Role of Nitrogenous Functional Group Identity in Accelerating 1,2,3-Trichloropropane Degradation by Pyrogenic Carbonaceous Matter (PCM) and Sulfide Using PCM-like Polymers.

Groundwater contamination by 1,2,3-trichloropropane (TCP) poses a unique challenge due to its human toxicity and recalcitrance to degradation. Previous work suggests that nitrogenous functional groups of pyrogenic carbonaceous matter (PCM), such as biochar, are important in accelerating contaminant dechlorination by sulfide. However, the reaction mechanism is unclear due, in part, to PCM's structural complexity. Herein, PCM-like polymers (PLPs) with controlled placement of nitrogenous functional groups [i.e., quaternary ammonium (QA), pyridine, and pyridinium cations (py+)] were employed as model systems to investigate PCM-enhanced TCP degradation by sulfide. Our results suggest that both PLP-QA and PLP-py+ were highly effective in facilitating TCP dechlorination by sulfide with half-lives of 16.91 ± 1.17 and 0.98 ± 0.15 days, respectively, and the reactivity increased with surface nitrogenous group density. A two-step process was proposed for TCP dechlorination, which is initiated by reductive ß-elimination, followed by nucleophilic substitution by surface-bound sulfur nucleophiles. The TCP degradation kinetics were not significantly affected by cocontaminants (i.e., 1,1,1-trichloroethane or trichloroethylene), but were slowed by natural organic matter. Our results show that PLPs containing certain nitrogen functional groups can facilitate the rapid and complete degradation of TCP by sulfide, suggesting that similarly functionalized PCM might form the basis for a novel process for the remediation of TCP-contaminated groundwater.

Probing the Surface Reactivity of Pyrogenic Carbonaceous Material (PCM) through Synthesis of PCM-Like Conjugated Microporous Polymers.

Pyrogenic carbonaceous matter (PCM) is redox-active and promotes both abiotic and biotic reactions in the environment, possibly as a result of its conductivity and phenolic/quinone functional groups. However, due to the complexity of PCM, the contribution of conductivity or phenolic/quinone functional groups to its redox activity is poorly understood, which hinders its potential engineering applications. Here, we synthesized tunable conjugated microporous polymers (CMPs) that possess key properties of PCM, which can be used as PCM analogues to provide insights to PCM reactivity. Specifically, controlled incorporation of phenolic moieties into CMPs during polymer synthesis affected electron-donating capacity, while carbonization of CMPs at various temperatures altered conductivity. Both properties were then correlated with PCM reactivity measured by the decay kinetics of a model pollutant trichloronitromethane. We demonstrate that some of the prepared CMPs enabled transformation of trichloronitromethane, while no decay was observed in the absence of CMPs. Results of further investigation suggest that trichloronitromethane decay occurs by reductive dechlorination, suggesting that CMPs are electron donors and the first dissociative electron transfer from CMPs was likely to be the rate-limiting step. Conductivity but not electron-donating capacity was positively correlated with CMP-mediated trichloronitromethane decay kinetics, suggesting an important role of the electron transfer kinetics at the interface for PCM-mediated transformation of environmental pollutants.

Effects of the Chemical Structure, Surface, and Micropore Properties of Activated and Oxidized Black Carbon on the Sorption and Desorption of Phenanthrene.

The effects of the chemical structure, surface properties, and micropore of modified black carbon samples (BCs) on the sorption mechanism of hydrophobic organic contaminants (HOCs) are discussed. Activated and oxidized BCs were produced from a shale kerogen at 250-500 °C by chemical activation regents (KOH and ZnCl2) and then by oxidative regents (H2O2 and NaClO). The surface properties (water contact angel, Boehm titration, and cation exchange capacity, CEC), structural properties (advanced solid-state 13C NMR), micropore properties (CO2 adsorption), mesopore properties (N2 adsorption), and sorption and desorption properties of phenanthrene were obtained. The results showed that ZnCl2-activated BCs had higher basic surface groups, CEC values, aromatic carbon contents, micropore volumes, and adsorption volumes but exhibited lower acidic surface groups than the KOH-activated BCs did. Micropore modeling and sorption irreversibility indicated that the micropore filling was the main sorption mechanism of phenanthrene. In addition, ZnCl2 activated and NaClO oxidized BCs showed a nice regression equation between adsorption volumes and micropore volumes (CO2- V0) as follows: Q0' = 0.495 V0 + 6.28( R2 = 0.98, p < 0.001). Moreover, the contents of nonprotonated aromatic carbon, micropore volumes, and micropore sizes are the critical factors to micropore filling mechanism of phenanthrene on BCs. The size of fused aromatic rings was estimated from the recoupled 1H-13C dipolar dephasing, and the BC structural models at temperatures ranging from 300 to 500 were proposed. This finding improves our understanding of the sorption mechanism of HOCs from the perspectives of chemical structure and micropore properties.

