Rapid quantification of the surface overflow and underground infiltration in sewer pipes based on computer vision and continuous optimization.

The overloading of the sewer network caused by unwarranted infiltration of stormwater may lead to waterlogging and environmental pollution. The accurate identification of infiltration and surface overflow is essential to predict and reduce these risks. To retrieve the limitations of infiltration estimation and the failure of surface overflow perception using the common stormwater management model (SWMM), a surface overflow and underground infiltration (SOUI) model is proposed to estimate the infiltration and overflow. First, the precipitation, water level of the manhole, surface water depth and images of the overflowing point, and volume at the outfall are collected. Then, the surface waterlogging area is identified based on computer vision to reconstruct the local digital elevation model (DEM) by spatial interpolation, and the relationship between the waterlogging depth, area and volume is established to identify the real-time overflow. Next, a continuous genetic algorithm optimization (CT-GA) model is proposed for the underground sewer system to determine the inflow rapidly. Finally, surface and underground flow estimations are combined to perceive the state of the urban sewer network accurately. The results show that, compared with the common SWMM simulation, the accuracy of the water level simulation is improved by 43.5% during the rainfall period, and the time cost of the computational optimization is reduced by 67.5%. The proposed method can effectively diagnose the operation state and overflow risk of the sewer networks in real time during rainfall seasons.

A two-stage water allocation strategy for developing regional economic-environment sustainability.

In this study, a new two-stage stochastic interval-parameter fuzzy programming strategy model is developed for regional economic-environment sustainability, considering the planning and management of water-resources and water-environment systems under uncertainty. The model is capable in addressing the complexity and uncertainties of the water system，which contains the concepts of economics and environment within an optimization framework. The objective of this research is to develop a participatory integrated assessment model, based on the water benefit and water environment security, with an application in the Sanjiang Plain area, China. The methodology intendeds to capture the complexity and scarcity of water management problems, incorporating the relevant sectors, as well as the different levels of water involved in water management decision. The model is applied through maximizing the benefits of water during livelihood, production and ecology. In addition, the model considers the constraints of water quantity and water quality. Then, a variety of decision results are calculated under different conditions of water shortage. The developed method is applied to plan resources management and develop regional environment sustainability. The generated results can assist the decision makers in not only making resources allocation strategies but also gaining insights into the benefit between economic and environment objective.

Biodegradation of lignin and nicotine with white rot fungi for the delignification and detoxification of tobacco stalk.

BACKGROUND: Tobacco stalk is one kind of abundant crop residues in China. The high lignification of tobacco stalk increases its reusing cost and the existing of nicotine will cause serious pollution. The biodegradation of lignocellulosic biomass has been demonstrated to be an environmental and economical approach for the utilization of plant stalk. Meanwhile, many nicotine-degrading microorganisms were found in nature. However, microorganisms which could degraded both nicotine and lignin haven't been reported. Therefore, it's imperative to find some suitable microorganisms to break down lignin and simultaneously remove nicotine in tobacco stalk. RESULTS: The nicotine in tobacco stalk could be degraded effectively by Trametes versicolor, Trametes hirsute and Phanerochaete chrysosporium. The nicotine content in tobacco stalk was lowered to below 500 mg/kg (a safe concentration to environment) after 10 days of fermentation with Phanerochaete chrysosporium and Trametes versicolor, and 15 days with Trametes hirsute. The degradation rate of lignin in the fermented tobacco stalk was 37.70, 51.56 and 53.75% with Trametes versicolor, Trametes hirsute and Phanerochaete chrysosporium, respectively. Meanwhile, 24.28% hemicellulose was degraded by Phanerochaete chrysosporium and 28.19% cellulose was removed by Trametes hirsute. Through the enzyme activity analysis, the main and highest ligninolytic enzymes produced by Phanerochaete chrysosporium, Trametes hirsute and Trametes versicolor were lignin peroxidase (88.62 U · L-1), manganese peroxidase (100.95 U · L-1) and laccase (745.65 U · L-1). Meanwhile, relatively high and stable cellulase activity was also detected during the fermentation with Phanerochaete chrysosporium, and the highest endoglucanase, exoglucanase and filter paper enzyme activities were 0.38 U · mL-1, 0.45 U · mL-1 and 0.35U · mL-1, respectively. Moreover, the products in the fermentation of tobacco stalk with P. chrysosporium were identified with GC-MS, besides the chemicals produced in the degradation of lignin and nicotine, some small molecular valuable chemicals and fatty acid were also detected. CONCLUSIONS: Our study developed a new method for the degradation and detoxification of tobacco stalk by fermentation with white rot fungi Phanerochaete chrysosporium and Trametes hirsute. The different oxidative enzymes and chemical products detected during the degradation indicated a possible pathway for the utilization of tobacco stalk.

