Workers' Compensation patients after total joint arthroplasty: do they return to work?

Clinicians identify patients receiving Workers' Compensation (WC) as unlikely to fully benefit from total joint arthroplasty (TJA), with possibly decreased ability to return to work. We completed follow-up for 164 patients undergoing 177 arthroplasties while receiving WC between 2000 and 2009. Inquiry was made regarding work status, nature of work, and return to work time frame. Patients undergoing primary versus revision TJA returned to work 70.2% versus 43.9%, respectively (p=0.002). The mean time frame for return to work following primary TJA was 16.4 weeks. Manual laborers versus sedentary workers returned to work 67.1% versus 84.8%, respectively (p=0.05). As this group is limited by the strenuous nature of their employment, clinicians should be aware that receiving WC may modestly impact return to work following arthroplasty.

Surgical residency training and international volunteerism: a national survey of residents from 2 surgical specialties.

BACKGROUND: Many low- and middle-income countries (LMICs) lack basic surgical resources, resulting in avoidable disability and mortality. Recently, residents in surgical training programs have shown increasing interest in overseas elective experiences to assist surgical programs in LMICs. The purpose of this study was to survey Canadian surgical residents about their interest in international volunteerism. METHODS: We sent a web-based survey to all general and orthopedic surgery residents enrolled in surgical training programs in Canada. The survey assessed residents' interests, attitudes and motivations, and perceived barriers and aids with respect to international volunteerism. RESULTS: In all, 361 residents completed the survey for a response rate of 38.0%. Half of the respondents indicated that the availability of an international surgery elective would have positively influenced their selection of a residency program. Excluding the 18 residents who had volunteered during residency, 63.8% of the remaining residents confirmed an interest in international volunteering with "contributing to an important cause," "teaching" and "tourism/cultural enhancement" as the leading reasons for their interest. Perceived barriers included "lack of financial support" and "lack of available organized opportunities." All (100%) respondents who had done an international elective during residency confirmed that they would pursue such work in the future. CONCLUSION: Administrators of Canadian surgical programs should be aware of strong resident interest in global health care and accordingly develop opportunities by encouraging faculty mentorships and resources for global health teaching.

Natural history of squeaking after total hip arthroplasty.

BACKGROUND: In recent years, a number of alternative bearing surfaces, such as ceramic on ceramic, are being used in THA. Squeaking after THA is a recently recognized complication; however, its incidence is unknown. QUESTIONS/PURPOSES: Find the incidence of squeaking; when it ensues; activities associated to squeaking; its natural history, and outcome of revisions for squeaking. METHODS: A prospective observational study between 2002 and 2007; yield 1486 ceramic-on-ceramic THA performed at our institution. All patients were followed up by office visits or by phone, to obtain information regarding squeaking, pain and function. Minimum followup was 2.5 years (mean, 5.5 years; range, 2.5-7.9 years). RESULTS: Ninety-five of the 1486 hips (6%) developed squeaking after THA, 39 females (44%) and 49 males (56%) with an average age of 49.9 years. Squeaking began on average 19.7 months after surgery but not associated with pain or functional impairment in any patient. Squeaking could be heard during walking (38%), ascending stairs (24%), bending forward (21%), and other activities (18%), was constant in 26% of the patients and intermittent in 74%. The intensity and frequency remained similar over time in 70% of the patients. CONCLUSIONS: Squeaking is a real phenomenon that occurred in about 6% of our patients. The etiology for this problem remains elusive and is likely to be multifactorial in nature. Squeaking, when developed, does not seem to be self-limited and persists in the majority. Nine patients underwent revision arthroplasty for squeaking. No fractures or other implant-related issues were observed. LEVEL OF EVIDENCE: Level II, prognostic study. See the Guidelines for Authors for a complete description of levels of evidence.

Decolonization of drug-resistant organisms before total joint arthroplasty.

Periprosthetic joint infection is now the leading cause of failure after a total knee arthroplasty, and Staphylococcus aureus, most commonly from the patient's own flora, typically is the infective agent. Several preoperative screening tests have been developed to identify patients who are carrying methicillin-resistant S aureus. Testing and decolonization programs have generally been effective in decreasing the incidence of surgical site infections, but the role of such programs in total joint arthroplasty has not been thoroughly investigated. Although recent studies found a tendency toward fewer methicillin-resistant S aureus infections after total joint arthroplasty when a testing and decolonization program was used, most of these studies were underpowered. Larger, randomized, controlled studies are needed.

