RESUMEN
BACKGROUND: Environmental surveillance (ES) for Salmonella Typhi potentially offers a low-cost tool to identify communities with a high burden of typhoid fever. METHODS: We developed standardized protocols for typhoid ES, including sampling site selection, validation, characterization; grab or trap sample collection, concentration; and quantitative PCR targeting Salmonella genes (ttr, staG, and tviB) and a marker of human fecal contamination (HF183). ES was implemented over 12 months in a historically high typhoid fever incidence setting (Vellore, India) and a lower incidence setting (Blantyre, Malawi) during 2021-2022. RESULTS: S. Typhi prevalence in ES samples was higher in Vellore compared with Blantyre; 39/520 (7.5%; 95% confidence interval [CI], 4.4%-12.4%) vs 11/533 (2.1%; 95% CI, 1.1%-4.0%) in grab and 79/517 (15.3%; 95% CI, 9.8%-23.0%) vs 23/594 (3.9%; 95% CI, 1.9%-7.9%) in trap samples. Detection was clustered by ES site and correlated with site catchment population in Vellore but not Blantyre. Incidence of culture-confirmed typhoid in local hospitals was low during the study and zero some months in Vellore despite S. Typhi detection in ES. CONCLUSIONS: ES describes the prevalence and distribution of S. Typhi even in the absence of typhoid cases and could inform vaccine introduction. Expanded implementation and comparison with clinical and serological surveillance will further establish its public health utility.
Asunto(s)
Fiebre Tifoidea , Vacunas Tifoides-Paratifoides , Humanos , Fiebre Tifoidea/epidemiología , Fiebre Tifoidea/prevención & control , Salmonella typhi/genética , Malaui/epidemiología , Incidencia , India/epidemiologíaRESUMEN
The emergence of COVID-19 and its corresponding public health burden has prompted industries to rapidly implement traditional and novel control strategies to mitigate the likelihood of SARS-CoV-2 transmission, generating a surge of interest and application of ultraviolet germicidal irradiation (UVGI) sources as disinfection systems. With this increased attention the need to evaluate the efficacy and safety of these types of devices is paramount. A field study of the early implementation of UVGI devices was conducted at the Space Needle located in Seattle, Washington. Six devices were evaluated, including four low-pressure (LP) mercury-vapor lamp devices for air and surface sanitation not designed for human exposure and two krypton chloride (KrCl*) excimer lamp devices to be operated on and around humans. Emission spectra and ultraviolet (UV) irradiance at different locations from the UV devices were measured and germicidal effectiveness against SARS-CoV-2 was estimated. The human safety of KrCl* excimer devices was also evaluated based on measured irradiance and estimated exposure durations. Our results show all LP devices emitted UV radiation primarily at 254 nm as expected. Both KrCl* excimers emitted far UVC irradiation at 222 nm as advertised but also emitted at longer, more hazardous wavelengths (228 to 262 nm). All LP devices emitted strong UVC irradiance, which was estimated to achieve three log reduction of SARS-CoV-2 within 10 sec of exposure at reasonable working distances. KrCl* excimers, however, emitted much lower irradiance than needed for effective disinfection of SARS-CoV-2 (>90% inactivation) within the typical exposure times. UV fluence from KrCl* excimer devices for employees was below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs) under the reported device usage and work shifts. However, photosensitive individuals, human susceptibility, or exposure to multiple UV sources throughout a worker's day, were not accounted for in this study. Caution should be used when determining the acceptability of UV exposure to workers in this occupational setting and future work should focus on UVGI sources in public settings.
