RESUMEN
Quasi-2D perovskites based blue light-emitting diodes (LEDs) suffer from its poor electroluminescence performance, mainly caused by the nonradiative recombination in in defect-rich low-n phases and the unbalanced hole-electron injection in the device. Here, we developed a highly efficient quasi-2D perovskite based sky-blue LEDs behaving recorded external quantum efficiency (EQE) of 21.07% by employing carbon dots (CDs) as additives in the hole transport layer (HTL). We ascribe the high EQE to the effective engineering of CDs: (1) The CDs at the interface of HTLs can suppress the formation of low-efficient n = 1 phase, resulting a high luminescence quantum yield and energy transfer efficiency of the mixed n-phase quasi-2D perovskites. (2) The CDs additives can reduce the conductivity of HTL, partially blocking the hole injection, and thus making more balanced hole-electron injection. The CDs-treated devices have excellent Spectral stability and enhanced operational stability and could be a new alternative additive in the perovskite optoelectronic devices.
RESUMEN
Carbon dots (CDs) are promising luminescent emission layer materials for next generation electroluminescent light emitting diodes (EL-LEDs) due to their many advantages, such as environmental friendliness, low cost, and high stability. However, limited by the spin-forbidden properties of the triplet transition, it is difficult to improve the external quantum efficiency (EQE) of fluorescent CDs-based EL-LEDs. Meanwhile, traditional thermally activated delayed fluorescent (TADF) CDs prepared using coating strategies are difficult to utilize in EL-LEDs due to the nonconductivity of the coating agent. Herein, we successfully developed matrix-free TADF CDs with yellow emission and achieved a device EQE of 5.68%, which is the highest value reported in CDs-based EL-LEDs. In addition, we also developed white EL-LEDs with an EQE of 1.70%. This study highlights the importance of interactions between precursors in modulating the electroluminescence properties of TADF emitters and provides an effective design principle for matrix-free TADF CDs.
RESUMEN
The discovery of efficient and stable electrocatalysts for oxygen evolution reaction (OER) in acid is vital for the commercialization of the proton-exchange membrane water electrolyzer. In this work, we demonstrate that short-range Ru atom arrays with near-ideal Ru-Ru interatomic distances and a unique Ru-O hybridization state can trigger direct O*-O* radical coupling to form an intermediate O*-O*-Ru configuration during acidic OER without generating OOH* species. Further, the Ru atom arrays suppress the participation of lattice oxygen in the OER and the dissolution of active Ru. Benefiting from these advantages, the as-designed Ru array-Co3O4 electrocatalyst breaks the activity/stability trade-off that plagues RuO2-based electrocatalysts, delivering an excellent OER overpotential of only 160 mV at 10 mA cm-2 in 0.5 M H2SO4 and outstanding durability during 1500 h operation, representing one of the best acid-stable OER electrocatalysts reported to date. 18O-labeled operando spectroscopic measurements together with theoretical investigations revealed that the short-range Ru atom arrays switched on an oxide path mechanism (OPM) during the OER. Our work not only guides the design of improved acidic OER catalysts but also encourages the pursuit of short-range metal atom array-based electrocatalysts for other electrocatalytic reactions.
RESUMEN
High-power phosphor-converted white light-emitting diodes (hp-WLEDs) have been widely involved in modern society as outdoor lighting sources. In these devices, due to the Joule effect, the high applied currents cause high operation temperatures (>500 K). Under these conditions, most phosphors lose their emission, an effect known as thermal quenching (TQ). Here, we introduce a zero-dimensional (0D) metal halide, Rb3InCl6:xSb3+, as a suitable anti-TQ phosphor offering robust anti-TQ behavior up to 500 K. We ascribe this behavior of the metal halide to two factors: (1) a compensation process via thermally activated energy transfer from structural defects to emissive centers and (2) an intrinsic structural rigidity of the isolated octahedra in the 0D structure. The anti-TQ phosphor-based WLEDs can stably work at a current of 2000 mA. The low synthesis cost and nontoxic composition reported here can herald a new generation of anti-TQ phosphors for hp-WLED.