Revision hip arthroplasty for ceramic-on-ceramic squeaking hips does not compromise the results.

Squeaking is a complication that may occur after ceramic-on-ceramic total hip arthroplasty (THA) that can be intolerable enough for some patients to seek revision THA. This prospective case series of 11 hips is the first to report on the results of these patients. All patients underwent isolated head and liner exchange to a metal-on-highly cross-linked polyethylene using the direct lateral approach. Mean age was 45.5 years, and body mass index was 30.0 kg/m(2). Hips were revised at an average of 40.1 months postindex THA. Retrieval analysis showed 7 of 7 liners/heads with edge loading wear and 5 of 7 liners with signs of neck-rim impingement. Short Form-36 mental dimension, Western Ontario McMaster Osteoarthritis Index, and Harris Hip Score (HHS) showed a statistically significant improvement (P < .05). All squeaking was eliminated after revision THA. There were no morbidities or complications after the revision surgery rendering isolated head-and-liner exchange to a metal-on-highly cross-linked polyethylene a relatively benign procedure.

Mobile-bearing total knee arthroplasty: better than a fixed-bearing?

The purported advantages of mobile-bearing knee include increased survivorship and restoration of more natural knee kinematics compared to a standard fixed-bearing design. To evaluate these claims, an extensive review of the available literature was undertaken. We compared survivorship and clinical function, including patient preference. We found no difference in survivorship at 12 to 23 years. Kinematic profiles of both designs did not differ significantly: rotation, flexion, and extension were comparable. Studies evaluating both designs in the same patient showed no difference in range of motion, knee preference, knee scores, and survivorship at midterm follow-up. Both designs were capable of producing excellent long-term results and clinical outcomes if properly implanted. The available evidence does not point to the superiority of one design over another in survivorship and clinical function.

Développement de la version franco-canadienne du questionnaire Risk Assessment and Prediction Tool (RAPT) chez une population préhospitalière recourant à une arthroplastie de la hanche ou du genou.

Purpose: The primary purpose is to translate and assess the transcultural validity of the RAPT - a pre-operation questionnaire that helps predict the clients' post-operation process - for the French-Canadian population requiring an arthroplasty of the hip or of the knee. The second purpose is to determine the standard error of measurements of the French-Canadian version of RAPT. Method: The transcultural translation and adaptation process of RAPT follows four steps: (1) initial translation, (2) retro-translation, (3) assessment of the questionnaire's clarity by patients, 4) assessment of the translation's transcultural validity. Furthermore, the RAPT standard error of measurements was calculated. Results: Participants were recruited at the Hull and Montfort hospitals. Twenty participants were recruited for step 3 and 83 participants for step 4. Results suggest that the RAPT and the French-Canadian translation (RAPT-FC) are comparable, with intraclass, intralanguage, interlanguage and temportal interlanguage correlation coefficents that varied from 0.858 to 0.988. The standard error of measurements is 0.8. Conclusions: The RAPT-FC tool is comparable to the original English version of the RAPT. Using this questionnaire could help in the planning of postoperative resources associated to hip and knee replacements within the French-Canadian population.

Development of the French-Canadian Version of the Self-Administered Comorbidities Questionnaire (SCQ) in a hospital population undergoing hip or knee arthroplasty.

