Fabrication of a novel electrochemical biosensor based on a molecular imprinted polymer-aptamer hybrid receptor for lysozyme determination.

In this work, a novel, sensitive, and rapid electrochemical biosensor was employed to detect lysozyme (Lys) using a double receptor of molecular imprinted polymer (MIP)-aptamer. First, a glassy carbon electrode (GCE) was modified with a nanocomposite consisting of multi-wall carbon nanotubes (MWCNTs), nitrogen-doped carbon quantum dots (N-CQDs), and chitosan. Subsequently, aptamer (Apt)-Lys complex was immobilized on MWCNTs-N-CQDs-chitosan/GCE via binding between carboxyl groups present in the nanocomposite and the terminal amine groups of the aptamer. Following that, methylene blue monomer was electrochemically polymerized around the Apt-Lys complex on the MWCNTs-N-CQDs-chitosan/GCE surface. Finally, after the template removal, the remaining cavities along with the aptamers created a new hybrid receptor of MIP-aptamer. The MWCNTs-N-CQDs-chitosan nanocomposite could provide large amounts of carboxyl groups for binding to amino-functionalized aptamers, considerable electrical conductivity, and a high surface-to-volume ratio. These beneficial features facilitated the Apt-Lys complex immobilization and gave improved electrochemical signal. The obtained MIP-aptamer hybrid receptor allowed lysozyme determination even at concentrations as low as 4.26 fM within the functional range of 1 fM to 100 nM.

Cultivation of newly isolated microalgae Coelastrum sp. in wastewater for simultaneous CO2 fixation, lipid production and wastewater treatment.

Cultivation of microalgae in wastewater is a promising and cost-effective approach for both CO2 biofixation and wastewater remediation. In this study, a new strain of Coelastrum sp. was isolated from cattle manure leachate. The isolated microalgae were then cultivated in wastewater. Effects of different sCOD concentrations (600, 750, 900, 1050 mg L-1) and light intensities (1000, 2300, 4600, 6900 and 10000 Lux) on biomass production, CO2 consumption rate and nutrient removal from wastewater were investigated. The results showed that maximum cell growth and CO2 consumption rate were 2.71 g L-1 and 53.12 mg L-1 day-1, respectively, which were obtained in the wastewater with 750 mg L-1 sCOD and under the light intensity of 6900 Lux. The microalgae were able to completely consume all CO2 after incubation period of 4 days. The highest sCOD, total Kjeldahl nitrogen (TKN), nitrate and total phosphorous (TP) removal at such conditions were 53.45, 91.18, 87.51 and 100%, respectively. The lipid content of microalgal biomass was also measured under different light intensities; maximum amount of lipid was determined to be 50.77% under illumination of 2300 Lux. Finally, the CO2 consumption rate and biomass productivity of microalgae in semi-batch culture with continuous gas flow (CO2 6%:N2 94%) were investigated. The rate of CO2 consumption and biomass productivity were 0.528 and 0.281 g L-1 day-1, respectively. The TKN, nitrate, TP and sCOD removal rate of microalgae were 83.51, 80.91, 100, 41.4%, respectively.

Piperine-The Bioactive Compound of Black Pepper: From Isolation to Medicinal Formulations.

Piperine is the major bio-active component of pepper, which imparts pungency and biting taste to it. This naturally occurring alkaloid has numerous demonstrated health effects and beneficial therapeutic properties; nevertheless, its biological applications are limited due to its poor solubility in aqueous environments. This emphasizes an implementation of advanced extraction approaches which could enhance the extraction yield of piperine from pepper and also the development of new formulations containing piperine to improve its in vivo bioavailability. This paper presents a review on the therapeutic and medicinal effects of piperine, its isolation from pepper fruit and the development of new formulations for its medicinal (pharmaceutical) applications. A thorough review on conventional and advanced separation techniques for the extraction of piperine from pepper is presented and an outline of the most significant conditions to improve the extraction yield is provided and discussed. Different methods used to measure and quantify the isolated piperine are also reviewed. An overview of biotechnological advancements for nanoparticle formulations of piperine or its incorporation in lipid formulations, which could enhance its bioavailability, is also presented.

Immobilized Kluyveromyces marxianus cells in carboxymethyl cellulose for production of ethanol from cheese whey: experimental and kinetic studies.

