Employing Nanostructured Scaffolds to Investigate the Mechanical Properties of Adult Mammalian Retinae Under Tension.

Numerous eye diseases are linked to biomechanical dysfunction of the retina. However, the underlying forces are almost impossible to quantify experimentally. Here, we show how biomechanical properties of adult neuronal tissues such as porcine retinae can be investigated under tension in a home-built tissue stretcher composed of nanostructured TiO2 scaffolds coupled to a self-designed force sensor. The employed TiO2 nanotube scaffolds allow for organotypic long-term preservation of adult tissues ex vivo and support strong tissue adhesion without the application of glues, a prerequisite for tissue investigations under tension. In combination with finite element calculations we found that the deformation behavior is highly dependent on the displacement rate which results in Young's moduli of (760-1270) Pa. Image analysis revealed that the elastic regime is characterized by a reversible shear deformation of retinal layers. For larger deformations, tissue destruction and sliding of retinal layers occurred with an equilibration between slip and stick at the interface of ruptured layers, resulting in a constant force during stretching. Since our study demonstrates how porcine eyes collected from slaughterhouses can be employed for ex vivo experiments, our study also offers new perspectives to investigate tissue biomechanics without excessive animal experiments.

Regeneration of TiO2 Nanotube Arrays after Long-Term Cell and Tissue Culture for Multiple Use - an Environmental Scanning Electron Microscopy (ESEM) Survey of Adult Pig Retina and beyond.

Long-term organotypic culture of adult tissues not only open up possibilities for studying complex structures of explants in vitro, but also can be employed e.g. to investigate pathological changes, their fingerprints on tissue mechanics, as well as the effectiveness of drugs. While conventional culture methods do not allow for survival times of more than a few days, we have demonstrated recently that TiO2 nanotube arrays allow to maintain integrity of numerous tissues, including retina, brain, spline and tonsils, for as long as 2 weeks in vitro. A mystery in culturing has been the interaction of tissue with these substrates, which is also reflected by tissue debris after liftoff. As the latter reveals fingerprints of tissue adhesion and impedes with nanotube array reuse, we address within the present environmental scanning electron study debris nature and the effectiveness of cleaning approaches of distinct physical and chemical methods, including UV-light irradiation, O2 plasma treatment and application of an enzyme-based buffer. This will lays the foundation for large-scale regeneration and reuse of nanotube arrays in science and clinical research.

Endothelialization of Titanium Surfaces by Bioinspired Cell Adhesion Peptide Coatings.

Common interventional therapies for cardiovascular occlusive diseases, such as the implantation of stents, are at risk of complications like thrombosis or restenosis. Drug-eluting stents have improved patency but simultaneously worsen the endothelialization of the implant. Here, we present a novel peptide coating derived from three proteins of the extracellular matrix named fibronectin, laminin, and elastin. Their active sequences RGD, SIKVAV, and VGVAPG were immobilized onto titanium surfaces by a carrier peptide containing l-3,4-dihydroxyphenylalanine (DOPA). Simultaneous functionalization of the carrier peptide with cyclic c[RGDfK] and SIKVAV had the most potent influence on adhesion, proliferation, viability, and angiogenesis of endothelial cells. By presentation of two adhesion peptides in one molecule, a synergistic enhancement of cell-surface interactions was achieved. Overall, this work clearly demonstrates the advantages of spatially defined peptide coatings for the endothelialization of titanium and thus describes a promising approach for the coating of stents.

Magnetically responsive composites: electron beam assisted magnetic nanoparticle arrest in gelatin hydrogels for bioactuation.

As emerging responsive materials, ferrogels have become highly attractive for biomedical and technical applications in terms of soft actuation, tissue engineering or controlled drug release. In the present study, bioderived ferrogels were fabricated and successfully deformed within moderate, heterogeneous magnetic fields. Synthesis was realized by arresting iron oxide nanoparticles in porcine gelatin by introduction of covalent crosslinks via treatment with energetic electrons for mesh refinement. This approach also allows for tuning thermal and mechanical stability of the gelatin matrix. Operating the bioferrogel in compression, magnetic forces on the nanoparticles are counterbalanced by the stiffness of the hydrogel matrix that is governed by a shift in thermodynamic equilibrium of swelling, as derived in the framework of osmosis. As gelatin and iron oxide nanoparticles are established as biocompatible constituents, these findings promise potential for in vivo use as contactless mechanical transducers.

