Combined effects of green tea supplementation and eccentric exercise on nuclear factor erythroid 2-related factor 2 activity.

PURPOSE: This study investigated whether combining eccentric exercise and green tea supplementation synergistically increased nuclear factor erythroid 2-related factor 2 (NRF2) activity, a transcription factor responsible for coordinating endogenous antioxidant expression. METHODS: In a double-blinded, randomized, between-subjects design, 24 males (mean [SD]; 23 [3] years, 179.6 [6.1] cm, 78.8 [10.6] kg) performed 100 drop jumps following a 6 days supplementation period with either green tea (poly)phenols (n = 12; 500 mg·d-1) or a placebo (n = 12; inulin). NRF2/antioxidant response element (ARE) binding in peripheral blood mononuclear cells (PBMCs), catalase (CAT) and glutathione reductase (GR) activity, 8-hydroxy-2'-deoxyguanosine (8-OHdG) excretion, and differential leukocyte counts were measured pre-, post-, 1 h and 24 h post-exercise. RESULTS: Exercise did not increase NRF2/ARE binding (p = 0.12) (fold change vs rest: green tea = [post] 0.78 ± 0.45, [1 h] 1.17 ± 0.54, [24 h] 1.06 ± 0.56; placebo = [post] 1.40 ± 1.50, [1 h] 2.98 ± 3.70, [24 h] 1.04 ± 0.45). Furthermore, CAT activity (p = 0.12) and 8-OHdG excretion (p = 0.42) were unchanged in response to exercise and were not augmented by green tea supplementation (p > 0.05 for all). Exercise increased GR activity by 30% (p = 0.01), however no differences were found between supplement groups (p = 0.51). Leukocyte and neutrophil concentrations were only elevated post-exercise (p < 0.001 for all). CONCLUSION: Eccentric exercise, either performed alone or in conjunction with green tea supplementation, did not significantly increase NRF2 activity in PBMCs. TRIAL REGISTRATION NUMBER: osf.io/kz37g (registered: 15/09/21).

Non-invasive estimation of muscle fibre size from high-density electromyography.

Because of the biophysical relation between muscle fibre diameter and the propagation velocity of action potentials along the muscle fibres, motor unit conduction velocity could be a non-invasive index of muscle fibre size in humans. However, the relation between motor unit conduction velocity and fibre size has been only assessed indirectly in animal models and in human patients with invasive intramuscular EMG recordings, or it has been mathematically derived from computer simulations. By combining advanced non-invasive techniques to record motor unit activity in vivo, i.e. high-density surface EMG, with the gold standard technique for muscle tissue sampling, i.e. muscle biopsy, here we investigated the relation between the conduction velocity of populations of motor units identified from the biceps brachii muscle, and muscle fibre diameter. We demonstrate the possibility of predicting muscle fibre diameter (R2  = 0.66) and cross-sectional area (R2  = 0.65) from conduction velocity estimates with low systematic bias (∼2% and ∼4% respectively) and a relatively low margin of individual error (∼8% and ∼16%, respectively). The proposed neuromuscular interface opens new perspectives in the use of high-density EMG as a non-invasive tool to estimate muscle fibre size without the need of surgical biopsy sampling. The non-invasive nature of high-density surface EMG for the assessment of muscle fibre size may be useful in studies monitoring child development, ageing, space and exercise physiology, although the applicability and validity of the proposed methodology need to be more directly assessed in these specific populations by future studies. KEY POINTS: Because of the biophysical relation between muscle fibre size and the propagation velocity of action potentials along the sarcolemma, motor unit conduction velocity could represent a potential non-invasive candidate for estimating muscle fibre size in vivo. This relation has been previously assessed in animal models and humans with invasive techniques, or it has been mathematically derived from simulations. By combining high-density surface EMG with muscle biopsy, here we explored the relation between the conduction velocity of populations of motor units and muscle fibre size in healthy individuals. Our results confirmed that motor unit conduction velocity can be considered as a novel biomarker of fibre size, which can be adopted to predict muscle fibre diameter and cross-sectional area with low systematic bias and margin of individual error. The proposed neuromuscular interface opens new perspectives in the use of high-density EMG as a non-invasive tool to estimate muscle fibre size without the need of surgical biopsy sampling.

Mechanically demanding eccentric exercise increases nuclear factor erythroid 2-related factor 2 activity in human peripheral blood mononuclear cells.

