RESUMEN
We demonstrated an efficient way to enhance and flatten the emission cross sections of Er3+ ions at the L-band in the silicate fiber amplifier by increasing Mg2+ (up to 22.5â mol%) with high field strength. High values of Er3+ concentration, lifetime, and L-band emission cross section were achieved in our silicate fibers. Particularly, the flatness at the L-band was achieved to be 0.8â dB, and a high gain coefficient at 1625â nm (4.7â dB/m) was demonstrated by pumping meter-scale Er-silicate fibers. The as-prepared Er-silicate fibers are attractive for the L-band fiber amplifier.
RESUMEN
We designed a cascaded all-soft-glass fiber structure and simulate midinfrared 2-20 µm ultrawideband supercontinuum (SC) generation numerically. The cascaded fiber structure consists of a 1.5 m I n F 3 fiber, a 0.2 m chalcogenide photonic crystal fiber, and a 0.2 m tellurium-based chalcogenide photonic crystal fiber. Using a 2 µm pulse pumping this cascaded structure, the generated SC covering the wavelengths longer than 20 µm has been demonstrated theoretically. The 30 dB bandwidth reaches 20.87 µm from 1.44 to 22.31 µm. The effect of different pulse widths on SC generation is considered. With the increase of peak power and the decrease of pulse width, the energy of SC in the 15-20 µm waveband increases gradually. The mechanism of SC broadening process has also been analyzed. The SC generation of more than 20 µm in this cascade structure is caused by the self-phase modulation, soliton effects, four-wave mixing, and redshifted dispersive wave. This method demonstrates the possibility of generating ultrawide bandwidth SCs up to a 20 µm waveband by a commercial 2 µm pump source and all-fiber structure.
RESUMEN
The Brillouin gain spectrum (BGS) provides key information for stimulated Brillouin scattering (SBS), such as the Brillouin frequency shift (BFS), Brillouin spontaneous linewidth, and Brillouin gain coefficient. In this study, we theoretically investigate the field distributions and BGS characterization of Ge-doped, Al-doped, and Al/Ge co-doped fibers. Additionally, we analyzed and compared the relationship between the BGS and acoustic refractive index. In particular, we demonstrate the crucial role played by acoustic modes in anti-waveguide structures. The simulation results show that the Brillouin gain coefficient decreases with a decreasing acoustic index in the fiber core region. Furthermore, we experimentally measure the SBS threshold and BGS of the Al/Ge co-doped fiber to examine the validity of the numerical model. The simulated and experimental results are consistent.
RESUMEN
The entire decaying dynamics of harmonic mode-locking (HML) are studied utilizing the dispersive Fourier transform (DFT) technique in a SESAM-based mode-locked fiber laser. It is unveiled that the harmonic solitons do not disappear directly, but undergo transitional processes from the higher-order HML to the lower-order HML and then to the fundamental mode-locking (FML), and finally vanish. The "big corner" can also exist in the decaying process rather than just in the buildup process of HML, and there is at least one "big corner" during the decaying process between the consecutive multi-pulsing states. The energy stabilization phase (ESP) cannot be observed during every transitional process. A breathing behavior and a vibrating soliton molecule are observed in the decaying process from the 2nd HML to the FML and in the decaying process of the FML, respectively. Our work would enrich the understanding of HML behaviors and may contribute to the laser designs.
RESUMEN
We propose a Yb-doped fiber laser with an all-fiber beam shaper based on a single-mode-graded-index multimode-few-mode fiber (SMF-GIMF-FMF) structure. The excitation coefficients of the mode can be adjusted continuously by changing the GIMF length. Numerical simulations are performed to investigate the beam shaping dynamics in the fiber structure. Through adding the simple device geometry in the laser cavity, the switchable output between the fundamental transverse (LP01) mode and the second-order transverse (LP11) mode can be achieved. Cylindrical vector beams with high mode purity are also shown by removing the degeneracy of the LP11 mode.
RESUMEN
The spectral bandwidth of Er-doped fibers limits their lasing wavelength at longer wave band. Here, to the best of our knowledge, we report a broad emission band (1420â1680â nm) of Er3+ and demonstrate for the first time an Er-phosphate fiber, which supports laser oscillation at the extended wavelengths of 1627â nm and 1630â nm, with the output powers and slope efficiencies of 44â mW/12.5% and 16.5â mW/5.6%, respectively, pumped at 1480â nm. To the best of our knowledge, these are the highest output powers and slope efficiencies at 1627â nm and 1630â nm from an Er3+-doped all-fiber configuration.
