Analysis of ultra-short implants with different angulations: a retrospective case-control study with 2 to 9 years of follow-up.

OBJECTIVES: Does the angulation of ultrashort implants influence the stability of the peri-implant bone? The present study aimed to evaluate the effectiveness of non-axial ultrashort implants after 2 to 9 years of follow-up in resorbed alveolar ridges. MATERIALS AND METHODS: All partially edentulous patients with ultrashort implants (< 6 mm) used in the posterior region of an atrophic mandible or maxilla, to support partial dentures in conjunction with standard implants, were included in this study. Peri-implant bone loss, success and survival rates, crestal bone levels, crown-to-implant ratio and implant angulation were measured for each implant. Implants were divided into two groups: straight implants with angulation < 17° (control group) and tilted implants with angulation > 17° (test group). Statistical analysis was used to find any significant differences between the two study groups and to investigate significant linear correlations among all the variables (p = 0.05). RESULTS: A total of 42 ultrashort implants with a mean of 4 years of follow-up were included: 20 ultrashort axially loaded implants and 22 tilted implants. Mean crestal bone levels from baseline loading to maximum follow-up did not reveal statistical differences in regard to PBL; mean success and survival rates were 100% in all groups. CONCLUSIONS: PBL, success and survival rates of axial ultrashort implants and tilted ultrashort implants are comparable to those of conventional implants. CLINICAL RELEVANCE: This retrospective study revealed that ultrashort implants, even when placed with an angulation > 17°, can safely be used to support partial fixed prostheses. Further prospective clinical studies with larger samples and prospective design are needed to confirm these findings.

Nonsurgical Rhinoplasty With the Novel Hyaluronic Acid Filler VYC-25L: Results Using a Nasal Grid Approach.

BACKGROUND: Nonsurgical aesthetic treatment of the nose is becoming increasingly popular. VYC-25L is a novel hyaluronic acid product with the high G' and cohesivity required of a nasal filler. OBJECTIVES: The authors sought to assess the safety and efficacy of VYC-25L for treatment of the nose utilizing a previously published, grid-based protocol. METHODS: This was a retrospective, single-center analysis of data from adult patients undergoing treatment of the nose with VYC-25L between February and April 2019 utilizing the grid system as the reference for injection quantity and sequencing. Specific procedures included correction of inadequate projection, deep glabella treatment, correction of a nasal hump, and adjustment of the nasolabial angle and columella. Patients were followed-up for 6 to 9 months. RESULTS: A total of 61 patients were included in the analysis (mean age, 32 ±â€…3 years; n = 45 females [74%]). At 2 weeks posttreatment, a high degree of defect correction was confirmed based on independent evaluation, with all patients scoring 9 or 10 on a 10-point visual analog scale. Fifty-nine of 61 patients (97%) self-assessed the degree of correction as "adequate." Results were stable at 3- and 6-month follow-up visits. Complications recorded were bruising (n = 15, 25%), asymmetry (n = 2, 3%), and hematoma (n = 1, 2%). All resolved rapidly. There were no cases of infection, bumps, or skin necrosis. CONCLUSIONS: VYC-25L is safe and efficacious for treatment of the nose, with high levels of patient satisfaction. It has potential to be a valuable tool in nonsurgical rhinoplasty.

Influence of crown-implant ratio on implant success rate of ultra-short dental implants: results of a 8- to 10-year retrospective study.