PRE-REGISTRATION NUMBER: osf.io/kz37g.

Physiological and pathophysiological concentrations of fatty acids induce lipid droplet accumulation and impair functional performance of tissue engineered skeletal muscle.

Fatty acids (FA) exert physiological and pathophysiological effects leading to changes in skeletal muscle metabolism and function, however, in vitro models to investigate these changes are limited. These experiments sought to establish the effects of physiological and pathophysiological concentrations of exogenous FA upon the function of tissue engineered skeletal muscle (TESkM). Cultured initially for 14 days, C2C12 TESkM was exposed to FA-free bovine serum albumin alone or conjugated to a FA mixture (oleic, palmitic, linoleic, and α-linoleic acids [OPLA] [ratio 45:30:24:1%]) at different concentrations (200 or 800 µM) for an additional 4 days. Subsequently, TESkM morphology, functional capacity, gene expression and insulin signaling were analyzed. There was a dose response increase in the number and size of lipid droplets within the TESkM (p < .05). Exposure to exogenous FA increased the messenger RNA expression of genes involved in lipid storage (perilipin 2 [p < .05]) and metabolism (pyruvate dehydrogenase lipoamide kinase isozyme 4 [p < .01]) in a dose dependent manner. TESkM force production was reduced (tetanic and single twitch) (p < .05) and increases in transcription of type I slow twitch fiber isoform, myosin heavy chain 7, were observed when cultured with 200 µM OPLA compared to control (p < .01). Four days of OPLA exposure results in lipid accumulation in TESkM which in turn results in changes in muscle function and metabolism; thus, providing insight ito the functional and mechanistic changes of TESkM in response to exogenous FA.

Mechanical loading of bioengineered skeletal muscle in vitro recapitulates gene expression signatures of resistance exercise in vivo.

Understanding the role of mechanical loading and exercise in skeletal muscle (SkM) is paramount for delineating the molecular mechanisms that govern changes in muscle mass. However, it is unknown whether loading of bioengineered SkM in vitro adequately recapitulates the molecular responses observed after resistance exercise (RE) in vivo. To address this, the transcriptional and epigenetic (DNA methylation) responses were compared after mechanical loading in bioengineered SkM in vitro and after RE in vivo. Specifically, genes known to be upregulated/hypomethylated after RE in humans were analyzed. Ninety-three percent of these genes demonstrated similar changes in gene expression post-loading in the bioengineered muscle when compared to acute RE in humans. Furthermore, similar differences in gene expression were observed between loaded bioengineered SkM and after programmed RT in rat SkM tissue. Hypomethylation occurred for only one of the genes analysed (GRIK2) post-loading in bioengineered SkM. To further validate these findings, DNA methylation and mRNA expression of known hypomethylated and upregulated genes post-acute RE in humans were also analyzed at 0.5, 3, and 24 h post-loading in bioengineered muscle. The largest changes in gene expression occurred at 3 h, whereby 82% and 91% of genes responded similarly when compared to human and rodent SkM respectively. DNA methylation of only a small proportion of genes analyzed (TRAF1, MSN, and CTTN) significantly increased post-loading in bioengineered SkM alone. Overall, mechanical loading of bioengineered SkM in vitro recapitulates the gene expression profile of human and rodent SkM after RE in vivo. Although some genes demonstrated differential DNA methylation post-loading in bioengineered SkM, such changes across the majority of genes analyzed did not closely mimic the epigenetic response to acute-RE in humans.

Mechanical loading of tissue engineered skeletal muscle prevents dexamethasone induced myotube atrophy.

Skeletal muscle atrophy as a consequence of acute and chronic illness, immobilisation, muscular dystrophies and aging, leads to severe muscle weakness, inactivity and increased mortality. Mechanical loading is thought to be the primary driver for skeletal muscle hypertrophy, however the extent to which mechanical loading can offset muscle catabolism has not been thoroughly explored. In vitro 3D-models of skeletal muscle provide a controllable, high throughput environment and mitigating many of the ethical and methodological constraints present during in vivo experimentation. This work aimed to determine if mechanical loading would offset dexamethasone (DEX) induced skeletal muscle atrophy, in muscle engineered using the C2C12 murine cell line. Mechanical loading successfully offset myotube atrophy and functional degeneration associated with DEX regardless of whether the loading occurred before or after 24 h of DEX treatment. Furthermore, mechanical load prevented increases in MuRF-1 and MAFbx mRNA expression, critical regulators of muscle atrophy. Overall, we demonstrate the application of tissue engineered muscle to study skeletal muscle health and disease, offering great potential for future use to better understand treatment modalities for skeletal muscle atrophy.