Asunto(s)
COVID-19 , SARS-CoV-2 , COVID-19/epidemiología , COVID-19/prevención & control , Desinfección/métodos , Humanos , Salud Pública , Rayos UltravioletaRESUMEN
Ultraviolet disinfection (UVD) units enhance onsite sewage systems (OSSs) in areas where conventional treatment is limited by site characteristics. Although UVD units are efficacious under testing conditions, few studies have considered their effectiveness when installed. This study used a mixed-methods approach to examine UVD unit effluent quality and determine the association between UV bulb status and fecal coliform levels. Samples from UVD units and pump chambers were tested for bacterial and physiochemical parameters. Field data were supplemented with data from retrospective compliance samples. A multivariate Tobit regression model predicted that the geometric mean (GM) fecal coliform concentration was 122% higher when the UV bulb was deficient than when it was not deficient, adjusted for other OSS deficiencies (95% CI: 36-428, p-value <0.001). The predicted GM fecal coliform concentration in malfunctioning UVD unit effluent (745 CFU/100 mL) exceeded field compliance standards (400 CFU/100 mL), and the odds of exceedance were 7.48 times higher when the UV bulb was deficient, adjusted for other OSS deficiencies (95% CI: 4.03-13.9, p-value <0.001). Despite limitations in the characterization of UV dose, the results validate the importance of UVD units to reduce bacterial loads and the need for further research into their field effectiveness.
Asunto(s)
Desinfección , Rayos Ultravioleta , Eliminación de Residuos Líquidos/métodos , Aguas Residuales/microbiología , Enterobacteriaceae , Heces , Estudios Retrospectivos , Aguas del AlcantarilladoRESUMEN
We performed a review of the environmental surveillance methods commonly used to collect and concentrate poliovirus (PV) from water samples. We compared the sampling approaches (trap vs grab), the process methods (precipitation vs filtration), and the various tools and chemical reagents used to separate PV from other viruses and pathogens in water samples (microporous glass, pads, polyethylene glycol [PEG]/dextran, PEG/sodium chloride, NanoCeram/ViroCap, and ester membranes). The advantages and disadvantages of each method are considered, and the geographical areas where they are currently used are discussed. Several methods have demonstrated the ability to concentrate and recover PVs from environmental samples. The details of the particular sampling conditions and locations should be considered carefully in method selection.
Asunto(s)
Monitoreo del Ambiente , Poliomielitis/virología , Poliovirus/aislamiento & purificación , Manejo de Especímenes/métodos , Humanos , Poliovirus/genética , Poliovirus/inmunologíaRESUMEN
Environmental surveillance of waterborne pathogens is vital for monitoring the spread of diseases, and electropositive filters are frequently used for sampling wastewater and wastewater-impacted surface water. Viruses adsorbed to electropositive filters require elution prior to detection or quantification. Elution is typically facilitated by a peristaltic pump, although this requires a significant startup cost and does not include biosafety or cross-contamination considerations. These factors may pose a barrier for low-resource laboratories that aim to conduct environmental surveillance of viruses. The objective of this study was to develop a biologically enclosed, manually powered, low-cost device for effectively eluting from electropositive ViroCap™ virus filters. The elution device described here utilizes a non-electric bilge pump, instead of an electric peristaltic pump or a positive pressure vessel. The elution device also fully encloses liquids and aerosols that could contain biological organisms, thereby increasing biosafety. Moreover, all elution device components that are used in the biosafety cabinet are autoclavable, reducing cross-contamination potential. This device reduces costs of materials while maintaining convenience in terms of size and weight. With this new device, there is little sample volume loss due to device inefficiency, similar virus yields were demonstrated during seeded studies with poliovirus type 1, and the time to elute filters is similar to that required with the peristaltic pump. The efforts described here resulted in a novel, low-cost, manually powered elution device that can facilitate environmental surveillance of pathogens through effective virus recovery from ViroCap filters while maintaining the potential for adaptability to other cartridge filters.