Nanoporous amorphous Ge-Si alloys - unraveling the physics behind ion beam induced morphogenesis.

Despite a high technical relevance and 35 years of observation, self-organized morphogenesis of nanoporous sponge-like amorphous structures during exposure of selected covalent materials to energetic ions is still insufficiently understood. Due to the presence and absence of these effects in amorphous Ge and Si, respectively, the Ge-Si alloy system constitutes an ideal testbed to track down the underlying physics at the atomic scale. This is realized within the present study by a combination of tailored experiments and extensive molecular dynamics computer modeling. The swelling capabilities of a variety of interaction potentials for the Ge-Si system and its elemental constituents are scrutinized with respect to the experimental observations and related to relevant physical properties of the model systems. This allows to identify defect kinetics in combination with a moderate radiation induced fluidity as key ingredients for nanopore morphogenesis. Cast in a simple quantitative model, it enables to account for both experimental as well as computational results, thus paving the way for a design by understanding approach in synthesis.

Influence of high energy electron irradiation on the network structure of gelatin hydrogels as investigated by small-angle X-ray scattering (SAXS).

The impact of high energy crosslinking on the network structure of gelatin hydrogels was investigated in comparison to physically entangled gels by small-angle X-ray scattering (SAXS). Physically entangled gelatin of increasing concentration exhibited a nearly constant correlation length of several nanometers. These gels had scattering behavior close to that of polymer coils swollen in a good solvent, as evidenced by the Porod exponent of 1.8. The mass fractal dimension decreased towards 1, indicating increased formation of semiflexible gelatin triple helices and rod-like structures as a function of the gelatin concentration. In contrast, electron irradiation lead to a decrease in the correlation length at doses above 20 kGy. Covalent crosslinking induced by electron irradiation lead to increased branching and formation of globular structures, as observed by a steady increase of both the Porod exponent and mass fractal dimension. Furthermore, the network mesh size systematically decreased from approximately 45 nm to under 20 nm with both additional physical and chemical crosslinking. These mesh sizes as obtained by SAXS were used to estimate the network shear modulus using several polymer models and were compared to macroscopic rheology measurements. Finally, SEM images of freeze-dried samples revealed changes in the microstructure of the irradiated hydrogels. Overall, fundamental differences in the network structures stemming from the crosslinking method were observed across a wide range of length scales.

Magnetic response of gelatin ferrogels across the sol-gel transition: the influence of high energy crosslinking on thermal stability.

As emerging responsive materials, ferrogels have demonstrated significant potential for applications in areas of engineering to regenerative medicine. Promising techniques to study the behavior of magnetic nanoparticles (MNPs) in such matrices include magnetic particle spectroscopy (MPS) and magnetorelaxometry (MRX). This work investigated the magnetic response of gelatin-based ferrogels with increasing temperatures, before and after high energy crosslinking. The particle response was characterized by the nonlinear magnetization using MPS and quasistatic magnetization measurements as well as MRX to discriminate between Néel and Brownian relaxation mechanisms. The effective magnetic response of MNPs in gelatin was suppressed, indicating that the magnetization of the ferrogels was strongly influenced by competing dipole-dipole interactions. Significant changes in the magnetic behavior were observed across the gelatin sol-gel transition, as influenced by the matrix viscosity. These relaxation processes were modeled by Fourier transformation of the Langevin function, combined with a Debye term for the nonlinear magnetic response, for single core MNPs embedded in matrices of changing viscosities. Using high energy electron irradiation as a crosslinking method, modified ferrogels exhibited thermal stability on a range of timescales. However, MRX relaxation times revealed a slight softening around the gelatin sol-gel transition felt by the smallest particles, demonstrating a high sensitivity to observe local changes in the viscoelasticity. Overall, MPS and MRX functioned as non-contact methods to observe changes in the nanorheology around the native sol-gel transition and in crosslinked ferrogels, as well as provided an understanding of how MNPs were integrated into and influenced by the surrounding matrix.

Mechanical spectroscopy of retina explants at the protein level employing nanostructured scaffolds.

