Dumbbell-Shaped Bi-component Mesoporous Janus Solid Nanoparticles for Biphasic Interface Catalysis.

There is a strong desire to design and synthesize catalysts that assemble at the oil-water interface to improve the efficiency of biphasic reactions. Anisotropic dumbbell-shaped bi-component mesoporous carbon-organosilica Janus particles with asymmetric wettability are synthesized through a one-step compartmentalized growth of a mesoporous organosilica sphere attached to a mesoporous resorcinol-formaldehyde (RF) sphere. A library was prepared of tunable Janus particles possessing diverse hollow structures with various functionalities. As a proof of concept, the Janus particle-derived catalyst can assemble at the oil-water interface to stabilize Pickering emulsions. Owing to the increased reaction interface area, the Janus catalyst exhibits a more than three-fold increase in catalytic efficiency compared to the Pt loaded carbon sphere catalyst in aqueous hydrogenation reactions.

The effect of silencing arginine kinase by RNAi on the larval development of Helicoverpa armigera.

Arginine kinase (AK) is an important regulation factor of energy metabolism in invertebrate. An arginine kinase gene, named HaAK, was identified to be differentially expressed between Cry1Ac-susceptible (96S) and Cry1Ac-resistant (Bt-R) Helicoverpa armigera larvae using cDNA-amplification fragment length polymorphism analysis. The full-length open reading frame sequence of HaAK gene with 1068 bp was isolated from H. armigera. Quantitative reverse transcription polymerase chain reaction assay revealed that HaAK gene is specifically expressed in multiple tissues and at larval developmental stages. The peak expression level of HaAK was detected in the midgut of the fifth-instar larvae. Moreover, the expression of HaAK was obviously down-regulated in Bt-R larvae. We further constructed a dsRNA vector directly targeting HaAK and employed RNAi technology to control the larvae. The feeding bioassays showed that minute quantities of dsRNA could greatly increase the larval mortality and delay the larval pupation. Silencing of HaAK significantly retarded the larval development, indicating that HaAK is a potential target for RNA interference-based pest management.

Reactant enrichment in hollow void of Pt NPs@MnOx nanoreactors for boosting hydrogenation performance.

In confined mesoscopic spaces, the unraveling of a catalytic mechanism with complex mass transfer and adsorption processes such as reactant enrichment is a great challenge. In this study, a hollow nanoarchitecture of MnOx-encapsulated Pt nanoparticles was designed as a nanoreactor to investigate the reactant enrichment in a mesoscopic hollow void. By employing advanced characterization techniques, we found that the reactant-enrichment behavior is derived from directional diffusion of the reactant driven through the local concentration gradient and this increased the amount of reactant. Combining experimental results with density functional theory calculations, the superior cinnamyl alcohol (COL) selectivity originates from the selective adsorption of cinnamaldehyde (CAL) and the rapid formation and desorption of COL in the MnOx shell. The superb performance of 95% CAL conversion and 95% COL selectivity is obtained at only 0.5 MPa H2 and 40 min. Our findings showcase that a rationally designed nanoreactor could boost catalytic performance in chemoselective hydrogenation, which can be of great aid and potential in various application scenarios.

Dipolar molecules as impellers achieving electric-field-stimulated release.

Here we report the design of a new external electric field-controlled release system using functional dipolar molecules as nanoimpellers. The dipolar molecule 4-(3-cyanophenyl)butylene, which can reorient in response to external electric fields with different frequencies because of its strong inherent dipole moment, was synthesized and grafted onto the inner surfaces of mesopores. Under an alternating electric field, the swinging flexible molecular chains consequently push guest molecules out of the pore voids. This innovative approach to controlled release may provide important application opportunities in tumor treatment with a number of advantages in terms of local release with targetability, external remote control, and the nonelectrochemical nature of the process.

Construction of hollow mesoporous silica nanoreactors for enhanced photo-oxidations over Au-Pt catalysts.

It is highly desirable to design hollow structures with multi-scale functions by mimicking cells for the construction of micro/nanoreactors. Herein, we report the construction of hollow-structured submicrometer-photoreactors with bimetallic catalysts loaded within mesoporous silicas. The synthesis parameters are optimized to study the evolution of hollow structure through hydrothermal treatment and an 'adhesive-contraction' formation mechanism is proposed. AuPt@HMZS catalysts exhibited a broader absorbance region under visible light and the adsorption edge displayed a red-shift, indicating the strong metal-metal interactions at the alloy interface. The reaction performance of the coupled Au-Pt catalysts can be tuned to achieve excellent catalytic activity in cinnamyl alcohol oxidation to cinnamic acid for 3.1 mmol g-1 with 99% selectivity. The proposed strategy to build hollow structures as multifunctional micro/nanoreactors is promising for the design of high-performance and sustainable catalysts for chemical synthesis.