OBJECTIVES: The use of short implants has been suggested in recent years as an option for facilitating prosthetic restoration in resorbed jawbones. The aim of the present study was to determine how implant success rate is affected in the long term when ultra-short implants are rehabilitated with fixed restorations, resulting in a crown to implant (C/I) ratio of more than 3:1. MATERIALS AND METHODS: The study was conducted as an analysis on all patients operated from December 2005 to November 2007 with ultra-short dental implants. All implants were sintered porous-surfaced (SPS) with a length of 5 mm and a diameter of 5 mm (5 × 5 mm) and were restored with a single crown or a fixed dental prosthesis (FDP). Data collected included implant positioning site, crestal bone levels (CBL), and clinical and anatomical C/I ratios, and pre-established success criteria were used to evaluate the success rate of the implants. Statistical analysis was used to determine any significant differences or correlations (p = 0.05). RESULTS: Forty-one patients completed the follow-up and were eligible for this retrospective study on a total of 50 ultra-short SPS implants. The mean follow-up was 9.5 years (range 8.3 to 10.2 years). Three of the 50 implants failed because they were lost due to peri-implantitis, while all the other 47 met the pre-established success criteria giving an overall implant success rate of 94%. During the follow-up period, the mean peri-implant bone loss (PBL) was 0.41 + 0.36 mm. CONCLUSIONS: This study shows that ultra-short SPS implants can prove a reliable solution for prosthetic restoration in patients with severe alveolar bone atrophy. In selected patients with a sufficient bone width, ultra-short implants with a resulting C/I ratio of more than 3:1 presented no contraindications. CLINICAL RELEVANCE: In selected cases, ultra-short implants may represent an alternative to bone augmentation procedures and a long-term predictable solution.

Evaluation of Crestal Bone Loss Around Straight and Tilted Implants in Patients Rehabilitated by Immediate-Loaded Full-Arch All-on-4 or All-on-6: A Prospective Study.

The aim of this prospective study was to compare implant success rate and crestal bone loss around tilted and straight implants supporting immediate-loading full-arch rehabilitations. Twenty consecutive patients with edentulous jaws treated between June 2013 and July 2015 who satisfied all inclusion and exclusion criteria were included in the study. All patients were rehabilitated through a full-arch restoration supported by 4 or 6 immediately loaded implants. Clinical and radiographic examinations were scheduled every 12 months to evaluate implant success rates and crestal bone levels. Significant differences in crestal bone levels and success rates between straight and tilted implants were investigated by means of independent statistical analysis; differences were regarded as significant if P < .05. Seventy straight and 50 tilted implants were placed to rehabilitate 14 mandibles and 12 maxillae in 20 patients. After a follow-up of 12 to 36 months, survival rate was 97.1% for straight implants and 96.0% for tilted implants; while success rates were 94.3% and 94.0%, respectively. Success and survival rates were not significantly different (P > .05). Change in crestal bone level was 0.5 ± 0.4 mm for straight implants and 0.6 ± 0.4 mm for tilted implants (P > .05). Straight and tilted implants seemed to have similar behavior after immediate loading rehabilitations. After functional loading, straight and tilted implants did not differ significantly in clinical outcome.

Relationship Between Crestal Bone Levels and Crown-to-Implant Ratio of Ultra-Short Implants With a Microrough Surface: A Prospective Study With 48 Months of Follow-Up.

The aim of this cohort study was to investigate the relationship between crestal bone levels and crown-to-implant ratio of ultra-short implants, after functional loading. Sixty patients with single or partial edentulism and alveolar bone atrophy were enrolled and treated between December 2009 and January 2016. Without using bone-grafting procedures, patients were rehabilitated with ultra-short implants characterized by a microrough surface and a 6-mm length. Clinical and anatomical crown-to-implant (C/I) ratios and crestal bone levels (CBL) were measured after a follow-up period ranging from 12 to 72 months; all peri-implant and prosthetic parameters were recorded. The data collected were statistically analyzed ( P = .05). A total of 47 patients with 66 ultra-short implants were completely followed up according to described protocol. The mean follow-up was 48.5 ± 19.1 months. The mean anatomical C/I ratio was 2.2, while the mean clinical C/I ratio was 2.6 ± 0.6 at baseline and 2.8 ± 0.6 at the last follow-up appointment. Mean CBL as calculated at the baseline was 0.7 ± 0.5 mm, while at the last appointment it measured 1.0 ± 0.5 mm. The overall implant-based success rate was 96.9%, and the mean peri-implant bone loss (PBL) was 0.3 ± 0.3 mm. No statistically significant relationship was found between anatomical or clinical C/I ratio and PBL. Ultra-short implants appear to offer a predictable solution for implant-prosthetic rehabilitation in patients with edentulism and bone atrophy. A high percentage of implants were successful, with minimal crestal bone loss. The high C/I ratio did not appear to influence either peri-implant bone loss or prosthetic complication rates.

Osteotomy in Genioplasty by Piezosurgery.