The Self-Administered Comorbidity Questionnaire (SCQ) is a tool used by hospitalized patients to self-report their comorbidities. It can help to explain the effectiveness of hip or knee arthroplasty, its complications, the length of hospital stay and perioperative resource utilization. HYPOTHESIS: The French-Canadian version of the SCQ will be suitable for use in a Canadian hospital population. OBJECTIVES: (1) translate and evaluate the transcultural validity of the SCQ in a French Canadian population undergoing hip or knee arthroplasty; (2) determine the standard error of measurement (SEM) in the French Canadian version. MATERIALS AND METHODS: The translation and transcultural adaptation process consisted of four steps: (1) initial translation; (2) back translation; (3) assessment of questionnaire clarity with patients; (4) assessment of the translation's transcultural validity. The SEM was also calculated. RESULTS: Twenty participants were recruited for step 3 and 83 participants for step 4. The original English version of the SCQ and the translated French-Canadian version (SCQ-FC) were similar with intra-class correlation coefficients for the intra-language and inter-language agreement between 0.71 and 0.97. The SEM was 1.92. CONCLUSION: The SCQ-FC is comparable to the original English language version. Using this questionnaire allows us to document the comorbidities present in patients undergoing hip and knee arthroplasty in a French-Canadian population, and the impact of these comorbidities on the patients' health. LEVEL OF EVIDENCE: V, Prospective study.

Bone scintigraphy in femoroacetabular impingement: a preliminary report.

Femoroacetabular impingement (FAI) has recently been recognized as a cause of hip pain, labral tears, and cartilage damage in young adults. We determined the sensitivity and specificity of bone scans in diagnosing FAI and describe its findings on nuclear imaging. We prospectively followed 25 patients with hip pain (four bilateral) of greater than 6 months' duration and a positive impingement sign (IS). All patients had plain radiographs and a three-phase bone scan followed by single-photon emission computed topographic (SPECT) images of both hips. We presumed patients had FAI if they had all three of the following findings: hip pain, positive IS, and diagnostic radiographs. Forty-six of the 50 hips had bony abnormalities on radiographs and 26 hips were diagnosed with FAI according to our criteria. Twenty-two of these 26 hips showed an increased uptake on SPECT representing true-positives. There were four false-positives, nine false-negatives, and 15 true-negatives. Sensitivity of bone SPECT was 84.7%, specificity 62.5%, positive predictive value 71%, and negative predictive value 78.9%. Focal uptake was localized to the superolateral acetabular rim and/or anterolateral femoral head-neck junction consistent with the reported intra-articular cartilage hip damage seen in FAI.

2008 Otto Aufranc Award: component design and technique affect cement penetration in hip resurfacing.

Either excessive or insufficient cement penetration within the femoral head after hip resurfacing influences the risk of femoral failures. However, the factors controlling cement penetration are not yet fully understood. We determined the effect of femoral component design and cementation technique on cement penetration. Six retrieved femoral heads were resurfaced for each implant (BHR, ASR, Conserve Plus, DuROM, ReCAP) using the manufacturers' recommendations for implantation. In addition, the BHR was implanted using the Conserve Plus high-viscosity cementation technique, "BHR/hvt," and vice versa for the Conserve, "Conserve/lvt." The average cement penetration was highest with BHR (65.62% +/- 15.16%) compared with ASR (12.25% +/- 5.12%), Conserve Plus(R) (19.43% +/- 5.28%), DuROM (17.73% +/- 3.96%), and ReCAP (26.09% +/- 5.20%). Cement penetration in BHR/hvt remained higher than all other implants equaling 36.7% +/- 6.6%. Greater femoral component design clearance correlated with cement mantle thickness. Femoral component design in hip resurfacing plays a major role in cement penetration.

Surgical site infection risk factors and risk stratification.

Preoperative identification of the risk factors for surgical site infection and patient risk stratification are essential for deciding whether surgery is appropriate, educating patients on their individual risk of complications, and managing postoperative expectations. Early identification of these factors is also necessary to help guide both patient medical optimization and perioperative care planning. Several resources are currently available to track and analyze healthcare-associated infections, including the Centers for Disease Control and Prevention's National Healthcare Safety Network. In addition, the Centers for Disease Control and Prevention and the American Academy of Orthopaedic Surgeons are exploring collaborative opportunities for the codevelopment of a hip and/or knee arthroplasty national quality measure for periprosthetic joint infection.

Assessing patellar tracking during total knee arthroplasty: a technical note.

Achieving proper patellar tracking is one of the most important goals of total knee arthroplasty, as postoperative patellar complications are common. Patellar tracking is influenced by several factors, including component positioning and tightness of the lateral retinaculum. Various techniques such as the no thumb and towel clip tests have been described to assess adequacy of intraoperative patellar tracking. We propose a novel technique, the vertical patella test, which is a simple and reliable technique to assess the tightness of the lateral retinaculum. This method should be used in addition to the currently used techniques and needs to be validated in a prospective comparative study.

