Selective C(aryl)-O bond cleavage in biorenewable phenolics.

Biorefining of lignocellulosic biomass via a lignin first approach delivers a range of products with high oxygen content. Besides pulp, a lignin oil rich in guaiacols and syringols is obtained bearing multiple C(aryl)-OH and C(aryl)-OMe groups, typically named phenolics. Similarly, technical lignin can be used but is generally more difficult to process providing lower yields of monomers. Removal of the hydroxy and methoxy groups in these oxygenated arenes is challenging due to the inherently strong C-O bonds, in addition to the steric and electronic deactivation by adjacent -OH or -OMe groups. Moreover, chemoselective removal of a specific group in the presence of other similar functionalities is non-trivial. Other side-reactions such as ring saturation and transalkylation further complicate the desired reduction process. In this overview, three different selective reduction reactions are considered. Complete hydrodeoxygenation removes both hydroxy and methoxy groups resulting in benzene and alkylated derivatives (BTX type products) which is often complicated by overreduction of the arene ring. Hydrodemethoxylation selectively removes methoxy groups in the presence of hydroxy groups leading to phenol products, while hydrodehydroxylation only removes hydroxy groups without cleavage of methoxy groups giving anisole products. Instead of defunctionalization via reduction transformation of C(aryl)-OH, albeit via an initial derivatization into C(aryl)-OX, into other functionalities is possible and also discussed. In addition to methods applying guaiacols and syringols present in lignin oil as model substrates, special attention is given to methods using mixtures of these compounds obtained from wood/technical lignin. Finally, other important aspects of C-O bond activation with respect to green chemistry are discussed.

Advancements and Perspectives toward Lignin Valorization via O-Demethylation.

Lignin represents the largest aromatic carbon resource in plants, holding significant promise as a renewable feedstock for bioaromatics and other cyclic hydrocarbons in the context of the circular bioeconomy. However, the methoxy groups of aryl methyl ethers, abundantly found in technical lignins and lignin-derived chemicals, limit their pertinent chemical reactivity and broader applicability. Unlocking the phenolic hydroxyl functionality through O-demethylation (ODM) has emerged as a valuable approach to mitigate this need and enables further applications. In this review, we provide a comprehensive summary of the progress in the valorization of technical lignin and lignin-derived chemicals via ODM, both catalytic and non-catalytic reactions. Furthermore, a detailed analysis of the properties and potential applications of the O-demethylated products is presented, accompanied by a systematic overview of available ODM reactions. This review primarily focuses on enhancing the phenolic hydroxyl content in lignin-derived species through ODM, showcasing its potential in the catalytic funneling of lignin and value-added applications. A comprehensive synopsis and future outlook are included in the concluding section of this review.

Rhodium-Catalyzed Direct ortho-Arylation of Anilines.

An efficient and broadly applicable rhodium-catalyzed direct ortho-arylation of anilines with aryl iodides relying on readily available aminophosphines as traceless directing groups is reported. Its scope and functional group compatibility were both found to be quite broad as a large variety of both aminophosphines and (hetero)aryl iodides, including complex ones, could be utilized. The ortho-arylated anilines could be obtained in high average yields, without any competing diarylation and with full regioselectivity, which constitutes a major step forward compared to other processes. The reaction is moreover not limited to aryl iodides, as an aryl bromide and a triflate could be successfully used, and could be extended to diarylation. Mechanistic studies revealed the key and unique role of the aminophosphine, acting not only as a substrate but also as a ligand for the rhodium catalyst.

Iron-Catalysed Carbene Transfer to Isocyanides as a Platform for Heterocycle Synthesis.

An iron-catalysed carbene transfer reaction of diazo compounds to isocyanides has been developed. The resulting ketenimines are trapped in situ with various bisnucleophiles to access a range of densely functionalized heterocycles (pyrimidinones, dihydropyrazolones, 1H-tetrazoles) in a one-pot process. The electron-rich Hieber anion ([Fe(CO)3 NO]- ) facilitates efficient catalytic carbene transfer from acceptor-type α-diazo carbonyl compounds to isocyanides, providing a cost-efficient and benign alternative to similar noble metal-catalysed processes. Based on DFT calculations a plausible reaction mechanism for activation of the α-diazo carbonyl carbene precursor and ketenimine formation is provided.

Dearomative Spirocyclization of Tryptamine-Derived Isocyanides via Iron-Catalyzed Carbene Transfer.