Micro-Raman spectroscopic observation of water expulsion induced destruction of hydrophobic clusters in crystalline lysozyme.

In this paper, three kinds of solid lysozyme samples with different water contents were investigated by confocal Raman spectroscopy. For the rod-like lysozyme crystal with highest water content, a sudden decrease of the intensity ratio of the doublet at 1338 and 1360 cm(-1) was observed when the ambient relative humidity (RH) was lower than 86%, indicating the destruction of hydrophobic clusters of lysozyme induced by the expulsion of the hydration water from the crystal. In contrast to the rod-like crystal, tetragonal crystal and floor-like precipitate with a smaller amount of water showed no change of the structures of the hydrophobic clusters when the relative humidity was decreasing. The presence of bulk water in the rod-like crystal is believed a necessary factor for the function of the hydration water which promotes the hydrophobicity of hydrophobic clusters.

The effect of Fe doping on adsorption of CO2/N2 within carbon nanotubes: a density functional theory study with dispersion corrections.

An ab initio density functional theory (DFT) study with correction for dispersive interactions was performed to study the adsorption of N(2) and CO(2) inside an (8, 8) single-walled carbon nanotube. We find that the approach of combining DFT and van der Waals correction is very effective for describing the long-range interaction between N(2)/CO(2) and the carbon nanotube (CNT). Surprisingly, exohedral doping of an Fe atom onto the CNT surface will only affect the adsorption energy of the quadrupolar CO(2) molecule inside the CNT (20-30%), and not that of molecular N(2). Our results suggest the feasibility of enhancement of CO(2)/N(2) separation in CNT-based membranes by using exohedral doping of metal atoms.

First principle study of hydrogenation of MgB2: an important step toward reversible hydrogen storage in the coupled LiBH4/MgH2 system.

Recent experiments [F. E. Pinkerton, M. S. Meyer, G. P. Meisner, M. P. Balogh, and J. J. Vajo, J. Phys. Chem. C 111, 12881 (2007) and J. J. Vajo and G. L. Olson, Scripta Mater. 56, 829 (2007)] demonstrated that the recycling of hydrogen in the coupled LiBH4/MgH2 system is fully reversible. The rehydrogenation of MgB2 is an important step toward the reversibility. By using ab initio density functional theory calculations, we found that the activation barrier for the dissociation of H2 are 0.49 and 0.58 eV for the B and Mg-terminated MgB2(0001) surface, respectively. This implies that the dissociation kinetics of H2 on a MgB2(0001) surface should be greatly improved compared to that in pure Mg materials. Additionally, the diffusion of dissociated H atom on the Mg-terminated MgB2(0001) surface is almost barrier-less. Our results shed light on the experimentally-observed reversibility and improved kinetics for the coupled LiBH4/MgH2 system.

Facile synthesis and characterization of potassium-doped MnO2 nanowires.

A new type of potassium doped manganese oxide nanowires were synthesized using a simple hydrothermal route. The reduction of MnO4- in the presence of acetate species led to the formation of the Multi-filamentous nanowire structure. Detailed TEM and chemical characterizations indicated that potassium ions were homogeneously distributed in the nanowires. XPS results show a clear binding energy shift (1 eV) for K(2p) peak in nanowires compared with its starting material of KMnO4. Detailed synthetic condition investigation indicated that the presence of acetate ions played an important role in the formation of such a type of nanowires other than layered structures.

Co(3)(PO(4))(2)·4H(2)O.

Single crystals of Co(3)(PO(4))(2)·4H(2)O, tricobalt(II) bis-[ortho-phosphate(V)] tetra-hydrate, were obtained under hydro-thermal conditions. The title compound is isotypic with its zinc analogue Zn(3)(PO(4))(2)·4H(2)O (mineral name hopeite) and contains two independent Co(2+) cations. One Co(2+) cation exhibits a slightly distorted tetra-hedral coordination, while the second, located on a mirror plane, has a distorted octa-hedral coordination environment. The tetra-hedrally coordinated Co(2+) is bonded to four O atoms of four PO(4) (3-) anions, whereas the six-coordinate Co(2+) is cis-bonded to two phosphate groups and to four O atoms of four water mol-ecules (two of which are located on mirror planes), forming a framework structure. In addition, hydrogen bonds of the type O-H⋯O are present throughout the crystal structure.

A second polymorph with composition Co(3)(PO(4))(2)·H(2)O.