Mechanical loading stimulates hypertrophy in tissue-engineered skeletal muscle: Molecular and phenotypic responses.

Mechanical loading of skeletal muscle results in molecular and phenotypic adaptations typified by enhanced muscle size. Studies on humans are limited by the need for repeated sampling, and studies on animals have methodological and ethical limitations. In this investigation, three-dimensional skeletal muscle was tissue-engineered utilizing the murine cell line C2C12, which bears resemblance to native tissue and benefits from the advantages of conventional in vitro experiments. The work aimed to determine if mechanical loading induced an anabolic hypertrophic response, akin to that described in vivo after mechanical loading in the form of resistance exercise. Specifically, we temporally investigated candidate gene expression and Akt-mechanistic target of rapamycin 1 signalling along with myotube growth and tissue function. Mechanical loading (construct length increase of 15%) significantly increased insulin-like growth factor-1 and MMP-2 messenger RNA expression 21 hr after overload, and the levels of the atrophic gene MAFbx were significantly downregulated 45 hr after mechanical overload. In addition, p70S6 kinase and 4EBP-1 phosphorylation were upregulated immediately after mechanical overload. Maximal contractile force was augmented 45 hr after load with a 265% increase in force, alongside significant hypertrophy of the myotubes within the engineered muscle. Overall, mechanical loading of tissue-engineered skeletal muscle induced hypertrophy and improved force production.

Development of tissue-engineered skeletal muscle manufacturing variables.

Three-dimensional tissue-engineered structures enable more representative determination of novel drug or material effects on tissue than traditional monolayer cell cultures. This study sought to better understand how key manufacturing variables affect the myotube characteristics of a skeletal muscle model toward reducing resource use and to develop an understanding of scaling on model consistency. C2C12 murine myoblasts were seeded in a tethered collagen scaffold from which directional myotubes form in response to lines of tension and a change in medium. Collagen polymerizing area length-to-width ratios greater than one were found to reduced cell-matrix attachment and remodeling forces significantly (p < .05) correlating to a reduction in cell fusion potential. Following this, utilizing a factorial design of experiment, 4 million C2C12s/ml, with a polymerizing area width 150% of the anchor point, produced the most favorable myotube characteristics and dramatically reduced the incidence of rupture. Scaled constructs showed no significant differences when compared to larger models. Approximately 20 myotubes with a variation in the alignment of <25° in the central region were consistently observed in the final models. This demonstrates the influence of initial manufacturing variables on tissue formation and has produced a benchmark model for consistent production across scaled constructs for future optimization and as a potential cost-effective preclinical testbed.

Mimicking exercise in three-dimensional bioengineered skeletal muscle to investigate cellular and molecular mechanisms of physiological adaptation.

Bioengineering of skeletal muscle in vitro in order to produce highly aligned myofibres in relevant three dimensional (3D) matrices have allowed scientists to model the in vivo skeletal muscle niche. This review discusses essential experimental considerations for developing bioengineered muscle in order to investigate exercise mimicking stimuli. We identify current knowledge for the use of electrical stimulation and co-culture with motor neurons to enhance skeletal muscle maturation and contractile function in bioengineered systems in vitro. Importantly, we provide a current opinion on the use of acute and chronic exercise mimicking stimuli (electrical stimulation and mechanical overload) and the subsequent mechanisms underlying physiological adaptation in 3D bioengineered muscle. We also identify that future studies using the latest bioreactor technology, providing simultaneous electrical and mechanical loading and flow perfusion in vitro, may provide the basis for advancing knowledge in the future. We also envisage, that more studies using genetic, pharmacological, and hormonal modifications applied in human 3D bioengineered skeletal muscle may allow for an enhanced discovery of the in-depth mechanisms underlying the response to exercise in relevant human testing systems. Finally, 3D bioengineered skeletal muscle may provide an opportunity to be used as a pre-clinical in vitro test-bed to investigate the mechanisms underlying catabolic disease, while modelling disease itself via the use of cells derived from human patients without exposing animals or humans (in phase I trials) to the side effects of potential therapies.

Resolvin E1 (Rv E1 ) attenuates LPS induced inflammation and subsequent atrophy in C2C12 myotubes.