Total joint arthroplasty in patients with a history of cancer.

In this review, we describe the pertinent issues that reconstructive surgeons face when treating patients with cancer. These issues include the various cancer management options and their influence on total joint arthroplasty outcomes, as well as prosthesis types and fixation types. We also present a strategy for reducing morbidity and complications during the perioperative period.

Total joint arthroplasty in patients with hepatitis C.

BACKGROUND: Hepatitis C is present worldwide. Little is known about the outcome of joint arthroplasty in asymptomatic patients with hepatitis C. We evaluated the surgical complications following hip and knee arthroplasty in patients who were seropositive for hepatitis C in a matched study. METHODS: Seventy-one patients with hepatitis C underwent forty total hip arthroplasties and thirty-two total knee arthroplasties from 1995 to 2006. The patients had normal preoperative liver function tests. Patients with human immunodeficiency virus infection, hepatitis B, and hemophilia were excluded. A control group was matched in a 2:1 ratio with the hepatitis-C group for age, body-mass index, sex, year of surgery, and medical comorbidities, including diabetes, rheumatoid arthritis, and immunosuppressive conditions. RESULTS: In the group of patients with hepatitis C who were managed with total hip arthroplasty, six patients (15%) had wound complications requiring oral antibiotics or wound irrigation and debridement and four hips (10%) had mechanical complications, including implant loosening or dislocation. In the control group, three patients (3.8%) had wound complications requiring oral antibiotics or irrigation and debridement and three patients (3.8%) had mechanical complications, including dislocation, periprosthetic femoral fracture, and implant failure. In the group of patients with hepatitis C who underwent total knee arthroplasty, three patients (9.4%) had mechanical complications, including loosening and periprosthetic fracture requiring revision. In the control group, three patients (4.7%) had wound complications, one (1.6%) had a deep infection requiring two-stage revision, and one (1.6%) underwent revision because of a mechanical problem. The combined hepatitis-C group had significantly longer hospital stays and higher rates of surgical and mechanical complications, reoperation, and revision. CONCLUSIONS: Patients with hepatitis C undergoing joint arthroplasty had a higher rate of surgical complications and a longer hospital stay. The reason for the higher rate of complications in this group of patients is unknown, and further investigation is needed. Patients with hepatitis C should be counseled about the potential for a higher incidence of postoperative complications prior to undergoing joint arthroplasty.

Open wedge high tibial osteotomy: a roentgenographic comparison of a horizontal and an oblique osteotomy on patellar height and sagittal tibial slope.

BACKGROUND: In patients with unicompartmental medial knee arthritis, medial opening wedge high tibial osteotomy is used to shift the mechanical weightbearing line laterally to reduce pain and improve function. There have been concerns that opening wedge high tibial osteotomy is associated with a reduction of patellar height and increase in the sagittal posterior tibial slope, both of which can adversely affect the final result. HYPOTHESIS: A more distal oblique osteotomy at the level of insertion of the patellar tendon should decrease these effects when compared with a horizontal osteotomy made proximal to the patellar tendon insertion. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: Review of 22 horizontal and 19 oblique high tibial osteotomies with a mean follow-up of 4.2 +/- 1.8 years (mean +/- SD) was performed. Anatomic tibiofemoral angle, mechanical weightbearing line, medial coronal tibial plateau angle, patellar height (Blackburne and Peel ratio), and sagittal tibial slope were measured. RESULTS: In both groups, the weightbearing line was equally shifted toward the center of the plateau. In the horizontal group, the Blackburne and Peel ratio decreased from 0.85 +/- 0.16 to 0.67 +/- 0.12, and the sagittal tibial slope was increased from 7.7 degrees +/- 4.6 degrees to 10.7 degrees +/- 3.8 degrees (P < .001). In comparison, the oblique group did not show any significant postoperative changes for these 2 parameters. In the oblique group, 2 patients sustained loss of correction and early failure when the osteotomy remained below the metaphyseal flare on the lateral cortex. CONCLUSION: The oblique osteotomy group showed more normalized postoperative sagittal tibial slope and patellar height. Caution should be exercised not to osteotomize too distally.