Asunto(s)
Monitoreo del Ambiente/métodos , Filtración/métodos , Aguas Residuales/virología , Microbiología del Agua , Adsorción , Humanos , Concentración de Iones de Hidrógeno , Poliovirus , AguaRESUMEN
Poliovirus (PV) is on the verge of global eradication. Due to asymptomatic shedding, eradication certification requires environmental and clinical surveillance. Current environmental surveillance methods involve collection and processing of 400-mL to 1-L grab samples by a two-phase separation method, where sample volume limits detection sensitivity. Filtration of larger sample volumes facilitates increased detection sensitivity. This study describes development of a pumpless in-field filtration system for poliovirus recovery from environmental waters. Recovery of PV types 1, 2, and 3 were compared for glass wool, ViroCap, and NanoCeram (PV1 only) filters. Seeded experiments were performed using 10(5) plaque forming units of PV inoculated into 10-L volumes of secondary effluent, surface water, or a 50:50 mixture of each at pH 7.0. Filter eluates were plated onto buffalo green monkey kidney cells for virus enumeration by plaque assay. Across all water types, recovery from glass wool filters for PV1, PV2, and PV3 averaged 17%, 28%, and 6%, respectively. Recovery from ViroCaps for PV1, PV2, and PV3 averaged 44%, 70%, and 81%, respectively. 10-L samples of moderate turbidity water were processed through ViroCap filters in less than 30 minutes using a pumpless, bag-mediated filtration system. Bag-mediated filtration offers a simple, compact, and efficient method for enhanced environmental PV surveillance.
Asunto(s)
Monitoreo del Ambiente/instrumentación , Poliovirus/aislamiento & purificación , Aguas del Alcantarillado/virología , Ultrafiltración/instrumentación , Aguas Residuales/virología , Microbiología del Agua , Animales , Células Cultivadas , Chlorocebus aethiops , Ensayo de Placa ViralRESUMEN
Typhoid fever-an acute febrile disease caused by infection with the bacterium Salmonella enterica serotype Typhi (S. Typhi)-continues to be a leading cause of global morbidity and mortality, particularly in developing countries with limited access to safe drinking water and adequate sanitation. Environmental surveillance, the process of detecting and enumerating disease-causing agents in wastewater, is a useful tool to monitor the circulation of typhoid fever in endemic regions. The design of environmental surveillance sampling plans and the interpretation of sampling results is complicated by a high degree of uncertainty and variability in factors that affect the final measured pathogens in wastewater samples, such as pathogen travel time through a wastewater network, pathogen dilution, decay and degradation, and laboratory processing methods. Computational models can, to an extent, assist in the design of sampling plans and aid in the evaluation of how different contributing factors affect sampling results. This study presents a computational model combining dynamic and probabilistic modeling techniques to estimate-on a spatial and temporal scale-the approximate probability of detecting S. Typhi within a wastewater system. This model may be utilized to inform environmental surveillance sampling plans and may provide useful insight into selecting appropriate sampling locations and times and interpreting results. A simulated applied modeling scenario is presented to demonstrate the model's functionality for aiding an environmental surveillance study in a typhoid-endemic community.
Asunto(s)
Salmonella typhi , Salmonella , Fiebre Tifoidea , Humanos , Fiebre Tifoidea/epidemiología , Aguas Residuales , Simulación por Computador , Monitoreo del AmbienteRESUMEN
Background: Wastewater-based surveillance is used to track the temporal patterns of the SARS-CoV-2 virus in communities. Viral RNA particle detection in wastewater samples can indicate an outbreak within a catchment area. We describe the feasibility of using a sewage network to monitor SARS-CoV-2 trend and use of genomic sequencing to describe the viral variant abundance in an urban district in Karachi, Pakistan. This was among the first studies from Pakistan to demonstrate the surveillance for SARS-CoV-2 from a semi-formal sewage system. Methods: Four sites draining into the Lyari River in District East, Karachi, were identified and included in the current study. Raw sewage samples were collected early morning twice weekly from each site between June 10, 2021 and January 17, 2022, using Bag Mediated Filtration System (BMFS). Secondary concentration of filtered samples was achieved by ultracentrifugation and skim milk flocculation. SARS-CoV-2 RNA concentrations in the samples were estimated using PCR (Qiagen ProMega kits for N1 & N2 genes). A distributed-lag negative binomial regression model within a hierarchical Bayesian framework was used to describe the relationship between wastewater RNA concentration and COVID-19 cases from the catchment area. Genomic sequencing was performed using Illumina iSeq100. Findings: Among the 151 raw sewage samples included in the study, 123 samples (81.5%) tested positive for N1 or N2 genes. The average SARS-CoV-2 RNA concentrations in the sewage samples at each lag (1-14 days prior) were associated with the cases reported for the respective days, with a peak association observed on lag day 10 (RR: 1.15; 95% Credible Interval: 1.10-1.21). Genomic sequencing showed that the delta variant dominated till September 2022, while the omicron variant was identified in November 2022. Interpretation: Wastewater-based surveillance, together with genomic sequencing provides valuable information for monitoring the community temporal trend of SARS-CoV-2. Funding: PATH, Bill & Melinda Gates Foundation, and Global Innovation Fund.