Resolution of inflammation is now known to be an active process which in part is instigated and controlled by specialized pro-resolving lipid mediators (SPM's) derived from dietary omega-3 fatty acids. Resolvin E1 (Rv E1 ) is one of these SPM's derived from the omega-3 fatty acid eicosapentaenoic acid. Using both molecular and phenotypic functional measures we report that in a model of Lipopolysaccharide (LPS) induced inflammation, Rv E1 attenuated mRNA levels of both interlukin-6 and monocyte chemoattractant protein-1 whilst having no effect on tumor necrosis factor-α or interlukin-1ß in C2C12 skeletal muscle myotubes. Findings at the molecular level were transferred into similar changes in extracellular protein levels of the corresponding genes with the greatest attenuation being noted in IL-6 protein concentrations. Rv E1 instigated beneficial morphological changes through the prevention of LPS induced skeletal muscle atrophy, in tandem with attenuation of the LPS induced reduction in contractile force in tissue engineered skeletal muscle. These findings demonstrate, in our model of endotoxin induced inflammation in skeletal muscle, that Rv E1 has pro-resolving properties in this cell type. Our data provides rationale for further investigation into the mechanistic action of Rv E1 in skeletal muscle, with the vision of having potential benefits for the prevention/resolution of in-vivo skeletal muscle atrophy.

The effect of chronic high insulin exposure upon metabolic and myogenic markers in C2C12 skeletal muscle cells and myotubes.

Skeletal muscle is an insulin sensitive tissue and accounts for approximately 80% of post-prandial glucose disposal. This study describes the effects of insulin, delivered for 72 h, to skeletal muscle myoblasts during differentiation or to skeletal muscle myotubes. After chronic treatment, cultures were acutely stimulated with insulin and analyzed for total and phosphorylated Akt (Ser473 ), mRNA expression of metabolic and myogenic markers and insulin-stimulated glucose uptake. Skeletal muscle cells differentiated in the presence of insulin chronically, reduced acute insulin stimulated phosphorylation of Akt Ser473 . In addition, there was a reduction in mRNA expression of Hexokinase II (HKII), GLUT4 and PGC-1α. Insulin-stimulated glucose uptake was attenuated when cells were differentiated in the presence of insulin. In contrast, myotubes exposed to chronic insulin showed no alterations in phosphorylation of Akt Ser473 . Both HKII and GLUT4 mRNA expression were reduced by chronic exposure to insulin; while PGC-1α was not different between culture conditions and was increased by acute insulin stimulation. These data suggest that there are differential responses in insulin signalling, transcription, and glucose uptake of skeletal muscle cells when cultured in either the presence of insulin during differentiation or in myotube cultures.

Leucine elicits myotube hypertrophy and enhances maximal contractile force in tissue engineered skeletal muscle in vitro.

The amino acid leucine is thought to be important for skeletal muscle growth by virtue of its ability to acutely activate mTORC1 and enhance muscle protein synthesis, yet little data exist regarding its impact on skeletal muscle size and its ability to produce force. We utilized a tissue engineering approach in order to test whether supplementing culture medium with leucine could enhance mTORC1 signaling, myotube growth, and muscle function. Phosphorylation of the mTORC1 target proteins 4EBP-1 and rpS6 and myotube hypertrophy appeared to occur in a dose dependent manner, with 5 and 20 mM of leucine inducing similar effects, which were greater than those seen with 1 mM. Maximal contractile force was also elevated with leucine supplementation; however, although this did not appear to be enhanced with increasing leucine doses, this effect was completely ablated by co-incubation with the mTOR inhibitor rapamycin, showing that the augmented force production in the presence of leucine was mTOR sensitive. Finally, by using electrical stimulation to induce chronic (24 hr) contraction of engineered skeletal muscle constructs, we were able to show that the effects of leucine and muscle contraction are additive, since the two stimuli had cumulative effects on maximal contractile force production. These results extend our current knowledge of the efficacy of leucine as an anabolic nutritional aid showing for the first time that leucine supplementation may augment skeletal muscle functional capacity, and furthermore validates the use of engineered skeletal muscle for highly-controlled investigations into nutritional regulation of muscle physiology.

Hypoxia Impairs Muscle Function and Reduces Myotube Size in Tissue Engineered Skeletal Muscle.

