Negative mixing enthalpy solid solutions deliver high strength and ductility.

Body-centred cubic refractory multi-principal element alloys (MPEAs), with several refractory metal elements as constituents and featuring a yield strength greater than one gigapascal, are promising materials to meet the demands of aggressive structural applications1-6. Their low-to-no tensile ductility at room temperature, however, limits their processability and scaled-up application7-10. Here we present a HfNbTiVAl10 alloy that shows remarkable tensile ductility (roughly 20%) and ultrahigh yield strength (roughly 1,390 megapascals). Notably, these are among the best synergies compared with other related alloys. Such superb synergies derive from the addition of aluminium to the HfNbTiV alloy, resulting in a negative mixing enthalpy solid solution, which promotes strength and favours the formation of hierarchical chemical fluctuations (HCFs). The HCFs span many length scales, ranging from submicrometre to atomic scale, and create a high density of diffusive boundaries that act as effective barriers for dislocation motion. Consequently, versatile dislocation configurations are sequentially stimulated, enabling the alloy to accommodate plastic deformation while fostering substantial interactions that give rise to two unusual strain-hardening rate upturns. Thus, plastic instability is significantly delayed, which expands the plastic regime as ultralarge tensile ductility. This study provides valuable insights into achieving a synergistic combination of ultrahigh strength and large tensile ductility in MPEAs.

Decoding the Mechanisms of Reversibility Loss in Rechargeable Zinc-Air Batteries.

Attaining high reversibility of the electrodes and electrolyte is essential for the longevity of secondary batteries. Rechargeable zinc-air batteries (RZABs), however, encounter drastic irreversible changes in the zinc anodes and air cathodes during cycling. To uncover the mechanisms of reversibility loss in RZABs, we investigate the evolution of the zinc anode, alkaline electrolyte, and air electrode through experiments and first-principles calculations. Morphology diagrams of zinc anodes under versatile operating conditions reveal that the nanosized mossy zinc dominates the later cycling stage. Such anodic change is induced by the increased zincate concentration due to hydrogen evolution, which is catalyzed by the mossy structure and results in oxide passivation on electrodes and eventually leads to low true Coulombic efficiencies and short life spans of batteries. Inspired by these findings, we finally present a novel overcharge-cycling protocol to compensate for the Coulombic efficiency loss caused by hydrogen evolution and significantly extend the battery life.

Ternary Rotational Polyanion Coupling Enables Fast Li Ion Dynamics in Tetrafluoroborate Ion Doped Antiperovskite Li2OHCl Solid Electrolyte.

Li-rich antiperovskite (LiRAP) hydroxyhalides are emerging as attractive solid electrolyte (SEs) for all-solid-state Li metal batteries (ASSLMBs) due to their low melting point, low cost, and ease of scaling-up. The incorporation of rotational polyanions can reduce the activation energy and thus improve the Li ion conductivity of SEs. Herein, we propose a ternary rotational polyanion coupling strategy to fasten the Li ion conduction in tetrafluoroborate (BF4 -) ion doped LiRAP Li2OHCl. Assisted by first-principles calculation, powder X-ray diffraction, solid-state magnetic resonance and electrochemical impedance spectra, it is confirmed that Li ion transport in BF4 - ion doped Li2OHCl is strongly associated with the rotational coupling among OH-, BF4 - and Li2-O-H octahedrons, which enhances the Li ion conductivity for more than 1.8 times with the activation energy lowering 0.03 eV. This work provides a new perspective to design high-performance superionic conductors with multi-polyanions.

Manganese Local Environment Modulation via SiO4 Substitution to Boost Sodium Storage Performance of Na4 MnCr(PO4 )3.

