RESUMEN
Identification of unstable high-valent iron species in electron transfer reactions of ferrate(VI) (Fe(VI)O4(2-), Fe(VI)) has been an important challenge in advancing the understanding of the oxidative mechanisms of ferrates. This paper presents the first example of distinguishing various phases differing in the valence state of iron in the solid state reduction of Fe(VI) to Fe(III) oxides at 235 °C using hyperfine parameters, isomer shift and hyperfine magnetic field, obtained from nuclear forward scattering of synchrotron radiation (NFS). The NFS technique enables a fast data accumulation resulting in high time resolution of in situ experiments. The results suggest a reaction mechanism, involving Fe(V) and Fe(IV) species, in the thermal decomposition of K2FeO4 to KFeO2. The present study opens up an approach to exploring the unambiguous identification of Fe(VI), Fe(V), Fe(IV), and Fe(III) in electron-transfer reaction mechanisms of ferrates in solid and aqueous phase systems.
Asunto(s)
Hierro/química , Teoría Cuántica , Dispersión de Radiación , Sincrotrones , Transporte de ElectrónRESUMEN
We report the first example of arsenite and arsenate removal from water by incorporation of arsenic into the structure of nanocrystalline iron(III) oxide. Specifically, we show the capability to trap arsenic into the crystal structure of γ-Fe2O3 nanoparticles that are in situ formed during treatment of arsenic-bearing water with ferrate(VI). In water, decomposition of potassium ferrate(VI) yields nanoparticles having core-shell nanoarchitecture with a γ-Fe2O3 core and a γ-FeOOH shell. High-resolution X-ray photoelectron spectroscopy and in-field (57)Fe Mössbauer spectroscopy give unambiguous evidence that a significant portion of arsenic is embedded in the tetrahedral sites of the γ-Fe2O3 spinel structure. Microscopic observations also demonstrate the principal effect of As doping on crystal growth as reflected by considerably reduced average particle size and narrower size distribution of the "in-situ" sample with the embedded arsenic compared to the "ex-situ" sample with arsenic exclusively sorbed on the iron oxide nanoparticle surface. Generally, presented results highlight ferrate(VI) as one of the most promising candidates for advanced technologies of arsenic treatment mainly due to its environmentally friendly character, in situ applicability for treatment of both arsenites and arsenates, and contrary to all known competitive technologies, firmly bound part of arsenic preventing its leaching back to the environment. Moreover, As-containing γ-Fe2O3 nanoparticles are strongly magnetic allowing their separation from the environment by application of an external magnet.
Asunto(s)
Arseniatos/aislamiento & purificación , Arsenitos/aislamiento & purificación , Hierro/química , Nanopartículas de Magnetita/química , Arsénico/química , Cristalografía por Rayos X , Concentración de Iones de Hidrógeno , Cinética , Nanopartículas de Magnetita/ultraestructura , Tamaño de la Partícula , Espectroscopía de Fotoelectrones , Espectroscopía de Mossbauer , TemperaturaRESUMEN
The reaction of potassium ferrate(VI), K(2)FeO(4), with weak-acid dissociable cyanides--namely, K(2)[Zn(CN)(4)], K(2)[Cd(CN)(4)], K(2)[Ni(CN)(4)], and K(3)[Cu(CN)(4)]--results in the formation of iron(III) oxyhydroxide nanoparticles that differ in size, crystal structure, and surface area. During cyanide oxidation and the simultaneous reduction of iron(VI), zinc(II), copper(II), and cadmium(II), metallic ions are almost completely removed from solution due to their coprecipitation with the iron(III) oxyhydroxides including 2-line ferrihydrite, 7-line ferrihydrite, and/or goethite. Based on the results of XRD, Mössbauer and IR spectroscopies, as well as TEM, X-ray photoelectron emission spectroscopy, and Brunauer-Emmett-Teller measurements, we suggest three scavenging mechanisms for the removal of metals including their incorporation into the ferrihydrite crystal structure, the formation of a separate phase, and their adsorption onto the precipitate surface. Zn and Cu are preferentially and almost completely incorporated into the crystal structure of the iron(III) oxyhydroxides; the formation of the Cd-bearing, X-ray amorphous phase, together with Cd carbonate is the principal mechanism of Cd removal. Interestingly, Ni remains predominantly in solution due to the key role of nickel(II) carbonate, which exhibits a solubility product constant several orders of magnitude higher than the carbonates of the other metals. Traces of Ni, identified in the iron(III) precipitate, are exclusively adsorbed onto the large surface area of nanoparticles. We discuss the relationship between the crystal structure of iron(III) oxyhydroxides and the mechanism of metal removal, as well as the linear relationship observed between the rate constant and the surface area of precipitates.
