Evaluation of Sample Preparation Methods for Non-Target Screening of Organic Micropollutants in Urban Waters Using High-Resolution Mass Spectrometry.

Non-target screening (NTS) has gained interest in recent years for environmental monitoring purposes because it enables the analysis of a large number of pollutants without predefined lists of molecules. However, sample preparation methods are diverse, and few have been systematically compared in terms of the amount and relevance of the information obtained by subsequent NTS analysis. The goal of this work was to compare a large number of sample extraction methods for the unknown screening of urban waters. Various phases were tested for the solid-phase extraction of micropollutants from these waters. The evaluation of the different phases was assessed by statistical analysis based on the number of detected molecules, their range, and physicochemical properties (molecular weight, standard recoveries, polarity, and optical properties). Though each cartridge provided its own advantages, a multilayer cartridge combining several phases gathered more information in one single extraction by benefiting from the specificity of each one of its layers.

Comprehensive analysis of a widely pharmaceutical, furosemide, and its degradation products in aquatic systems: Occurrence, fate, and ecotoxicity.

Many pharmaceutical compounds end up in the environment due to incomplete removal by wastewater treatment plants (WWTPs). Some compounds are sometimes present in significant concentrations and therefore represent a risk to the aquatic environment. Furosemide is one of the most widely used drugs in the world. Considered as an essential drug by the World Health Organization, this powerful loop diuretic is used extensively to treat hypertension, heart and kidney failure and many other purposes. However, this important consumption also results in a significant release of furosemide in wastewater and in the receiving environment where concentrations of a few hundred ng/L to several thousand have been found in the literature, making furosemide a compound of great concern. Also, during its transport in wastewater systems and WWTPs, furosemide can be degraded by various processes resulting in the production of more than 74 by-products. Furosemide may therefore present a significant risk to ecosystem health due not only to its direct cytotoxic, genotoxic and hepatotoxic effects in animals, but also indirectly through its transformation products, which are poorly characterized. Many articles classify furosemide as a priority pollutant according to its occurrence in the environment, its persistence, its elimination by WWTPs, its toxicity and ecotoxicity. Here, we present a state-of-the-art review of this emerging pollutant of interest, tracking it, from its consumption to its fate in the aquatic environment. Discussion points include the occurrence of furosemide in various matrices, the efficiency of many processes for the degradation of furosemide, the subsequent production of degradation products following these treatments, as well as their toxicity.

Spatial and temporal characteristics of microbial communities in the Seine river in the greater Paris area under anthropogenic perturbation.

Microorganisms play an important role in maintaining the proper functioning of river ecosystems and are promising candidates for environmental indicators. They are also highly sensitive to environmental changes. It is necessary to have basic knowledge about them in order to know the ecological status of river ecosystem. To our knowglege, there is very little information on the status of microorganisms in surface water of the Seine River, although the Seine River is one of the rivers that suffers the greatest impact from humain activities in the world due to a weak dilution effect. It is therefore necessary to carry out a microbial analysis to assess the ecological status of the Seine River and to use it as a reference to compare with the future state when, for instance, new disinfection technologies of wastewater are implemented. To this end, the microbial communities of the Seine surface water were analyzed, taking into account the spatial effect, including the tributaries, and from upstream to downstream of the Paris conurbation and the temporal aspect, with a monitoring over 4 seasons. The results showed that the microbiome of the water is highly diverse and involved a variety of functions. The main phyla making up the surface water microbiome were Proteobacteria, Actinobacteriota, Firmicutes, Bacteroidota, while other minor phyla were Deinococcota, Patescibacteria, Gemmatimonadota, Cyanobacteria, Bdellovibrionota, Acidobacteriota, Campilobacterota, Myxococcota, and Desulfobacterota. Overall, the microbial community did not change spatially (with the exception of some minor differences between upstream and downstream), but did vary seasonally. The main factors influencing this microbiome were temperature, nitrate and orthophosphate concentrations. The main predicted functions were related to cell metabolism, in particular carbohydrates, amino acids, lipids, energy, vitamins and cofactors, and cell mobility. The microbial compositions showed a strong balance between microbial groups and were involved in the degradation of recalcitrant compounds.

Assessing the effectiveness of performic acid disinfection on effluents: focusing on bacterial abundance and diversity.