Manganese-based Na superionic conductors (NASICONs) Na4 MnCr(PO4 )3 with three-electron reaction are attractive cathode materials for sodium-ion batteries. However, the irreversible distortion of Mn local structure leads to sluggish electrode kinetics, voltage hysteresis, and poor cycling stability. Here, SiO4 is introduced to substitute PO4 to modulate the local environment of Mn to activate the redox activity and stabilize the reversibility of Na4 MnCr(PO4 )2.9 (SiO4 )0.1 (NMCP-Si). A combined experimental and theoretical investigation have been undertaken to reveal the evolution of electronic structures and Na storage properties associated with SiO4 substitution. The NMCP-Si exhibits much-enhanced rate capability and cycling stability, being attributed to the unique Jahn-Teller distortion (Mn3+ ) that facilitates sodium de/insertion kinetics by optimizing the Na ion diffusion channels. This work addresses the challenge of stabilizing the structure of Mn-based NASICONs and represents a breakthrough in understanding how to improve the Na+ conductivity by regulating local structure.

Two-Step Redox in Polyimide: Witness by In Situ Electron Paramagnetic Resonance in Lithium-ion Batteries.

Organic materials are promising candidates for future rechargeable batteries, owing to their high natural abundance and rapidly redox reaction. Elaborating the charge/discharge process of organic electrode is critical to unveil the fundamental redox mechanism of lithium-ion batteries (LIBs), but monitoring of this process is still challenging. Here, we report a nondestructive electron paramagnetic resonance (EPR) technique to real-time detect the electron migration step within polyimide cathode. From in situ EPR tests, we vividly observe a classical redox reaction along with two-electron transfer which only shows one pair of peaks in the cyclic voltammetry curve. The radical anion and dianion intermediates are detailed delineation at redox sites in EPR spectra, which can be further confirmed through density functional theory calculations. This approach is especially crucial to elaborate the correlation behind electrochemical and molecular structure for multistep organic-based LIBs.

Electronic Perturbation of Copper Single-Atom CO2 Reduction Catalysts in a Molecular Way.

Fine-tuning electronic structures of single-atom catalysts (SACs) plays a crucial role in harnessing their catalytic activities, yet challenges remain at a molecular scale in a controlled fashion. By tailoring the structure of graphdiyne (GDY) with electron-withdrawing/-donating groups, we show herein the electronic perturbation of Cu single-atom CO2 reduction catalysts in a molecular way. The elaborately introduced functional groups (-F, -H and -OMe) can regulate the valance state of Cuδ+ , which is found to be directly scaled with the selectivity of the electrochemical CO2 -to-CH4 conversion. An optimum CH4 Faradaic efficiency of 72.3 % was achieved over the Cu SAC on the F-substituted GDY. In situ spectroscopic studies and theoretical calculations revealed that the positive Cuδ+ centers adjusted by the electron-withdrawing group decrease the pKa of adsorbed H2 O, promoting the hydrogenation of intermediates toward the CH4 production. Our strategy paves the way for precise electronic perturbation of SACs toward efficient electrocatalysis.

Single-Atom Yttrium Engineering Janus Electrode for Rechargeable Na-S Batteries.

The development of rechargeable Na-S batteries is very promising, thanks to their considerably high energy density, abundance of elements, and low costs and yet faces the issues of sluggish redox kinetics of S species and the polysulfide shuttle effect as well as Na dendrite growth. Following the theory-guided prediction, the rare-earth metal yttrium (Y)-N4 unit has been screened as a favorable Janus site for the chemical affinity of polysulfides and their electrocatalytic conversion, as well as reversible uniform Na deposition. To this end, we adopt a metal-organic framework (MOF) to prepare a single-atom hybrid with Y single atoms being incorporated into the nitrogen-doped rhombododecahedron carbon host (Y SAs/NC), which features favorable Janus properties of sodiophilicity and sulfiphilicity and thus presents highly desired electrochemical performance when used as a host of the sodium anode and the sulfur cathode of a Na-S full cell. Impressively, the Na-S full cell is capable of delivering a high capacity of 822 mAh g-1 and shows superdurable cyclability (97.5% capacity retention over 1000 cycles at a high current density of 5 A g-1). The proof-of-concept three-dimensional (3D) printed batteries and the Na-S pouch cell validate the potential practical applications of such Na-S batteries, shedding light on the development of promising Na-S full cells for future application in energy storage or power batteries.