Comparison of the Chemical Composition of Dissolved Organic Matter in Three Lakes in Minnesota.

New information on the chemical composition of dissolved organic matter (DOM) in three lakes in Minnesota has been gained from spectral editing and two-dimensional nuclear magnetic resonance (NMR) methods, indicating the effects of lake hydrological settings on DOM composition. Williams Lake (WL), Shingobee Lake (SL), and Manganika Lake (ML) had different source inputs, and the lake water residence time (WRT) of WL was markedly longer than that of SL and ML. The hydrophobic organic acid (HPOA) and transphilic organic acid (TPIA) fractions combined comprised >50% of total DOM in these lakes, and contained carboxyl-rich alicyclic molecules (CRAM), aromatics, carbohydrates, and N-containing compounds. The previously understudied TPIA fractions contained fewer aromatics, more oxygen-rich CRAM, and more N-containing compounds compared to the corresponding HPOA. CRAM represented the predominant component in DOM from all lakes studied, and more so in WL than in SL and ML. Aromatics including lignin residues and phenols decreased in relative abundances from ML to SL and WL. Carbohydrates and N-containing compounds were minor components in both HPOA and TPIA and did not show large variations among the three lakes. The increased relative abundances of CRAM in DOM from ML, SL to WL suggested the selective preservation of CRAM with increased residence time.

Long-term litter decomposition controlled by manganese redox cycling.

Litter decomposition is a keystone ecosystem process impacting nutrient cycling and productivity, soil properties, and the terrestrial carbon (C) balance, but the factors regulating decomposition rate are still poorly understood. Traditional models assume that the rate is controlled by litter quality, relying on parameters such as lignin content as predictors. However, a strong correlation has been observed between the manganese (Mn) content of litter and decomposition rates across a variety of forest ecosystems. Here, we show that long-term litter decomposition in forest ecosystems is tightly coupled to Mn redox cycling. Over 7 years of litter decomposition, microbial transformation of litter was paralleled by variations in Mn oxidation state and concentration. A detailed chemical imaging analysis of the litter revealed that fungi recruit and redistribute unreactive Mn(2+) provided by fresh plant litter to produce oxidative Mn(3+) species at sites of active decay, with Mn eventually accumulating as insoluble Mn(3+/4+) oxides. Formation of reactive Mn(3+) species coincided with the generation of aromatic oxidation products, providing direct proof of the previously posited role of Mn(3+)-based oxidizers in the breakdown of litter. Our results suggest that the litter-decomposing machinery at our coniferous forest site depends on the ability of plants and microbes to supply, accumulate, and regenerate short-lived Mn(3+) species in the litter layer. This observation indicates that biogeochemical constraints on bioavailability, mobility, and reactivity of Mn in the plant-soil system may have a profound impact on litter decomposition rates.

Influence of aspartic acid and lysine on the uptake of gold nanoparticles in rice.

The interactions between plants and nanomaterials (NMs) can shed light on the environmental consequences of nanotechnology. We used the major crop plant rice (Oryza sativa L.) to investigate the uptake of gold nanoparticles (GNPs) coated with either negatively or positively charged ligands, over a 5-day period, in the absence or presence of one of two amino acids, aspartic acid (Asp) or lysine (Lys), acting as components of rice root exudates. The presence of Asp or Lys influenced the uptake and distribution of GNPs in rice, which depended on the electrical interaction between the coated GNPs and each amino acid. When the electrical charge of the amino acid was the same as that of the surface ligand coated onto the GNPs, the GNPs could disperse well in nutrient solution, resulting in increased uptake of GNPs into rice tissue. The opposite was true where the charge on the surface ligand was different from that on the amino acid, resulting in agglomeration and reduced Au uptake into rice tissue. The behavior of GNPs in the hydroponic nutrient solution was monitored in terms of agglomeration, particle size distribution, and surface charge in the presence and absence of Asp or Lys, which depended strongly on the electrostatic interaction. Results from this study indicated that the species of root exudates must be taken into account in assessing the bioavailability of nanomaterials to plants.