RESUMEN
Low-cost bifunctional electrocatalysts capable of efficiently driving the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are needed for the growth of a green hydrogen economy. Herein, a Ru/Co3O4 heterojunction catalyst rich in oxygen vacancies (VO) and supported on carbon cloth (RCO-VO@CC) is prepared via a solid phase reaction (SPR) strategy. A RuO2/Co9S8@CC precursor (ROC@CC) is first prepared by loading Co9S8 nanosheets onto CC, following the addition of RuO2 nanoparticles (NPs). After the SPR process in an Ar atmosphere, Ru/Co3O4 heterojunctions with abundant VO are formed on the CC. The compositionally optimized RCO-VO@CC electrocatalyst with a Ru content of 0.55 wt.% exhibits very low overpotential values of 11 and 253 mV at 10 mA cm-2 for HER and OER, respectively, in 1 m KOH. Further, a low cell voltage of only 1.49 V is required to achieve a current density of 10 mA cm-2. Density functional theoretical calculations verify that the outstanding bifunctional electrocatalytic performance originates from synergistic charge transfer between Ru metal and VO-rich Co3O4. This work reports a novel approach toward a high-efficiency HER/OER electrocatalyst for energy storage and conversion.
RESUMEN
t(1;19)(q23;p13) is one of the most common translocation genes in childhood acute lymphoblastic leukemia (ALL) and is also present in acute myeloid leukemia (AML) and mixed-phenotype acute leukemia (MPAL). This translocation results in the formation of the oncogenic E2A-PBX1 fusion protein, which contains a trans-activating domain from E2A and a DNA-binding homologous domain from PBX1. Despite its clear oncogenic potential, the pathogenesis of E2A-PBX1 fusion protein is not fully understood (especially in leukemias other than ALL), and effective targeted clinical therapies have not been developed. To address this, we established a stable and heritable zebrafish line expressing human E2A-PBX1 (hE2A-PBX1) for high-throughput drug screening. Blood phenotype analysis showed that hE2A-PBX1 expression induced myeloid hyperplasia by increasing myeloid differentiation propensity of hematopoietic stem cells (HSPC) and myeloid proliferation in larvae, and progressed to AML in adults. Mechanistic studies revealed that hE2A-PBX1 activated the TNF/IL-17/MAPK signaling pathway in blood cells and induced myeloid hyperplasia by upregulating the expression of runx1. Interestingly, through high-throughput drug screening, three small molecules targeting the TNF/IL-17/MAPK signaling pathway were identified, including OUL35, KJ-Pyr-9, and CID44216842, which not only alleviated the hE2A-PBX1-induced myeloid hyperplasia in zebrafish but also inhibited the growth and oncogenicity of human pre-B ALL cells with E2A-PBX1. Overall, this study provides a novel hE2APBX1 transgenic zebrafish leukemia model and identifies potential targeted therapeutic drugs, which may offer new insights into the treatment of E2A-PBX1 leukemia.