Tryptamine-derived isocyanides are valuable building blocks in the construction of spirocyclic indolenines and indolines via dearomatization of the indole moiety. We report the Bu4N[Fe(CO)3NO]-catalyzed carbene transfer of α-diazo esters to 3-(2-isocyanoethyl)indoles, leading to ketenimine intermediates that undergo spontaneous dearomative spirocyclization. The utility of this iron-catalyzed carbene transfer/spirocyclization cascade was demonstrated by its use as a key step in the formal total synthesis of monoterpenoid indole alkaloids (±)-aspidofractinine, (±)-limaspermidine, (±)-aspidospermidine, and (±)-17-demethoxy-N-acetylcylindrocarine.

Synthesis of Levulinic Acids From Muconic Acids in Hot Water.

Levulinic acid is a key biorenewable platform molecule. Its current chemical production from sugars is plagued by limited yields, char formation and difficult separations. An alternative and selective route starting from muconic acid via simple heating in water at high temperature (180 °C) has been developed. Muconic acid can be obtained from sugars or catechol fermentation. Chemical oxidation of catechol is another possibility which advantageously can also be applied on substituted catechols, hereby providing substituted muconic acids. When applying the disclosed hydrothermal protocol on these substrates hitherto unknown substituted levulinic acids were accessed. In particular, 3-propyllevulinic acid has been synthesized from 4-propylcatechol, prepared from pine wood. This propylated derivative has been used for the synthesis of a 3-propyllevulinate diester, i.e. butane-1,4-diyl bis(4-oxo-3-propylpentanoate), via esterification with 1,4-butanediol. The diester showed superior performance as plasticizer in comparison to the corresponding levulinate diester in both PVC (polyvinyl chloride) and PLA (polylactic acid). It plasticizes equally effective as the notorious commercial phthalate-based benchmark DEHP (di-2-ethylhexyl phthalate) in PVC.

Efficient Synthesis of Novel Plasticizers by Direct Palladium-Catalyzed Di- or Multi-carbonylations.

Diesters are of fundamental importance in the chemical industry and are used for many applications, e.g. as plasticizers, surfactants, emulsifiers, and lubricants. Herein, we present a straightforward and efficient method for the selective synthesis of diesters via palladium-catalyzed direct carbonylation of di- or polyols with readily available alkenes. Key-to-success is the use of a specific palladium catalyst with the "built-in-base" ligand L16 providing esterification of all alcohols and a high n/iso ratio. The synthesized diesters were evaluated as potential plasticizers in PVC films by measuring the glass transition temperature (Tg ) via differential scanning calorimetry (DSC).

Homogeneous and heterogeneous catalysts for hydrogenation of CO2 to methanol under mild conditions.

In the context of a carbon neutral economy, catalytic CO2 hydrogenation to methanol is one crucial technology for CO2 mitigation providing solutions for manufacturing future fuels, chemicals, and materials. However, most of the presently known catalyst systems are used at temperatures over 220 °C, which limits the theoretical yield of methanol production due to the exothermic nature of this transformation. In this review, we summarize state-of-the-art catalysts, focusing on the rationales behind, for CO2 hydrogenation to methanol at temperatures lower than 170 °C. Both hydrogenation with homogeneous and heterogeneous catalysts is covered. Typically, additives (alcohols, amines or aminoalcohols) are used to transform CO2 into intermediates, which can further be reduced into methanol. In the first part, molecular catalysts are discussed, organized into: (1) monofunctional, (2) M/NH bifunctional, and (3) aromatization-dearomatization bifunctional molecular catalysts. In the second part, heterogeneous catalysts are elaborated, organized into: (1) metal/metal or metal/support, (2) active-site/N or active-site/OH bifunctional heterogeneous catalysts, and (3) cooperation of catalysts and additives in a tandem process via crucial intermediates. Although many insights have been gained in this transformation, in particular for molecular catalysts, the mechanisms in the presence of heterogeneous catalysts remain descriptive and insights unclear.

Selective Nickel-Catalyzed Hydrodeacetoxylation of Aryl Acetates.

Acetate serves as a renewable and easily installed leaving group for selective deoxygenation of phenolics (ArOH). Ni-catalyzed hydrodeacetoxylation of aryl acetates (Ar-OAc) with HBpin in a green carbonate solvent selectively delivers the corresponding deoxygenated arenes (ArH). The method is also applicable to highly challenging guaiacyl and syringyl acetates, leaving -OMe groups intact without arene reduction. Renewable 4-propylguaiacol obtained from pine can also be transformed without significant loss in yield versus oil derived feedstock. The observed chemoselectivity for Ar-OAc versus ArO-Ac bond cleavage was rationalized based on mechanistic experiments and DFT calculations. ArOH side-product formation is attributed to direct competitive Ni-catalyzed reduction of the C=O bond. Hydrodeacyloxylation of a set of aryl alkanoates featured interesting chemoselectivity with a dramatic influence of the length and structure of the alkyl chain on catalysis.