A Major Step in Opening the Black Box of High-Molecular-Weight Dissolved Organic Nitrogen by Isotopic Labeling of Synechococcus and Multibond Two-Dimensional NMR.

Dissolved organic nitrogen (DON) comprises the largest pool of fixed N in the surface ocean, yet its composition has remained poorly constrained. Knowledge of the chemical composition of this nitrogen pool is crucial for understanding its biogeochemical function and reactivity in the environment. Previous work has suggested that high-molecular-weight (high-MW) DON exists only in two closely related forms, the secondary amides of peptides and of N-acetylated hexose sugars. Here, we demonstrate that the chemical structures of high-MW DON may be much more diverse than previously thought. We couple isotopic labeling of cyanobacterially derived dissolved organic matter with advanced two-dimensional NMR spectroscopy to open the "black box" of uncharacterized high-MW DON. Using multibond NMR correlations, we have identified novel N-methyl-containing amines and amides, primary amides, and novel N-acetylated sugars, which together account for nearly 50% of cyanobacterially derived high-MW DON. This study reveals unprecedented compositional details of the previously uncharacterized DON pool and outlines the means to further advance our understanding of this biogeochemically and globally important reservoir of organic nitrogen.

Secondary Structures in a Freeze-Dried Lignite Humic Acid Fraction Caused by Hydrogen-Bonding of Acidic Protons with Aromatic Rings.

A lignite humic acid (HA) was separated from inorganic and non-HA impurities (i.e., aluminosilicates, metals) and fractionated by a combination of dialysis and XAD-8 resin. Fractionation revealed a more homogeneous structure of lignite HA. New and more specific structural information on the main lignite HA fraction is obtained by solid-state nuclear magnetic resonance (NMR) spectroscopy. Quantitative (13)C multiple cross-polarization (multiCP) NMR indicated oxidized phenyl propane structures derived from lignin. MultiCP experiments, conducted on potassium HA salts titrated to pH 10 and pH 12, revealed shifts consistent with carboxylate and phenolate formation, but structural changes associated with enolate formation from aromatic beta keto acids were not detected. Two-dimensional (1)H-(13)C heteronuclear correlation (2D HETCOR) NMR indicated aryl-aliphatic ketones, aliphatic and aromatic carboxyl groups, phenol, and methoxy phenyl ethers. Acidic protons from carboxyl groups in both the lignite HA fraction and a synthetic HA-like polycondensate were found to be hydrogen-bonded with electron-rich aromatic rings. Our results coupled with published infrared spectra provide evidence for the preferential hydrogen bonding of acidic hydrogens with electron-rich aromatic rings rather than adjacent carbonyl groups. These hydrogen-bonding interactions likely result from stereochemical arrangements in primary structures and folding.

Photochemistry of Dissolved Black Carbon Released from Biochar: Reactive Oxygen Species Generation and Phototransformation.

Dissolved black carbon (BC) released from biochar can be one of the more photoactive components in the dissolved organic matter (DOM) pool. Dissolved BC was mainly composed of aliphatics and aromatics substituted by aromatic C-O and carboxyl/ester/quinone moieties as determined by solid-state nuclear magnetic resonance. It underwent 56% loss of absorbance at 254 nm, almost complete loss of fluorescence, and 30% mineralization during a 169 h simulated sunlight exposure. Photoreactions preferentially targeted aromatic and methyl moieties, generating CH2/CH/C and carboxyl/ester/quinone functional groups. During irradiation, dissolved BC generated reactive oxygen species (ROS) including singlet oxygen and superoxide. The apparent quantum yield of singlet oxygen was 4.07 ± 0.19%, 2-3 fold higher than many well-studied DOM. Carbonyl-containing structures other than aromatic ketones were involved in the singlet oxygen sensitization. The generation of superoxide apparently depended on electron transfer reactions mediated by silica minerals in dissolved BC, in which phenolic structures served as electron donors. Self-generated ROS played an important role in the phototransformation. Photobleaching of dissolved BC decreased its ability to further generate ROS due to lower light absorption. These findings have significant implications on the environmental fate of dissolved BC and that of priority pollutants.