Intraoperative intravenous versus periarticular injection of glucocorticoids in improving clinical outcomes after total knee arthroplasty: A prospective, randomized and controlled study.

BACKGROUND: Glucocorticoids have been widely used in perioperative period for postoperative pain relief after total knee arthroplasty (TKA). However, the optimal administration protocols of glucocorticoids remain controversial. This study aims to compare the efficacy of glucocorticoids between intravenous and periarticular injection on clinical outcomes. METHODS: A total of 114 patients were randomly assigned to intravenous (IV) group (n = 57) and periarticular injection (PI) group (n = 57). The IV group received 10 mg dexamethasone intravenously and the PI group received periarticular injection of 10 mg dexamethasone during the procedure. The clinical outcomes were assessed using visual analogue scale (VAS), knee society score (KSS), range of motion (ROM), knee swelling, inflammation markers and complications after TKA. RESULTS: The VAS score during walking at 2nd day postoperatively was lower in the PI group compared with the IV group (2.08 ± 1.45 vs 2.73 ± 1.69, p = .039), and there was no significant difference at the other time points of VAS score in two groups. The inflammation markers, knee swelling, knee ROM and KSS score were not statistically different. Vomiting and other complications occurrence were not significantly different between the two groups. CONCLUSIONS: Intraoperative periarticular injection of glucocorticoids has similar analgesic effect compared to intravenous in the postoperative period following TKA and may be even more effective on the second postoperative day. In addition, periarticular injection of glucocorticoids does not impose an excess risk or complication on patients.

A novel multi-strategy hydrological feature extraction (MHFE) method to improve urban waterlogging risk prediction, a case study of Fuzhou City in China.

Reliable hydrological data ensure the precision of the urban waterlogging simulation. To reduce the simulation error caused by insufficient basic data, a multi-strategy method (MHFE) for extracting hydrological features is proposed, which includes land use/land cover (LULC) extraction (LE) and digital elevation model (DEM) reconstruction (DR). First, the high-resolution remote image, satellite DEM, precipitation, flood points and depth, and planned LULC were collected. Second, the buildings, roads, and other areas of the satellite image were segmented using the U-Net model, and the LULC data with drainage features were extracted by combining the segmentation result with the planned LULC and drainage data. Then, the terrain features of the road were enhanced to construct high-precision DEM based on the fusion of multi-source data, such as elevation points, LULC, and satellite DEM. Finally, the waterlogging model was implemented under different return periods of rainfalls and typhoon rainfall to obtain the waterlogging distribution and water depth. The simulation results were compared with historical waterlogging event data and water depth observations. The results indicated that the proposed method significantly improved the accuracy of the simulation. In terms of identifying the waterlogging points, the average F1 score increased by 0.36, 0.20, and 0.07 compared to the raw model and the single LE and DR methods, respectively. In terms of water depth simulation, the average Nash-Sutcliffe efficiency (NSE) was increased from -0.24 to 0.86, with DR and LE contributing to 79.1 % and 20.9 %, respectively. The principal contribution and novelty of this paper is to explore the generic method that enhance the hydrological data, and the findings of this study improved the performance of urban waterlogging simulation.

[Three-dimensional morphological study of the effect of false acetabulum on the femoral structure in Crowe type â £ developmental dysplasia of the hip].