RESUMEN
A fiber-based beam shaper to adjust the distribution of spatial modes in a few-mode fiber (FMF) is theoretically and experimentally investigated in this work. A compact and robust device, composed with a single mode fiber-graded index multimode fiber-few mode fiber (SMF-GIMF-FMF), is fabricated by simply fusion splicing of the fibers. Switchable spatial modes and multi-wavelength comb are obtained by the combination of the beam shaper and the few-mode fiber Bragg grating (FM-FBG). This combination acts as a filter to select the wavelength and spatial mode in the laser. A spatial mode switchable fiber laser with high mode purity is extended among LP01, LP11 and cylindrical vector beam (CVB) by adjusting the pressure applied on the beam shaper. Five-discrete wavelengths and their free combination wavelength comb are emitted with a slope efficiency higher than 10%. The fiber laser can be used in the spatial- and wavelength-division multiplexing (SWDM) fiber communication networks requiring particular structure light field.
RESUMEN
Saturable absorber (SA) based harmonic mode-locking (HML) techniques at 2 µm waveband are much less reported than those at 1.5 µm waveband, the maximum repetition rate of the harmonic pulse generated by such techniques at 2 µm waveband is also much lower than those generated at 1.5 µm waveband. In this paper, the 39th harmonic with the repetition rate of 908.6 MHz is realized in a Bi2S3-based thulium-doped fiber laser. The fundamental mode-locked pulse has a central wavelength of 1954.2 nm and a 3-dB bandwidth of 5.1 nm. The repetition rate is 23.27 MHz and the pulse width is 902 fs. The characteristics of the material and harmonic mode-locked pulse are investigated. To the best of our knowledge, this is the highest and the closest resonance frequency to GHz among the reported SA-based harmonic mode-locked fiber lasers operating at 2 µm waveband.
RESUMEN
The ultra-wideband supercontinuum generation (SCG) in a Te-based chalcogenide (ChG) photonic crystal fiber (PCF) is simulated in the mid-infrared (MIR) waveband. The PCF core and cladding materials are Ge20As20Se15Te45 and Ge20As20Se17Te43, respectively. The supercontinuum (SC) broadening affected by the core diameter and fiber absorption is considered. The selected PCFs at different pumping wavelengths can demonstrate the generation of ultra-wideband MIR supercontinuum according to the simulated results. We consider SC broadening with and without fiber absorption. A SC range from 3 to 25 µm is demonstrated by simulation in a PCF with a core diameter of 8 µm and a pump wavelength of 6 µm considering the fiber absorption. With the increase of the peak power and the pulse width and the decrease of the core diameter, the degree of coherence gradually degraded. To the best of our knowledge, this is the first demonstration of the possibility of SCG up to the waveband of 25 µm in fiber. Our results highlight the potential of a novel Te-based chalcogenide multi-material PCF for SCG. We also provide a way to generate the SCs to longer wavebands than 20 µm in fiber, especially up to the far-infrared waveband.
RESUMEN
In this work, we present femtosecond laser cutting of microchannels in a nodeless antiresonant hollow-core fiber (ARHCF). Due to its ability to guide light in an air core combined with exceptional light-guiding properties, an ARHCF with a relatively non-complex structure has a high application potential for laser-based gas detection. To improve the gas flow into the fiber core, a series of 250 × 30 µm microchannels were reproducibly fabricated in the outer cladding of the ARHCF directly above the gap between the cladding capillaries using a femtosecond laser. The execution time of a single lateral cut for optimal process parameters was 7 min. It has been experimentally shown that the implementation of 25 microchannels introduces low transmission losses of 0.17 dB (<0.01 dB per single microchannel). The flexibility of the process in terms of the length of the performed microchannel was experimentally demonstrated, which confirms the usefulness of the proposed method. Furthermore, the performed experiments have indicated that the maximum bending radius for the ARHCF, with the processed 100 µm long microchannel that did not introduce its breaking, is 15 cm.
RESUMEN
In this paper, the material loss of anti-resonant hollow-core fiber (AR-HCF) and its properties are studied. We revisit the formula of power attenuation coefficient for the index-guiding optical fiber described by Snyder and Love in the 1980s and derive the modal overlap factor that governs the material loss of hollow-core fibers (HCF). The modal overlap factor formula predicts the material loss of AR-HCF, which agrees with numerical simulations by the finite element method. The optimization of silica-based AR-HCF design for the lowest loss at 4 µm wavelength is numerically discussed where the silica absorption reaches over 800 dB/m. Our work would provide practical guidance to develop low-loss AR-HCF at highly absorptive wavelengths, e.g. in the vacuum UV and mid/far-infrared spectral regions.