A Hierarchical Si/C Nanocomposite of Stable Conductive Network Formed Through Thermal Phase Separation of Asphaltenes for High-Performance Li-Ion Batteries.

Silicon is one of the most promising anode materials for lithium-ion batteries. However, the huge volume change of silicon during lithiation/delithiation triggers continuous growth of solid-electrolyte interphase, loss of conductive contacts and structural collapse of the electrode, which causes a rapid deterioration of battery capacities. Inspired by the polyaromatic molecular nature and phase separation of asphaltenes in bitumen during thermal cracking, a hierarchical Si/C nanocomposite of robust carbon coatings and a firmly connected carbon framework on the silicon surface is synthesized by controlling the concentration of asphaltenes as carbon source and hence desired phase separation during the subsequent carbonization. The electrode made using this special Si/C nanocomposite exhibits a high reversible capacity of 1149 mAh g-1 after 600 cycles with a capacity retention of 98.5% and the operation ability at a high mass loading over 10 mg cm-2 or an area capacity of 23.8 mAh cm-2 , which represents one of the highest area capacities reported in open literature but with much more stable and prolonged operations. This simple and efficient strategy is easy to scale up for commercial production to meet the rapid growth of the electric vehicle industry.

Bitumen-Derived Onion-Like Soft Carbon as High-Performance Potassium-Ion Battery Anode.

Potassium-ion batteries (PIBs) have been regarded as a competitive alternative for lithium-ion batteries, owing to the natural abundance, low cost, and similar rocking-chair working mechanism of potassium element. However, it is challenging to simultaneously prepare suitable potassium ion anode materials of low voltage plateau, high capacity, and long cycle life. In this work, onion-like soft carbon (OLSC) of high heteroatom content is prepared by using solvent-sensitive self-assembly properties of asphaltene molecules. The OLSC electrode exhibits a low voltage plateau because of a high degree of graphitization. Meanwhile, it possesses excellent cycling stability and rate capability due to the high stability of the onion-like structure and fast transport of potassium ions, the latter of which is caused by heteroatom-induced expanded interlayers as found by first-principle calculations. Compared with existing carbon materials, the OLSC synthesized in this study exhibits a high reversible capacity of 466 mAh g-1 at 20 mA g-1 , a reversible capacity of 222 mAh g-1 and capacity retention of 95% after 1600 cycles at 1 A g-1 . This work connects the nanostructure of carbon materials and electrochemical performance and provides new insights in improving carbon-based anodes for PIBs.

Oxygen Vacancies and Interface Engineering on Amorphous/Crystalline CrOx -Ni3 N Heterostructures toward High-Durability and Kinetically Accelerated Water Splitting.

Manipulating catalytic active sites and reaction kinetics in alkaline media is crucial for rationally designing mighty water-splitting electrocatalysts with high efficiency. Herein, the coupling between oxygen vacancies and interface engineering is highlighted to fabricate a novel amorphous/crystalline CrOx -Ni3 N heterostructure grown on Ni foam for accelerating the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Density functional theory (DFT) calculations reveal that the electron transfer from amorphous CrOx to Ni3 N at the interfaces, and the optimized Gibbs free energies of H2 O dissociation (ΔGH-OH ) and H adsorption (ΔGH ) in the amorphous/crystalline CrOx -Ni3 N heterostructure are conducive to the superior and stable HER activity. Experimental data confirm that numerous oxygen vacancies and amorphous/crystalline interfaces in the CrOx -Ni3 N catalysts are favorable for abundant accessible active sites and enhanced intrinsic activity, resulting in excellent catalytic performances for HER and OER. Additionally, the in situ reconstruction of CrOx -Ni3 N into highly active Ni3 N/Ni(OH)2 is responsible for the optimized OER performance in a long-term stability test. Eventually, an alkaline electrolyzer using CrOx -Ni3 N as both cathode and anode has a low cell voltage of 1.53 V at 10 mA cm-2 , together with extraordinary durability for 500 h, revealing its potential in industrial applications.