Sorption selectivity in natural organic matter probed with fully deuterium-exchanged and carbonyl-13C-labeled benzophenone and 1H-13C NMR spectroscopy.

Specific functional-group or domain interactions of fully deuterium-exchanged, carbonyl-(13)C-labeled benzophenone and different types of natural organic matter (NOM) were investigated through two-dimensional (1)H-(13)C heteronuclear correlation NMR spectroscopy. The sorbents included Beulah-Zap lignite, type II kerogen (IL-6), Pahokee peat, Amherst humic acid, and a polystyrene-poly(vinylmethyl ether) (PS-PVME) blend. PS-PVME consists of PS and PVME chains that are mixed on a scale of <5 nm. The NOM sorbents all consist predominantly of a mixed aromatic-alkyl or aromatic-O-alkyl matrix that is homogeneous on the 3 nm scale, as evidenced by fast equilibration of aromatic and alkyl (1)H magnetization. In addition, Beulah lignite and IL-6 kerogen exhibit small fractions of distinct polymethylene (CH2)n domains, and Pahokee peat contains significant fractions of polar and nonpolar alkyl domains. Benzophenone-((13)C═O)-d10 shows proximity to both aromatic rings and alkyl segments in all samples but preferentially interacts with aromatic rings in PS-PVME and Beulah lignite, possibly due to π-π electron donor-acceptor interactions. The data for IL-6 kerogen are also compatible with preferential location of benzophenone near the alkyl-substituted edges of aromatic rings, while in Pahokee peat, clear signatures of benzophenone affinity to both aromatic-rich and nonpolar alkyl domains have been detected. Amherst humic acid shows evidence of some affinity to polar alkyl segments but which is weaker than that to aromatic rings. Our results indicate that specific interactions of the sorbate and the presence of domains in the sorbent influence the magnitude and selectivity of sorption.

Influence of molecular structure and adsorbent properties on sorption of organic compounds to a temperature series of wood chars.

Chars from wildfires and soil amendments (biochars) are strong adsorbents that can impact the fate of organic compounds in soil, yet the effects of solute and adsorbent properties on sorption are poorly understood. We studied sorption of benzene, naphthalene, and 1,4-dinitrobenzene from water to a series of wood chars made anaerobically at different heat treatment temperatures (HTT) from 300 to 700 °C, and to graphite as a nonporous, unfunctionalized reference adsorbent. Peak suppression in the NMR spectrum by sorption of the paramagnetic relaxation probe TEMPO indicated that only a small fraction of char C atoms lie near sorption sites. Sorption intensity for all solutes maximized with the 500 °C char, but failed to trend regularly with N2 or CO2 surface area, micropore volume, mesopore volume, H/C ratio, O/C ratio, aromatic fused ring size, or HTT. A model relating sorption intensity to a weighted sum of microporosity and mesoporosity was more successful. Sorption isotherm linearity declined progressively with carbonization of the char. Application of a thermodynamic model incorporating solvent-water and char-graphite partition coefficients permitted for the first time quantification of steric (size exclusion in pores) and π-π electron donor-acceptor (EDA) free energy contributions, relative to benzene. Steric hindrance for naphthalene increases exponentially from 9 to 16 kJ/mol (∼ 1.6-2.9 log units of sorption coefficient) with the fraction of porosity in small micropores. π-π EDA interactions of dinitrobenzene contribute -17 to -19 kJ/mol (3-3.4 log units of sorption coefficient) to sorption on graphite, but less on chars. π-π EDA interaction of naphthalene on graphite is small (-2 to 2 kJ/mol). The results show that sorption is a complex function of char properties and solute molecular structure, and not very predictable on the basis of readily determined char properties.

Insights into growth stages and genotypes in airborne Pb accumulation in Oryza sativa L. grains: Utilizing isotope fingerprinting alongside a model study.