RESUMEN
Salmonella enterica serovar Typhi (S. Typhi) is the causative agent of Typhoid fever. Blood culture is the gold standard for clinical diagnosis, but this is often difficult to employ in resource limited settings. Environmental surveillance of waste-impacted waters is a promising supplement to clinical surveillance, however validating methods is challenging in regions where S. Typhi concentrations are low. To evaluate existing S. Typhi environmental surveillance methods, a novel process control organism (PCO) was created as a biosafe surrogate. Using a previous described qPCR assay, a modified PCR amplicon for the staG gene was cloned into E. coli. We developed a target region that was recognized by the Typhoid primers in addition to a non-coding internal probe sequence. A multiplex qPCR reaction was developed that differentiates between the typhoid and control targets, with no cross-reactivity or inhibition of the two probes. The PCO was shown to mimic S. Typhi in lab-based experiments with concentration methods using primary wastewater: filter cartridge, recirculating Moore swabs, membrane filtration, and differential centrifugation. Across all methods, the PCO seeded at 10 CFU/mL and 100 CFU/mL was detected in 100% of replicates. The PCO is detected at similar quantification cycle (Cq) values across all methods at 10 CFU/mL (Average = 32.4, STDEV = 1.62). The PCO was also seeded into wastewater at collection sites in Vellore (India) and Blantyre (Malawi) where S. Typhi is endemic. All methods tested in both countries were positive for the seeded PCO. The PCO is an effective way to validate performance of environmental surveillance methods targeting S. Typhi in surface water.
Asunto(s)
Monitoreo del Ambiente , Escherichia coli , Salmonella typhi , Salmonella typhi/genética , Salmonella typhi/aislamiento & purificación , Escherichia coli/genética , Escherichia coli/aislamiento & purificación , Monitoreo del Ambiente/métodos , Aguas Residuales/microbiología , Fiebre Tifoidea/microbiología , Fiebre Tifoidea/epidemiología , Fiebre Tifoidea/diagnóstico , Fiebre Tifoidea/prevención & control , Humanos , Microbiología del AguaRESUMEN
The typhoid conjugate vaccine is a safe and effective method for preventing Salmonella enterica serovar Typhi (typhoid) and the WHO's guidance supports its use in locations with ongoing transmission. However, many countries lack a robust clinical surveillance system, making it challenging to determine where to use the vaccine. Environmental surveillance is one alternative approach to identify ongoing transmission, but the cost to implement such a strategy is previously unknown. This paper estimated the cost of setting up and operating an environmental surveillance program for thirteen protocols that are in development, including thirteen cost components and twenty-seven pieces of equipment. Unit costs were obtained from research labs involved in protocol development and equipment information was obtained from manufacturers and the expert opinion of individuals in participating labs. We used Monte Carlo simulations to estimate the costs and the input parameters were modeled as distributions to incorporate the uncertainty. Total costs per sample including setup, overhead, and operational costs, range from $357-794 at a scale of 25 sites to $116-532 at 125 sites. Operational costs (ongoing expenditures) range from $218-584 per sample at a scale of 25 sites to $74-421 at 125 sites. Eleven of the thirteen protocols have operational costs below $200, at this higher scale. Protocols with higher up-front equipment costs benefit more from scale efficiencies and sensitivity analyses show that laboratory labor, processes, and consumables are the primary drivers of uncertainty. At scale, environmental surveillance for typhoid may be affordable (depending on the protocol, scale, and geographic context), though cost will need to be considered alongside future evaluations of test sensitivity. Opportunities to leverage existing infrastructure and multi-disease platforms may be necessary to further reduce costs.