Development of neuronal tissue, such as folding of the brain, and formation of the fovea centralis in the human retina are intimately connected with the mechanical properties of the underlying cells and the extracellular matrix. In particular for neuronal tissue as complex as the vertebrate retina, mechanical properties are still a matter of debate due to their relation to numerous diseases as well as surgery, where the tension of the retina can result in tissue detachment during cutting. However, measuring the elasticity of adult retina wholemounts is difficult and until now only the mechanical properties at the surface have been characterized with micrometer resolution. Many processes, however, such as pathological changes prone to cause tissue rupture and detachment, respectively, are reflected in variations of retina elasticity at smaller length scales at the protein level. In the present work we demonstrate that freely oscillating cantilevers composed of nanostructured TiO2 scaffolds can be employed to study the frequency-dependent mechanical response of adult mammalian retina explants at the nanoscale. Constituting highly versatile scaffolds with strong tissue attachment for long-term organotypic culture atop, these scaffolds perform damped vibrations as fingerprints of the mechanical tissue properties that are derived using finite element calculations. Since the tissue adheres to the nanostructures via constitutive proteins on the photoreceptor side of the retina, the latter are stretched and compressed during vibration of the underlying scaffold. Probing mechanical response of individual proteins within the tissue, the proposed mechanical spectroscopy approach opens the way for studying tissue mechanics, diseases and the effect of drugs at the protein level.

Electron Beam-Modified Collagen Type I Fibers: Synthesis and Characterization of Mechanical Response.

Ten MeV electron beam treatment facilitates a biomimetic introduction of cross-links in collagenous biopolymer systems, modifying their viscoelastic properties, mechanical stability, and swelling behavior. For reconstituted collagen type I fibers, electron-induced cross-linking opens up new perspectives regarding future biomedical applications in terms of tissue and ligament engineering. We demonstrate how electron irradiation affects stiffness both in low-strain regimes and in postyield regimes of biocompatible reconstituted rat tail collagen type I fibers. Stress-strain tests show a dose-dependent increase in modulus in the nonlinear elastic response, indicating a central role of induced cross-links in mechanical stability. Environmental scanning electron microscopy after fiber rupture reveals aligned distributed collagen fibril domains under the fiber surface for as-prepared fibers, accompanied by a ductile fracture behavior, whereas, in tensile tests imaged by light microscopy after 10 MeV electron treatment, isotropic network topologies are observed until the occurrence of a brittle type of rupture. Based on the biomimicry of the process, these findings might pave the way for a novel type of synthesis of tailored tendon or ligament substitutes.

Pattern transfer during deposition and fixation of oligomeric bisphenol A on pre-structured copper surfaces.

Pattern transfer during deposition of oligomeric bisphenol A (OBA) on pre-structured Cu surfaces is investigated by means of a combined experimental-computational approach. Aiming for quantitative prediction of experiments, as characterized by atomic force microscopy (AFM), we explore the capabilities of stochastic rate equations to quantitatively account for the spatio-temporal evolution of surface topography. While surface diffusion and deposition noise constitute the main mechanisms, pattern transfer is affected by the inclusion of retardation in the interface potential, which appears to be necessary beyond a critical initial surface slope. In addition, routes for successful surface fixation by cross-linking are also demonstrated, which may pave the way for further technological use.

Nanoscale magneto-structural coupling in as-deposited and freestanding single-crystalline Fe7Pd3 ferromagnetic shape memory alloy thin films.

Ferromagnetic shape memory alloys are characterized by strong magneto-mechanical coupling occurring at the atomic scale causing large magnetically inducible strains at the macroscopic level. Employing combined atomic and magnetic force microscopy studies at variable temperature, we systematically explore the relation between the magnetic domain pattern and the underlying structure for as-deposited and freestanding single-crystalline Fe7Pd3 thin films across the martensite-austenite transition. We find experimental evidence that magnetic domain appearance is strongly affected by the presence and absence of nanotwinning. While the martensite-austenite transition upon temperature variation of as-deposited films is clearly reflected in topography by the presence and absence of a characteristic surface corrugation pattern, the magnetic domain pattern is hardly affected. These findings are discussed considering the impact of significant thermal stresses arising in the austenite phase. Freestanding martensitic films reveal a hierarchical structure of micro- and nanotwinning. The associated domain organization appears more complex, since the dominance of magnetic energy contributors alters within this length scale regime.

Rapid prototyping of microfluidic chips enabling controlled biotechnology applications in microspace.