Single crystals of Co(3)(PO(4))(2)·H(2)O, tricobalt(II) bis-[ortho-phosphate(V)] monohydrate, were obtained under hydro-thermal conditions. The compound is the second polymorph of this composition and is isotypic with its zinc analogue, Zn(3)(PO(4))(2)·H(2)O. Three independent Co(2+) cations are bridged by two independent orthophosphate anions. Two of the metal cations exhibit a distorted tetra-hedral coordination while the third exhibits a considerably distorted [5 + 1] octa-hedral coordination environment with one very long Co-O distance of 2.416 (3) Å. The former cations are bonded to four different phosphate anions, and the latter cation is bonded to four anions (one of which is bidentate) and one water mol-ecule, leading to a framework structure. Additional hydrogen bonds of the type O-H⋯O stabilize this arrangement.

Advances in Multicompartment Mesoporous Silica Micro/Nanoparticles for Theranostic Applications.

Mesoporous silica nanoparticles (MSNs) are promising functional nanomaterials for a variety of biomedical applications, such as bioimaging, drug/gene delivery, and cancer therapy. This is due to their low density, low toxicity, high biocompatibility, large specific surface areas, and excellent thermal and mechanical stability. The past decade has seen rapid advances in the development of MSNs with multiple compartments. These include hierarchical porous structures and core-shell, yolk-shell, and Janus structured particles for efficient diagnosis and therapeutic applications. We review advances in this area, covering the categories of multicompartment MSNs and their synthesis methods, with an emphasis on hierarchical structures and the incorporation of multiple functions. We classify multicompartment mesoporous silica micro/nanostructures, ranging from core-shell and yolk-shell structures to Janus and raspberry-like nanoparticles, and discuss their synthesis methods. We review applications of these multicompartment MSNs, including bioimaging, targeted drug/gene delivery, chemotherapy, phototherapy, and in vitro diagnostics. We also highlight the latest trends and new opportunities.

Structural and morphological transformations of mesostructured titanium phosphate through hydrothermal treatment.

The phase transformation of mesostructured titanium phosphate (TiPO) from hexagonal to lamellar structure was observed in a simply hydrothermal treatment, accompanied by drastically morphological changes in the micrometer-sized particles. XRD pattern revealed that different mesostructures were obtained by simply varying hydrothermal temperature or treatment duration. SEM and TEM observations showed the morphological evolution from individual particles to interconnected nanoplatelets. A significant blue shift in UV-vis spectra was observed for lamellar mesostructured material, which may be associated with the different coordinated Ti-sites in the hexagonal and lamellar mesostructures. FT-IR spectra and detailed (31)P MAS NMR studies indicated that additional POH groups were presented in the lamellar structure, which might play a key role in the structural and morphological transformations of mesostructures.

Inorganic membranes for hydrogen production and purification: a critical review and perspective.

Hydrogen as a high-quality and clean energy carrier has attracted renewed and ever-increasing attention around the world in recent years, mainly due to developments in fuel cells and environmental pressures including climate change issues. In thermochemical processes for hydrogen production from fossil fuels, separation and purification is a critical technology. Where water-gas shift reaction is involved for converting the carbon monoxide to hydrogen, membrane reactors show great promises for shifting the equilibrium. Membranes are also important to the subsequent purification of hydrogen. For hydrogen production and purification, there are generally two classes of membranes both being inorganic: dense phase metal and metal alloys, and porous ceramic membranes. Porous ceramic membranes are normally prepared by sol-gel or hydrothermal methods, and have high stability and durability in high temperature, harsh impurity and hydrothermal environments. In particular, microporous membranes show promises in water gas shift reaction at higher temperatures. In this article, we review the recent advances in both dense phase metal and porous ceramic membranes, and compare their separation properties and performance in membrane reactor systems. The preparation, characterization and permeation of the various membranes will be presented and discussed. We also aim to examine the critical issues in these membranes with respect to the technical and economical advantages and disadvantages. Discussions will also be made on the relevance and importance of membrane technology to the new generation of zero-emission power technologies.

Clay nanosheets for topical delivery of RNAi for sustained protection against plant viruses.

Topical application of pathogen-specific double-stranded RNA (dsRNA) for virus resistance in plants represents an attractive alternative to transgenic RNA interference (RNAi). However, the instability of naked dsRNA sprayed on plants has been a major challenge towards its practical application. We demonstrate that dsRNA can be loaded on designer, non-toxic, degradable, layered double hydroxide (LDH) clay nanosheets. Once loaded on LDH, the dsRNA does not wash off, shows sustained release and can be detected on sprayed leaves even 30 days after application. We provide evidence for the degradation of LDH, dsRNA uptake in plant cells and silencing of homologous RNA on topical application. Significantly, a single spray of dsRNA loaded on LDH (BioClay) afforded virus protection for at least 20 days when challenged on sprayed and newly emerged unsprayed leaves. This innovation translates nanotechnology developed for delivery of RNAi for human therapeutics to use in crop protection as an environmentally sustainable and easy to adopt topical spray.

New insights into the interaction of hydrogen atoms with boron-substituted carbon.