Poorly-treated wastewater harbors harmful microorganisms, posing risks to both the environment and public health. To mitigate this, it is essential to implement robust disinfection techniques in wastewater treatment plants. The use of performic acid (PFA) oxidation has emerged as a promising alternative, due to its powerful disinfection properties and minimal environmental footprint. While PFA has been used to inactivate certain microbial indicators, its potential to tackle the entire microbial community in effluents, particularly resistant bacterial strains, remains largely unexplored. The present study evaluates the efficacy of PFA disinfection on the microbial communities of a WWTP effluent, through microbial resistance mechanisms due to their membrane structure. The effluent microbiome was quantified and identified. The results showed that the number of damaged cells increases with CT, reaching a maximum for CT = 240 mg/L•min and plateauing around 60 mg/L•min, highlighting the optimal conditions for PFA-disinfection against microbial viability. A low PFA level with a 10-min contact time significantly affected the microbial composition. It is worth noting the sensitivity of several bacterial genera such as Flavobacterium, Pedobacter, Massilia, Exiguobacterium, and Sphingorhabdus to PFA, while others, Acinetobacter, Leucobacter, Thiothrix, Paracoccus, and Cloacibacterium, showed resistance. The results detail the resistance and sensitivity of bacterial groups to PFA, correlated with their Gram-positive or Gram-negative membrane structure. These results underline PFA effectiveness in reducing microbial levels and remodeling bacterial composition, even with minimal concentrations and short contact times, demonstrating its suitability for widespread application in WWTPs.

Assessment of two non-invasive techniques for measuring turbulent benthic fluxes in a shallow lake.

Benthic fluxes refer to the exchange rates of nutrients and other compounds between the water column and the sediment bed in aquatic ecosystems. Their quantification contributes to our understanding of aquatic ecosystem functioning. Near-bed hydrodynamics plays an important role at the sediment-water interface, especially in shallow lakes, but it is poorly considered by traditional measuring techniques of flux quantification, such as sediment incubations. Thus, alternative sampling techniques are needed to characterize key benthic fluxes under in-situ hydrodynamic conditions. This study aimed to evaluate the performance of two promising methods: relaxed eddy accumulation (REA) and mass transfer coefficient (MTC). We applied them in a hyper-eutrophic shallow lake to measure the fluxes of ammonium, phosphate, iron, and manganese ions. For the first time, REA revealed hourly nutrient flux variations, indicating a strong lake biogeochemical dynamics at short time-scales. Daily average fluxes are of similar orders of magnitude for REA and MTC for ammonium (24 and 42 mmol m2 d-1), manganese (1.0 and 0.8), and iron (0.8 and 0.7) ions. They are one order of magnitude higher than fluxes estimated from sediment incubations, due to the difficulty in reproducing in-situ oxygen and hydrodynamic conditions in the laboratory. Although the accuracy of both techniques needs to be improved, the results revealed their potential: REA follows the short-term biogeochemical dynamics of sediments, while MTC could be widely used for lake monitoring because of its simpler implementation.

Target and non-target screening of biomarkers in wastewater: towards a unique analytical methodology for sample preparation.

This study aims to optimize a single preparation methodology based on solid-phase extraction (SPE) that could fit both target and non-target screening of organic biomarkers in raw wastewater, allowing the cross-comparison of results obtained from a same dataset. The efficiency of SPE sorbents used alone (HLB) or in combination in a multilayer cartridge was evaluated based on (i) the extraction recovery and matrix effect in environmental samples (surface water and wastewater) for a list of biomarkers (pharmaceuticals, licit and illicit drugs, artificial sweeteners, isoprostanes, polyphenols) and (ii) a number of detected features and their intensity in HRMS. The selected method uses a combination of three SPE sorbents mixed together (HLB, X-AW and X-CW) and seems to take full advantage of each, providing satisfactory validation parameters (recovery, instrumental limit of detection, linearity range and limit of quantification) over a large range of physico-chemical properties while ensuring promising results for non-target screening applications. Of the 65 targeted compounds, nearly all of them (47) were detected in wastewater influent samples with concentration above the limit of quantification, while at the same time over 10 000 features were recorded according to the high resolution mass spectrometry (HRMS) fingerprint, holding out the promise that a common protocol for these two analyses, with their very contrasting constraints and objectives, is possible.

atpE gene as a new useful specific molecular target to quantify Mycobacterium in environmental samples.