Rapid prototyping of microfluidic chips is a key enabler for controlled biotechnology applications in microspaces, as it allows for the efficient design and production of microfluidic systems. With rapid prototyping, researchers and engineers can quickly create and test new microfluidic chip designs, which can then be optimized for specific applications in biotechnology. One of the key advantages of microfluidic chips for biotechnology is the ability to manipulate and control biological samples in a microspace, which enables precise and controlled experiments under well-defined conditions. This is particularly useful for applications such as cell culture, drug discovery, and diagnostic assays, where precise control over the biological environment is crucial for obtaining accurate results. Established methods, for example, soft lithography, 3D printing, injection molding, as well as other recently highlighted innovative approaches, will be compared and challenges as well as limitations will be discussed. It will be shown that rapid prototyping of microfluidic chips enables the use of advanced materials and technologies, such as smart materials and digital sensors, which can further enhance the capabilities of microfluidic systems for biotechnology applications. Overall, rapid prototyping of microfluidic chips is an important enabling technology for controlled biotechnology applications in microspaces, as well as for upscaling it into macroscopic bioreactors, and its continued development and improvement will play a critical role in advancing the field. The review will highlight recent trends in terms of materials and competing approaches and shed light on current challenges on the way toward integrated microtechnologies. Also, the possibility to easy and direct implementation of novel functions (membranes, functionalization of interfaces, etc.) is discussed.

Energetic Electron-Assisted Synthesis of Tailored Magnetite (Fe3O4) and Maghemite (γ-Fe2O3) Nanoparticles: Structure and Magnetic Properties.

Iron oxide nanoparticles with a mean size of approximately 5 nm were synthesized by irradiating micro-emulsions containing iron salts with energetic electrons. The properties of the nanoparticles were investigated using scanning electron microscopy, high-resolution transmission electron microscopy, selective area diffraction and vibrating sample magnetometry. It was found that formation of superparamagnetic nanoparticles begins at a dose of 50 kGy, though these particles show low crystallinity, and a higher portion is amorphous. With increasing doses, an increasing crystallinity and yield could be observed, which is reflected in an increasing saturation magnetization. The blocking temperature and effective anisotropy constant were determined via zero-field cooling and field cooling measurements. The particles tend to form clusters with a size of 34 nm to 73 nm. Magnetite/maghemite nanoparticles could be identified via selective area electron diffraction patterns. Additionally, goethite nanowires could be observed.

Laminin Adsorption and Adhesion of Neurons and Glial Cells on Carbon Implanted Titania Nanotube Scaffolds for Neural Implant Applications.

Interfacing neurons persistently to conductive matter constitutes one of the key challenges when designing brain-machine interfaces such as neuroelectrodes or retinal implants. Novel materials approaches that prevent occurrence of loss of long-term adhesion, rejection reactions, and glial scarring are highly desirable. Ion doped titania nanotube scaffolds are a promising material to fulfill all these requirements while revealing sufficient electrical conductivity, and are scrutinized in the present study regarding their neuron-material interface. Adsorption of laminin, an essential extracellular matrix protein of the brain, is comprehensively analyzed. The implantation-dependent decline in laminin adsorption is revealed by employing surface characteristics such as nanotube diameter, ζ-potential, and surface free energy. Moreover, the viability of U87-MG glial cells and SH-SY5Y neurons after one and four days are investigated, as well as the material's cytotoxicity. The higher conductivity related to carbon implantation does not affect the viability of neurons, although it impedes glial cell proliferation. This gives rise to novel titania nanotube based implant materials with long-term stability, and could reduce undesirable glial scarring.

Structural Breakdown of Collagen Type I Elastin Blend Polymerization.

Biopolymer blends are advantageous materials with novel properties that may show performances way beyond their individual constituents. Collagen elastin hybrid gels are a new representative of such materials as they employ elastin's thermo switching behavior in the physiological temperature regime. Although recent studies highlight the potential applications of such systems, little is known about the interaction of collagen and elastin fibers during polymerization. In fact, the final network structure is predetermined in the early and mostly arbitrary association of the fibers. We investigated type I collagen polymerized with bovine neck ligament elastin with up to 33.3 weight percent elastin and showed, by using a plate reader, zeta potential and laser scanning microscopy (LSM) experiments, that elastin fibers bind in a lateral manner to collagen fibers. Our plate reader experiments revealed an elastin concentration-dependent increase in the polymerization rate, although the rate increase was greatest at intermediate elastin concentrations. As elastin does not significantly change the structural metrics pore size, fiber thickness or 2D anisotropy of the final gel, we are confident to conclude that elastin is incorporated homogeneously into the collagen fibers.