Objective: To explore the effect of false acetabulum on the development and anatomical morphology of proximal femur in Crowe type Ⅳ developmental dysplasia of the hip (DDH), providing a theoretical basis for the development of femoral reconstruction strategy and prosthesis selection for total hip arthroplasty. Methods: The medical records of 47 patients (54 hips) with Crowe type Ⅳ DDH between February 2008 and March 2020 were retrospectively analyzed, of which 21 patients (26 hips) were Crowe type Ⅳa (type Ⅳa group) and 26 patients (28 hips) were Crowe type Ⅳb (type Ⅳb group). There was no significant difference in general data such as gender, age, height, weight, body mass index, and side between the two groups ( P>0.05), which were comparable. The height of femoral head dislocation, the height of pelvis, and the proportion of dislocation were measured based on preoperative anteroposterior pelvic X-ray film. Based on the preoperative femoral CT scan data, the anatomical parameters of the femur and femoral medullary cavity were measured after three-dimensional reconstruction using Mimics19.0 software to calculate the canal fare index; and the femoral medullary cavity parameters were matched with the modular S-ROM prosthesis parameters. Results: The results of X-ray film measurement showed that the height of femoral head dislocation and the proportion of dislocation in type Ⅳa group were significantly higher than those in type Ⅳb group ( P<0.05). There was no significant difference in the height of pelvis between the two groups ( P>0.05). The results of CT three-dimensional reconstruction measurements showed that compared with the type Ⅳb group, the type Ⅳa group had less isthmus height, smaller femoral head, shorter femoral neck, narrower neck-shaft angle, increased anteversion angle, and higher greater trochanter, and the differences were significant ( P<0.05). There was no significant difference in the height of femoral head, femoral offset, and height difference between greater trochanter and femoral head between the two groups ( P>0.05). There was no significant difference in the mediolateral width (ML), anteroposterior width (AP), and diameter of the isthmus (Ci level) and the AP of the medullary cavity in the plane 40 mm distal to the most prominent point on the medial side of the lesser trochanter (C -40 level) ( P>0.05), and the size of medullary cavity was significantly smaller in type Ⅳa group than in type Ⅳb group at the other levels ( P<0.05). Compared with the type Ⅳb group, the difference between the outer diameter of the prosthetic sleeve and the diameter of the medullary cavity fitting circle in the plane where the center of femoral head rotation was located from the medial most prominent point of the lesser trochanter (C 0 level) in type Ⅳa group was smaller, and the proportion of negative values was greater ( P<0.05). The difference between the longest diameter of the prosthetic sleeve triangle and the ML of the medullary cavity in the plane 10 mm proximal to the most prominent point on the medial side of the lesser trochanter (C +10 level) in type Ⅳa group was smaller, and the proportion of negative values was greater ( P<0.05). Conclusion: False acetabulum has a significant impact on the morphology of the proximal femur and medullary cavity in patients with Crowe type Ⅳ DDH, and the application of three-dimensional reconstruction technique can accurately evaluate the femoral morphology and guide the selection of femoral prosthesis.

Multivariable Analysis of Risk Factors Affecting Dislocation After Bipolar Hemiarthroplasty in Patients with Femoral Neck Fracture.

OBJECTIVE: This study aimed to investigate the risk factors associated with dislocation and dissociation following bipolar hemiarthroplasty (HA) for the treatment of patients with femoral neck fractures. METHODS: We retrospectively reviewed 462 patients (479 hips) treated with bipolar HA from January 2010 to January 2020. All patients received posterolateral approaches and a minimum follow-up of at least 2 years regularly. A case-control study was performed to analyze the risk factors of dislocation regarding patient demographics, coexisting diseases, surgical and morphologic features. Multivariable logistic regression analysis for independent risk factors affecting dislocation and dissociation was also performed. RESULTS: The dislocation rate was 5.01%, and the mean time from HA to the first incident of dislocation was 38.75 days. Patient-related factors, including operation side, prosthesis type, and neuromuscular disease, did not differ significantly. Regarding the morphological factors, a significant difference was observed in center-edge (CE) angle, abduction angle, acetabular depth, depth/width ratio, rotation center (RC) to greater trochanter tip (GTT) vertical distance, RC to GTT vertical distance difference, RC to GTT horizontal distance, RC to GTT horizontal distance difference, offset difference, and offset discrepancy. Further, decreased CE angle, increased abduction angle, decreased RC to GTT vertical distance, decreased offset difference and increased offset discrepancy were determined to be independent risk factors of dislocation. The proportion of patients experiencing dissociation was 1.04%. All the implanted femoral heads were smaller than 43 mm, which was determined to be the risk factor of dissociation. CONCLUSION: Decreased CE angle, RC to GTT vertical distance, offset difference, and increased abduction angle, offset discrepancy were determined to be independent risk factors of HA dislocation. Once dislocation risk was detected by simulated templating, THA or changing surgical approach should be considered to avoid evitable perioperative complications.