BACKGROUND: The environment is the likely source of many pathogenic mycobacterial species but detection of mycobacteria by bacteriological tools is generally difficult and time-consuming. Consequently, several molecular targets based on the sequences of housekeeping genes, non-functional RNA and structural ribosomal RNAs have been proposed for the detection and identification of mycobacteria in clinical or environmental samples. While certain of these targets were proposed as specific for this genus, most are prone to false positive results in complex environmental samples that include related, but distinct, bacterial genera. Nowadays the increased number of sequenced genomes and the availability of software for genomic comparison provide tools to develop novel, mycobacteria-specific targets, and the associated molecular probes and primers. Consequently, we conducted an in silico search for proteins exclusive to Mycobacterium spp. genomes in order to design sensitive and specific molecular targets. RESULTS: Among the 3989 predicted proteins from M. tuberculosis H37Rv, only 11 proteins showed 80% to 100% of similarity with Mycobacterium spp. genomes, and less than 50% of similarity with genomes of closely related Corynebacterium, Nocardia and Rhodococcus genera. Based on DNA sequence alignments, we designed primer pairs and a probe that specifically detect the atpE gene of mycobacteria, as verified by quantitative real-time PCR on a collection of mycobacteria and non-mycobacterial species. The real-time PCR method we developed was successfully used to detect mycobacteria in tap water and lake samples. CONCLUSIONS: The results indicate that this real-time PCR method targeting the atpE gene can serve for highly specific detection and precise quantification of Mycobacterium spp. in environmental samples.

Occurrence and fate of an emerging drug pollutant and its by-products during conventional and advanced wastewater treatment: Case study of furosemide.

Conventional wastewater treatment systems are not designed to remove pharmaceutical compounds from wastewater. These compounds can be degraded into many other transformation products which are hardly, if at all, studied. In this context, we studied the occurrence and degradation of furosemide, a very frequently detected diuretic, along with its known degradation products in several types of wastewater. Influent and effluent from the Seine-Centre Wastewater Treatment Plant (WWTP) (Paris, France) as well as outlet of residential care homes (Dordogne, France) were analyzed by Ultra-Performance Liquid Chromatography-tandem Mass Spectrometry (UPLC-MS/MS) to quantify furosemide and its known degradation products, saluamine and pyridinium of furosemide. Oxidation experiments (chlorination, ozonation and UV photolysis with hydrogen peroxide) were then performed on furosemide solutions and on water from residential care facilities to study the degradation of furosemide by potential advanced processes, and also to identify unknown oxidation products by high-resolution mass spectrometry. Furosemide was well degraded in Seine-Centre WWTP (>75%) but did not increase the concentrations of its main degradation products. Saluamine and pyridinium of furosemide were already present at similar concentrations to furosemide in the raw wastewater (∼2.5-3.5 µg.L-1), and their removal in the WWTPs were very high (>80%). Despite their removal, the three compounds remained present in treated wastewater effluents at concentrations of hundreds of nanograms per liter. Chlorination degraded furosemide without pyridinium production unlike the other two processes. Chlorination and ozonation were also effective for the removal of furosemide and pyridinium in residential care home water, but they resulted in the production of saluamine. To our knowledge this is the first evidence of saluamine and pyridinium of furosemide in real water samples in either the particulate or dissolved phase.

Municipal wastewater treatment by biofiltration: comparisons of various treatment layouts. Part 1: assessment of carbon and nitrogen removal.

One of the largest wastewater treatment plants in the Paris conurbation (240,000 m(3)/d) has been studied over several years in order to provide technical and economical information about biological treatment by biofiltration. Biofiltration systems are processes in which carbon and nitrogen pollution of wastewater are treated by ascendant flow through immersed fixed cultures. This paper, focused on technical information, aims: (1) to compare performances of the three biological treatment layouts currently used in biofiltration systems: upstream denitrification (UD), downstream denitrification (DD) and combined upstream-downstream denitrification (U-DD) layouts; and (2) to describe in detail each treatment step. Our study has shown that more than 90% of the carbon and ammoniacal pollution is removed during biological treatment, whatever the layout used. Nitrate, produced during nitrification, is then reduced to atmospheric nitrogen. This reduction is more extensive when the denitrification stage occurs downstream from the treatment (DD layout with methanol addition), whereas it is only partial when it is inserted upstream from the treatment (UD layout - use of endogenous carbonaceous substrate). So, the UD layout leads to a nitrate concentration that exceeds the regulatory threshold in the effluent, and the treatment must be supplemented with a post-denitrification step (U-DD layout). Our work has also shown that the optimal ammonium-loading rate is about 1.1-1.2 kg N-NH(4)(+) per m(3) media (polystyrene) and day. For denitrification, the optimal nitrate-loading rate is about 2.5 kg N per m(3) media (expanded clay) and day in the case of DD with methanol, and is about 0.25 kg N-NO(3)(-) per m(3) media and day in the case of UD with exogenous carbonaceous substrate.