RESUMEN
The COVID-19 pandemic has profoundly impacted health systems globally and robust surveillance has been critical for pandemic control, however not all countries can currently sustain community pathogen surveillance programs. Wastewater surveillance has proven valuable in high-income settings, but less is known about the utility of water surveillance of pathogens in low-income countries. Here we show how wastewater surveillance of SAR-CoV-2 can be used to identify temporal changes and help determine circulating variants quickly. In Malawi, a country with limited community-based COVID-19 testing capacity, we explore the utility of rivers and wastewater for SARS-CoV-2 surveillance. From May 2020-May 2022, we collect water from up to 112 river or defunct wastewater treatment plant sites, detecting SARS-CoV-2 in 8.3% of samples. Peak SARS-CoV-2 detection in water samples predate peaks in clinical cases. Sequencing of water samples identified the Beta, Delta, and Omicron variants, with Delta and Omicron detected well in advance of detection in patients. Our work highlights how wastewater can be used to detect emerging waves, identify variants of concern, and provide an early warning system in settings with no formal sewage systems.
Asunto(s)
COVID-19 , Aguas Residuales , Humanos , Aguas del Alcantarillado , SARS-CoV-2 , Prueba de COVID-19 , Pandemias , Ríos , COVID-19/diagnóstico , COVID-19/epidemiología , Monitoreo Epidemiológico Basado en Aguas Residuales , AguaRESUMEN
Wastewater surveillance for SARS-CoV-2 may serve as a useful source of data for public health departments as the virus is shed in the stool of infected individuals. However, for wastewater data to be actionable, wastewater must be collected, concentrated, and analyzed in a timely manner. This manuscript presents modifications on a skimmed milk concentration protocol to reduce processing time, increase the number of samples that can be processed at once, and enable use in resource-limited settings. Wastewater seeded with Human coronavirus OC43 (OC43) was concentrated using a skimmed milk flocculation protocol, and then pellets were directly extracted with the QIAamp Viral RNA Mini kit. This protocol has a higher average effective volume assayed (6.35 mL) than skimmed milk concentration methods, with and without Vertrel XF™, which involve resuspension of the pellets in PBS extraction prior to nucleic acid extraction (1.28 mL, 1.44 mL, respectively). OC43 was selected as a recovery control organism because both it and SARS-CoV-2 are enveloped respiratory viruses that primarily infect humans resulting in respiratory symptoms. The OC43 percent recovery for the direct extraction protocol (3.4%) is comparable to that of skimmed milk concentration with and without Vertrel XF™ extraction (4.0%, 2.6%, respectively). When comparing SARS-CoV-2 detection using McNemar's chi-square test, the pellet extraction method is not statistically different from skimmed milk concentration, with and without Vertrel XF™ extraction. This suggests that the method performs equally as well as existing methods. Added benefits include reduced time spent per sample and the ability to process more samples at a single time. Direct extraction of skimmed milk pellets is a viable method for quick turnaround of wastewater data for public health interventions.