RESUMEN
In this work, we present for the first time a laser-based dual gas sensor utilizing a silica-based Antiresonant Hollow-Core Fiber (ARHCF) operating in the Near- and Mid-Infrared spectral region. A 1-m-long fiber with an 84-µm diameter air-core was implemented as a low-volume absorption cell in a sensor configuration utilizing the simple and well-known Wavelength Modulation Spectroscopy (WMS) method. The fiber was filled with a mixture of methane (CH4) and carbon dioxide (CO2), and a simultaneous detection of both gases was demonstrated targeting their transitions at 3.334 µm and 1.574 µm, respectively. Due to excellent guidance properties of the fiber and low background noise, the proposed sensor reached a detection limit down to 24 parts-per-billion by volume for CH4 and 144 parts-per-million by volume for CO2. The obtained results confirm the suitability of ARHCF for efficient use in gas sensing applications for over a broad spectral range. Thanks to the demonstrated low loss, such fibers with lengths of over one meter can be used for increasing the laser-gas molecules interaction path, substituting bulk optics-based multipass cells, while delivering required flexibility, compactness, reliability and enhancement in the sensor's sensitivity.
RESUMEN
This Letter highlights a cost-effective, simple, and rapid one-step process leading to the (Sr0.84Lu0.16) F2.16 glass ceramic in a completely new perfluoride system. The mechanism was demonstrated clearly. This material shows high transparency in the UV (0.35 µm) range up to far-IR (10.8 µm). In addition, low phonon energy, as well as good mechanical properties, chemical durability, spectral performance, and long lifetime (7.2 ms) of Er3+:2.7 µm are also possessed by this material. This Letter effectively breaks through the performance limitation of a glass matrix on fluoride crystallites in glass ceramics for the first time, to the best of our knowledge. Meanwhile, it also provides a promising optical material for windows and lasers by a simple and cheap method.
RESUMEN
A visible supercontinuum (SC) with high energy is of vital importance to applications in remote sensing and hyperspectral light detection and ranging. A fiber laser with a wavelength of 1030 nm is frequency doubled through a LBO (LiB3O5) crystal, and a high-energy 515 nm laser is obtained after wavelength conversion. Two kinds of seven-core photonic crystal fibers (PCFs) are used in this Letter. One is a uniform seven-core PCF (USC-PCF), and the other is a tapered seven-core PCF (TSC-PCF). Pumped by a 515 nm laser with a pulse width in nanosecond level, an SC covering 400 to 900 nm is efficiently generated in both PCFs. A maximum energy of 4.24 µJ is obtained in a USC-PCF. To prevent fiber damage of the coupling fiber end, the TSC-PCF which contains a transition fiber and a meters-long small core fiber is fabricated. One end of the transition fiber possesses a larger core diameter, and the pump laser can be coupled into the TSC-PCF without fiber damage. The meters-long small core fiber has the same core size with a USC-PCF and is utilized as the nonlinear medium to generate an SC. The dispersive wave in the short wavelength band is excited when more energy is shed into a fiber anomalous dispersion region. Up to 15th-order Raman peaks are observed during the SC evolution process.
RESUMEN
We selected two thermally matched silicate glasses with fair refractive index contrast and developed an asterisk-shaped all-solid microstructured optical fiber. The fiber presents a low, ultra-flat, and all-normal dispersion in a wide wavelength range, allowing for the generation of an octave-spanning coherent supercontinuum (SC) in a 20 dB dynamic range with 0.5 ps pump pulses at 1.55 µm. This result improves pump pulse duration that is only â¼100 fs, related to the broadband and highly coherent SC generation in fibers with all-normal dispersion. This enables broadband SC sources with all-fiber, high-power, and highly coherent properties.