Biobased polymer resources and essential oils: a green combination for antibacterial applications.

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

Mycobacterium behavior in wastewater treatment plant, a bacterial model distinct from Escherichia coli and Enterococci.

Mycobacteria are waterborne emerging pathogens causing infections in human. Mycobacteria have been previously isolated from wastewater and sludge, but their densities were not estimated due to cultural biases. In order to evaluate the impact of wastewater treatment processes on mycobacteria removal, we used a real time PCR method. First we compared six DNA extraction methods and second we used the more efficient DNA extraction procedure (i.e., enzymatic lysis combined with hexadecyltrimethylammonium bromide-NaCl procedure) in order to quantify Mycobacterium. With the aim to identify parameters that could serve as indicator of mycobacterial behavior, mycobacterial densities were measured in parallel to those of Escherichia coli and enterococci, and to concentrations of chemical parameters usually monitored in wastewater. Mycobacterium reached 5.5 × 105 ± 3.9 × 105 copies/L in the influent, but was not detected in the effluent after decantation and biofiltration. Most mycobacteria (98.6 ± 2.7%, i.e. 2.4 ± 0.7 log10) were removed by the physical-chemical decantation, and the remaining mycobacteria were removed by biofiltration. In contrast, enterococci and E. coli were lightly removed by decantation step and mainly removed by biofiltration. Our results showed that Mycobacterium corresponds to a hydrophobic behavior linked to insoluble compound removal, whereas enterococci and E. coli refer to hydrophilic behaviors linked to soluble compound removals.

Urban pathways of biocides towards surface waters during dry and wet weathers: Assessment at the Paris conurbation scale.

Eighteen biocides used in building materials and domestic products were monitored in wastewater treatment plants (WWTPs) during dry weather and in combined sewer overflows (CSOs) during wet weather in the Paris conurbation. The aims of this study were to (i) acquire data on biocides in urban waters, which are very scarce up to now, (ii) identify their origins in CSOs with the perspective of reducing these contaminants at source, and (iii) compare and rank biocide pathways to the river (dry vs. wet weather) at the annual and conurbation scales. The results showed the ubiquity of the 18-targeted biocides in WWTP waters and CSOs. High concentrations of methylisothiazolinone, benzisothiazolinone (0.2-0.9 µg/L) and benzalkonium C12 (0.5-6 µg/L) were measured in wastewater. Poor WWTP removals (< 50 %) were observed for most of the biocides. Both wastewater (mainly domestic uses) and stormwater (leaching from building materials) contributed to the CSO contamination. However, benzisothiazolinone mainly came from wastewater whereas diuron, isoproturon, terbutryn, carbendazim, tebuconazole, and mecoprop mainly came from stormwater. Annual mass loads discharged by WWTPs and CSOs into the Seine River were estimated using a stochastic approach (Monte Carlo simulations) at the conurbation scale and showed that WWTP discharges are the major entry pathway.

Inter-laboratory mass spectrometry dataset based on passive sampling of drinking water for non-target analysis.

Non-target analysis (NTA) employing high-resolution mass spectrometry is a commonly applied approach for the detection of novel chemicals of emerging concern in complex environmental samples. NTA typically results in large and information-rich datasets that require computer aided (ideally automated) strategies for their processing and interpretation. Such strategies do however raise the challenge of reproducibility between and within different processing workflows. An effective strategy to mitigate such problems is the implementation of inter-laboratory studies (ILS) with the aim to evaluate different workflows and agree on harmonized/standardized quality control procedures. Here we present the data generated during such an ILS. This study was organized through the Norman Network and included 21 participants from 11 countries. A set of samples based on the passive sampling of drinking water pre and post treatment was shipped to all the participating laboratories for analysis, using one pre-defined method and one locally (i.e. in-house) developed method. The data generated represents a valuable resource (i.e. benchmark) for future developments of algorithms and workflows for NTA experiments.

