Enhanced Cycling and Structure Stability of an Electron Transfer-Accelerating Polymer Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate)-Covered Mn-Based Layered Cathode with Ga3+ Doping for a Li-Ion Battery.

Mn-based cathode material Li1.20Mn0.52Ni0.20Co0.08O2 was proposed and ameliorated by surface-coating poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and doping Ga3+. X-ray diffraction and high-resolution transmission electron microscopy studies revealed that part of Ga3+ replacing the Ni site could reduce the Li+/Ni2+ mixing by forming a well-ordered layered structure and a homogeneous coating layer of PEDOT:PSS is covered on the surface of Li1.20Mn0.52Ni0.19Co0.08Ga0.01O2. The results of the electrochemical studies demonstrated the higher initial charging-discharging Coulombic efficiency, and outstanding rate capabilities and cyclic performance were obtained for the PEDOT:PSS-covered and Ga3+-doped samples. Especially, 2 wt % PEDOT:PSS-coated Li1.20Mn0.52Ni0.19Co0.08Ga0.01O2 delivered 38.3 mAh g-1, which is larger than the pristine cathode at a 5C high rate. Meanwhile, it could retain 189.6 mAh g-1 (90.3% of its initial discharge capacity at 45 °C) after 300 cycles with a 1C rate, while the pristine cathode only delivered 149.7 mAh g-1 with 80.7% cycling retention left. The results strongly suggested that such PEDOT:PSS-coated and Ga3+-doped Mn-based layered structure materials demonstrated high potential as a cathode candidate especially for high-energy applications.

Corrosion resistance and mechanisms of Nd(NO3)3 and polyvinyl alcohol organic-inorganic hybrid material incorporated MAO coatings on AZ31 Mg alloy.

This work reports the design and preparation of novel organic (polyvinyl alcohol, PVA)-inorganic (neodymium nitrate, Nd(NO3)3) hybrid coatings on micro-arc oxidation (MAO) coating for magnesium (Mg) alloy corrosion protection. X-ray diffractometer, X-ray photoelectron spectroscopy, fourier transform infrared spectroscopy, field emission scanning electron microscope, Energy Dispersive X-ray spectrometer and surface roughness were applied to characterize the chemical composition and surface morphology of the coatings. The corrosion resistance of the coatings was evaluated by electrochemical and salt spray tests. The results suggested that the formation of PVA-Nd3+ and PVA-Mg2+ complexes promoted the enrichment of Nd3+ on the surface, and thereby improved the sealing quality and compactness of the coating. Interestingly, when the coating was damaged, the Nd3+ ions were transformed to their carbonates and covered the active sites, and thus exhibiting self-healing function. Further, the corrosion resistance of PVA-Nd3+ modified MAO composite coating on AZ31 Mg alloy was improved.

In vitro corrosion resistance and dual antibacterial ability of curcumin loaded composite coatings on AZ31 alloy: Effect of amorphous calcium carbonate.

Rapid corrosion and bacterial infection are obstacles to put into use biodegradable magnesium (Mg) alloy as biomedical materials. In this research, an amorphous calcium carbonate (ACC)@curcumin (Cur) loaded poly-methyltrimethoxysilane (PMTMS) coating prepared by self-assembly method on micro-arc oxidation (MAO) coated Mg alloy has been proposed. Scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy are adopted to analyze the morphology and composition of the obtained coatings. The corrosion behaviour of the coatings is estimated by hydrogen evolution and electrochemical tests. The spread plate method without or with 808 nm near-infrared irradiation is applied to evaluate the antimicrobial and photothermal antimicrobial ability of the coatings. Cytotoxicity of the samples is tested by 3-(4,5)-dimethylthiahiazo(-z-y1)-2,5-di- phenytetrazoliumromide (MTT) and live/dead assay culturing with MC3T3-E1 cells. Results show that the MAO/ACC@Cur-PMTMS coating exhibited favourable corrosion resistance, dual antibacterial ability, and good biocompatibility. Cur was employed as an antibacterial agent and photosensitizer for photothermal therapy. The core of ACC significantly improved the loading of Cur and the deposition of hydroxyapatite corrosion products during degradation, which greatly promoted the long-term corrosion resistance and antibacterial activity of Mg alloys as biomedical materials.

Corrosion self-warning and repair tracking of polymeric coatings based on stimulus responsive nanosensors.

Smart polymeric coatings with early corrosion self-warning and damage self-repairing characteristics have garnered tremendous interest due to their ability to sense corrosion reactions and repair coating defects. However, tracking the repair process and its underlying protection mechanism is highly challenging. Herein, we report the construction of a novel composite coating by incorporating multifunctional nanosensors (graphene oxide-zeolitic imidazole frameworks loaded with 1,10-phenanthroline) into a thermo-responsive polyurethane. Under damaging events, the localized acidity derived from metal corrosion stimulates the decomposition of the nanosensors to produce 1,10-phenanthroline and benzimidazole. The generated ferrous ions are rapidly sensed by the released 1,10-phenanthroline to produce a conspicuous red color, which warns of the corrosion occurrence. In profiting from the photothermal effect of graphene oxide, the composite coating exhibits efficient crack closure behavior under near-infrared light irradiation. Morphology observation indicates that a coating scratch (about 30 µm wide) almost closed with 20 s of irradiation. The photothermally activated crack closure combined with benzimidazole inhibition endows the prepared coating with superior self-repairing performance. Interestingly, the change in color intensity around the coating defect can assist in tracking the repair process. Therefore, this work provides a novel strategy to visualize microscopic behaviors during damage and repair processes.