BACKGROUND: The chin is the most prominent and median sector of the lower third of the face giving harmony to nose and lips. The authors present the application of piezoelectric scalpel for the correction of different chin deformities. The distinctive characteristics of this device allow the authors to avoid or reduce the immediate genioplasty complications. METHODS: Fifty-five patients of defective chin have been treated from January 2006 to April 2008. Intraoral genioplasty was performed during the correction of dentofacial dysmorphisms or associated with nasal surgery. The authors used a piezoelectric cutting device to perform different osteotomies and if necessary, interpositional graft was used to stabilize bony segments. RESULTS: Piezosurgery has been associated with a fewer number of postoperative complications, especially as regard intraoperative bleeding, nerve injuries (immediate and late), hematomas and seromas, asymmetry (immediate and early). The mean time for completing the complete procedure of genioplasty with piezosurgery was almost the same compared with the saw and drill. CONCLUSION: Genioplasty represents one of the most common ancillary procedures and may be associated with corrective surgery of dentofacial dysmorphisms. Mental nerve injuries, asymmetries, intraoperative bleeding are the main immediate complications of genioplasty. Distinctive characteristics of ultrasonic piezoelectric osteotomy are selective cut of mineralized structure with less risk of vascular and nervous damage (microvibrations), intraoperative precision (thin cutting scalpel and no macrovibrations), blood free site (cavitation effect). In the authors' experience, piezoelectric scalpel, compared with saw and drill, enables them to reduce or avoid immediate complications of chin surgery, helping the surgeon to reach patients' satisfaction.

Anatomical Remodeling of Buccal Bone Plate in 35 Premaxillary Post-Extraction Immediately Restored Single TPS Implants: 10-Year Radiographic Investigation.

PURPOSE: The anatomical remodeling technique (ART) was proposed to place postextraction implants with the aid of specific osteotomes. This study is a clinical and radiographic evaluation with 10-year follow-up of anterior postextraction single implants placed with the ART and immediately restored. MATERIALS AND METHODS: Thirty-five patients, with a hopeless tooth in the anterior maxilla, were included in the study and 35 implants were inserted according to the ART. Clinical and radiographic evaluations were performed at baseline (T0), after 6 (T1) and 14 months (T2), 4 years after surgery (T3) and every other year up to the 10-year follow-up (T4, T5, and T6). Implant success, survival, and failure rates were evaluated according to the International Congress of Oral Implantologists Pisa Consensus Conference criteria. RESULTS: Twenty-nine patients and 29 implants were available for the 10-year data analysis. After 10 years, the accumulated mean marginal bone loss was 2.69 ± 0.42 mm. The cumulative survival rate of the implants was 100%. CONCLUSIONS: Immediately loaded postextractive implants, placed according to the ART, have been proved to be a predictable method to rehabilitate single tooth in the anterior maxilla.

Peri-implant conditions around sintered porous-surfaced (SPS) implants. A 36-month prospective cohort study.

OBJECTIVES: The specific aim of this study was to assess sintered porous-surfaced (SPS) implant system from a biological point of view, through a prospective study of the health status and the evolution of the peri-implant tissues over time and analysis of the changes observed in the various peri-implant parameters. MATERIAL AND METHODS: Hundred and fifty-one patients were treated consecutively from 2005 to 2007 using 280 SPS implants, which were restored with a single crown or a partial fixed denture. To accurately monitor the health and biological evolution of peri-implant soft and hard tissues, a number of clinical parameters were adopted, such as the modified Plaque Index (mPI), the modified sulcus Bleeding Index (mBI), Peri-implant Probing Depth (PPD), and Crestal Bone Level (CBL). Clinical and radiographic examinations were scheduled over a 36-month follow-up of functional loading according to a well-established protocol generally applied to determine implant success rates and Peri-implant Bone Loss (PBL). Statistical analysis was used to determine any significant differences or correlations (P = 0.05). RESULTS: A total of 259 SPS implants in 136 patients were followed up for 36 months. According to Buser's success criteria, the overall implant-based success rate was 98.1% and the mean PBL was 0.48 ± 0.29 mm. MBI and mPI mean values showed statistically significant differences between baseline and follow-up analyses (P < 0.001). No statistically significant differences in mean PPD values were found between baseline and control analyses (P = 0.060). CONCLUSION: This prospective cohort study revealed that the biological behavior of SPS implant system was characterized by high tissue stability during the observation period, both as regards soft and hard tissues. In particular, the crestal bone remodeling pattern was very similar to that reported in other studies, confirming that the bone loss around SPS implants, at least at 36 months, seems to be predictable.