Contemporary tissue engineered skeletal muscle models display a high degree of physiological accuracy compared with native tissue, and therefore may be excellent platforms to understand how various pathologies affect skeletal muscle. Chronic obstructive pulmonary disease (COPD) is a lung disease which causes tissue hypoxia and is characterized by muscle fiber atrophy and impaired muscle function. In the present study we exposed engineered skeletal muscle to varying levels of oxygen (O2 ; 21-1%) for 24 h in order to see if a COPD like muscle phenotype could be recreated in vitro, and if so, at what degree of hypoxia this occurred. Maximal contractile force was attenuated in hypoxia compared to 21% O2 ; with culture at 5% and 1% O2 causing the most pronounced effects with 62% and 56% decrements in force, respectively. Furthermore at these levels of O2 , myotubes within the engineered muscles displayed significant atrophy which was not seen at higher O2 levels. At the molecular level we observed increases in mRNA expression of MuRF-1 only at 1% O2 whereas MAFbx expression was elevated at 10%, 5%, and 1% O2 . In addition, p70S6 kinase phosphorylation (a downstream effector of mTORC1) was reduced when engineered muscle was cultured at 1% O2 , with no significant changes seen above this O2 level. Overall, these data suggest that engineered muscle exposed to O2 levels of ≤5% adapts in a manner similar to that seen in COPD patients, and thus may provide a novel model for further understanding muscle wasting associated with tissue hypoxia. J. Cell. Biochem. 118: 2599-2605, 2017. © 2017 The Authors. Journal of Cellular Biochemistry Published by Wiley Periodicals, Inc.

Creating Interactions between Tissue-Engineered Skeletal Muscle and the Peripheral Nervous System.

Effective models of mammalian tissues must allow and encourage physiologically (mimetic) correct interactions between co-cultured cell types in order to produce culture microenvironments as similar as possible to those that would normally occur in vivo. In the case of skeletal muscle, the development of such a culture model, integrating multiple relevant cell types within a biomimetic scaffold, would be of significant benefit for investigations into the development, functional performance, and pathophysiology of skeletal muscle tissue. Although some work has been published regarding the behaviour of in vitro muscle models co-cultured with organotypic slices of CNS tissue or with stem cell-derived neurospheres, little investigation has so far been made regarding the potential to maintain isolated motor neurons within a 3D biomimetic skeletal muscle culture platform. Here, we review the current state of the art for engineering neuromuscular contacts in vitro and provide original data detailing the development of a 3D collagen-based model for the co-culture of primary muscle cells and motor neurons. The devised culture system promotes increased myoblast differentiation, forming arrays of parallel, aligned myotubes on which areas of nerve-muscle contact can be detected by immunostaining for pre- and post-synaptic proteins. Quantitative RT-PCR results indicate that motor neuron presence has a positive effect on myotube maturation, suggesting neural incorporation influences muscle development and maturation in vitro. The importance of this work is discussed in relation to other published neuromuscular co-culture platforms along with possible future directions for the field.

Exercise duration-matched interval and continuous sprint cycling induce similar increases in AMPK phosphorylation, PGC-1α and VEGF mRNA expression in trained individuals.

PURPOSE: The effects of low-volume interval and continuous 'all-out' cycling, matched for total exercise duration, on mitochondrial and angiogenic cell signalling was investigated in trained individuals. METHODS: In a repeated measures design, 8 trained males ([Formula: see text], 57 ± 7 ml kg(-1) min(-1)) performed two cycling exercise protocols; interval (INT, 4 × 30 s maximal sprints interspersed by 4 min passive recovery) or continuous (CON, 2 min continuous maximal sprint). Muscle biopsies were obtained before, immediately after and 3 h post-exercise. RESULTS: Total work was 53 % greater (P = 0.01) in INT compared to CON (71.2 ± 7.3 vs. 46.3 ± 2.7 kJ, respectively). Phosphorylation of AMPK(Thr172) increased by a similar magnitude (P = 0.347) immediately post INT and CON (1.6 ± 0.2 and 1.3 ± 0.3 fold, respectively; P = 0.011), before returning to resting values at 3 h post-exercise. mRNA expression of PGC-1α (7.1 ± 2.1 vs. 5.5 ± 1.8 fold; P = 0.007), VEGF (3.5 ± 1.2 vs. 4.3 ± 1.8 fold; P = 0.02) and HIF-1α (2.0 ± 0.5 vs. 1.5 ± 0.3 fold; P = 0.04) increased at 3 h post-exercise in response to INT and CON, respectively; the magnitude of which were not different between protocols. CONCLUSIONS: Despite differences in total work done, low-volume INT and CON 'all-out' cycling, matched for exercise duration, provides a similar stimulus for the induction of mitochondrial and angiogenic cell signalling pathways in trained skeletal muscle.