An Assessment of Temporal and Spatial Dynamics of Regional Water Resources Security in the DPSIR Framework in Jiangxi Province, China.

Water resources are critical for the survival and prosperity of both natural and socioeconomic systems. A good and informational water resources evaluation system is substantial in monitoring and maintaining sustainable use of water. The Driver-Pressure-State-Impact-Response (DPSIR) framework is a widely used general framework that enabled the measurement of water resources security in five different environmental and socioeconomic subsystems: driver, pressure, state, impact, and response. Methodologically, outcomes of water resources evaluation based on such framework and using fuzzy set pair analysis method and confidence interval rating method depend critically on a confidence threshold parameter which was often subjectively chosen in previous studies. In this work, we demonstrated that the subjectivity in the choice of this critical parameter can lead to contradicting conclusions about water resources security, and we addressed this caveat of subjectivity by proposing a simple modification in which we sample a range of thresholds and pool them to make more objective evaluations. We applied our modified method and used DPSIR framework to evaluate the regional water resource security in Jiangxi Province, China. The spatial-temporal analysis of water resources security level was carried out in the study area, despite the improvement in Pressure, Impact, and Response factors, the Driver factor is found to become less safe over the years. Significant variation of water security across cities are found notably in Pressure and Response factors. Furthermore, we assessed both cross-sectionally and longitudinally the inter-correlations among the DPSIR nodes in the DPSIR framework. The region-specific associations among the DPSIR nodes showed important deviances from the general DPSIR framework, and our analysis showed that in our study region, although Responses of regional government work effectively in improving Pressure and State security, more attention should be paid to improving Driver security in future regional water resources planning and management in Jiangxi Province, China.

Three-dimensional morphological study of the proximal femur in Crowe type IV developmental dysplasia of the hip.

BACKGROUND: When performing femoral reconstruction in patients with Crowe type IV developmental dysplasia of the hip (DDH), anatomical deformity presents many technical challenges to orthopedic surgeons. The false acetabulum is suggested to influence load transmission and femoral development. The aim of this study was to describe the morphological features of dysplastic femurs in Crowe type IV DDH and further evaluate the potential effect of the false acetabulum on morphological features and medullary canal of Crowe type IV femurs. METHODS: We analyzed preoperative computed tomography scans from 45 patients with 51 hips (25 hips without false acetabulum in the IVa group and 26 hips with false acetabulum in the IVb group) who were diagnosed with Crowe type IV DDH and 30 normal hips in our hospital between January 2009 and January 2019. Three-dimensional reconstruction was performed using Mimics software, and the coronal femoral plane was determined to evaluate the following parameters: dislocation height, dislocation ratio, height of the femoral head (FH), height of the greater trochanter (GT), GT-FH height discrepancy, height of the isthmus, neck-shaft angle, femoral offset and anteversion of the femoral neck. The mediolateral (ML) width, anterolateral (AP) width and diameter of medullary canal of the proximal femur were measured on the axial sections. Further, canal flare index (CFI), metaphyseal-CFI and diaphyseal-CFI were also calculated. RESULTS: Compared with the normal femurs, the Crowe type IV DDH femurs had a higher femoral head, larger GT-FH height discrepancy, larger femoral neck anteversion, higher isthmus position and smaller femoral offset. Dislocation height and dislocation rate were significantly larger in the IVa DDH group (65.34 ± 9.83 mm vs. 52.24 ± 11.42 mm). Further, the IVb femurs had a significantly lower isthmus position, larger neck-shaft angle and smaller femoral neck anteversion than IVa femurs. The ML, AP canal widths and the diameter of medullary canal in both DDH groups were significantly smaller than the normal group. Dimensional parameters of IVa femurs were also narrower than IVb femurs in most sections, but with no difference at the level of isthmus. According to the CFIs, the variation of proximal medullary canal in IVb femurs was mainly located in the diaphyseal region, while that in IVa femurs was located in the whole proximal femur. CONCLUSIONS: High dislocated femurs are associated with more anteverted femoral neck, smaller femoral offset and narrower medullary canal. Without stimulation of the false acetabulum, IVa DDH femurs were associated with higher dislocation and notably narrower medullary canal, whose variation of medullary canal was located in the whole proximal femur.

Combining autologous bone marrow buffy coat and angioconductive bioceramic rod grafting with advanced core decompression improves short-term outcomes in early avascular necrosis of the femoral head: a prospective, randomized, comparative study.