Transient Directing Groups in Metal-Organic Cooperative Catalysis.

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C-H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.

HFIP-mediated 2-aza-Cope rearrangement: metal-free synthesis of α-substituted homoallylamines at ambient temperature.

An efficient metal-free strategy for the synthesis of α-substituted homoallylamine derivatives has been developed via a 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-promoted 2-aza-Cope rearrangement of aldimines, generated in situ by condensation of aldehydes with easily accessible 1,1-diphenylhomoallylamines. This reaction provides rapid access to α-substituted homoallylamines with excellent functional group tolerance and yields. The reaction takes place at room temperature and no chromatographic purification is required for product isolation. The synthetic utility of the current method is further demonstrated by the transformation of the obtained benzophenone ketimines into N-unprotected homoallylamines, an α-amino alcohol and an α-amino amide.

C(sp2)-H functionalization in non-aromatic azomethine-based heterocycles.

Direct C(sp2)-H functionalization of the endocyclic azomethine and aldonitrone moieties in non-aromatic azaheterocycles has established itself as a promising methodology over the last decade. Transition metal-catalyzed cross-coupling reactions, α-metalation-electrophile quenching protocols, and (metal-free) nucleophilic substitution of hydrogen reactions (SNH) are the major routes applied on cyclic imines and their derivatives. In this overview, we show the tangible progress made in this area during the period from 2008 to 2020.

Expedient Synthesis of Bridged Bicyclic Nitrogen Scaffolds via Orthogonal Tandem Catalysis.

Bridged nitrogen bicyclic skeletons have been accessed via unprecedented site- and diastereoselective orthogonal tandem catalysis from readily accessible reactants in a step economic manner. Directed Pd-catalyzed γ-C(sp3 )-H olefination of aminocyclohexane with gem-dibromoalkenes, followed by a consecutive intramolecular Cu-catalyzed amidation of the 1-bromo-1-alkenylated product delivers the interesting normorphan skeleton. The tandem protocol can be applied on substituted aminocyclohexanes and aminoheterocycles, easily providing access to the corresponding substituted, aza- and oxa-analogues. The Cu catalyst of the Ullmann-Goldberg reaction additionally avoids off-cycle Pd catalyst scavenging by alkenylated reaction product. The picolinamide directing group stabilizes the enamine of the 7-alkylidenenormorphan, allowing further product post functionalizations. Without Cu catalyst, regio- and diastereoselective Pd-catalyzed γ-C(sp3 )-H olefination is achieved.

Synthesis of Quinazolin-4-ones by Copper-Catalyzed Isocyanide Insertion.

Herein, we report a novel copper-catalyzed imidoylative cross-coupling/cyclocondensation reaction between 2-isocyanobenzoates and amines efficiently producing quinazolin-4-ones. The reaction utilizes Cu(II) acetate as an environmentally benign catalyst in combination with a mild base and proceeds well in anisole, a recommended, sustainable solvent. Additionally, the reaction does not require dry conditions or inert atmospheres for optimal performance. The scope of this isocyanide insertion reaction is rather broad, tolerating various functionalized isocyanobenzoates and a range of substituted amines, although the use of aromatic amines as nucleophiles requires microwave heating.

Recent Advances in Palladium-Catalyzed Isocyanide Insertions.

Isocyanides have long been known as versatile chemical reagents in organic synthesis. Their ambivalent nature also allows them to function as a CO-substitute in palladium-catalyzed cross couplings. Over the past decades, isocyanides have emerged as practical and versatile C1 building blocks, whose inherent N-substitution allows for the rapid incorporation of nitrogeneous fragments in a wide variety of products. Recent developments in palladium catalyzed isocyanide insertion reactions have significantly expanded the scope and applicability of these imidoylative cross-couplings. This review highlights the advances made in this field over the past eight years.

Base Metal Catalyzed Isocyanide Insertions.