Long-Term Resistance Trained Human Muscles Have More Fibres, More Myofibrils and Tighter Myofilament Packing than Untrained.

INTRODUCTION: Increases in skeletal muscle size occur in response to prolonged exposure to resistance training that is typically ascribed to increased muscle fibre size. Whether muscle fibre number also changes remains controversial, and a paucity of data exists about myofibrillar structure. This cross-sectional study compared muscle fibre and myofibril characteristics in long-term resistance-trained (LRT) versus untrained (UNT) individuals. METHODS: The maximal anatomical cross-sectional area (ACSAmax) of the biceps brachii muscle was measured by MRI in 16 LRT (5.9 ± 3.5 years' experience) and 13 UNT males. A muscle biopsy was taken from the biceps brachii to measure muscle fibre area, myofibril area and myosin spacing. Muscle fibre number, myofibril number in total and per fibre were estimated by dividing ACSAmax by muscle fibre area or myofibril area, and muscle fibre area by myofibril area, respectively. RESULTS: Compared to UNT, LRT individuals had greater ACSAmax (+70%, P < 0.001), fibre area (+29%, P = 0.028), fibre number (+34%, P = 0.013), and myofibril number per fibre (+49%, P = 0.034) and in total (+105%, P < 0.001). LRT individuals also had smaller myosin spacing (-7%, P = 0.004; i.e. greater packing density) and a tendency towards smaller myofibril area (-16%, P = 0.074). ACSAmax was positively correlated with fibre area ( r = 0.526), fibre number ( r = 0.445) and myofibril number (in total r = 0.873 and per fibre r = 0.566), and negatively correlated with myofibril area ( r = -0.456) and myosin spacing ( r = -0.382) (all P < 0.05). CONCLUSIONS: The larger muscles of LRT individuals exhibited more fibres in cross-section and larger muscle fibres, which contained substantially more total myofibrils and more packed myofilaments than UNT participants, suggesting plasticity of muscle ultrastructure.

Neural decoding from surface high-density EMG signals: influence of anatomy and synchronization on the number of identified motor units.

Objective.High-density surface electromyography (HD-sEMG) allows the reliable identification of individual motor unit (MU) action potentials. Despite the accuracy in decomposition, there is a large variability in the number of identified MUs across individuals and exerted forces. Here we present a systematic investigation of the anatomical and neural factors that determine this variability.Approach. We investigated factors of influence on HD-sEMG decomposition, such as synchronization of MU discharges, distribution of MU territories, muscle-electrode distance (MED-subcutaneous adipose tissue thickness), maximum anatomical cross-sectional area (ACSAmax), and fiber cross-sectional area. For this purpose, we recorded HD-sEMG signals, ultrasound and magnetic resonance images, and took a muscle biopsy from the biceps brachii muscle from 30 male participants drawn from two groups to ensure variability within the factors-untrained-controls (UT = 14) and strength-trained individuals (ST = 16). Participants performed isometric ramp contractions with elbow flexors (at 15%, 35%, 50% and 70% maximum voluntary torque-MVT). We assessed the correlation between the number of accurately detected MUs by HD-sEMG decomposition and each measured parameter, for each target force level. Multiple regression analysis was then applied.Main results.ST subjects showed lower MED (UT = 5.1 ± 1.4 mm; ST = 3.8 ± 0.8 mm) and a greater number of identified MUs (UT: 21.3 ± 10.2 vs ST: 29.2 ± 11.8 MUs/subject across all force levels). The entire cohort showed a negative correlation between MED and the number of identified MUs at low forces (r= -0.6,p= 0.002 at 15% MVT). Moreover, the number of identified MUs was positively correlated to the distribution of MU territories (r= 0.56,p= 0.01) and ACSAmax(r= 0.48,p= 0.03) at 15% MVT. By accounting for all anatomical parameters, we were able to partly predict the number of decomposed MUs at low but not at high forces.Significance.Our results confirmed the influence of subcutaneous tissue on the quality of HD-sEMG signals and demonstrated that MU spatial distribution and ACSAmaxare also relevant parameters of influence for current decomposition algorithms.

Characterising hyperinsulinemia-induced insulin resistance in human skeletal muscle cells.