Cheese whey fermentation to ethanol using immobilized Kluyveromyces marxianus cells was investigated in batch and continuous operation. In batch fermentation, the yeast cells were immobilized in carboxymethyl cellulose (CMC) polymer and also synthesized graft copolymer of CMC with N-vinyl-2-pyrrolidone, denoted as CMC-g-PVP, and the efficiency of the two developed cell entrapped beads for lactose fermentation to ethanol was examined. The yeast cells immobilized in CMC-g-PVP performed slightly better than CMC with ethanol production yields of 0.52 and 0.49 g ethanol/g lactose, respectively. The effect of supplementation of cheese whey with lactose (42, 70, 100 and 150 g/l) on fermentative performance of K. marxianus immobilized in CMC beads was considered and the results were used for kinetic studies. The first order reaction model was suitable to describe the kinetics of substrate utilization and modified Gompertz model was quite successful to predict the ethanol production. For continuous ethanol fermentation, a packed-bed immobilized cell reactor (ICR) was operated at several hydraulic retention times; HRTs of 11, 15 and 30 h. At the HRT of 30 h, the ethanol production yield using CMC beads was 0.49 g/g which implies that 91.07 % of the theoretical yield was achieved.

Kinetic studies on fermentative production of biofuel from synthesis gas using Clostridium ljungdahlii.

The intrinsic growth, substrate uptake, and product formation biokinetic parameters were obtained for the anaerobic bacterium, Clostridium ljungdahlii, grown on synthesis gas in various pressurized batch bioreactors. A dual-substrate growth kinetic model using Luong for CO and Monod for H2 was used to describe the growth kinetics of the bacterium on these substrates. The maximum specific growth rate (µ(max) = 0.195 h(-1)) and Monod constants for CO (K s,CO = 0.855 atm) and H2 (K(s,H2) = 0.412 atm) were obtained. This model also accommodated the CO inhibitory effects on cell growth at high CO partial pressures, where no growth was apparent at high dissolved CO tensions (P(CO)(∗) > 0.743 atm). The Volterra model, Andrews, and modified Gompertz were, respectively, adopted to describe the cell growth, substrate uptake rate, and product formation. The maximum specific CO uptake rate (q(max) = 34.364 mmol/g cell/h), CO inhibition constant (K(I) = 0.601 atm), and maximum rate of ethanol (R(max) = 0.172 mmol/L/h at P(CO) = 0.598 atm) and acetate (R(max) = 0.096 mmol/L/h at P(CO) = 0.539 atm) production were determined from the applied models.

Metal-organic framework (MOF)-based biosensors for miRNA detection.

MicroRNAs (miRNAs) play several crucial roles in the physiological and pathological processes of the human body. They are considered as important biomarkers for the diagnosis of various disorders. Thus, rapid, sensitive, selective, and affordable detection of miRNAs is of great importance. However, the small size, low abundance, and highly similar sequences of miRNAs impose major challenges to their accurate detection in biological samples. In recent years, metal-organic frameworks (MOFs) have been applied as promising sensing materials for the fabrication of different biosensors due to their distinctive characteristics, such as high porosity and surface area, tunable pores, outstanding adsorption affinities, and ease of functionalization. In this review, the applications of MOFs and MOF-derived materials in the fabrication of fluorescence, electrochemical, chemiluminescence, electrochemiluminescent, and photoelectrochemical biosensors for the detection of miRNAs and their detection principle and analytical performance are discussed. This paper attempts to provide readers with a comprehensive knowledge of the fabrication and sensing mechanisms of miRNA detection platforms.

Multifaced application of AFEX-pretreated biomass in producing second-generation biofuels, ruminant animal feed, and value-added bioproducts.