Asunto(s)
Proteínas de Fusión Oncogénica , Pez Cebra , Animales , Humanos , Animales Modificados Genéticamente , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Proliferación Celular/efectos de los fármacos , Proteínas de Homeodominio , Leucemia/genética , Leucemia/metabolismo , Leucemia/tratamiento farmacológico , Leucemia/patología , Leucemia Mieloide Aguda/genética , Leucemia Mieloide Aguda/tratamiento farmacológico , Leucemia Mieloide Aguda/metabolismo , Leucemia Mieloide Aguda/patología , Sistema de Señalización de MAP Quinasas/efectos de los fármacos , Proteínas de Fusión Oncogénica/genética , Proteínas de Fusión Oncogénica/metabolismo , Factor de Necrosis Tumoral alfa/metabolismo , Proteínas de Pez Cebra/genética , Proteínas de Pez Cebra/metabolismoRESUMEN
The electrocatalytic CO2 reduction (ECR) to produce valuable fuel is a promising process for addressing atmospheric CO2 emissions and energy shortages. In this study, Cl-anion doped cadmium sulfide structures were directly fabricated on a nickel foam surface (Cl/CdS-NF) using an inâ situ hydrothermal method. The Cl-anion doping could significantly improve ECR activity for CO production in ionic liquid and acetonitrile mixed solution, compared to pristine CdS. The highest Faradaic efficiency of CO is 98.1 % on a Cl/CdS-NF-2 cathode with an excellent current density of 137.0â mA cm-2 at -2.25â V versus ferrocene/ferrocenium (Fc/Fc+ , all potentials are versus Fc/Fc+ in this study). In particular, CO Faradaic efficiencies remained above 80 % in a wide potential range of -2.05â V to -2.45â V and a maximum partial current density (192.6â mA cm-2 ) was achieved at -2.35â V. The Cl/CdS-NF-2, with appropriate Cl anions, displayed abundant active sites and a suitable electronic structure, resulting in outstanding ECR activity. Density functional theory calculations further demonstrated that Cl/CdS is beneficial for increasing the adsorption capacities of *COOH and *H, which can enhance the activity of the ECR toward CO and suppress the hydrogen evolution reaction.
RESUMEN
Intermittent fasting remains a safe and effective strategy to ameliorate various age-related diseases, but its specific mechanisms are not fully understood. Considering that transcription factors (TFs) determine the response to environmental signals, here, we profiled the diurnal expression of 600 samples across four metabolic tissues sampled every 4 over 24 h from mice placed on five different feeding regimens to provide an atlas of TFs in biological space, time, and feeding regimen. Results showed that 1218 TFs exhibited tissue-specific and temporal expression profiles in ad libitum mice, of which 974 displayed significant oscillations at least in one tissue. Intermittent fasting triggered more than 90% (1161 in 1234) of TFs to oscillate somewhere in the body and repartitioned their tissue-specific expression. A single round of fasting generally promoted TF expression, especially in skeletal muscle and adipose tissues, while intermittent fasting mainly suppressed TF expression. Intermittent fasting down-regulated aging pathway and upregulated the pathway responsible for the inhibition of mammalian target of rapamycin (mTOR). Intermittent fasting shifts the diurnal transcriptome atlas of TFs, and mTOR inhibition may orchestrate intermittent fasting-induced health improvements. This atlas offers a reference and resource to understand how TFs and intermittent fasting may contribute to diurnal rhythm oscillation and bring about specific health benefits.
RESUMEN
In vivo imaging in the second near-infrared window (NIR-II, 1000-1700 nm), which enables us to look deeply into living subjects, is producing marvelous opportunities for biomedical research and clinical applications. Very recently, there has been an upsurge of interdisciplinary studies focusing on developing versatile types of inorganic/organic fluorophores that can be used for noninvasive NIR-IIa/IIb imaging (NIR-IIa, 1300-1400 nm; NIR-IIb, 1500-1700 nm) with near-zero tissue autofluorescence and deeper tissue penetration. This review provides an overview of the reports published to date on the design, properties, molecular imaging, and theranostics of inorganic/organic NIR-IIa/IIb fluorophores. First, we summarize the design concepts of the up-to-date functional NIR-IIa/IIb biomaterials, in the order of single-walled carbon nanotubes (SWCNTs), quantum dots (QDs), rare-earth-doped nanoparticles (RENPs), and organic fluorophores (OFs). Then, these novel imaging modalities and versatile biomedical applications brought by these superior fluorescent properties are reviewed. Finally, challenges and perspectives for future clinical translation, aiming at boosting the clinical application progress of NIR-IIa and NIR-IIb imaging technology are highlighted.