Boron substitution in carbon materials has been comprehensively investigated using the density functional theory method. It was found that there is a correlation between the stability of the graphene sheet, the distribution of pi electrons, the electrostatic potential, and the capability for hydrogen-atom adsorption. Boron substitution destabilizes the graphene structure, increases the density of the electron wave around the substitutional boron atoms, and lowers the electrostatic potential, thus improving the hydrogen adsorption energy on carbon. However, this improvement is only ca. 10-20% instead of a factor of 4 or 5. Our calculations also show that two substitutional boron atoms provide consistent and reliable results, but one substitutional boron results in contradictory conclusions. This is a warning to other computational chemists who work on boron substitution that the conclusion from one substitutional boron might not be reliable.

Catalytic effects of subsurface carbon in the chemisorption of hydrogen on a Mg(0001) surface: an ab-initio study.

Ab initio density functional theory (DFT) calculations are performed to explore possible catalytic effects on the dissociative chemisorption of hydrogen on a Mg(0001) surface when carbon is incorporated into Mg materials. The computational results imply that a C atom located initially on a Mg(0001) surface can migrate into the subsurface and occupy an fcc interstitial site, with charge transfer to the C atom from neighboring Mg atoms. The effect of subsurface C on the dissociation of H2 on the Mg(0001) surface is found to be relatively marginal: a perfect sublayer of interstitial C is calculated to lower the barrier by 0.16 eV compared with that on a pure Mg(0001) surface. Further calculations reveal, however, that sublayer C may have a significant effect in enhancing the diffusion of atomic hydrogen into the sublayers through fcc channels. This contributes new physical understanding toward rationalizing the experimentally observed improvement in absorption kinetics of H2 when graphite or single walled carbon nanotubes (SWCNT) are introduced into the Mg powder during ball milling.

First-principle study of adsorption of hydrogen on Ti-doped Mg(0001) surface.

Ab initio density functional theory (DFT) calculations are performed to study the adsorption of H2 molecules on a Ti-doped Mg(0001) surface. We find that two hydrogen molecules are able to dissociate on top of the Ti atom with very small activation barriers (0.103 and 0.145 eV for the first and second H2 molecules, respectively). Additionally, a molecular adsorption state of H2 above the Ti atom is observed for the first time and is attributed to the polarization of the H2 molecule by the Ti cation. Our results parallel recent findings for H2 adsorption on Ti-doped carbon nanotubes or fullerenes. They provide new insight into the preliminary stages of hydrogen adsorption onto Ti-incorporated Mg surfaces.

Effects of carbon nanotubes and metal catalysts on hydrogen storage in magnesium nanocomposites.

This paper reports a study on nanostructured magnesium composites with carbon nanotubes (CNTs) and catalytic transition metals with high H2 adsorption capacity and fast adsorption kinetics at reduced hydrogenation temperatures. Nanostructures in such a composite are shown to be responsible for improvements in both adsorption capacity and kinetics. It is found that the carbon nanotubes significantly increase the hydrogen storage capacity, and the catalytic transition metals (Fe and Ti) greatly improve the kinetics. This could be understood from the enhancement of diffusion by CNTs and decrease in energy barrier of hydrogen dissociation at the magnesium surface.

Ru-decorated Pt surfaces as model fuel cell electrocatalysts for CO electrooxidation.

This feature article concerns Pt surfaces modified (decorated) by ruthenium as model fuel cell electrocatalysts for electrooxidation processes. This work reveals the role of ruthenium promoters in enhancing electrocatalytic activity toward organic fuels for fuel cells, and it particularly concerns the methanol decomposition product, surface CO. A special focus is on surface mobility of the CO as it is catalytically oxidized to CO(2). Different methods used to prepare Ru-decorated Pt single crystal surfaces as well as Ru-decorated Pt nanoparticles are reviewed, and the methods of characterization and testing of their activity are discussed. The focus is on the origin of peak splitting involved in the voltammetric electrooxidation of CO on Ru-decorated Pt surfaces, and on the interpretative consequences of the splitting for single crystal and nanoparticle Pt/Ru bimetallic surfaces. Apparently, screening through the literature allows formulating several models of the CO stripping reaction, and the validity of these models is discussed. Major efforts are made in this article to compare the results reported by the Urbana-Champaign group and the Munich group, but also by other groups. As electrocatalysis is progressively more and more driven by theory, our review of the experimental findings may serve to summarize the state of the art and clarify the roads ahead. Future studies will deal with highly dispersed and reactive nanoscale surfaces and other more advanced catalytic materials for fuel cell catalysis and related energy applications. It is expected that the metal/metal and metal/substrate interactions will be increasingly investigated on atomic and electronic levels, with likewise increasing participation of theory, and the structure and reactivity of various monolayer catalytic systems involving more than two metals (that is ternary and quaternary systems) will be interrogated.