Atmospheric exposure is an important pathway of accumulation of lead (Pb) in Oryza sativa L. grains. In this study, source contributions of soil, early atmospheric exposure, and late atmospheric exposure, along with their bioaccumulation ratios were examined both in the pot and field experiments using stable Pb isotope fingerprinting technology combined with a three-compartment accumulation model. Furthermore, genotype differences in airborne Pb accumulation among four field-grown rice cultivars were investigated using the partial least squares path model (PLS-PM) linking rice Pb accumulation to agronomic traits. The findings revealed that during the late growth period, the air-foliar-grain transfer of Pb was crucial for rice Pb accumulation. Approximately 69-82% of the Pb found in polished rice was contributed by atmospheric source, with more than 80% accumulating during the late growth stage. The air accumulation ratios of rice grains were genotype-specific and estimated to be 0.364-1.062 m3/g during the late growth. Notably, grain size exhibited the highest standardized total effects on the airborne Pb concentrations in the polished rice, followed by leaf Pb and the upward translocation efficiency of Pb. The present study indicates that mitigating the health risks associated with Pb in rice can be achieved by controlling atmospheric Pb levels during the late growth stage and choosing Japonica inbred varieties characterized by large grain size.

Microbial keystone taxa drive succession of plant residue chemistry.

Managing above-ground plant carbon inputs can pave the way toward carbon neutrality and mitigating climate change. Chemical complexity of plant residues largely controls carbon sequestration. There exist conflicting opinions on whether residue chemistry diverges or converges after long-term decomposition. Moreover, whether and how microbial communities regulate residue chemistry remains unclear. This study investigated the decomposition processes and residue composition dynamics of maize straw and wheat straw and related microbiomes over a period of 9 years in three climate zones. Residue chemistry exhibited a divergent-convergent trajectory during decomposition, that is, the residue composition diverged during the 0.5-3 year period under the combined effect of straw type and climate and then converged to an array of common compounds during the 3-9 year period. Chemical divergence during the first 2-3 years was primarily driven by the changes in extracellular enzyme activity influenced by keystone taxa-guided bacterial networks, and the keystone taxa belonged to Alphaproteobacteria, particularly Rhizobiales. After 9 years, microbial assimilation became dominant, leading to chemical convergence, and fungi, particularly Chaetomium, were the main contributors to microbial assimilation. Overall, this study demonstrated that keystone taxa regulate the divergent-convergent trajectory in residue chemistry.

Resveratrol reverses Palmitic Acid-induced cow neutrophils apoptosis through shifting glucose metabolism into lipid metabolism via Cav-1/ CPT 1-mediated FAO enhancement.

Elevated plasma nonesterified fatty acids (NEFAs) affect neutrophils function and longevity during the periparturient period in dairy cows. Previous research has shown that resveratrol (RSV) may protect cell viability from NEFA-induced damage by regulating energy metabolism. However, it is unclear whether RSV has a protective effect on palmitic acid (PA)-treated neutrophils. The aim of this study was to investigate the molecular regulatory mechanism of the protective effect of RSV on neutrophils. The results showed that treatment with high concentrations of RSV (50 µM, 100 µM) maintained neutrophils activity by inhibiting neutrophils apoptosis (P < 0.05). Further analysis showed that high concentrations of RSV enhanced fatty acid oxidation (FAO) to produce ATP by promoting the expression of CAV1, ACSL-1 and CPT1 (P < 0. 05) while inhibiting glycolysis by suppressing PFK1 activity (P < 0. 05) and reducing glucose transport-related protein (GLUT1/GLUT4) expression by inhibiting glucose uptake (P < 0.05). These results suggest that RSV protects neutrophils from PA-induced apoptosis by regulating energy metabolism. Our results revealed that RSV protects neutrophils from PA-induced apoptosis by shifting glucose metabolism to lipid metabolism. This study tenders to a meaningful understanding of the effects of RSV on neutrophils function in periparturient cows suffering from negative energy balance (NEB).

Structural convergence of maize and wheat straw during two-year decomposition under different climate conditions.

Straw decomposition plays an important role in soil carbon sequestration. Litter quality and climate condition are considered to be key factors that regulate straw decomposition. This study investigated the decomposition characteristics of wheat and maize straw under cold temperate, warm temperate, and midsubtropic climate conditions, and examined whether the chemical structures of straw residues became similar during decomposition under different climate conditions. Straws were put in 0.074-mm-mesh size litter bags to exclude soil fauna and buried in black soil plots at three experimental stations located in the aforementioned climate regions to rule out the impact of soil type. The decomposition rate constants of wheat straw and maize straw increased linearly with temperature, and the former was more sensitive to temperature. Climate conditions and straw quality had marked effects on the residual material structure in the first half year of decomposition, but then decreased. Wheat and maize straw showed common decomposition characteristics with a decrease of O/N-alkyl carbons and di-O-alkyls, and a simultaneous increase of alkyl carbons, aromatic carbons, aromatic C-O groups, and COO/N-C ═ O groups. Overall, the results indicated that the chemical compositions of the two types of straw became similar after 2-year decomposition under different climate conditions.