Asunto(s)
Nanotubos de Carbono , Medicina de Precisión , Colorantes Fluorescentes , Humanos , Imagen Molecular , Imagen Óptica/métodosRESUMEN
Objective: To investigate the impact of comprehensive health education on insulin therapy outcomes in diabetic patients. Methods: A total of 130 diabetes mellitus patients admitted to our hospital between January 2020 and January 2023 were enrolled. We used a randomization method to divide participants into two groups, one of which received the "admission-discharge-home follow-up" comprehensive health education program and the other which did not. They were randomly divided into an observation group and a control group (65 patients in each). The control group received conventional education, while the observation group received additional one-stop health education involving "admission-discharge-family follow-up." Various parameters, including 2-hour postprandial blood glucose (2hPG), fasting plasma glucose (FPG), glycated hemoglobin (HbA1c), insulin injection compliance, insulin standard injection mastery, and quality of life (assessed using the Insulin Therapy Related Quality of Life Questionnaire, ITR-QOL-CV), were compared between the two groups. Results: The study's key findings highlight the significant effects of a comprehensive health education program on key outcomes such as improving insulin injection compliance, improving glycemic control, and improving quality of life in patients with diabetes. Before the intervention, 2hPG, FPG, and HbA1c levels were similar in both groups (P > .05). Following the intervention, these indicators decreased in both groups, with significantly lower levels observed in the observation group (P < .05). Insulin injection compliance was comparable between the groups before the intervention (P > .05), but it increased in both groups post-intervention, with higher compliance observed in the observation group (P < .05). Similarly, scores from the insulin standard injection mastery questionnaire and ITR-QOL-CV were enhanced in both groups after the intervention, with higher scores in the observation group compared to the control group (P < .05). Conclusion: The implementation of one-stop health education involving "admission-discharge-family follow-up" led to improved insulin injection effectiveness, blood glucose control, compliance, insulin standard injection mastery, and overall quality of life in diabetic patients. These significant improvements have important clinical implications for patients with diabetes, as more efficient and consistent use of insulin injections will help to better control blood sugar levels, reducing patients' symptoms and risk of complications. For health care providers, these findings underscore the importance of providing comprehensive health education programs to improve outcomes and overall care for patients with diabetes.
RESUMEN
Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.
RESUMEN
Carbon dots (CDs) are promising nanomaterials for next-generation lighting and displays due to their tunable bandgap, high photoluminescence quantum yield (PLQY), and high stability. However, the exciton utilization efficiency (EUE) of CD-based films can only reach 25%, fundamentally limiting their application in electroluminescent light-emitting diodes (LEDs). Improving the EUE is therefore of great significance. Herein, we developed composite films containing CDs and poly(9-vinylcarbazole) (PVK). The films were then used to construct a series of high-performance electroluminescent LEDs with tunable emission colors covering the blue to green regions as the concentration of CDs in the films increased, delivering a maximum external quantum efficiency and current efficiency of 2.62% and 5.11 cd/A, respectively. Theoretical calculations and experiments established that the excellent performance at low film PLQY was due to a hot exciton effect in the CDs, achieving nearly 100% EUE. This work provides new design strategies toward high-performance CD-based electroluminescent LEDs.
RESUMEN
We report the colloidal synthesis of Bi-doped Cs2AgxNa1-xInCl6 double perovskite nanoplatelets (NPLs) exhibiting a near-unity photoluminescence quantum yield (PLQY), a record emission efficiency for nanoscale lead-free metal halides. A combination of optical spectroscopies revealed that nonradiative decay processes in the NPL were suppressed, indicating a well-passivated surface. By comparison, nanocubes with the same composition and surface ligands as the NPLs had a PLQY of only 40%. According to our calculations, the type of trap states arising from the presence of surface defects depends on their specific location: defects located on the facets of nanocubes generate only shallow traps, while those at the edges result in deep traps. In NPLs, due to their extended basal facets, most of the surface defects are facet defects. This so-called facet-defect tolerant behavior of double perovskites explains the more efficient optical emission of NPLs compared to that of nanocubes.