Asunto(s)
COVID-19 , Virus , Humanos , Animales , SARS-CoV-2 , Aguas Residuales , Leche , Monitoreo Epidemiológico Basado en Aguas Residuales , ARN Viral/genéticaRESUMEN
Eradication of poliovirus (PV) is a global public health priority, and as clinical cases decrease, the role of environmental surveillance becomes more important. Persistence of PV and the environmental factors that influence it (such as temperature and sample type) are an important part of understanding and interpreting positive environmental surveillance samples. The objective of this study was to evaluate the persistence of poliovirus type 2 (PV2) and type 3 (PV3) in wastewater and sediment. Microcosms containing either 1) influent wastewater or 2) influent wastewater with a sediment matrix were seeded with either PV2 or PV3, and stored for up to 126 days at three temperatures (4°C, room temperature [RT], and 30°C). Active PV in the liquid of (1), and the sediment and liquid portions of (2) were sampled and quantified at up to 10 time points via plaque assay and RT-qPCR. A suite of 17 models were tested for best fit to characterize decay of PV2 and PV3 over time and determine the time points at which >90% (T90) and >99% (T99) reduction was reached. Linear models assessed the influence of experimental factors (matrix, temperature, virus type and method of detection) on the predicted T90 and T99 values. Results showed that when T90 was the dependent variable, virus type, matrix, and temperature significantly affected decay, and there was a clear interaction between the sediment matrix and temperature. When T99 was the dependent variable, only temperature and matrix type significantly influenced the decay metric. This study characterizes the persistence of both active and molecular PV2 and PV3 in relevant environmental conditions, and demonstrates that temperature and sediment both play important roles in PV viability. As eradication nears and clinical cases decrease, environmental surveillance and knowledge of PV persistence will play a key role in understanding the silent circulation in endemic countries.
Asunto(s)
Monitoreo del Ambiente , Sedimentos Geológicos/virología , Poliovirus/aislamiento & purificación , Aguas Residuales/virologíaRESUMEN
Wastewater based epidemiology (WBE) has emerged as a tool to track the spread of SARS-CoV-2. However, sampling at wastewater treatment plants (WWTPs) cannot identify transmission hotspots within a city. Here, we sought to understand the diurnal variations (24 h) in SARS-CoV-2 RNA titers at the neighborhood level, using pump stations that serve vulnerable communities (e.g., essential workers, more diverse communities). Hourly composite samples were collected from wastewater pump stations located in (i) a residential area and (ii) a shopping district. In the residential area, SARS-CoV-2 RNA concentration (N1, N2, and E assays) varied by up to 42-fold within a 24 h period. The highest viral load was observed between 5 and 7 am, when viral RNA was not diluted by stormwater. Normalizing peak concentrations during this time window with nutrient concentrations (N and P) enabled correcting for rainfall to connect sewage to clinical cases reported in the sewershed. Data from the shopping district pump station were inconsistent, probably due to the fluctuation of customers shopping at the mall. This work indicates pump stations serving the residential area offer a narrow time period of high signal intensity that could improve the sensitivity of WBE, and tracer compounds (N, P concentration) can be used to normalize SARS-CoV-2 signals during rainfall.
RESUMEN
Recreational beach environments have been recently identified as a potential reservoir for methicillin-resistant Staphylococcus aureus (MRSA); however, accurate quantification methods are needed for the development of risk assessments. This novel most-probable-number approach for MRSA quantification offers improved sensitivity and specificity by combining broth enrichment with MRSA-specific chromogenic agar.
Asunto(s)
Carga Bacteriana/métodos , Agua Dulce/microbiología , Staphylococcus aureus Resistente a Meticilina/aislamiento & purificación , Agua de Mar/microbiología , Sensibilidad y EspecificidadRESUMEN
Environmental surveillance as a part of wastewater-based epidemiology (WBE) of SARS-CoV-2 can provide an early, cost-effective, unbiased community-level indicator of circulating COVID-19 in a population. The objective of this study was to determine how widely SARS-CoV-2 detection in wastewater is being investigated and what methods are used. A survey was developed and distributed, with results showing that methods were rapidly applied to conduct SARS-CoV-2 WBE, primarily to test wastewater influent from large urban wastewater treatment plants. Additionally, most methods utilized small wastewater volumes and the primary concentration methods used were polyethylene glycol precipitation, membrane filtration and centrifugal ultrafiltration followed by nucleic acid extraction and assay for primarily nucleocapsid gene targets (N1, N2, and/or N3). Since this survey was performed, many laboratories have continued to optimize and implement a variety of methods for SARS-CoV-2 WBE. Method comparison studies completed since this survey was conducted will assist in developing WBE as a supplemental tool to support public health and policy decision making responses.