N, S-Coordinated Co Single Atomic Catalyst Boosting Adsorption and Conversion of Lithium Polysulfides for Lithium-Sulfur Batteries.

Boosting reversible solid-liquid phase transformation from lithium polysulfides to Li2 S and suppressing the shuttling of lithium polysulfides from the cathode to the lithium anode are critical challenges in lithium-sulfur batteries. Here, sulfiphilic single atomic cobalt implanted in lithiophilic heteroatoms-dopped carbon (SACo@HC) matrix with a CoN3 S structure for high-performance lithium-sulfur batteries is reported. Density functional theory calculation and in situ experiments demonstrate that the optimal CoN3 S structure in SACo@HC can effectively improve the adsorption and redox conversion efficiency of lithium polysulfides. Consequently, the S-SACo@HC composite with sulfur loading of 80 wt% delivers a high capacity of 1425.1 mAh g-1 at 0.05 C and outstanding rate performance with 745.9 mAh g-1 at 4 C. Furthermore, a capacity of 680.8 mAh g-1 at 0.5 C with a low electrolyte/sulfur ratio (6 µL mg-1 ) can be achieved even after 300 cycles. With the harsh conditions of lean electrolyte (E/S = 4 µL mg-1 ) and high sulfur loading (5.4 mg cm-2 ), a superior area capacity of 5.8 mAh cm-2 can be obtained. This work contributes to building a profound understanding of the adsorption and interface engineering of lithium polysulfides and provides ideas to tackle the long-standing polysulfide shuttle problem of lithium-sulfur batteries.

Decoupled Redox Catalytic Hydrogen Production with a Robust Electrolyte-Borne Electron and Proton Carrier.

Electrolytic water splitting is an effective approach for H2 mass production. A conventional water electrolyzer concurrently generates H2 and O2 in neighboring electrode compartments separated by a membrane, which brings about compromised purity, energy efficiency, and system durability. On the basis of distinct redox electrochemistry, here, we report a system that enables the decoupling of both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) from the electrodes to two spatially separated catalyst bed reactors in alkaline solutions. Through a pair of close-loop electrochemical-chemical cycles, the system operates upon 7,8-dihydroxy-2-phenazinesulfonic acid (DHPS) and ferricyanide-mediated HER and OER, respectively, on Pt/Ni(OH)2 and NiFe(OH)2 catalysts. Near unity faradaic efficiency and sustained production of hydrogen has been demonstrated at a current density up to 100 mA/cm2. The superior reaction kinetics, particularly the HER reaction mechanism of DHPS as a robust electrolyte-borne electron and proton carriers, were scrutinized both computationally and experimentally. We anticipate the system demonstrated here would provide an intriguing alternative to the conventional water electrolytic hydrogen production.

Electrodeposition of (111)-oriented and nanotwin-doped nanocrystalline Cu with ultrahigh strength for 3D IC application.

The mechanical performance of electroplated Cu plays a crucial role in next-generation Cu-to-Cu direct bonding for the three-dimension integrated circuit (3D IC). This work reports direct-current electroplated (111)-preferred and nanotwin-doped nanocrystalline Cu, of which strength is at the forefront performance compared with all reported electroplated Cu materials. Tension and compression tests are performed to present the ultrahigh ultimate strength of 977 MPa and 1158 MPa, respectively. The microstructure of nanoscale Cu grains with an average grain size around 61 nm greatly contributes to the ultrahigh strength as described by the grain refinement effect. A gap between the obtained yield strength and the Hall-Petch relationship indicates the presence of extra strengthening mechanisms. X-ray diffraction and transmission electron microscopy analysis identify the highly (111) oriented texture and sporadic twins with optimum thicknesses, which can effectively impede intragranular dislocation movements, thus further advance the strength. Via filling capability and high throughput are also demonstrated in the patterned wafer plating. The combination of ultrahigh tensile/compressive strength, (111) preferred texture, superfilling capability and high throughput satisfies the critical requirement of Cu interconnects plating technology towards the industrial manufacturing in advanced 3D IC packaging application.