Comparison of culture methods for isolation of nontuberculous mycobacteria from surface waters.

The environment is the likely source of most nontuberculous mycobacteria (NTM) involved in human infections, especially pulmonary, skin, and soft tissue infections. In order to measure the prevalence of NTM in different aquatic ecosystems, we tried to standardize the culture methods used for surface water testing since many procedures have been described previously. Cultivation of mycobacteria requires long-term incubation in rich media and inactivation of rapidly growing microorganisms whose growth impedes observation of mycobacterial colonies. Consequently, the two criteria used for evaluation of the methods examined were (i) the rate of inhibition of nontarget microorganisms and (ii) the efficiency of recovery of mycobacteria. We compared the competitive growth of Mycobacterium chelonae and M. avium with nontarget microorganisms on rich Middlebrook 7H11-mycobactin medium after treatment by several chemical decontamination methods that included acids, bases, detergent, or cetylpyridinium chloride (CPC) with and without an antibiotic cocktail, either PANTA (40 U/ml polymyxin, 4 microg/ml amphotericin B, 16 microg/ml nalidixic acid, 4 microg/ml trimethoprim, and 4 microg/ml azlocillin) or PANTAV (PANTA plus 10 microg/ml vancomycin). Our results showed that treatment for 30 min with CPC (final concentration, 0.05%) of water concentrated by centrifugation, followed by culture on a rich medium supplemented with PANTA, significantly decreased the growth of nontarget microorganisms (the concentrations were 6.2 +/- 0.4 log(10) CFU/liter on Middlebrook 7H11j medium and 4.2 +/- 0.2 log(10) CFU/liter on Middlebrook 7H11j medium containing PANTA [P < 0.001]), while the effect of this procedure on NTM was not as great (the concentrations of M. chelonae on the two media were 7.0 +/- 0.0 log(10) CFU/liter and 6.9 +/- 0.0 log(10) CFU/liter, respectively, and the concentrations of M. avium were 9.1 +/- 0.0 log(10) CFU/liter and 8.9 +/- 0.0 log(10) CFU/liter, respectively). We propose that this standardized culture procedure could be used for detection of NTM in aquatic samples.

Development of a real-time qPCR method for detection and enumeration of Mycobacterium spp. in surface water.

A real-time quantitative PCR method was developed for the detection and enumeration of Mycobacterium spp. from environmental samples and was compared to two other methods already described. The results showed that our method, targeting 16S rRNA, was more specific than the two previously published real-time quantitative PCR methods targeting another 16S rRNA locus and the hsp65 gene (100% versus 44% and 91%, respectively).

Correction to: biocide emissions from building materials during wet weather: identification of substances, mechanism of release and transfer to the aquatic environment.

The original publication of this paper contains a mistake.

Biocide emissions from building materials during wet weather: identification of substances, mechanism of release and transfer to the aquatic environment.

Biocides are added to or applied on building materials to prevent microorganisms from growing on their surface or to treat them. They are leached into building runoff and contribute to diffuse contamination of receiving waters. This review aimed at summarizing the current state of knowledge concerning the impact of biocides from buildings on the aquatic environment. The objectives were (i) to assess the key parameters influencing the leaching of biocides and to quantify their emission from buildings, (ii) to determine the different pathways from urban sources into receiving waters and (iii) to assess the associated environmental risk. Based on consumption data and leaching studies, a list of substances to monitor in receiving water was established. Literature review of their concentrations in the urban water cycle showed evidences of contamination and risk for aquatic life, which should put them into consideration for inclusion to European or international monitoring programs. However, some biocide concentration data in urban and receiving waters is still missing to fully assess their environmental risk, especially for isothiazolinones, iodopropynyl carbamate, zinc pyrithione and quaternary ammonium compounds, and little is known about their transformation products. Although some models supported by actual data were developed to extrapolate emissions on larger scales (watershed or city scales), they are not sufficient to prioritize the pathways of biocides from urban sources into receiving waters during both dry and wet weathers. Our review highlights the need to reduce emissions and limit their transfer into rivers and reports several solutions to address these issues.

Priority pollutants in surface waters and settleable particles within a densely urbanized area: case study of Paris (France).