Asunto(s)
COVID-19 , Aguas Residuales , Monitoreo del Ambiente , Humanos , SARS-CoV-2 , Monitoreo Epidemiológico Basado en Aguas ResidualesRESUMEN
Enteric viruses, such as poliovirus, are a leading cause of gastroenteritis, which causes 2-3 million deaths annually. Environmental surveillance of wastewater supplements clinical surveillance for monitoring enteric virus circulation. However, while many environmental surveillance methods require liquid samples, some at-risk locations utilize pit latrines with waste characterized by high solids content. This study's objective was to develop and evaluate enteric virus concentration protocols for high solids content samples. Two existing protocols were modified and tested using poliovirus type 1 (PV1) seeded into primary sludge. Method 1 (M1) utilized acid adsorption, followed by 2 or 3 elutions (glycine/sodium chloride and/or threonine/sodium chloride), and skimmed milk flocculation. Method 2 (M2) began with centrifugation. The liquid fraction was filtered through a ViroCap filter and eluted (beef extract/glycine). The solid fraction was eluted (beef extract/disodium hydrogen phosphate/citric acid) and concentrated by skimmed milk flocculation. Recovery was enumerated by plaque assay. M1 yielded higher PV1 recovery than M2, though this result was not statistically significant (26.1% and 15.9%, respectively). M1 was further optimized, resulting in significantly greater PV1 recovery when compared to the original protocol (p < 0.05). This method can be used to improve understanding of enteric virus presence in communities without liquid waste streams.
Asunto(s)
Monitoreo del Ambiente/métodos , Poliovirus/aislamiento & purificación , Aguas del Alcantarillado/virología , Residuos Sólidos/análisis , Carga Viral/métodos , Infecciones por Enterovirus/prevención & control , Floculación , Gastroenteritis/prevención & control , Gastroenteritis/virología , Humanos , Poliomielitis/prevención & control , Ensayo de Placa Viral/métodos , Microbiología del AguaRESUMEN
The bag-mediated filtration system (BMFS) was developed to facilitate poliovirus (PV) environmental surveillance, a supplement to acute flaccid paralysis surveillance in PV eradication efforts. From April to September 2015, environmental samples were collected from four sites in Nairobi, Kenya, and processed using two collection/concentration methodologies: BMFS (> 3 L filtered) and grab sample (1 L collected; 0.5 L concentrated) with two-phase separation. BMFS and two-phase samples were analyzed for PV by the standard World Health Organization poliovirus isolation algorithm followed by intratypic differentiation. BMFS samples were also analyzed by a cell culture independent real-time reverse transcription polymerase chain reaction (rRT-PCR) and an alternative cell culture method (integrated cell culture-rRT-PCR with PLC/PRF/5, L20B, and BGM cell lines). Sabin polioviruses were detected in a majority of samples using BMFS (37/42) and two-phase separation (32/42). There was statistically more frequent detection of Sabin-like PV type 3 in samples concentrated with BMFS (22/42) than by two-phase separation (14/42, p = 0.035), possibly due to greater effective volume assayed (870 mL vs. 150 mL). Despite this effective volume assayed, there was no statistical difference in Sabin-like PV type 1 and Sabin-like PV type 2 detection between these methods (9/42 vs. 8/42, p = 0.80 and 27/42 vs. 32/42, p = 0.18, respectively). This study demonstrated that BMFS can be used for PV environmental surveillance and established a feasible study design for future research.