Advanced solid-state NMR characterization of marine dissolved organic matter isolated using the coupled reverse osmosis/electrodialysis method.

Advanced (13)C solid-state techniques were employed to investigate the major structural characteristics of two surface-seawater dissolved organic matter (DOM) samples isolated using the novel coupled reverse osmosis/electrodialysis method. The NMR techniques included quantitative (13)C direct polarization/magic angle spinning (DP/MAS) and DP/MAS with recoupled dipolar dephasing, (13)C cross-polarization/total sideband suppression (CP/TOSS), (13)C chemical shift anisotropy filter, CH, CH(2), and CH(n) selection, two-dimensional (1)H-(13)C heteronuclear correlation NMR (2D HETCOR), 2D HETCOR combined with dipolar dephasing, and (15)N cross-polarization/magic angle spinning (CP/MAS). The two samples (Coastal and Marine DOM) were collected at the mouth of the Ogeechee River and in the Gulf Stream, respectively. The NMR results indicated that they were structurally distinct. Coastal DOM contained significantly more aromatic and carbonyl carbons whereas Marine DOM was markedly enriched in alkoxy carbon (e.g., carbohydrate-like moieties). Both samples contained significant amide N, but Coastal DOM had nitrogen bonded to aromatic carbons. Our dipolar-dephased spectra indicated that a large fraction of alkoxy carbons were not protonated. For Coastal DOM, our NMR results were consistent with the presence of the major structural units of (1) carbohydrate-like moieties, (2) lignin residues, (3) peptides or amino sugars, and (4) COO-bonded alkyls. For Marine DOM, they were (1) carbohydrate-like moieties, (2) peptides or amino sugars, and (3) COO-bonded alkyls. In addition, both samples contained significant amounts of nonpolar alkyl groups. The potential sources of the major structural units of DOM were discussed in detail. Nonprotonated O-alkyl carbon content was proposed as a possible index of humification.

Sorption selectivity in natural organic matter studied with nitroxyl paramagnetic relaxation probes.

Sorption site selectivity and mechanism in natural organic matter (NOM) were addressed spectroscopically by the sorption of paramagnetic nitroxyl compounds (spin probes) of different polarity, TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) and HTEMPO (4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl). The sorbents were Pahokee peat, Beulah-Zap lignite, and a polystyrene-poly(vinyl methyl ether) (PS-PVME) polymer blend representing the mixed aliphatic-aromatic, polar-nonpolar character of NOM. Nuclear-electron spin interaction serves as an efficient relaxation pathway, resulting in attenuation of the (13)C-CP/TOSS NMR signal for (13)C nuclei in proximity to the N-O· group (r(-6) dependence). In the natural solids the spin probes sorbed more specifically (greater isotherm nonlinearity) and had lower rotational mobility (broader electron paramagnetic resonance signals) than in PS-PVME. Titration with spin probe indicated almost no selectivity for the different carbon functional groups of PS-PVME, and little to no selectivity for the different carbon moieties of Pahokee and Beulah, including aromatic, alkyl, O-alkyl, di-O-alkyl, and O-methyl. In any case, sorption site selectivity of spin probes to NOM was always weaker than partition selectivity found in model solvent-water (toluene, hexadecane, anisole, octanol) and cellulose-water systems. The results indicate little or no preferential sorption in NOM based on functional group chemistry or putative microdomain character, but rather are consistent with the filling of pores whose walls have an average chemical environment reflecting the bulk chemical composition of the solid. This work demonstrates for the first time the use of paramagnetic probes to study sorption specificity.

Removal of copper and cadmium from aqueous solution using switchgrass biochar produced via hydrothermal carbonization process.