BACKGROUND: Treatment of avascular necrosis of the femoral head (ANFH) in young patients remains a clinical challenge. A current controversy is whether hip-preserving surgery results in better outcomes. The adverse effects of hip-preserving surgery are associated with the fill material for the necrotic areas. This study aims to evaluate the early effects of autologous bone marrow buffy coat (BBC) and angioconductive bioceramic rod (ABR) grafting with advanced core decompression (ACD) on early ANFH. METHODS: Forty-four (57 hips) patients with early ANFH from 2015 to 2020 were recruited for this study. They were randomized into two groups: group A received ACD, BBC, and ABR grafting; group B received treatment of ACD with ß-tricalcium phosphate (ß-TCP) granules and ABR grafting. The outcomes were assessed using the Harris Hip Scores (HHS) and survival rate analysis. The follow-up endpoint was defined as conversion to total hip arthroplasty (THA). RESULTS: Forty patients (51 hips) were ultimately included in this study for analysis. Compared with group B, patients in group A had higher postoperative function score (P = 0.032) and postoperative Harris Hip Scores (HHS) (P = 0.041). Kaplan-Meier analysis showed a trend that the survivorship of the femoral head was higher in group A than in group B. CONCLUSION: The short-term follow-up results showed that the autologous bone marrow buffy coat and angioconductive bioceramic rod grafting with advanced core decompression is effective in the treatment of early ANFH. TRIAL REGISTRATION: Chictr.org.cn , ChiCTR2000039595. Retrospectively registered on 11 February 2015.

Temporal and spatial variations in water discharge and sediment load on the Loess Plateau, China: A high-density study.

Over the past 50 years, a series of soil and water conservation measures have been implemented on the Loess Plateau, including biological, engineering, and agricultural measures. As a result, water discharge and sediment load on the plateau have undergone significant changes. In this study, we compared the water discharge and sediment load at >100 hydrological stations across the Loess Plateau during the period 2008-2016 (P2) with the water discharge and sediment load during the period 1971-1987 (P1), and detected the main sources of sediment in each of the two periods. We then performed an attribution analysis to quantify the influence of different factors on the changes in sediment load. We found the following results: (1) Water discharge was reduced by 22% in P2 compared with P1, whereas the sediment load was reduced by 74%. (2) Sediment resources are mainly concentrated between Toudaoguai and Tongguan stations: this region contributed >88% of the total sediment load at the terminal station (Huayuankou station) in both P1 and P2. (3) When considering only the changes in sediment concentration on the Loess Plateau, we conclude that the contribution of human activities was >72%. This study provides a detailed description of the temporal and spatial variations in water and sediment across the Loess Plateau, providing a reliable reference for the future development of ecological soil and water conservation measures on the Loess Plateau.

Identification of a novel regeneration-related gene H3 and its protein from the differential expression cDNA library of spinal cord injury in neonatal rats.

OBJECTIVE: To clone and identify one novel regeneration related gene H(3) (CA854305) from the differential expression genes library we had set up before. METHODS: Use the method of Northern blot to detect the different expressions of the novel gene under different situations, employ the technique of in silico cloning to scan the span of the novel gene, and analyze their sequences. Also we used reverse transcription PCR to validate the largest open reading frame. RESULTS: Northern blotting results of H(3) (CA854305) showed that the transplanted group had more efficient and extensive expression than untreated and uninjured groups 5 days after spinal cord injury, while the untreated group had more extensive expression than uninjured group. It implied that H(3) might have some relationship with nerve regeneration after spinal cord injury. From the results of in silico cloning we got a longest contig of 1635 bp and an largest open reading frame of 542 bp from 49 to 591 bp correspondent with the Cozak rules. Reverse transcription PCR validated the largest open reading frame sequence primarily. CONCLUSIONS: We got the sequence of novel gene H(3) which might be one of the regenerationjrelated genes. Key words:Gene library; Genes; Nerve regeneration; Spinal cord injuries.

Endogenous neural stem cells in central canal of adult rats acquired limited ability to differentiate into neurons following mild spinal cord injury.

