary hydrogen production efficiency.

Suppressing the electron-hole recombination rate of catalyst legitimately is one of the effective strategies to improve photocatalytic hydrogen evolution. Herein, carbon-coated metal oxide, ZnFe2O4@C (ZFO@C), nanoparticles were synthesized and employed to couple with quadrupedal Cd0.9Zn0.1S (CZS) via an ordinary ultrasonic self-assembly method combined with calcination to form a novel ZFO@C/CZS catalyst with step-scheme (S-scheme) heterojunction. The photocatalytic hydrogen evolution reaction (HER) was conducted to verify the enhanced photoactivity of ZFO@C/CZS. The optimal ZFO@C/CZS exhibits an extraordinary photocatalytic HER rate of 111.3 ± 0.9 mmol g-1 h-1 under visible-light irradiation, corresponding to an apparent quantum efficiency as high as (76.2 ± 0.9)% at 450 nm. Additionally, the as-synthesized ZFO@C/CZS composite exhibits high stability and recyclability. The excellent photocatalytic hydrogen evolution performance should arise from the formed S-scheme heterojunction and the unique ZFO@C core-shell structure, which inhibit electron hole recombination as well as provide more reactive sites. The pathway of S-scheme charge transfer was validated through density functional theory calculations and electrochemical measurements. This work provides a rational strategy for the synthesis of unique magnetic S-scheme heterojunction photocatalysts for water splitting under visible light irradiation.

In-situ preparation of mossy tile-like ZnIn2S4/Cu2MoS4 S-scheme heterojunction for efficient photocatalytic H2 evolution under visible light.

The reasonable design and fabrication of heterojunction could regulate the photocatalytic performance to some extent, yet it is still a great challenge to construct the S-scheme heterostructure with the stable as well as tight interface on the surface of semiconductor photocatalysts. Herein, the ZnIn2S4/Cu2MoS4 (ZIS/CMS) S-scheme heterostructure was fabricated by in-situ assembling ZIS nanosheets on the CMS plates, obtaining a mossy tile-like morphology. Owing to the compact interface resulting from in-situ growth, this unique architecture efficiently facilitated the separation and transfer of light-induced charges, guaranteed the larger interface area, and enriched the active sites for photocatalytic redox reactions. After adjusting the mass ratio of CMS in ZIS/CMS, S-scheme heterostructure exhibited the remarkable performance with an optimal H2 producing rate up to 1298 µmol·h-1 g-1, about 13.8 times than that of pristine ZIS. The mechanism and driving force of charge transfer and separation in S-scheme heterostructure photocatalysts were explained and discussed. This investigation will provide new insight into design and construction of S-scheme heterojunction photocatalysts for H2 evolution.

A novel SnIn4S8/ZnFe2O4 S-scheme heterojunction with excellent magnetic properties and photocatalytic degradation activity for tetracycline.

The development of efficient and economical photocatalysts is considered a promising strategy for pollution remediation. Magnetically separable SnIn4S8/ZnFe2O4 composites (SIS/ZFO) were prepared by combining SIS with ZFO. The composite with a 30% ZFO mass ratio (SIS/ZFO-30) was the most effective and achieved 60% removal of tetracycline (TC) in 120 min. It has a rate constant of 7.94 × 10-3 min-1, which is 6.3 and 27.2 times higher than those of pure SIS and pure ZFO, respectively. The improved photocatalytic performance can be attributed to the formation of S-scheme heterojunctions between SIS and ZFO, which results in the strong absorption of visible light, the enhanced separation of electron-hole pairs, and the higher redox ability of photoinduced charges. Additionally, SIS/ZFO composites have excellent magnetic properties and high stability, and the recovered samples still retained good photocatalytic degradation performances after four cycles of experiments. Thus, the coupling of SIS with ZFO provides a valuable strategy for enhancing photocatalytic potential and offers a promising pathway for water remediation.

Highly efficient flower-like ZnIn2S4/CoFe2O4 photocatalyst with p-n type heterojunction for enhanced hydrogen evolution under visible light irradiation.

The construction of a p-n heterojunction structure is considered to be an effective method to improve the separation of electron-hole pairs in photocatalysts. A series of ZnIn2S4/CoFe2O4 (ZIS/CFO) photocatalysts with p-n heterojunctions were prepared via a method involving ultrasonication and calcination. The synthesized photocatalysts were tested and analyzed via various testing techniques, and their hydrogen evolution rates were evaluated. Compared with pure ZIS, ZIS/CFO with different mass ratios of CFO to ZIS showed improved photocatalytic hydrogen production performance, and the optimal photoactivity showed a nearly 12-fold increase, which can be attributed to the formation of p-n junctions and the formed internal electric field, accelerating the separation of electron-hole pairs and effectively improving the photocatalytic hydrogen evolution rate. The excellent stability of the ZIS/CFO composite was proven by three cycle experiments. In addition, the ZIS/CFO composite also possessed excellent magnetic properties to realize facial magnetic recoverability. This work paves the way for the design and preparation of magnetically recoverable p-n heterojunction photocatalysts.

The charge regulation of electronic structure and optical properties of graphitic carbon nitride under strain.

The electronic structure of the graphitic carbon nitride (g-C6N6) under strain was obtained using the hybrid density functional HSE06 with a larger computational workload. The g-C6N6 could withstand 12% of the applied tensile strain. The electronic structure of g-C6N6 could be changed effectively under the tensile force. The band gap changed from direct to indirect under the strain and could be tuned in the range of 3.16 eV to 3.75 eV. At approximately 4% of the applied strain, there was a transition of the valence band maximum (VBM). A wider range of light absorption could be obtained under the strain. Our results provide a prospect for the future applications of two-dimensional materials in electronic and optoelectronic devices.

Forming heterojunction: an effective strategy to enhance the photocatalytic efficiency of a new metal-free organic photocatalyst for water splitting.

Photocatalytic water splitting is a new technology for the conversion and utilization of solar energy and has a potential prospect. One important aspect of enhancing the photocatalytic efficiency is how to improve the electron-hole separation. Up to now, there is still no ideal strategy to improve the electron-hole separation. In this article, for metal-free organic photocatalysts, we propose a good strategy- forming heterojunction, which can effectively improve the electron-hole separation. We provide a metal-free organic photocatalyst g-C12N7H3 for water splitting. The stability of g-C12N7H3 has been investigated, the X-ray diffraction spectra has been simulated. Using first-principles calculations, we have systematically studied the electronic structure, band edge alignment, and optical properties for the g-C12N7H3. The results demonstrated that g-C12N7H3 is a new organocatalyst material for water splitting. In order to enhance the photocatalytic efficiency, we provided four strategies, i.e., multilayer stacking, raising N atoms, forming g-C9N10/g-C12N7H3 heterojunction, and forming graphene/g-C12N7H3 heterojunction. Our research is expected to stimulate experimentalists to further study novel 2D metal-free organic materials as visible light photocatalysts. Our strategies, especially forming heterojunction, will substantially help to enhance the photocatalytic efficiency of metal-free organic photocatalyst.