From Strain Stiffening to Softening-Rheological Characterization of Keratins 8 and 18 Networks Crosslinked via Electron Irradiation.

Networks of crosslinked keratin filaments are abundant in epithelial cells and tissues, providing resilience against mechanical forces and ensuring cellular integrity. Although studies of in vitro models of reconstituted keratin networks have revealed important mechanical aspects, the mechanical properties of crosslinked keratin structures remain poorly understood. Here, we exploited the power of electron beam irradiation (EBI) to crosslink in vitro networks of soft epithelial keratins 8 and 18 (k8-k18) filaments with different irradiation doses (30 kGy, 50 kGy, 80 kGy, 100 kGy, and 150 kGy). We combined bulk shear rheology with confocal microscopy to investigate the impact of crosslinking on the mechanical and structural properties of the resultant keratin gels. We found that irradiated keratin gels display higher linear elastic modulus than the unirradiated, entangled networks at all doses tested. However, at the high doses (80 kGy, 100 kGy, and 150 kGy), we observed a remarkable drop in the elastic modulus compared to 50 kGy. Intriguingly, the irradiation drastically changed the behavior for large, nonlinear deformations. While untreated keratin networks displayed a strong strain stiffening, increasing irradiation doses shifted the system to a strain softening behavior. In agreement with the rheological behavior in the linear regime, the confocal microscopy images revealed fully isotropic networks with high percolation in 30 kGy and 50 kGy-treated keratin samples, while irradiation with 100 kGy induced the formation of thick bundles and clusters. Our results demonstrate the impact of permanent crosslinking on k8-k18 mechanics and provide new insights into the potential contribution of intracellular covalent crosslinking to the loss of mechanical resilience in some human keratin diseases. These insights will also provide inspiration for the synthesis of new keratin-based biomaterials.

Biomimetic crosslinking of collagen gels by energetic electrons: The role of L-lysine.

Energetic electrons have recently evolved as a powerful tool for crosslinking bio-derived hydrogels without the need for adding potentially hazardous reagents. Application of this approach allows for synthesis of biomimetic collagen-derived networks of highly tunable properties and functionalization. Yet, the underlying reaction kinetics are still not sufficiently established at this point. While hydroxyl radicals are generated by energetic electron-induced hydrolysis of water and play a key role in introducing covalent bonds between network fibers, a detailed mechanistic understanding would significantly increase applicability. We present a comprehensive analysis of central aspects of the reactivity between the hydroxyl radical (•OH) and collagen, elastin, glycine (Gly) and l-lysine (Lys). Pulse radiolysis (PR), solid state nuclear magnetic resonance (NMR), ultraviolet-visible absorption spectroscopy (UV/VIS) and electron spray ionization mass spectrometry (ESI-MS) shine light on distinct features of the crosslinking process. These highlight retained protein backbone integrity in collagen and elastin whilst Lys's ability to form several imine bonded Lys-Lys-species suggests striking similarities to crosslinking via lysyl oxidase catalysis in vivo. Thus, energetic electron based crosslinking opens the venue for customized hybrid gels of outstanding biomimicry and -compatibility. STATEMENT OF SIGNIFICANCE: Energetic electron beam treatment constitutes a highly attractive approach to establish chemical bonds between (bio) molecules. Although a convincing number of publications showed the versatility regarding crosslinking of bioderived hydrogels, insights into the underlying chemistry are still unestablished at this point. The present work unravels the mechanistics of energetic electron induced processes in collagen and elastin hydrogels as well as several abundant amino acids in aqueous solution. As key finding we demonstrate, that i) the connection between polymer chains is dominated by amino acid side chain interaction and ii) two single l-lysine molecules form an imine bond between the terminal amino group of one molecule and the delta carbon of the second molecule. We also consider the formation of H-bonds as a second crosslinking pathway. These findings open up for advanced, optionally spatially resolved biomaterials design.

Electron beam treated injectable agarose/alginate beads prepared by electrospraying.