Endogenous neural stem cells in central canal of adult mammalian spinal cord exhibit stem cell properties following injury. In the present study, the endogenous neural stem cells were labeled with Dil to track the differentiation of cells after mild spinal cord injury (SCI). Compared with 1 and 14 days post mild injury, the number of endogenous neural stem cells significantly increased at the injured site of spinal cord on 3 and 7 days post-injury. Dil-labeled ßIII-tublin and GFAP expressing cells could be detected on 7 days post-injury, which indicated that the endogenous neural stem cells in central canal of spinal cord differentiated into different type of neural cells, but there were more differentiated astrocytes than the neurons after injury. Furthermore, after injury the expression of inhibitory Notch1 and Hes1 mRNA began to increase at 6 hours and was evident at 12 and 24 hours, which maintained high levels up to 7 days post-injury. These results indicated that a mild SCI in rat is sufficient to induce endogenous neural stem cells proliferation and differentiation. However, the ability to differentiate into neurons is limited, which may be, at least in part, due to high expression of inhibitory Notch1 and Hes1 genes after injury.

Protective effects of adenoviral cardiotrophin-1 gene transfer on rubrospinal neurons after spinal cord injury in adult rats.

Cardiotrophin-1 (CT-1), a muscle-derived cytokine, supports the survival of motoneurons in vivo and in vitro. The present study investigated whether adenoviral huCT-1 gene transfer protected injured neurons from cell death or atrophy and promoted regeneration of rubrospinal tract (RST) after spinal cord injury in adult rats. Administration of the adenoviral CT-1 vector (Adv-CT1) to C3-4 lateral funiculus hemisection cavity, that completely interrupted RST, led to sustained CT-1 expression. Providing Adv-CT1, which rescued 20% of neurons, could prevent the loss of injured rubrospinal neurons 8 weeks post-injury. Retrograde tracing with FluoroGold showed that 1.2% of RST neurons regenerated at least two segments caudal to the injury site. Anterograde tracing with biotinylated dextran amine revealed that the RST axons terminated in white matter and gray matter. Behavioral testing revealed a significant functional recovery in limb usage. This observation indicated that adenoviral CT-1 gene transfer into the injured cord promoted survival and regeneration of rubrospinal neurons in adult rats.

Functional recovery of the spinal cord following ischemia and reperfusion injury.

OBJECTIVE: To study the changes of excitatory amino acids (EAAs) and intracellular calcium ([Ca2+]i), and the protective effect of EAAs receptor antagonists in the tissues of rabbit lumbar spinal cord after 40-minues ischemia and 4-hours reperfusion. METHODS: Thirty healthy rabbits were divided into six groups: sham-operation, 40-minues ischemia, 4-hour reperfusion, ketamine and MgSO4 treatment, ketamine treatment, and saline treatment groups. The contents of EAAs (glutamate and aspartate) and [Ca2+]i were measured. RESULTS: The contents of glutamate and aspartate were decreased to 15.18 micromol/g+/-2.33 micromol/g and 9.99 micromol/g+/-0.69 micromol/g, respectively; 13.75 micromol/g+/-2.58 micromol/g and 6.49 micromol/g+/-1.39 micromol/g after reperfusion. In the ischemia group, the [Ca2+]i was elevated to 221.2 microg/g+/-4.27 microg/g, and elevated further to 298.3 microg/g+/-9.26 microg/g after reperfusion, being significantly higher than that of ischemia and control groups. Ketamine could obviously increase the level of glutamate and aspartate and decrease the level of [Ca2+]i during the ischemia and reperfusion injury. CONCLUSIONS: The excitotoxicity of EAAs and the overload of calcium induced by EAAs play a harmful role in ischemia and reperfusion injury. Ketamine has an effective inhibitory effect.

Preparation and degradation characteristic study of bone repair composite of DL-polylactic acid/hydroxyapatite/decalcifying bone matrix.