RESUMEN
We investigate supercontinuum generation (SCG) in AsSe2-As2S5 chalcogenide microstructured optical fibers (MOFs) pumped by different optical modes. The influence on SCG by different optical modes including the fundamental and high-order modes is analyzed numerically. The evolution of the supercontinuum (SC) is investigated by changing the pump wavelength (2120, 2580, and 3280 nm) and peak power (from 200 to 1000 W) of each optical mode (LP01,LP11,LP31) in the MOFs with different fiber lengths. SCG in MOFs with different core diameters is also simulated. The different optical modes cause the variation of the chromatic dispersion profile and the effective nonlinearity, which induces different mechanisms of the SCG and changes the spectral range. The maximum SC spectral range covers 12.931 µm from 1.389 to 14.320 µm when pumped by the LP11 mode with the peak power of 1000 W at 3280 nm. The simulated results will be instructive for the experimental SCG up to the midinfrared waveband longer than 10 µm.
RESUMEN
A numerical simulation of third-order cascaded Raman fiber laser based on tellurite fiber at the 2-5 µm waveband is presented. The Raman fiber laser can be optimized with the most suitable tellurite fiber length of 0.5-1.0 m and the most reasonable reflectivity of the third-order Stokes output FBG32 of 10%-20%. We demonstrate numerically that the third-order Stokes wave can reach the maximum average power of 45.2 W and the maximum optical conversion efficiency of 45.2%, corresponding to the FBG32 reflectivity of 10% and the tellurite fiber length of 0.3 m with the attenuation of 0.85 dB/m, when pumped by 2 µm light with the average power of 100 W. Our simulated results provide valuable theoretical guidance for the design and experiment of tellurite Raman fiber laser at a mid-infrared waveband.
RESUMEN
The effects of stimulated Raman scattering (SRS) is demonstrated in chalcogenide microstructured optical fiber (MOF) with all-solid AsSe2 core and As2S5 cladding. The first-order Raman Stokes wave is investigated in the MOFs with different core diameters pumped by the picosecond pulses at 1958 nm. The maximum conversion efficiency of -15.0 dB from the pump to first-order Raman Stokes wave is obtained in the MOF with the core diameter of 2.6 µm. The conversion efficiency decreases when the core diameter deviates from 2.6 µm. When the fiber core is larger, the effective nonlinearity is decreased. When the fiber core is smaller, the mode field is difficult to be confined in the core. The walk-off length between the pump and Stokes wave is crucial to the process of SRS according to the analysis of the experimental data. The Raman effects are simulated numerically. The simulated results can agree well with the experiments. It is the first time to demonstrate the Raman effect in AsSe2-As2S5 MOF, to the best of our knowledge.
RESUMEN
A mid-infrared supercontinuum (SC) light source, which has important applications in many fields, has been extensively investigated in soft glass fibers. However, the poor instinct properties of soft glass fibers and the development of ultrashort pulse lasers left an opportunity for mid-infrared SC generation in silica fiber. Until now, silica fiber has been the commonly used medium for SC generation due to its outstanding properties. In this paper, mid-infrared SC generation in short silica photonic crystal fibers (PCFs) is investigated theoretically and systematically. In the case of a 1550�nm pump, the soliton self-frequency shift effect is utilized to extend the long wavelength edge of SC. Adopting a fiber that has a zero dispersion wavelength away from the pump pulse is a benefit for the suppression of blue spectral component and energy distribution in the long wavelength band. In the case of a 1950�nm pump, the generation of a red-shifted dispersive wave is an efficient way to extend the long wavelength edge of SC. Additionally, the coherence for femtosecond pulse pumping is discussed in this paper. Finally, the long wavelength edge of SC is beyond 3000�nm when a 1950�nm femtosecond pump pulse propagates in a PCF with negative dispersive slope around the pump pulse.
RESUMEN
We investigate the supercontinuum (SC) generation in an 1 cm long silica photonic crystal fiber (PCF) pumped by the pulse sources with single, dual, and triple wavelengths, respectively. The silica PCF has two zero-dispersion wavelengths at 900 and 2620 nm, respectively. When pumped by a single wavelength, the SC spectral range covers about 1000 nm. When pumped by dual and triple wavelengths, the SC spectral range covers wider than 2000 nm. Both the SC spectral range and the flatness are improved obviously when pumped by triple wavelengths. The maximum SC spectral range is obtained when the silica PCF is pumped by the triple wavelengths at 800, 1450, and 1785 nm. The SC spectral range covers 2810 nm from 350 to 3160 nm wider than three octaves. The 10 dB bandwidth covers 2280 nm from 450 to 2730 nm wider than two octaves. This is the first investigation on comparison of the SCs generated by different pump wavelengths up to three experimentally. The generated SC spectra have covered the full transmission window of silica fiber.