Biochar produced from switchgrass via hydrothermal carbonization (HTC) was used as a sorbent for the removal of copper and cadmium from aqueous solution. The cold activation process using KOH at room temperature was developed to enhance the porous structure and sorption properties of the HTC biochar. The sorption efficiency of HTC biochar and alkali activated HTC biochar (HTCB) for removing copper and cadmium from aqueous solution were compared with commercially available powdered activated carbon (PAC). The present batch adsorption study describes the effects of solution pH, biochar dose, and contact time on copper and cadmium removal efficiency from single metal ion aqueous solutions. The activated HTCB exhibited a higher adsorption potential for copper and cadmium than HTC biochar and PAC. Experiments conducted with an initial metal concentration of 40 mg/L at pH 5.0 and contact time of 24 h resulted in close to 100% copper and cadmium removal by activated HTCB at 2 g/L, far greater than what was observed for HTC biochar (16% and 5.6%) and PAC (4% and 7.7%). The adsorption capacities of activated HTCB for cadmium removal were 34 mg/g (0.313 mmol/g) and copper removal was 31 mg/g (0.503 mmol/g).

Pyrogenic carbon-promoted haloacetic acid decarboxylation to trihalomethanes in drinking water.

Drinking water disinfection by chlorination or chloramination can result in the formation of disinfection byproducts (DBPs) such as haloacetic acids (HAAs) and trihalomethanes (THMs). Pyrogenic carbonaceous matter (PCM), such as activated carbon (AC), is commonly used as an ostensibly inert adsorbent to remove HAAs from water. HAA degradation has been mainly attributed to biological factors. This study, for the first time, revealed that abiotic HAA degradation in the presence of PCM could be important under water treatment conditions. Specifically, we observed complete destruction of Br3AA, a model HAA, in the presence of powder AC at pH 7 within 30 min. To understand the role of PCM and the reaction mechanism, we performed a systematic study using a suite of HAAs and various PCM types. We found that PCM significantly accelerated the transformation of three HAAs (Br3AA, BrCl2AA, Br2ClAA) at pH 7. Product characterization indicated an approximately 1:1 HAA molar transformation into their respective THMs following a decarboxylation pathway with PCM. The Br3AA activation energy (Ea) was measured by kinetic experiments at 15-45 °C with and without a model PCM, wherein a significant decrease in Ea from 25.7 ± 3.2 to 13.6 ± 2.2 kcal•mol-1 was observed. We further demonstrated that oxygenated functional groups on PCM (e.g., -COOH) can accelerate HAA decarboxylation using synthesized polymers to resemble PCM. Density functional theory simulations were performed to determine the enthalpy of activation (ΔH‡) for Br3AA decarboxylation with H3O+ and formic acid (HCOOH). The presence of HCOOH significantly lowered the overall ΔH‡ value for Br3AA decarboxylation, supporting the hypothesis that -COOH catalyzes the C-C bond breaking in Br3AA. Overall, our study demonstrated the importance of a previously overlooked abiotic reaction pathway, where HAAs can be quickly converted to THMs with PCM under water treatment relevant conditions. These findings have substantial implications for DBP mitigation in water quality control, particularly for potable water reuse or pre-chlorinated water that allow direct contact between HAAs and AC during filtration as well as PAC fines traveling with finished water in water distribution systems. As such, the volatilization and relative low toxicity of volatile THMs may be considered as a detoxification process to mitigate adverse DBP effects in drinking water, thereby lowering potential health risks to consumers.

Surface-catalyzed hydrolysis by pyrogenic carbonaceous matter and model polymers: An experimental and computational study on functional group and pore characteristics.

We employed a polymer network to understand what properties of pyrogenic carbonaceous matter (PCM; e.g., activated carbon) confer its reactivity, which we hereinafter referred to as PCM-like polymers (PLP). This approach allows us to delineate the role of functional groups and micropore characteristics using 2,4,6-trinitrotoluene (TNT) as a model contaminant. Six PLP were synthesized via cross-coupling chemistry with specific functionality (-OH, -NH2, -N(CH3)2, or -N(CH3)3+) and pore characteristics (mesopore, micropore). Results suggest that PCM functionality catalyzed the reaction by: (1) serving as a weak base (-OH, -NH2) to attack TNT, or (2) accumulating OH- near PCM surfaces (-N(CH3)3+). Additionally, TNT hydrolysis rates, pH and co-ion effects, and products were monitored. Microporous PLP accelerated TNT decay compared to its mesoporous counterpart, as further supported by molecular dynamics modeling results. We also demonstrated that quaternary ammonium-modified activated carbon enhanced TNT hydrolysis. These findings have broad implications for pollutant abatement and catalyst design.