Influence of crown-implant ratio on implant success rates and crestal bone levels: a 36-month follow-up prospective study.

OBJECTIVES: The aim of this prospective study was to determine how the crown-implant ratio (C/I ratio) influences crestal bone loss and implant success rates after a 3-year follow-up, using implants with a sintered porous surface (SPS). MATERIALS AND METHODS: On the basis of preestablished inclusion and exclusion criteria, 151 of a cohort of 160 patients with single or partial edentulism were selected as eligible for the study. The 151 patients were treated consecutively from 2005 to 2007 using 280 SPS implants, which were restored with a single crown or a partial fixed denture. The data collection included both clinical and anatomical C/I ratios; other implant prosthetic factors were also recorded. Implants were divided into three groups according to the C/I ratio. Clinical and radiographic examinations were scheduled over a 36-month follow-up of functional loading according to a well-established protocol generally applied to determine implant success rates and crestal bone levels. Statistical analysis was used to determine any significant differences or correlations (P = 0.05). RESULTS: A total of 259 SPS implants in 136 patients were followed up for 36 months. According to the success criteria, the overall implant-based success rate was 98.1%, and the mean peri-implant bone loss (PBL) was 0.48 ± 0.29 mm. Statistical analysis revealed significant correlation between implant success rate and C/I ratio (P < 0.05) and between PBL and C/I ratio (P < 0.05). The critical threshold value of the anatomical and clinical C/I ratio for avoiding excessive bone loss or implant failure was 3.10 and 3.40. CONCLUSION: This prospective cohort study revealed that SPS implants offer a predictable solution for implant prosthetic rehabilitation in patients with edentulism characterized by different alveolar bone atrophy. From the biomechanical point of view, the C/I ratio would appear to be the main parameter capable of influencing implant success and crestal bone loss. Consequently, it is important not to exceed the threshold values in order to avoid excessive stress at the bone-implant interface capable of resulting in excessive crestal bone loss or implant failure.

Immediate function of partial fixed rehabilitation with axial and tilted implants having intrasinus insertion.

Implant-supported rehabilitation of the posterior maxilla could be challenging because hyperpneumatization of the maxillary sinus might reduce the bone height. In this study, the authors report preliminary results of a new treatment modality for the partial fixed rehabilitation of posterior maxilla with immediate function by using 1 anterior axial implant and 1 posterior tilted implant with intrasinus mesial insertion. From 2009 to 2011, 10 patients (6 women and 4 men) with missing upper premolars and molars were recruited and treated according to this protocol. Each patient received a partial fixed bridge supported by 1 axial anterior implant and 1 posterior implant placed with a 30-degree mesial inclination and intrasinus insertion. Autologous bone was positioned to fill the maxillary sinus cavity and to cover the exposed implant surface after elevation of the anterior sinus membrane. A prosthesis with immediate function was positioned within 3 hours, whereas a CAD/CAM final restoration was delivered 6 months later. Follow-ups at 6 and 12 months, and then annually, were scheduled. At each follow-up, plaque level and bleeding scores were assessed, and radiographic evaluation of marginal bone level change was performed at 1 year. The patients were followed up for a mean of 50 months (range, 42-57 mo). No implants were lost, and all prostheses were stable and functional, reporting 100% of implant and prosthetic success rates. After 1 year, bone loss had a mean (SD) of 1.0 (0.4) and 0.9 (0.5) mm for axial and tilted implants, respectively, with no statistically significant differences between them (P > 0.05). The preliminary results suggest that this approach could allow the rehabilitation of posterior maxilla with immediate function in case of reduced bone volume, representing an alternative technique to bone grafting, short implants, and zygomatic or pterygoid implants.

Evaluation with a Coordinate-Measuring Machine of Dimensional Accuracy of the Abutment Duplication Technique in Cement- Retained Implant Restoration.