OBJECTIVE: To explore the preparative method and study the degradation characteristics of bone repair composite of DL-polylactic acid (PDLLA)/hydroxyapatite(HA)/decalcifying bone matrix (DBM) in vitro. METHODS: An emulsion blend method was developed to prepare the composite of PDLLA/HA/DBM in weight ratio of PDLLA:HA:DBM = 1.5-2:1-1.5:1. The dynamic changes of weight, biomechanical property and pH value of PDLLA/HA/DBM and PDLLA in phosphate buffered saline (PBS, pH 7.4) were studied respectively through degradation tests in vitro. RESULTS: Without being heated, PDLLA, HA and DBM could be synthesized with the emulsion blend method as bone composite of PDLLA/HA/DBM, which had both osteoconductive and osteoinductive effects. The diameter of the aperture was 100-400 microm and the gap rate was 71.3%. During degradation, the pH value of PDLLA solution decreased lightly within 2 weeks, but decreased obviously at the end of 4 weeks and the value was 4.0. While the pH value of PDLLA/HA/DBM kept quite steady and was 6.4 at the end of 12 weeks. The weight of PDLLA changed little within 4 weeks, then changed obviously and was 50% of its initial weight at the end of 12 weeks. While the weight of PDLLA/HA/DBM changed little within 5 weeks, then changed obviously and was 60% of the initial weight at the end of 12 weeks. The initial biomechanical strength of PDLLA was 1.33 MPa, decreased little within 3 weeks, then changed obviously and kept at 0.11 MPa at the end of 12 weeks. The initial biomechanical strength of PDLLA/HA/DBM was 1.7 MPa, decreased little within 4 weeks, then changed obviously and kept at 0.21 MPa at the end of 12 weeks. CONCLUSIONS: The emulsion blend method is a new method to prepare bone repair materials. As a new bone repair material, PDLLA/HA/DBM is more suitable for regeneration and cell implantation, and the environment during its degradation is advantageous to the growth of bone cells.

Experimental study on the apoptosis of the astrocytes and the oligodendrocytes induced by Ca(2+) reperfusion.

OBJECTIVE: To investigate the apoptosis rules of the astrocytes and oligodendrocytes induced by Ca(2+) reperfusion. METHODS: The apoptosis of purified cultured astrocytes and oligodendrocytes induced by Ca(2+) reperfusion and the relationship between the development of the cell apoptosis and post-reperfusion time was observed. RESULTS: Both the astrocytes and oligodendrocytes were obviously in a time-dependent fashion, and the apoptosis ratios of the oligodendrocytes (39.73%+/-4.16%) were higher than the astrocytes (19.64%+/-4.67%) 24 hours after Ca(2+) reperfusion. The TUNEL positive cells were 13.6+/-1.82 and 21.4+/-1.95 at every visual field of astrocytes and oligodendrocytes respectively 24 hours after Ca(2+) reperfusion. CONCLUSIONS: The astrocytes and oligodendrocytes are similar wi th the development rules on apoptosis and have different susceptiveness to the situation.

[Preparation and degradation characteristics of bone repair composite--PDLLA/HA/DBM].

OBJECTIVE: To explore a new method of preparing the composite of DL-polylactic acid (PDLLA), hydroxyapatite(HA), decalcium bone matrix (DBM), and to observe the degradation characteristics of PDLLA/HA/DBM in vitro. METHODS: An emulsion blend method was developed to prepare the composite of PDLLA/HA/DBM based on the weight rate of PDLLA:HA:DBM = 1.5-2:1-1.5:1. The characteristics of the particles was observed by scanning electron microscope. In vitro, PDLLA/HA/DBM and PDLLA were put into PBS(pH7.4) respectively; the pH value, weight and biomechanics of them were determined during the degradation. RESULTS: Without heating, the emulsion blend method could be developed to prepare PDLLA/HA/DBM. Scanning electron microscope showed that the gap diameter in the compound material was 100 to 400 microns, and the porosity was 71.3%; During degradation, the pH value of PDLLA decreased little within 2 weeks, then decreased obviously and decreased to 4.0 at the end of the 4th week; while the pH value of PDLLA/HA/DBM kept quite steady and was 6.4 at the end of the 12th week. The weight of PDLLA decreased little within 4 weeks, then decreased obviously and remained 50% of its prime weight at the end of the 12th week; while the weight of PDLLA/HA/DBM decreased little within 5 weeks, then decreased obviously and remained 60% of the prime at the end of the 12th week. The prime biomechanical strength was 1.33 MPa in PDLLA and 1.71 MPa in PDLLA/HA/DBM. There was significant difference between them (P < 0.05). The strength of PDLLA decreased little within 3 weeks, then decrease obviously and was 0.11 MPa at the end of the 12th week; the strength of PDLLA/HA/DBM decreased little within 4 weeks, then decrease obviously and was 0.21 MPa at the end of the 12th week. CONCLUSION: The emulsion blend method is a new method to prepare bone repair materials. As a new bone repair material, PDLLA/HA/DBM is suitable for bone tissue engineering for its good characteristics of porosity and degeneration.