Oscillatory Active State of a Pd Nanocatalyst Identified by In Situ Capture of the Instantaneous Structure-Activity Change at the Atomic Scale.

Identifying the active phase with the highest activity, which is long-believed to be a steady state of the catalyst, is the basis of rational design of heterogeneous catalysis. In this work, we performed detailed in situ investigations, successfully capturing the instantaneous structure-activity change in oscillating Pd nanocatalysts during methane oxidation, which reveals an unprecedented oscillatory active state. Combining in situ quantitative environmental transmission electron microscopy and highly sensitive online mass spectrometry, we identified two distinct phases for the reaction: one where the Pd nanoparticles refill with oxygen, and the other, a period of abrupt pumping of oxygen and boosted methane oxidation within about 1 s. It is the rapid reduction process that shows the highest activity for total oxidation of methane, not a PdO or Pd steady state under the conditions applied here (methane:oxygen = 5:1). This observation challenges the traditional understanding of the active phase and requires a completely different strategy for catalyst optimization.

Size-Dependent Elemental Composition in Individual Magnetite Nanoparticles Generated from Coal-Fired Power Plant Regulating Their Pulmonary Cytotoxicity.

High-resolution characterization of magnetite nanoparticles (MNPs) derived from coal combustion activities is crucial to better understand their health-related risks. In this study, size distribution and elemental composition of individual MNPs from various coal fly ashes (CFAs) collected from a representative coal-fired power plant were analyzed using a single-particle inductively coupled plasma time-of-flight mass spectrometry technique. Majority (61-80%) of MNPs were identified as multimetal (mm)-MNPs, while the contribution of single metal (sm)-MNPs to the total increased throughout all the CFAs, reaching the highest in fly ash escaped through the stack (EFA). Among Fe-rich MNPs, Fe-sole and Fe-Al matrices were predominant, and Fe-sole MNPs were identified as the important carrier for toxic metals, with the highest mass contributions of toxic metals therein. Toxic potency results showed that the oxidative stress induced by MNPs was 1.2-2.2 times greater than those of <1 µm fractions in CFAs, while the reduction in cell viability showed no significant difference, elucidating that these MNPs can induce more distinct oxidative stress compared to cell toxicity. Based on structural equation model, MNP size can both directly and indirectly regulate the toxic potency, and the indirect regulation is through a size-dependent elemental composition of MNPs, including toxic metals. sm-MNPs and Fe-rich MNPs with Fe-sole, Fe-Cr, and Fe-Zn matrices can regulate the oxidative stress, whereas Cr, Zn, and Pb associated with Fe-sole, Fe-Al, Si-Fe, and Al-Fe MNPs showed significant effects on cell viability.

In Situ Resolving the Atomic Reconstruction of SnO2 (110) Surface.

Understanding surface reconstruction of nanocrystals is of great importance to their applications, however it is still challenging due to lack of atomic-level structural information under reconstruction conditions. Herein, through in situ spherical aberration corrected scanning transmission electron microscopy (STEM), the reconstruction of nanocrystalline SnO2 (110) surface was studied. By identifying the precise arrangements of surface/subsurface Sn and O columns through both in situ bright-field and high-angle annular dark-field STEM images, an unexpected added Sn2O model was determined for SnO2 (110)-(1 × 2) surface. The protruded Snδ+ of this surface could act as the active sites for activating O2 molecules according to our density functional theory (DFT) calculations. On the basis of in situ observation of atomic-level reconstruction behaviors and DFT calculations, an energy-driven reconstruction process was also revealed. We anticipate this work would help to clarify the long-standing debate regarding the reconstruction of SnO2 (110) surface and its intrinsic property.

Facet-Dependent Oxidative Strong Metal-Support Interactions of Palladium-TiO2 Determined by In Situ Transmission Electron Microscopy.

The strong metal-support interaction (SMSI) is widely used in supported metal catalysts and extensive studies have been performed to understand it. Although considerable progress has been achieved, the surface structure of the support, as an important influencing factor, is usually ignored. We report a facet-dependent SMSI of Pd-TiO2 in oxygen by using in situ atmospheric pressure TEM. Pd NPs supported on TiO2 (101) and (100) surfaces showed encapsulation. In contrast, no such cover layer was observed in Pd-TiO2 (001) catalyst under the same conditions. This facet-dependent SMSI, which originates from the variable surface structure of the support, was demonstrated in a probe reaction of methane combustion catalyzed by Pd-TiO2 . Our discovery of the oxidative facet-dependent SMSI gives direct evidence of the important role of the support surface structure in SMSI and provides a new way to tune the interaction between metal NPs and the support as well as catalytic activity.

A CeO2 (100) surface reconstruction unveiled by in situ STEM and particle swarm optimization techniques.

The reconstruction of the polar CeO2 (100) surface has been a subject of long-standing debates due to its complexity and the limited availability of experimental data. Herein, we successfully reveal a CeO2 (100)-(4 × 6) surface reconstruction by combining in situ spherical aberration-corrected scanning transmission electron microscopy, density functional theory calculations, and a particle swarm optimization-based algorithm for structure searching. We have further elucidated the stabilizing mechanism of the reconstructed structure, which involves the splitting of the filled Ce(4f) states and the mixing of the lower-lying ones with the O(2p) orbitals, as evidenced by the projected density of states. We also reveal that the surface chemisorption properties toward water molecules, an important step in numerous heterogeneous catalytic reactions, are enhanced. These insights into the distinct properties of ceria surface pave the way for performance improvements of ceria in a wide range of applications.

Surface Oxygen Vacancies Confined by Ferroelectric Polarization for Tunable CO Oxidation Kinetics.

Surface oxygen vacancies have been widely discussed to be crucial for tailoring the activity of various chemical reactions from CO, NO, to water oxidation by using oxide-supported catalysts. However, the real role and potential function of surface oxygen vacancies in the reaction remains unclear because of their very short lifetime. Here, it is reported that surface oxygen vacancies can be well confined electrostatically for a polarization screening near the perimeter interface between Pt {111} nanocrystals and the negative polar surface (001) of ferroelectric PbTiO3. Strikingly, such a catalyst demonstrates a tunable catalytic CO oxidation kinetics from 200 °C to near room temperature by increasing the O2 gas pressure, accompanied by the conversion curve from a hysteresis-free loop to one with hysteresis. The combination of reaction kinetics, electronic energy loss spectroscopy (EELS) analysis, and density functional theory (DFT) calculations, indicates that the oxygen vacancies stabilized by the negative polar surface are the active sites for O2 adsorption as a rate-determining step, and then dissociated O moves to the surface of the Pt nanocrystals for oxidizing adsorbed CO. The results open a new pathway for tunable catalytic activity of CO oxidation.