RESUMEN
Directional organic transformation via a green, sustainable catalytic reaction has attracted a lot of attention. Herein, we report a photoelectrochemical approach for highly selective epoxidation of alkenes in a salt solution using Co2 (OH)3 Cl (CoOCl) as a bridge of photo-generated charge, where the lattice Cl- of CoOCl can be oxidized to generate HClO by the photo-generated holes of BiVO4 photoanode and be spontaneously recovered by Cl- of a salt solution, which then oxidizes the alkenes into the corresponding epoxides. As a result, a series of water-soluble alkenes, including 4-vinylbenzenesulfonic acid sodium, 2-methyl-2-propene-1-sulfonic acid sodium, and 3-methyl-3-buten-1-ol can be epoxidized with near 100 % conversion rate and selectivity. Through further inserting a MoOx protection layer between BiVO4 and CoOCl, the stability of CoOCl-MoOx /BiVO4 can be maintained for at least 120â hours. This work opens an avenue for solar-driven organic epoxidation with a possibility of on-site reaction around the abundant ocean.
RESUMEN
Exosomal surface glycan reveals the biological function and molecular information on the protein, especially in indicating the pathogenesis of certain diseases through monitoring of specific protein glycosylation accurately. However, in situ and nondestructive measurement techniques for certain Exosomal glycoproteins are still lacking. In this work, combined with on-chip purification, we designed a proximity ligation assay-induced rolling circle amplification (RCA) strategy for highly sensitive identification of Exosomal protein-specific glycosylation based on a couple of proximity probes to target Exosomal protein and the protein-specific glycosylation site. Benefiting from efficient separation, scalable dual-recognition, and proximity-triggered RCA amplification, the proposed strategy could convert different protein-specific glycan levels to prominent changes in absorbance signals, resulting in accurate quantification of specific glycosylated Exosomal protein. When detecting the glycosylated PD-L1 on MDA-MB-231 exosomes and glycosylated PTK7 on HepG2 exosomes, the detection limits were calculated to be as low as 1.04 × 104 and 2.759 × 103 particles/mL, respectively. In addition, we further expand the dual-recognition site to investigate the potential correlation of Exosomal glycosylation with polarization of THP-1 cells toward the tumor-suppressive M1 phenotype. Overall, this strategy provides a universal tool for multiple analyses of diverse protein-specific glycosylated exosomes, exhibiting enormous potential to explore exosome function and search for new early diagnosis markers.
Asunto(s)
Exosomas , Proteínas , Glicosilación , Proteínas/análisis , Polisacáridos/metabolismo , Exosomas/químicaRESUMEN
Multicolored phosphorescent materials based on carbon dots (CDs) constructed using the same or similar precursors with long lifetimes are conducive to their wide range of practical applications due to the developed compatibility. Herein, a universal method is developed to prepare long-lived multicolored phosphorescent CD-based composites for which heavy-metal doping is not required. The multicolored CDs are encapsulated in silica via silane hydrolysis, which forms many covalent SiOC and SiC bonds; hence, the vibrations and rotations of the luminescent centers on the CD surfaces are hindered. The transformation of SiOC to a more rigid SiC moiety occurs during high-temperature calcination. Furthermore, during calcination, the silica collapses, resulting in more tightly encapsulated CDs. The synergistic effect of these two calcination phenomena produces blue, green, yellow, and red phosphorescence, at wavelengths spanning 465 to 680 nm and with lifetimes of up to 2.11 s. Taking advantage of their superior phosphorescence performances, the CD-based composites are successfully applied to 3D multichannel information storage and encryption.