Lignocellulosic biomass holds a crucial position in the prospective bio-based economy, serving as a sustainable and renewable source for a variety of bio-based products. These products play a vital role in displacing fossil fuels and contributing to environmental well-being. However, the inherent recalcitrance of biomass poses a significant obstacle to the efficient access of sugar polymers. Consequently, the bioconversion of lignocellulosic biomass into fermentable sugars remains a prominent challenge in biorefinery processes to produce biofuels and biochemicals. In addressing these challenges, extensive efforts have been dedicated to mitigating biomass recalcitrance through diverse pretreatment methods. One noteworthy process is Ammonia Fiber Expansion (AFEX) pretreatment, characterized by its dry-to-dry nature and minimal water usage. The volatile ammonia, acting as a catalyst in the process, is recyclable. AFEX contributes to cleaning biomass ester linkages and facilitating the opening of cell wall structures, enhancing enzyme accessibility and leading to a fivefold increase in sugar conversion compared to untreated biomass. Over the last decade, AFEX has demonstrated substantial success in augmenting the efficiency of biomass conversion processes. This success has unlocked the potential for sustainable and economically viable biorefineries. This paper offers a comprehensive review of studies focusing on the utilization of AFEX-pretreated biomass in the production of second-generation biofuels, ruminant feed, and additional value-added bioproducts like enzymes, lipids, proteins, and mushrooms. It delves into the details of the AFEX pretreatment process at both laboratory and pilot scales, elucidates the mechanism of action, and underscores the role of AFEX in the biorefinery for developing biofuels and bioproducts, and nutritious ruminant animal feed production. While highlighting the strides made, the paper also addresses current challenges in the commercialization of AFEX pretreatment within biorefineries. Furthermore, it outlines critical considerations that must be addressed to overcome these challenges, ensuring the continued progress and widespread adoption of AFEX in advancing sustainable and economically viable bio-based industries.

Fenugreek seed mucilage-based active edible films for extending fresh fruit shelf life: Antimicrobial and physicochemical properties.

Trigonella foenum-graecum, known as fenugreek, belongs to the leguminous family of wild growth in Western Asia, Europe, the Mediterranean, and Asia; its ripe seeds contain a pool of bioactive substances with great potential in the food industry and medicine. In this study, fenugreek seed mucilage (FSM) was extracted and characterized in its structural properties by X-ray diffraction, nuclear magnetic resonance, and high-performance liquid chromatography. Then, the applicability of FSM as an antimicrobial agent was demonstrated via the development of novel, active, edible FSM-based biofilms containing carboxymethyl cellulose and rosemary essential oil (REO). Incorporating REO in the biofilms brought about specific changes in Fourier-transform infrared spectra, affecting thermal degradation behavior. Scanning electron microscopy and atomic force microscopy morphography showed an even distribution of REO and smoother surfaces in the loaded films. Besides, the solubility tests evidenced a reduction in water solubility with increasing REO concentration from 1 to 3 wt%. The biological assay evidenced the antimicrobial activity of REO-loaded biofilms against Staphylococcus aureus and Escherichia coli. Finally, whole apples were dip-coated with FSM-based solutions to showcase future edible systems. The REO-loaded biofilms extended the shelf life of apples to 30 days, demonstrating their potential for sustainable and active coatings.

Conservative and cost-effective rehabilitation of a deep bite patient with worn dentition: A case report of the Dahl technique approach.

The reformation of teeth with severe wear is a real challenge for clinicians. Through a clinical case study, this case illustrates a minimally invasive approach using the Dahl technique and bonded restorations for the treatment of a worn dentition with a loss of vertical dimension of occlusion and restoring ideal aesthetics.

Development of Plantago ovata seed mucilage and xanthan gum-based edible coating with prominent optical and barrier properties.

This study investigates the fabrication of edible coating based on Plantago ovata seed mucilage (POSM). The films were prepared from POSM (1 %, w/v), glycerol (75 %, based on POSM mass), and xanthan gum (XG: 20, 30 and 40 %, based on POSM mass) by a casting method, and their physicochemical, mechanical, thermal, morphological, and barrier properties were determined. Results indicated the development of highly transparent (transparency values: 1.36 ± 0.05 to 2.42 ± 0.09) and hydrophobic films (contact angle: 101.57 ± 0.34 to107.08 ± 0.55o) with very low water vapor permeability (WVP: 2.77 ± 0.02 × 10-12 to 1.98 ± 0.04 × 10-12 g s-1m-1Pa-1), slight water solubility (31.14 ± 0.46 to 23.08 ± 0.82 %), and good mechanical properties (tensile strength: 30.87 ± 0.96 to 61.80 ± 0.71 MPa). Morphological studies also indicated smooth and uniform surfaces without pores and cracks. In addition, the films showed good antioxidant activity (61.46 to 68.71 %), and their antibacterial activity against E. coli, S. aureus and P. aeruginosa was also demonstrated. The applicability of the developed films to extend the shelf life of strawberries was shown by comparing the appearance of dip-coated strawberries and the control sample within 8 days at room temperature. Based on the results, the developed biofilms have great potential for edible coating and packaging applications.