PURPOSE: To evaluate the effectiveness and accuracy of a proposed duplication technique in terms of one- and three-dimensional discrepancies between an original abutment and polyurethane duplicates obtained through a conventional workflow in single-implant rehabilitation. MATERIALS AND METHODS: A titanium, shoulderless abutment was chosen for a single-implant cemented rehabilitation. The master cast was made using a plastic-based die system, and the implant portion was separated. The implant section was consecutively duplicated eight times using a manual technique with polyvinyl siloxane and unfilled polyurethane resin as impression and die materials. The duplicates were analyzed with a coordinate-measuring machine (SmartScope Flash 200, Optical Gaging Products): one- and three- dimensional discrepancies were determined for each duplicate on 20 analysis points (A to T) located on the abutment surface. Changes in the abutment radius were also calculated to estimate the effects on cement thicknesses. RESULTS: One-dimensional discrepancies were -0.5 Å} 61.2 µm, -6.6 Å} 39.7 µm, and -19.4 Å} 47.8 µm on the X, Y, and Z axes, respectively; three-dimensional variation was -66.4 Å} 60.1 µm. Friedman test showed no significant difference between duplicates' one-dimensional variations on X (P = .059), Y (P = .156), or Z (P = .223) axes; a significant difference was found regarding three-dimensional changes (P < .001). Dunn test showed higher discrepancies on the X axis and on the abutment head. Mean variation of the abutment radius was -12.09 µm. CONCLUSIONS: The abutment duplication technique was shown to be an accurate and repeatable procedure for single cementable restorations.

Evaluation with a coordinate measuring machine of dimensional accuracy of the Abutment Duplication Technique in cement-retained implant restoration.

PURPOSE: To evaluate the effectiveness and accuracy of a proposed duplication technique in terms of one- and three-dimensional discrepancies between an original abutment and polyurethane duplicates obtained through a conventional workflow in single-implant rehabilitation. MATERIALS AND METHODS: A titanium shoulder-less abutment was chosen for a single-implant cemented rehabilitation. The master cast was made using a plastic-based die system, and the implant portion was separated. The implant section was consecutively duplicated eight times using a manual technique with polyvinyl siloxane and unfilled polyurethane resin as impression and die materials. The duplicates were analyzed with a coordinate-measuring machine (SmartScope Flash200, OGP): one- and three- dimensional discrepancies were determined for each duplicate on 20 analysis points (A-T) located on the abutment surface. Changes in the abutment radius were also calculated to estimate effects on cement thicknesses. RESULTS: One-dimensional discrepancies were -0.5 µm ± 61.2µm, ¬-6.6 ± 39.7 µm, and -19.4 ± 47.8 µm on X, Y, and Z axes, respectively; three-dimensional variation was -66.4 ± 60.1 µm. The Friedman test showed no significant difference between duplicates' one-dimensional variations on X (p = 0.059), Y (p = 0.156), or Z (p = 0.223) axes; a significant difference was found regarding three-dimensional changes (p < 0.001). The Dunn test showed higher discrepancies on the X axis and on the abutment head. Mean variation of the abutment radius was -12.09 µm. CONCLUSION: The abutment duplication technique was shown to be an accurate and repeatable procedure for single cementable restorations.

One-stage surgical approach to rehabilitate severely injured anterior teeth in a young woman.

Trauma of the maxillofacial district may cause severe injuries to patients, such as tooth loss or tooth fractures, which can irreversibly compromise aesthetics and function.The aim of this clinical report was to illustrate the possibility of achieving positive aesthetic and functional outcomes in a young patient through a 1-stage surgical approach. In a single stage, the patient underwent extraction of a compromised tooth, insertion of 5 implants, bone and connective grafts, and management of a fresh scar. A satisfied and appeased result from the patient's and clinician's points of view was obtained by means of some clinical tricks, avoiding the patient's stress because of a multiple-stage surgery.

Computer-assisted surgery: double surgical guides for immediate loading of implants in maxillary postextractive sites.