Implementation of the European Water Framework Directive 2000/60/EC (WFD) requires Member States to expand their collective knowledge of priority pollutants (PPs) within receiving waters. To achieve this objective, information on the occurrence of PPs in surface waters and, more specifically, within densely urbanized areas needs to be collected. This study has therefore been designed to provide information on both PP occurrence and concentration build-up along a heavily urbanized transect of the Seine River in the Paris region (France). A large range of PPs were observed in settleable particles and, to a lesser extent, in the waters surveyed. In surface waters, a total of 18 PPs, including 15 priority hazardous substances, were indeed detected, yet concentrations rarely exceeded the limit of quantification. In fact, only diuron, DEHP, fluoranthene and para-tert-octylphenol are observed on a frequent basis, with concentrations ranging from <0.01 to 1.0 microg l(-1). As regards the Environmental Quality Standards (EQS), 10 substances or groups of substances were found in surface waters to exhibit concentrations above the annual average value, while only the benzo(a)pyrene concentration exceed the maximum allowable level. As for the Canadian Sediment Quality Guidelines, settleable particles collected in the Seine River appear to be heavily contaminated since most samples contain PP levels above the guideline values (18 PPs) and, in many cases, above the probable effect levels (15 PPs), which underscores that the levels of metals, PAHs and PCBs in settleable particles constitute a potential risk to freshwater organisms.

Priority pollutants in wastewater and combined sewer overflow.

Implementation of the European Water Framework Directive and its affiliated directives requires Member States to improve their understanding of priority pollutants (PPs) in urban areas and obviously within wastewater systems. As a direct consequence, this study is intended to furnish data on both PP occurrence and the significance of concentrations in wastewater during dry and wet periods within combined sewers. Various sampling sites within the Paris combined sewer network were selected; for each sample, a total of 66 determinants, including metals, polycyclic aromatic hydrocarbons (PAHs), pesticides, organotins, volatile organic compounds, chlorobenzenes, phthalates and alkylphenols, were analysed. A broad range of PPs was observed in wastewater during dry as well as wet weather periods. Of the 66 elements investigated, 33 and 40 priority substances could be observed in raw sewage and wet weather effluent, respectively. As expected, a majority of metals were present in all samples, reflecting their ubiquitous nature. For both periods, chlorobenzenes and most of the pesticides always remained below the limit of quantification, while the majority of other organic pollutants assessed were identified within the microg l(-1) range. As highlighted by the larger number of substances detected in wet weather samples and the significance of their concentrations, runoff via atmospheric inputs and/or surface leaching was found to induce a wider range of PPs (n=40) and lead to higher concentrations of certain metals, PAHs, pesticides and other individual compounds. The data generated during this survey, which constitutes one of the first studies conducted in Europe to report concentrations for a variety of priority substances in wastewater within combined sewers, may be used in the future to identify PPs of potential significance for dry and wet weather periods and targeted for further investigation.

Contamination of soils by metals and organic micropollutants: case study of the Parisian conurbation.

Soils are playing a central role in the transfer and accumulation of anthropogenic pollutants in urbanized regions. Hence, this study aimed at examining the contamination levels of selected soils collected within and around the Paris conurbation (France). This also evaluated factors controlling contamination. Twenty-three trace and major elements as well as 82 organic micropollutants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalates (PAEs), polybrominated diphenyl ethers (PBDEs), alkylphenols (APs), and perfluoroalkylated substances (PFASs) were analyzed. Results reinforced the concern raised by the occurrence and levels of metals such as Zn, Pb, Cu, and Hg, identified as metallic markers of anthropogenic activities, but also pointed out the ubiquitous contamination of soils by organic micropollutants in the 0.2-55,000-µg/kg dw range. For well-documented compounds like PAHs, PCBs, and to a lesser extent PBDEs, contents were in the range of background levels worldwide. The pollutant stock in tested soil was compared to the annual atmospheric input. For PAHs; Pb; and to a lesser extent Zn, Cu, Cd, Hg, Sb, PAEs, and APs, a significant stock was observed, far more important than the recent annual atmospheric fluxes. This resulted from both (i) the persistence of a fraction of pollutants in surface soils and (ii) the cumulative atmospheric inputs over several decades. Regarding PBDEs and PFASs, stronger atmospheric input contributions were observed, thereby highlighting their recent dispersal into the environment.