Single copper sites dispersed on defective TiO2-x as a synergistic oxygen reduction reaction catalyst.

Catalysts containing isolated single atoms have attracted much interest due to their good catalytic behavior, bridging the gap between homogeneous and heterogeneous catalysts. Here, we report an efficient oxygen reduction reaction (ORR) catalyst that consists of atomically dispersed single copper sites confined by defective mixed-phased TiO2-x. This synergistic catalyst was produced by introducing Cu2+ to a metal organic framework (MOF) using the Mannich reaction, occurring between the carbonyl group in Cu(acac)2 and the amino group on the skeleton of the MOF. The embedding of single copper atoms was confirmed by atomic-resolution high-angle annular dark-field scanning transmission electron microscopy and x-ray absorption fine structure spectroscopy. Electronic structure modulation of the single copper sites coupling with oxygen vacancies was further established by electron paramagnetic resonance spectroscopy and first-principles calculations. Significantly enhanced ORR activity and stability were achieved on this special Cu single site. The promising application of this novel electrocatalyst was demonstrated in a prototype Zn-air battery. This strategy of the stabilization of single-atom active sites by optimization of the atomic and electronic structure on a mixed matrix support sheds light on the development of highly efficient electrocatalysts.

In-Situ Intermolecular Interaction in Composite Polymer Electrolyte for Ultralong Life Quasi-Solid-State Lithium Metal Batteries.

Solid-state lithium metal batteries built with composite polymer electrolytes using cubic garnets as active fillers are particularly attractive owing to their high energy density, easy manufacturing and inherent safety. However, the uncontrollable formation of intractable contaminant on garnet surface usually aggravates poor interfacial contact with polymer matrix and deteriorates Li+ pathways. Here we report a rational designed intermolecular interaction in composite electrolytes that utilizing contaminants as reaction initiator to generate Li+ conducting ether oligomers, which further emerge as molecular cross-linkers between inorganic fillers and polymer matrix, creating dense and homogeneous interfacial Li+ immigration channels in the composite electrolytes. The delicate design results in a remarkable ionic conductivity of 1.43×10-3  S cm-1 and an unprecedented 1000 cycles with 90 % capacity retention at room temperature is achieved for the assembled solid-state batteries.

Structure Engineering of MoS2 via Simultaneous Oxygen and Phosphorus Incorporation for Improved Hydrogen Evolution.

Oxygen and phosphorus dual-doped MoS2 nanosheets (O,P-MoS2 ) with porous structure and continuous conductive network are fabricated using a one-pot NaH2 PO2 -assisted hydrothermal approach. By simply changing the precursor solution, the chemical composition and resulting structure can be effectively controlled to obtain desired properties toward the hydrogen evolution reaction (HER). Thanks to the beneficial structure and strong synergistic effects between the incorporated oxygen and phosphorus, the optimal O,P-MoS2 exhibit superior electrocatalytic performances compared with those of oxygen single-doped MoS2 nanosheets (O-MoS2 ). Specifically, a low HER onset overpotential of 150 mV with a small Tafel slope of 53 mV dec-1 , excellent conductivity, and long-term durability are achieved by the structural engineering of MoS2 via O and P co-doping, making it an efficient HER electrocatalyst for water electrocatalysis. This work provides an alternative strategy to manipulate transition metal dichalcogenides as advanced materials for electrocatalytic and related energy applications.

Flexible Membrane Consisting of MoP Ultrafine Nanoparticles Highly Distributed Inside N and P Codoped Carbon Nanofibers as High-Performance Anode for Potassium-Ion Batteries.