Implant-supported prostheses are a predictable treatment of totally edentulous patients. Progresses in implantology allowed realizing prostheses that are supported by immediately loading implants. Implants can be inserted in the healed site as fresh extraction sites, without differences about long-term results. Using computer-assisted surgery, it is possible to insert implants in a predetermined position and to create a prostheses, which can be immediately fixed on the implants. Patients have major comfort and an immediate aesthetic and functional result. The use of computer-assisted surgery in fresh extraction sites is a procedure that has not been evaluated because of technical difficulties: teeth extraction eliminates references for surgical guides. The absence of guidelines to treat dentulous areas is often likely caused by lack of computer-assisted surgery: we attempted to use this procedure to replace residual teeth with an immediate implant prosthetic rehabilitation. The aim of this clinical report was to show the possibility to apply computer-assisted surgery in dentulous patient using a double surgical template: one before extraction and the other after extraction of selected teeth.

Long-term results of immediately loaded fast bone regeneration-coated implants placed in fresh extraction sites in the upper jaw.

Recently, many authors have investigated the results of immediately loaded implants in fresh extraction sites, reporting favorable success rates, but only a few studies have included a long-term follow-up in the maxilla with analysis of clinical and radiographic data. The aim of this study was to evaluate the predictability of the immediate loading protocol with fast bone regeneration (FBR)-coated implants placed in postextractive sites in the maxilla, considering the success rate after at least 5 years of follow-up. Moreover, the clinical and radiographic results are evaluated in terms of soft tissue conditions and crestal bone loss values. One hundred fifty-eight implants were inserted following dental extraction in 70 consecutively operated patients. Each implant was immediately prosthesized. The data were collected before surgical planning, at the time of insertion, and after 3 and 5 years of occlusal loading. Specific success criteria were used to assess the success rate of immediately loaded postextraction implants. Clinical and radiographic examinations were used to determine long-term results. After a 5-year follow-up, 2 implants were lost, with a cumulative success rate of 98.7%. The radiographic and clinical data revealed well-maintained hard and soft tissues, with acceptable long-term results. The use of immediately loaded FBR-coated implants in fresh extraction sockets is shown to be a predictable technique if implants are inserted in selected cases and positioned with great care, following thorough preoperative analysis.

A case of rapidly progressive peri-implantitis around a short sintered porous-surfaced implant.

The aim of this case report is to show a rapidly progressive form of peri-implantitis around a 7 mm-long sintered porous-surfaced (SPS) implant. It was actually characterized by extremely rapid progression of bone loss, which led to the failure of one implant in about 60 days. Although surgical treatments were attempted to arrest bone resorption, peri-implantitis did not resolve. Short implants are a very useful solution for the management of highly-resorbed posterior areas. That is why patients who rehabilitated with these kinds of implants should adhere to a well-established oral hygiene protocol to prevent bone resorption, which could compromise long-term survival of short implants.

Apps for oral hygiene in children 4 to 7 years: Fun and effectiveness.

BACKGROUND: Nowadays apps in preschool age are largely used in learning improvement. The aim of this work was to test effectiveness of apps in improving oral hygiene in children patients aged from 4 to 7 years and evaluating correlation between parents educational attainment and children oral hygiene. MATERIAL AND METHODS: 100 patients aged from 4 to 7 years were randomly assigned by an external office in the study group (SG: 32 females, 18 males) and in the control group (CG: 28 females and 22 males). Plaque index (PI) and carious lesions localisation were detected. At baseline all patients and one of the parents were instructed at chair-side about the proper oral hygiene techniques. SG patients were also given app as an aid in oral hygiene practice. Follow-up was 12 months. Measurements were made every three months at chair-side visits. Information about children compliance in oral hygiene and educational level of parents were obtained by questionnaires at t0 and after 12 months. RESULTS: SG patients showed stronger oral hygiene and PI lower than those in CG. Questionnaire showed higher compliance of SG patients and parents educational level seemed to affect children oral hygiene. CONCLUSIONS: Apps in children allowed achieving encouraging results with improvement of oral hygiene and health. Key words:Apps, oral hygiene compliance, children oral hygiene, motivation, educational attainment.

Clinical and Esthetical Evaluation of 79 Lithium Disilicate Multilayered Anterior Veneers with a Medium Follow-Up of 3 Years.