Anti-corrosion and self-healing coatings with polyaniline/epoxy copolymer-urea-formaldehyde microcapsules for rusty steel sheets.

Polyaniline (PANI)/Epoxy copolymer as a core material was synthesized via a chemical oxidation method. Various analytical techniques, including scanning electron microscope, Fourier transform infrared spectroscopy, energy dispersive spectroscopy, thermogravimetry, and electrochemical impedance spectroscopy, were used to characterize the morphology, compositions, and self-healing and anticorrosion properties of the prepared microcapsules and coatings. The prepared PANI/Epoxy copolymer showed the best electrochemical corrosion resistance when the ratio of PANI to epoxy was 0.05: 1 (wt.:wt.). For the mass fraction of the core (PANI/Epoxy copolymer) of 60.84 ± 0.06 wt%, the mean particle diameter of the prepared microcapsules was 4.20 ± 0.92 µm. The coatings with 15 wt% microcapsules possessed excellent self-healing performance and corrosion resistance. The low-frequency impedance modulus at 0.01 Hz of scratched coatings immersed in the NaCl solution for 24 h was 5.27 × 106 Ω·cm2. Scratched self-repairing coating samples were able to resist corrosion for 384 h; thus, the microcapsules can be used to significantly extend the service life of the coatings. Microcapsule-containing PANI/Epoxy copolymers are expected to find use in anticorrosion coating systems, where the coatings could be applied directly on rusty steel surfaces.

In vitro degradation, photo-dynamic and thermal antibacterial activities of Cu-bearing chlorophyllin-induced Ca-P coating on magnesium alloy AZ31.

Surgical failures, caused by postoperative infections of bone implants, are commonly met, which cannot be treated precisely with intravenous antibiotics. Photothermal therapy (PTT) and photodynamic therapy (PDT) have attracted widespread attention due to their non-invasive antibacterial effects on tissues and no bacterial resistance, which may be an excellent approach to solve infections related to bone implants for biodegradable magnesium alloys. Herein, a sodium copper chlorophyllin (SCC) with a porphyrin ring induced Ca-P coating was prepared on AZ31 magnesium alloy via layer-by-layer (LbL) assembly. The morphology and composition of the samples were characterized through field emission scanning electron microscope (FE-SEM) with affiliated energy dispersive spectrometer (EDS), X-ray diffractometer (XRD), and Fourier infrared spectrometer (FTIR) and X-ray photoelectron spectrometer (XPS) as well. Potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and hydrogen evolution experiments were employed to evaluate the corrosion behavior of the samples. Atomic absorption spectrophotometer was used to measure Cu elemental content of different immersion periods. Cytocompatibility and antibacterial performance of the coatings were probed using in vitro cytotoxicity tests (MTT assay), live/dead cell staining and plate counting method. The results showed that the obtained (Ca-P/SCC)10 coating exhibited good corrosion resistance, antimicrobial activity (especially under 808 nm irradiation) and biocompatibility. The antibacterial rates for E. coli and S. aureus were 99.9% and 99.8%, respectively; and the photothermal conversion efficiency was as high as 42.1%. Triple antibacterial mechanisms including photodynamic, photothermal reactions and copper-ions release were proposed. This coating exhibited a promising application for biodegradable magnesium alloys.

Graphene sheet-starch platform based on the groove recognition for the sensitive and highly selective determination of iodide in seafood samples.

The functionalization of graphene nanosheets was realized using a simple starch mixture to achieve a highly selective recognition of iodide, thereby surmounting the complicated reactions possibly leading to low yield during functionalization. The groove recognition for starch to iodide, a novel recognition model, was established. The starch-to-graphene nanosheet mass ratio of 3:2 produced an optimal current signal. The recognition and measurement procedures were conducted in different cells, respectively. These procedures improved the selectivity and sensitivity, and overcame the possibility of interference from coexisting ions. Under optimal conditions, the graphene sheet-starch electrode was immersed in a recognition cell at pH 2.0 for 10min, afterward, in a measurement cell at pH 1.0 for quantitative analysis, resulting in the highest current signals obtained. The quantitative electrochemical measurements yielded a mean value of 214.6mg/kg in actual samples of commercially available seafood sample, whereas the spectrophotometric measurements produced a mean value of 226.7mg/kg. If the spectrophotometric value for the seafood sample is accurate, the percentage error for the electrochemical method is only 5.3%. Therefore, the electrochemical method is reliable for qualitative iodide measurements. The groove recognition was highlighted to elucidate the specific selectivity.