Antiinfective properties of ursolic acid-loaded chitosan nanoparticles against Staphylococcus aureus.

The present study aimed to synthesize ursolic acid-loaded chitosan nanoparticles (UA-Ch-NPs) as an antiinfective agent against 21 Staphylococcus aureus isolates. The UA-Ch-NPs were synthesized by a simple method and then characterized by TEM, FTIR, DLS-zeta potential, and XRD analyses. According to the characterization results, highly dispersed spherical nanoparticles with a mean diameter of 258 nm and a zeta potential of + 40.1 mV were developed. The antibacterial properties of UA-Ch-NPs were investigated and their inhibitory effect on biofilm formation was demonstrated by AFM. Finally, the expression levels of icaA and icaD were measured using real-time PCR. Results indicated that the minimum inhibitory concentration (MIC) of UA and UA-Ch-NPs against S. aureus was 64 and 32 µg/mL, respectively. The treatment of bacterial cells with UA-Ch-NPs significantly decreased the expression of icaA and icaD genes which are engaged in biofilm formation. Our results indicated that UA-Ch-NPs could be a promising material for antibacterial and antibiofilm applications.

An investigation on the relationship between physicochemical characteristics of alumina-supported cobalt catalyst and its performance in dry reforming of methane.

This study deals with the development of alumina-supported cobalt (Co/Al2O3) catalysts with remarkable performance in dry reforming of methane (DRM) and least carbon deposition. The influence of Co content, calcination, and reduction temperatures on the physicochemical attributes and catalyst activity of the developed catalysts was extensively studied. For this purpose, several characterization techniques including ICP-MS, H2 pulse chemisorption, HRTEM, H2-TPR, N2 adsorption desorption, and TGA were implemented, and the properties of the developed catalysts were carefully analyzed. The impact of reaction temperature, feed gas ratio, and gas hourly space velocity (GHSV) on the reactants conversion and products yield was investigated. Use of 10%Co/Al2O3 catalyst, calcined at 500°C and reduced under H2 at 900°C in DRM reaction at 850°C, CH4/CO2 ratio of 1:1, and GHSV of 6 L.g-1.h-1 resulted in a remarkable catalytic activity and sustainable performance in long-term operation where great CO2 (96%) and CH4 (98%) conversions and high H2 (83%) and CO (91%) yields with a negligible carbon deposition (3 wt%) were attained in 100-h on-stream reaction. The good performance of the developed catalyst in DRM reaction was attributed to the small Co particle size with well-dispersion on the alumina support which increased the catalytic activity and also the strong metal-support interaction which inhibited any serious metal sintering and enhanced the catalyst stability.

CO2 reforming of methane to syngas over multi-walled carbon nanotube supported Ni-Ce nanoparticles: effect of different synthesis methods.

Several multi-walled carbon nanotubes supported Ni-Ce catalysts were synthesized, and their performance in carbon dioxide reforming of methane (CDRM) for syngas production was evaluated. The attachment of Ni-Ce nanoparticles to the functionalized carbon nanotube (fCNT) support was carried out using four synthesis routes, i.e., impregnation (I), sol-gel (S), co-precipitation (C), and hydrothermal (H) methods. Results indicated that synthesis method influences the properties of the NiCe/fCNT catalysts in terms of homogeneity of metal dispersion, size of crystallites, and metal-support interaction. The activity of the catalysts followed the order of NiCe/fCNT(H) > NiCe/fCNT(S) > NiCe/fCNT(C) > NiCe/fCNT(I). The NiCe/fCNT(H) catalyst exhibited the highest catalytic activity with CH4 and CO2 conversions of 92 and 96%, respectively, and resulted in syngas product with consistent H2/CO ratio of 0.91 at reaction temperature of 800 °C without notable deactivation up to 30 h of reaction. Moreover, the growth of carbon on the spent catalyst was only 2% with deposition rate of 4.08 mg/gcat·h; this was plausibly due to the well-dispersed distribution of nanoparticles on fCNT surface and abundant presence of oxygenated groups on the catalyst surface.