RESUMEN
As a new type of solution-processed nano-laser material, carbon dots (CDs) have shown considerable potential in optical communication, laser displays, micro/nano processing, and biomedicine. Reducing the laser threshold of the gain material is of considerable significance for further development of CDs' applications in the field of micro/nano lasers. A series of blue-emissive CDs (B-CDs) are synthesized by changing the molar ratios of the precursors (citric acid (CA): L-Cysteine (L-Cys)). B-CDs have a structure of carbon nanoparticles with their surface being modified with 5-oxo-3,5-dihydro-2Hthiazolo [3,2-a]pyridine-7-carboxylic acid (TPCA). The laser can only be generated when the molar ratio of the precursors is between 1:1 and 2:1. With an increase in this ratio, the laser threshold decreases from 341.6 to 165.5 mJ cm-2 . The decrease in the laser threshold is attributed to the increase in the radiation transition rate and centralized sp3 -related excited state levels, which are favorable for light amplification and population inversion. These results will be instructional for the reasonably design of CDs-based laser materials and prompt their potential use in practical photonics.
RESUMEN
Metal-organic frameworks (MOFs) as a promising platform for electrocatalytic CO2 conversion are still restricted by the low efficiency or unsatisfied selectivity for desired products. Herein, zirconium-based porphyrinic MOF hollow nanotubes with Cd sites (Cd-PCN-222HTs) are reported for electrocatalytic CO2 -to-CO conversion. The dispersed Cd species are anchored in PCN-222HTs and coordinated by N atoms of porphyrin structures. It is discovered that Cd-PCN-222HTs have glorious electrocatalytic activity for selective CO production in ionic liquid-water (H2 O)-acetonitrile (MeCN) electrolyte. The CO Faradaic efficiency (FECO ) of >80% could be maintained in a wide potential range from -2.0 to -2.4 V versus Ag/Ag+ , and the maximum current density could reach 68.0 mA cm-2 at -2.4 V versus Ag/Ag+ with a satisfied turnover frequency of 26 220 h-1 . The enhanced efficiency of electrocatalytic CO2 conversion of Cd-PCN-222HTs is closely related to its hollow structure, anchored Cd species, and good synergistic effect with electrolyte. The density functional theory calculations indicate that the dispersed Cd sites anchored in PCN-222HTs not only favor the formation of *COOH intermediate but also hinder the hydrogen evolution reaction, resulting in high activity of electrocatalytic CO2 -to-CO conversion.
RESUMEN
Carbon dots (CDs) smaller than 10â nm constitute a new type of fluorescent carbon-based nanomaterial. They have attracted much attention owing to their unique structures and excellent photoelectric properties. Primitive CDs usually comprise carbon and oxygen and are synthesized in one step from various natural products or synthetic organic compounds, usually via microwave or hydrothermal methods. However, the uniformity of surface functional groups often make CDs lack the diversity of active sites required for specific applications. Therefore, the functionalization of CDs by specific groups is a powerful strategy for improving their photophysical and photochemical properties. This paper reviews surface modification strategies to overcome these shortcomings. Functionalizing CDs using covalent or non-covalent modification can give them unique properties and broaden their applicability.
RESUMEN
Due to their abundant valence electrons and unique electronic properties, transition metals have garnered great interest in the search for novel materials displaying various properties, including superconductivity, catalysis and so on. XRu2 (X: V, Mn, Fe, etc.) compounds, which are isostructural to AlB2, were used as examples for which we performed extensive simulations to screen for superconductivity and possible potential catalytic activity. On this basis, we found that VRu2 could achieve a superconducting critical temperature (Tc) of about 13 K. Meanwhile, our simulations showed the lowest adsorption free energy of atomic hydrogen (ΔGH) on the (0 0 1) surface of VRu2 to be about 2 meV, indicating its almost zero free energy of hydrogen adsorption with excellent catalytic performance. In addition, the results suggested potential superconducting and catalytic properties of VXRu (X = Os, Fe). Our current results have shed light on possible applications of Ru-based AlB2-type intermetallic compounds and have presented a new strategy for further designing superconductors and catalysts based on transition metals.