Hyperinsulinaemia potentially contributes to insulin resistance in metabolic tissues, such as skeletal muscle. The purpose of these experiments was to characterise glucose uptake, insulin signalling and relevant gene expression in primary human skeletal muscle-derived cells (HMDCs), in response to prolonged insulin exposure (PIE) as a model of hyperinsulinaemia-induced insulin resistance. Differentiated HMDCs from healthy human donors were cultured with or without insulin (100 nM) for 3 days followed by an acute insulin stimulation. HMDCs exposed to PIE were characterised by impaired insulin-stimulated glucose uptake, blunted IRS-1 phosphorylation (Tyr612) and Akt (Ser473) phosphorylation in response to an acute insulin stimulation. Glucose transporter 1 (GLUT1), but not GLUT4, mRNA and protein increased following PIE. The mRNA expression of metabolic (PDK4) and inflammatory markers (TNF-α) was reduced by PIE but did not change lipid (SREBP1 and CD36) or mitochondrial (UCP3) markers. These experiments provide further characterisation of the effects of PIE as a model of hyperinsulinaemia-induced insulin resistance in HMDCs.

Development of a 3D Tissue-Engineered Skeletal Muscle and Bone Co-culture System.

In vitro 3D tissue-engineered (TE) structures have been shown to better represent in vivo tissue morphology and biochemical pathways than monolayer culture, and are less ethically questionable than animal models. However, to create systems with even greater relevance, multiple integrated tissue systems should be recreated in vitro. In the present study, the effects and conditions most suitable for the co-culture of TE skeletal muscle and bone are investigated. High-glucose Dulbecco's modified Eagle medium (HG-DMEM) supplemented with 20% fetal bovine serum followed by HG-DMEM with 2% horse serum is found to enable proliferation of both C2C12 muscle precursor cells and TE85 human osteosarcoma cells, fusion of C2C12s into myotubes, as well as an upregulation of RUNX2/CBFa1 in TE85s. Myotube formation is also evident within indirect contact monolayer cultures. Finally, in 3D co-cultures, TE85 collagen/hydroxyapatite constructs have significantly greater expression of RUNX2/CBFa1 and osteocalcin/BGLAP in the presence of collagen-based C2C12 skeletal muscle constructs; however, fusion within these constructs appears reduced. This work demonstrates the first report of the simultaneous co-culture and differentiation of 3D TE skeletal muscle and bone, and represents a significant step toward a full in vitro 3D musculoskeletal junction model.

The combined effect of sprint interval training and postexercise blood flow restriction on critical power, capillary growth, and mitochondrial proteins in trained cyclists.

Sprint interval training (SIT) combined with postexercise blood flow restriction (BFR) is a novel method to increase maximal oxygen uptake (V̇o2max) in trained individuals and also provides a potent acute stimulus for angiogenesis and mitochondrial biogenesis. The efficacy to enhance endurance performance, however, has yet to be demonstrated. Trained male cyclists ( n = 21) (V̇o2max: 62.8 ± 3.7 ml·min-1·kg-1) undertook 4 wk of SIT (repeated 30-s maximal sprints) either alone (CON; n = 10) or with postexercise BFR ( n = 11). Before and after training V̇o2max, critical power (CP) and curvature constant ( W') were determined and muscle biopsies obtained for determination of skeletal muscle capillarity and mitochondrial protein content. CP increased ( P = 0.001) by a similar extent following CON (287 ± 39 W to 297 ± 43 W) and BFR (296 ± 40 W to 306 ± 36 W). V̇o2max increased following BFR by 5.9% ( P = 0.02) but was unchanged after CON ( P = 0.56). All markers of skeletal muscle capillarity and mitochondrial protein content were unchanged following either training intervention. In conclusion, 4 wk of SIT increased CP; however, this was not enhanced further with BFR. SIT was not sufficient to elicit changes in skeletal muscle capillarity and mitochondrial protein content with or without BFR. However, we further demonstrate the potency of combining BFR with SIT to enhance V̇o2max in trained individuals. NEW & NOTEWORTHY This investigation has demonstrated that 4 wk of sprint interval training (SIT) increased critical power in trained individuals; however, postexercise blood flow restriction (BFR) did not enhance this further. SIT, with or without BFR, did not induce any changes in skeletal muscle capillarity or mitochondrial protein content in our trained population. We do, however, confirm previous findings that SIT combined with BFR is a potent stimulus to enhance maximal oxygen uptake.