Isocyanides are diverse C1 building blocks considering their potential to react with nucleophiles, electrophiles, and radicals. Therefore, perhaps not surprisingly, isocyanides are highly valuable as inputs for multicomponent reactions (MCRs) and other one-pot cascade processes. In the field of organometallic chemistry, isocyanides typically serve as ligands for transition metals. The coordination of isocyanides to metal centers alters the electronic distribution of the isocyano moiety, and reaction pathways can therefore be accessed that are not possible in the absence of the metal. The tunable reactivity of the isocyanide functional group by transition metals has evolved into numerous useful applications. Especially palladium-catalyzed isocyanide insertion processes have emerged as powerful reactions in the past decade. However, reports on the use of earth-abundant and cheap base metals in these types of transformations are scarce and have received far less attention. In this Minireview, we focus on these emerging base metal catalyzed reactions and highlight their potential in synthetic organic chemistry. Although mechanistic studies are still scarce, we discuss distinct proposed catalytic cycles and categorize the literature according to 1) the (hetero)atom bound to and 2) the type of bonding with the transition metal in which the (formal) insertion occurs.

Brønsted Acid Catalyzed Tandem Defunctionalization of Biorenewable Ferulic acid and Derivates into Bio-Catechol.

An efficient conversion of biorenewable ferulic acid into bio-catechol has been developed. The transformation comprises two consecutive defunctionalizations of the substrate, that is, C-O (demethylation) and C-C (de-2-carboxyvinylation) bond cleavage, occurring in one step. The process only requires heating of ferulic acid with HCl (or H2 SO4 ) as catalyst in pressurized hot water (250 °C, 50 bar N2 ). The versatility is shown on a variety of other (biorenewable) substrates yielding up to 84 % di- (catechol, resorcinol, hydroquinone) and trihydroxybenzenes (pyrogallol, hydroxyquinol), in most cases just requiring simple extraction as work-up.

Directed C-H Functionalization Reactions with a Picolinamide Directing Group: Ni-Catalyzed Cleavage and Byproduct Recycling.

An efficient strategy for the cleavage of the picolinamide directing group (DG) and recycling of the byproduct generated has been developed. In this protocol, picolinamides were first Boc activated into tertiary N-Boc-N-substituted picolinamides. These were then cleaved via a Ni-catalyzed esterification reaction with EtOH to give valuable N-Boc protected amines. Ni(cod)2 was used as a catalyst without any ligands or base additives. The byproduct, ethyl 2-picolinate can be used to install the picolinamide DG in a direct or indirect manner on amines. The protocol exhibits a broad functional group tolerance and high yields. To demonstrate the utility of this approach, it was applied on many selected examples from the recent C-H functionalization literature featuring 2-picolinamide as a DG.

A comprehensive overview of directing groups applied in metal-catalysed C-H functionalisation chemistry.

The present review is devoted to summarizing the recent advances (2015-2017) in the field of metal-catalysed group-directed C-H functionalisation. In order to clearly showcase the molecular diversity that can now be accessed by means of directed C-H functionalisation, the whole is organized following the directing groups installed on a substrate. Its aim is to be a comprehensive reference work, where a specific directing group can be easily found, together with the transformations which have been carried out with it. Hence, the primary format of this review is schemes accompanied with a concise explanatory text, in which the directing groups are ordered in sections according to their chemical structure. The schemes feature typical substrates used, the products obtained as well as the required reaction conditions. Importantly, each example is commented on with respect to the most important positive features and drawbacks, on aspects such as selectivity, substrate scope, reaction conditions, directing group removal, and greenness. The targeted readership are both experts in the field of C-H functionalisation chemistry (to provide a comprehensive overview of the progress made in the last years) and, even more so, all organic chemists who want to introduce the C-H functionalisation way of thinking for a design of straightforward, efficient and step-economic synthetic routes towards molecules of interest to them. Accordingly, this review should be of particular interest also for scientists from industrial R&D sector. Hence, the overall goal of this review is to promote the application of C-H functionalisation reactions outside the research groups dedicated to method development and establishing it as a valuable reaction archetype in contemporary R&D, comparable to the role cross-coupling reactions play to date.

Catalytic Aerobic Oxidation of C(sp3 )-H Bonds.

Oxidation reactions are a key technology to transform hydrocarbons from petroleum feedstock into chemicals of a higher oxidation state, allowing further chemical transformations. These bulk-scale oxidation processes usually employ molecular oxygen as the terminal oxidant as at this scale it is typically the only economically viable oxidant. The produced commodity chemicals possess limited functionality and usually show a high degree of symmetry thereby avoiding selectivity issues. In sharp contrast, in the production of fine chemicals preference is still given to classical oxidants. Considering the strive for greener production processes, the use of O2 , the most abundant and greenest oxidant, is a logical choice. Given the rich functionality and complexity of fine chemicals, achieving regio/chemoselectivity is a major challenge. This review presents an overview of the most important catalytic systems recently described for aerobic oxidation, and the current insight in their reaction mechanism.