Asunto(s)
Carbonatos/química , Cianuros/química , Compuestos Férricos/química , Compuestos de Hierro/química , Metales/química , Nanopartículas/química , Compuestos de Potasio/química , Cadmio/química , Níquel/química , Zinc/químicaRESUMEN
Nanoscale zero-valent iron (nZVI) particles and a composite containing a mixture of ferrate(VI) and ferrate(III) were prepared by thermal procedures. The phase compositions, valence states of iron, and particle sizes of iron-bearing compounds were determined by combination of X-ray powder diffraction, Mössbauer spectroscopy and scanning electron microscopy. The applicability of these environmentally friendly iron based materials in treatment of chemical warfare agents (CWAs) has been tested with three representative compounds, sulfur mustard (bis(2-chlorethyl) sulfide, HD), soman ((3,3'-imethylbutan-2-yl)-methylphosphonofluoridate, GD), and O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothiolate (VX). Zero-valent iron, even in the nanodimensional state, had a sluggish reactivity with CWAs, which was also observed in low degrees of CWAs degradation. On the contrary, ferrate(VI)/(III) composite exhibited a high reactivity and complete degradations of CWAs were accomplished. Under the studied conditions, the estimated first-order rate constants (≈ 10(-2)s(-1)) with the ferrate(VI)/(III) composite were several orders of magnitude higher than those of spontaneous hydrolysis of CWAs (10(-8)-10(-6)s(-1)). The results demonstrated that the oxidative technology based on application of ferrate(VI) is very promising to decontaminate CWAs.
Asunto(s)
Sustancias para la Guerra Química/química , Hierro/química , Nanopartículas/química , Contaminantes Químicos del Agua/química , Inhibidores de la Colinesterasa/química , Microscopía Electrónica de Rastreo , Gas Mostaza/química , Nanopartículas/ultraestructura , Compuestos Organotiofosforados/química , Oxidación-Reducción , Difracción de Polvo , Soman/química , Purificación del Agua/métodos , Difracción de Rayos XRESUMEN
Superparamagnetic nanoparticles (20-40 nm) of maghemite, γ-Fe(2)O(3), with well-defined stoichiometric structure, are synthesized by the borohydride reduction of ferric chloride at an elevated temperature (100°C) followed by thermal treatment of the reaction product. Prepared maghemite nanoparticles reveal excellent colloidal stability for a long time without the necessity for any additional surface modification. These colloidal features are due to surface stabilizing OH(-) groups, which act as charge barriers preventing a particle aggregation and enabling a reversible binding of various oppositely charged organic substances. Such binding with rhodamine B isothiocyanate results in the fluorescent magnetic nanocarrier providing, at the same time, a spacer arm for covalent immobilization of other biosubstances including enzymes. In this work, we exploit this general applicability of the developed nanocarrier for covalent immobilization of glucose oxidase. This is the first reported example of magnetically drivable fluorescent nanocatalyst. The immobilized enzyme creates a 3-5 nm thick layer on the nanoparticle surface as proved by high-resolution transmission electron microscopy. This layer corresponds to 10 enzyme molecules, which are bound to the nanoparticle surface as found by the fluorimetric determination of flavin adenine dinucleotide. The developed magnetic fluorescent nanocatalyst, showing a rate constant of 32.7s(-1) toward glucose oxidation, can be used as a biosensor in various biochemical, biotechnological, and food chemistry applications. The presence of the nanocatalyst can be simply monitored by its fluorescence; moreover, it can be easily separated from the solution by an external magnetic field and repeatedly used without a loss of catalytic efficiency.