Rechargeable potassium-ion batteries (PIBs) have attracted tremendous attention as potential electrical energy storage systems due to the special merit of abundant resources and low cost of potassium. However, one critical barrier to achieve practical application of PIBs has been the lack of suitable electrode materials. Here, a novel flexible membrane consisting of N, P codoped carbon nanofibers decorated with MoP ultrafine nanoparticles (MoP@NPCNFs) is fabricated via a simple electrospinning method combined with the later carbonization and phosphorization process. The 3D porous CNF structure in the as-synthesized composite can shorten the transport pathways of K-ions and improve the conductivity of electrons. The ultrafine MoP nanoparticles can guarantee high specific capacity and the N, P co-doping could improve wettability of electrodes to electrolytes. As expected, the free-standing MoP@NPCNF electrode demonstrates a high capacity of 320 mAh g-1 at 100 mA g-1 , a superior rate capability maintaining 220 mAh g-1 at 2 A g-1 , as well as a capacity retention of more than 90% even after 200 cycles. The excellent rate performance, high reversible capacity, long-term cycling stability, and facile synthesis routine make this hybrid membrane promising anode for potassium-ion batteries.

Tunable Redox Chemistry and Stability of Radical Intermediates in 2D Covalent Organic Frameworks for High Performance Sodium Ion Batteries.

Radicals are inevitable intermediates during the charging and discharging of organic redox electrodes. The increase of the reactivity of the radical intermediates is desirable to maximize the capacity and enhance the rate capability but is detrimental to cycling stability. Therefore, it is a great challenge to controllably balance the redox reactivity and stability of radical intermediates to optimize the electrochemical properties with a good combination of high specific capacity, excellent rate capability, and long-term cycle life. Herein, we reported the redox and tunable stability of radical intermediates in covalent organic frameworks (COFs) considered as high capacity and stable anode for sodium-ion batteries. The comprehensive characterizations combined with theoretical simulation confirmed that the redox of C-O· and α-C radical intermediates play an important role in the sodiation/desodiation process. Specifically, the stacking behavior could be feasibly tuned by the thickness of 2D COFs, essentially determining the redox reactivity and stability of the α-C radical intermediates and their contributive capacity. The modulation of reversible redox chemistry and stabilization mechanism of radical intermediates in COFs offers a novel entry to design novel high performance organic electrode materials for energy storage and conversion.

Lamellarly Stacking Porous N, P Co-Doped Mo2 C/C Nanosheets as High Performance Anode for Lithium-Ion Batteries.

Layered stacking and highly porous N, P co-doped Mo2 C/C nanosheets are prepared from a stable Mo-enhanced hydrogel. The hydrogel is formed through the ultrafast cross-linking of phosphomolybdic acid and chitosan. During the reduction of the composite hydrogel framework under inert gas protection, highly porous N and P co-doped carbon nanosheets are produced with the in situ formation of ultrafine Mo2 C nanoparticles highly distributed throughout the nanosheets which are entangled via a hierarchical lamellar infrastructure. This unique architecture of the N, P co-doped Mo2 C/C nanosheets tremendously promote the electrochemical activity and operate stability with high specific capacity and extremely stable cycling. In particular, this versatile synthetic strategy can also be extended to other polyoxometalate (such as phosphotungstic acid) to provide greater opportunities for the controlled fabrication of novel hierarchical nanostructures for next-generation high performance energy storage applications.

Ti-V-C-Based Alloy with a FCC Lattice Structure for Hydrogen Storage.

Here we report a Ti50V50-10 wt.% C alloy with a unique lattice and microstructure for hydrogen storage development. Different from a traditionally synthesized Ti50V50 alloy prepared by a melting method and having a body-centered cubic (BCC) structure, this Ti50V50-C alloy synthesized by a mechanical alloying method is with a face-centered cubic (FCC) structure (space group: Fm-3m No. 225). The crystalline size is 60 nm. This alloy may directly absorb hydrogen near room temperature without any activation process. Mechanisms of the good kinetics from lattice and microstructure aspects were discussed. Findings reported here may indicate a new possibility in the development of future hydrogen storage materials.