Enhancement of CO2 adsorption on biochar sorbent modified by metal incorporation.

This work is scrutinizing the development of metallized biochar as a low-cost bio-sorbent for low temperature CO2 capture with high adsorption capacity. Accordingly, single-step pyrolysis process was carried out in order to synthesize biochar from rambutan peel (RP) at different temperatures. The biochar product was then subjected to wet impregnation with several magnesium salts including magnesium nitrate, magnesium sulphate, magnesium chloride and magnesium acetate which then subsequently heat-treated with N2. The impregnation of magnesium into the biochar structure improved the CO2 capture performance in the sequence of magnesium nitrate > magnesium sulphate > magnesium chloride > magnesium acetate. There is an enhancement in CO2 adsorption capacity of metallized biochar (76.80 mg g-1) compare with pristine biochar (68.74 mg g-1). It can be justified by the synergetic influences of physicochemical characteristics. Gas selectivity study verified the high affinity of biochar for CO2 capture compared with other gases such as air, methane, and nitrogen. This investigation also revealed a stable performance of the metallized biochar in 25 cycles of CO2 adsorption and desorption. Avrami kinetic model accurately predicted the dynamic CO2 adsorption performance for pristine and metallized biochar.

Single-Layer Assembly of Multifunctional Carboxymethylcellulose on Graphene Oxide Nanoparticles for Improving in Vivo Curcumin Delivery into Tumor Cells.

Nanodrug delivery systems are considered as promising therapeutic platforms to convey drugs to tumor cells. In this study, a single layer of carboxymethylcellulose (CMC) and poly N-vinylpyrrolidone (PVP) was cross-linked through disulfide bond and deposited on graphene oxide nanoparticles (GO NPs) using layer-by-layer technique. Overexpression of folate receptors on tumor cells is a great hallmark for drug delivery systems; though the NPs were functionalized by monoclonal folic acid antibody (FA) using polyethylene glycol (PEG) as linker. The mean diameter of synthesized nanoparticles was 60 nm. Curcumin was encapsulated within CMC layer with high encapsulation capacity of 94%. In vitro investigation showed 87% curcumin release at simulated tumor environment. Curcumin loaded FA modified CMC/PVP GO NPs showed high inhibition of 76 and 81% against Saos2 and MCF7 cell lines in vitro. In vivo investigations on 4T1 bearing breast cancer mice model exhibited 76% antitumor efficiency via active targeting mechanism of folate mediated transport without any significant side effect. Immunohistochemistry and immunofluorescence analyses showed enhanced antiangiogenesis, apoptosis and tumor growth inhibition.

Catalytic CO2 gasification of rubber seed shell-derived hydrochar: reactivity and kinetic studies.

In this study, hydrothermal carbonization (HTC) of a biomass was used as a means to improve the physicochemical properties of rubber seed shell (RSS) and enhance its reactivity in the char-CO2 gasification reaction, known as the Boudouard reaction (C + CO2 ↔ 2CO). Hydrochar samples were developed by hydrothermal treatment of RSS, without separating the solid residue from the liquid product, at 433, 473, 513, and 553 K under autogenous pressure. The CO2 gasification reactivity of the developed hydrochars was then investigated at different heating rates (5, 10, 20, and 30 K/min) by the non-isothermal thermogravimetric method. The hydrochars revealed higher reactivity and improved gasification characteristics compared to the untreated biomass, while the hydrochar which was filtered from the liquid slurry showed lower reactivity compared to the untreated biomass. This was due to the chemical and structural evolutions of the biomass during hydrothermal treatment as indicated by various analyses. The gasification reactivity of the hydrochar was substantially enhanced by introduction of a catalyst (NaNO3) during HTC. Kinetic analysis of the char-CO2 gasification reaction was carried out by applying Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink isoconversional methods, and thermodynamic parameters were also determined. The activation energy of the Na-loaded RSS hydrochar in CO2 gasification (120-154 kJ/mol) was considerably lower than that of the untreated biomass (153-172 kJ/mol). Thermodynamic studies also confirmed the promoting effect of hydrothermal treatment and catalyst impregnation on enhancement of reactivity of the virgin biomass and reduction of gasification temperature.

Fabrication and evaluation of carboxymethylated diethylaminoethyl cellulose microcarriers as support for cellular applications.