OBJECTIVES: Primary aim of this study was to evaluate survival rate of lithium disilicate veneers in upper and lower anterior teeth. Secondary aims were to evaluate changing in proportions of teeth before and after restorations and to assess mean thickness of the veneers. MATERIALS AND METHODS: Seventy-nine upper and lower lithium disilicate veneers were made in 13 patients with worn teeth. Mean follow-up was 3 years. To perform anterior definitive rehabilitations, malocclusions and loss of vertical dimension were treated by full mouth rehabilitations to obtain proper occlusal conditions. Veneers were made of lithium disilicate core and fluorapatite-based ceramic stratification. Survival rate was calculated by Kaplan-Meier analysis. Changing in teeth proportion before and after restorations was analyzed by a paired t-test. Descriptive statistics of thickness values were also performed. RESULTS: One case of detachment was observed with a 98.7% survival rate. Teeth's proportions were preserved although the first upper right incisor and canine changed in dimension. CONCLUSIONS: Lithium disilicate veneers in esthetical rehabilitations of worn teeth proved to be an effective way of treatment in a medium follow-up of 3 years. Proportions seemed to be maintained with a minimum dental removal.

Injectable profiloplasty: Forehead, nose, lips, and chin filler treatment.

INTRODUCTION: We propose a medical filler treatment algorithm of the profile which includes forehead, nose, and chin and to evaluate profilometric results and complications. MATERIALS AND METHODS: 83 case reviews of associated liquid forehead, nose, and chin plasty performed consecutively from 2014 to 2016. We monitored the horizontal and vertical sagittal stability into two age group: <40 y.o. and >40 y.o. using profilometric Arnett analysis measurements on the F, Gb, Na, Nd, Nt, Sn, ULA, LLA, B, Pg, and Gn soft-tissue points. RESULTS: The results at both 3 and 6 months were consistent with the normal ranges indicated by Arnett, with a 0.8 mm maximum of defect/excess. Forehead treatment was performed in 51 (61.4%) patient. Patients >40 y.o. always needed a global correction of the forehead profile. We performed nasal treatment in 83 (100%) patient, acute nasolabial angles was the more frequent nasal defect. The lips were injected in 59 patients (71.1) more frequently >40 y.o. In 83 (100%) patients we perform a chin augmentation. The average advancement of the chin was 3 mm. CONCLUSIONS: The correction of the projection of the forehead, of the profile and shape of the nose, of the lips and chin as well as an overall improvement in face aesthetics and harmony gives a good solution in patients avoiding the need for a surgical intervention, scars and cost of general anesthesia, thus providing the optimum in patient satisfaction.

The influence of implant-abutment connection to peri-implant bone loss: A systematic review and meta-analysis.

PURPOSE: Different implant-abutment connections are available and it has been claimed they could have an effect on marginal bone loss. The aim of this review is to establish if implant connection configuration influences peri-implant bone loss (PBL) after functional loading. METHODS: A specific question was formulated according to the Population, Intervention, Control, and Outcome (PICO): Does the type of implant-abutment connection (external, internal, or conical) have an influence on peri-implant bone loss? A PubMed/MEDLINE electronic search was conducted to identify English language publications published in international journals during the last decade (from 2006 to 2016). The search was conducted by using the Medical Subject Headings (MeSH) keywords "dental implants OR dental abutment AND external connection OR internal connection OR conical connection OR Morse Taper." Selected studies were randomized clinical trials and prospective studies; in vitro studies, case reports and retrospective studies were excluded. Titles and abstracts and, in the second phase, full texts, were evaluated autonomously and in duplicate by two reviewers. RESULTS: A total of 1649 articles were found, but only 14 studies met the pre-established inclusion criteria and were considered suitable for meta-analytic analysis. The network meta-analysis (NMA) suggested a significant difference between the external and the conical connections; this was less evident for the internal and conical ones. Platform-switching (PS) seemed to positively affect bone levels, non-regarding the implant-connection it was applied to. CONCLUSIONS: Within the limitations of this systematic review, it can be concluded that crestal bone levels are better maintained in the short-medium term when internal kinds of interface are adopted. In particular, conical connections seem to be more advantageous, showing lower peri-implant bone loss, but further studies are necessary to investigate the efficacy of implant-abutment connection on stability of crestal bone levels.