Granular hydrogels have evolved into an innovative technology for biomedicine. Unlike conventional hydrogels, granular hydrogels display dynamic properties like injectability and porosity, making them feasible for applications in 3D bioprinting and tissue engineering. High-energy electron irradiation combines sterilization and tuning of hydrogel properties without adding potentially cytotoxic chemicals. In this study, granular agarose/alginate hydrogels are prepared by electrospraying. Utilizing 10 MeV electron irradiation, the granular hydrogels are treated in a dose range of 0 kGy-30 kGy relevant for sterilization. Herein, a size reduction of the microparticles is observed. Mechanical properties of individual agarose/alginate beads are examined using AFM measurements revealing a gel softening attributed to radiation induced chain scission. Shear-thinning and self-healing characteristics of the entire granular hydrogel are studied employing rheology. Although viscoelasticity changes under irradiation, shear-thinning and self-healing prevails. These dynamic properties enable injection, which is demonstrated for 27 G needles. This study presents a mechanical characterization of high-energy electron irradiated granular agarose/alginate hydrogels that extends the diversity of available injectable hydrogels and provides a basis for biomedical applications of this scaffold.

A study on the material properties of novel PEGDA/gelatin hybrid hydrogels polymerized by electron beam irradiation.

Gelatin-based hydrogels are highly desirable biomaterials for use in wound dressing, drug delivery, and extracellular matrix components due to their biocompatibility and biodegradability. However, insufficient and uncontrollable mechanical properties and degradation are the major obstacles to their application in medical materials. Herein, we present a simple but efficient strategy for a novel hydrogel by incorporating the synthetic hydrogel monomer polyethylene glycol diacrylate (PEGDA, offering high mechanical stability) into a biological hydrogel compound (gelatin) to provide stable mechanical properties and biocompatibility at the resulting hybrid hydrogel. In the present work, PEGDA/gelatin hybrid hydrogels were prepared by electron irradiation as a reagent-free crosslinking technology and without using chemical crosslinkers, which carry the risk of releasing toxic byproducts into the material. The viscoelasticity, swelling behavior, thermal stability, and molecular structure of synthesized hybrid hydrogels of different compound ratios and irradiation doses were investigated. Compared with the pure gelatin hydrogel, 21/9 wt./wt. % PEGDA/gelatin hydrogels at 6 kGy exhibited approximately up to 1078% higher storage modulus than a pure gelatin hydrogel, and furthermore, it turned out that the mechanical stability increased with increasing irradiation dose. The chemical structure of the hybrid hydrogels was analyzed by Fourier-transform infrared (FTIR) spectroscopy, and it was confirmed that both compounds, PEGDA and gelatin, were equally present. Scanning electron microscopy images of the samples showed fracture patterns that confirmed the findings of viscoelasticity increasing with gelatin concentration. Infrared microspectroscopy images showed that gelatin and PEGDA polymer fractions were homogeneously mixed and a uniform hybrid material was obtained after electron beam synthesis. In short, this study demonstrates that both the presence of PEGDA improved the material properties of PEGDA/gelatin hybrid hydrogels and the resulting properties are fine-tuned by varying the irradiation dose and PEGDA/gelatin concentration.

Carbon and Neon Ion Bombardment Induced Smoothing and Surface Relaxation of Titania Nanotubes.

Titania nanotube arrays with their enormous surface area are the subject of much attention in diverse fields of research. In the present work, we show that not only 60 keV and 150 keV ion bombardment of amorphous titania nanotube arrays yields defect creation within the tube walls, but it also changes the surface morphology: the surface relaxes and smoothens in accordance with a curvature-driven surface material's transport mechanism, which is mediated by radiation-induced viscous flow or radiation-enhanced surface diffusion, while the nanotubes act as additional sinks for the particle surface currents. These effects occur independently of the ion species: both carbon and neon ion bombardments result in comparable surface relaxation responses initiated by an ion energy of 60 keV at a fluence of 1 × 1016 ions/cm2. Using atomic force microscopy and contact angle measurements, we thoroughly study the relaxation effects on the surface topography and surface free energy, respectively. Moreover, surface relaxation is accompanied by further amorphization in surface-near regions and a reduction in the mass density, as demonstrated by Raman spectroscopy and X-ray reflectivity. Since ion bombardment can be performed on global and local scales, it constitutes a versatile tool to achieve well-defined and tunable topographies and distinct surface characteristics. Hence, different types of nanotube arrays can be modified for various applications.