Cellulose based microcarriers can be used in biomedical science as supports for cell adhesion and proliferation. However, to facilitate cell attachment to their surface, they require appropriate functional surface charge. Cell function such as adhesion and growth is increased on the modified surfaces with cationic and anionic groups. In this research, diethylaminoethyl cellulose was carboxymethylated to produce soluble multifunctional cellulose with simultaneous presence of cationic and anionic functional groups. Then, carboxymethylated diethylaminoethyl cellulose (CM-DEAEC) were produced by ionic crosslinking. Various instrumental techniques were applied to characterize the microcarriers. Biological tests were also performed to determine cell seeding efficiency, proliferation and attachment on microcarriers. Fabricated CM-DEAEC microcarriers had 1500-1800 µm diameter, +26.0 surface potential, 376% swelling behavior and 233 °C glass transition temperature respectively. The findings showed that CM-DEAEC microcarriers support cellular attachment and proliferation very well and hence are promising materials for cell therapy and tissue engineering applications.

CO2 bio-fixation and biofuel production in an airlift photobioreactor by an isolated strain of microalgae Coelastrum sp. SM under high CO2 concentrations.

Microalgae cultivation is a promising approach to remove ambient CO2 via photosynthesis process. This paper investigates the impact of high CO2 concentrations (6, 12, and 16%) on algae growth, CO2 biofixation, lipid and carbohydrate contents, and nutrient removal of newly isolated microalgae, Coelastrum sp. SM. In addition, the ability of microalgae to produce biodiesel at optimal condition was studied. The microalgae were cultivated in wastewater using an airlift photobioreactor. Under 12% CO2, the maximum biomass productivity and CO2 fixation rate were 0.267 g L-1 day-1 and 0.302 g L-1 h-1, respectively. Total Kjeldahl nitrogen (TKN), total phosphorous (TP), nitrate, and sCOD removal efficiency were 84.01, 100, 86.811, and 73.084%, respectively. Under 12% CO2 and at the same condition for cell growth, the highest lipid and carbohydrate contents were 3 7.91 and 58.45%, respectively. The composition of fatty acids methyl ester (FAME) of the microalga lipid was defined. Based on the obtained results and FAME profile, Coelastrum sp. SM was a suitable feedstock for biodiesel production and also, the organism had a great potential for CO2 biofixation, which is also more suitable than any other reported strains in other related studies.

Microwave-enhanced CO2 gasification of oil palm shell char.

CO2 gasification of oil palm shell (OPS) char to produce CO through the Boudouard reaction (C + CO2 ↔ 2CO) was investigated under microwave irradiation. A microwave heating system was developed to carry out the CO2 gasification in a packed bed of OPS char. The influence of char particle size, temperature and gas flow rate on CO2 conversion and CO evolution was considered. It was attempted to improve the reactivity of OPS char in gasification reaction through incorporation of Fe catalyst into the char skeleton. Very promising results were achieved in our experiments, where a CO2 conversion of 99% could be maintained during 60 min microwave-induced gasification of iron-catalyzed char. When similar gasification experiments were performed in conventional electric furnace, the superior performance of microwave over thermal driven reaction was elucidated. The activation energies of 36.0, 74.2 and 247.2 kJ/mol were obtained for catalytic and non-catalytic microwave and thermal heating, respectively.

Ash of palm empty fruit bunch as a natural catalyst for promoting the CO2 gasification reactivity of biomass char.

Palm empty fruit bunch ash (EFB-ash) was used as a natural catalyst, rich in potassium to enhance the CO2 gasification reactivity of palm shell char (PS-char). Various EFB-ash loadings (ranging from 0 to 12.5wt.%) were implemented to improve the reactivity of PS-char during CO2 gasification studies using thermogravimetric analysis. The achieved results explored that the highest gasification reactivity was devoted to 10% EFB-ash loaded char. The SEM-EDS and XRD analyses further confirmed the successful loading of EFB-ash on PS-char which contributed to promoting the gasification reactivity of char. Random pore model was applied to determine the kinetic parameters in catalytic gasification of char at various temperatures of 800-900°C. The dependence of char reaction rate on gasification temperature resulted in a straight line in Arrhenius-type plot, from which the activation energy of 158.75kJ/mol was obtained for the catalytic char gasification.