A Comparison between the Cycloadditions of Allenyl- and Vinyl-Cyclopentanes Using Density Functional Theory and GRRM Program.

Cycloaddition catalyzed by transition metals such as rhodium (I) is an important way to synthesize functionalized molecules in medicinal chemistry. When the reagent has a saturated ring containing more than five carbons (or heavy atoms), the reaction can progress when the compound has an allenyl group, but not for a vinyl group. Here, we constructed two computational models for allenylcyclopentane-alkyne and vinylcyclopentane-alkyne, and obtained their reaction pathways using density functional theory (DFT). From the reaction pathways, we confirmed that the former model has a much lower reaction energy than the latter. We also found that the molecular orbitals of the transition state structure at the rate-controlling step contribute significantly to the difference in reactivity between the two models.

Rhodium(I)-Catalyzed Ring-Closing Reaction of Allene-Alkene-Alkynes: One-Step Construction of Tricyclo[6.4.0.02,6 ] and Bicyclo[6.3.0] Skeletons from Linear Carbon Chains.

Treatment of dodecatrienyne derivatives with [RhCl(CO)2 ]2 in refluxing toluene effected the cycloisomerization to produce tricyclo[6.4.0.02,6 ]dodecadienes. The one-carbon shortened undecatrienyne derivatives, however, afforded bicyclo[6.3.0]undecatriene derivatives instead of tricyclic compounds, the latter of which are well known as a basic skeleton of naturally occurring octanoids. On the basis of two experiments with deuterated substrates, a plausible reaction mechanism for the construction of these products was proposed.

Activation of disulfide bond cleavage triggered by hydrophobization and lipophilization of functionalized dihydroasparagusic acid.

Concisely synthesized and functionalized dihydroasparagusic acid (DHAA) derivatives were used to show that the introduction of a hydrophobic functional group dramatically reduced air oxidation activity at the dithiol moieties and dominantly activated the cleavage of S-S bonds in proteins, presumably due to the hydrophobization and lipophilization. Notably, the reaction sites of water-reactive dithiol moieties behaved similarly to hydrophobic and lipophilic functional groups, which suggests impersonation of the reaction site.

Planar Chiral [2.2]Paracyclophane-Based Bisoxazoline Ligands: Design, Synthesis, and Use in Cu-Catalyzed Inter- and Intramolecular Asymmetric O-H Insertion Reactions.

Centrally chiral bisoxazolines connected directly to a planar chiral [2.2]paracyclophane backbone were synthesized and evaluated as asymmetric ligands in Cu-catalyzed intermolecular ethanolic O-H insertion reactions of α-diazo esters. The reactivities and enantioselectivities of Cu complexes of the synthesized bisoxazoline ligands were lower than those of ligands without central chirality. However, planar chiral [2.2]paracyclophane-based bisoxazoline ligands with an inserted benzene spacer that had a sterically demanding isopropyl substituent showed good enantioselectivities in inter- and intramolecular aromatic O-H insertion reactions, without the aid of central chirality.

Rhodium(I)-Catalyzed Cycloisomerization of Homopropargylallene-Alkynes through C(sp3 )-C(sp) Bond Activation.

Upon exposure to a catalytic amount of [RhCl(CO)2 ]2 in 1,4-dioxane, homopropargylallene-alkynes underwent a novel cycloisomerization accompanied by the migration of the alkyne moiety of the homopropargyl functional group to produce six/five/five tricyclic compounds in good yields. A plausible mechanism was proposed on the basis of an experiment with 13 C-labeled substrate. The resulting tricyclic derivatives were further converted into the corresponding bicyclo[3.3.0] skeletons with vicinal cis dihydroxy groups.

CO2-Selective Absorbents in Air: Reverse Lipid Bilayer Structure Forming Neutral Carbamic Acid in Water without Hydration.

Emission gas and air contain not only CO2 but also plentiful moisture, making it difficult to achieve selective CO2 absorption without hydration. To generate absorbed CO2 (wet CO2) under heating, the need for external energy to release the absorbed water has been among the most serious problems in the fields of carbon dioxide capture and storage (CCS) and direct air capture (DAC). We found that the introduction of the hydrophobic phenyl group into alkylamines of CO2 absorbents improved the absorption selectivity between CO2 and water. Furthermore, ortho-, meta-, and para-xylylenediamines (OXDA, MXDA, PXDA, respectively) absorbed only CO2 in air without any hydration. Notably, MXDA·CO2 was formed as an anhydrous carbamic acid even in water, presumably because it was covered with hydrophobic phenyl groups, which induces a reverse lipid bilayer structure. Dry CO2 was obtained from heating MXDA·CO2 at 103-120 °C, which was revealed to involve chemically the Grignard reaction to form the resulting carboxylic acids in high yields.

Mechanistic Investigation of RhI-Catalyzed Cycloisomerization of Benzylallene-Internal Alkynes via C-H Activation.

Treatment of the benzylallene-internal alkynes with [RhCl(CO)2]2 effected a cycloisomerization via a Csp2-H bond activation to produce the tricyclo[9.4.0.03,8]pentadecapentaene skeleton. The reaction mechanism via formation of the rhodabicyclo[4.3.0] intermediates and σ-bond metathesis between the Csp2-H bond on the benzene ring and the Csp2-RhIII bond was proposed. In addition, a plausible alternative mechanism for the previously reported cycloisomerization of the benzylallene-terminal alkynes could also be proposed.

Creation of Novel Cyclization Methods Using sp-Hybridized Carbon Units and Syntheses of Bioactive Compounds.

Some recent results on the development of new and reliable procedures for the construction of diverse ring systems based on the chemistry of sp-hybridized species, especially allene functionality, are described. This review includes: (i) synthesis of the multi-cyclic skeletons by combination of the π-component of allene with suitable other π-components such as alkyne, alkene, or additional allene under Rh-catalyzed conditions; (ii) synthesis of heterocycles as well as carbocycles by reaction of the sp-hybridized center of allene with some nucleophiles in an endo-mode manner; and (iii) total syntheses of natural products and related compounds from the sp-hybridized starting materials.

Substrate Specific Silver(I)-Catalyzed Cycloisomerization of Diene Involving Alkyl Rearrangements: Syntheses of 1,2,5,6-Tetrahydrocuminic Acid, p-Menth-3-en-7-ol, and p-Menth-3-en-7-al.

The novel cationic Ag(I)-catalyzed cycloisomerization, which is associated with alkyl rearrangements, from dimethyl 2-allyl-2-prenylmalonate (1) to dimethyl 4-isopropylcyclohex-3-ene-1,1-dicarboxylate (2) has been developed. Derivatization from the diester 2 into the diol 3 and its X-ray crystallographic analysis determined the structure. The mechanisms of the novel reaction were investigated by isotopic experiments, which supported the unusual alkyl shifts. In addition, the product 2 was used for the total syntheses of three natural products, 1,2,5,6-tetrahydrocuminic acid (12), p-menth-3-en-7-ol (13), and p-menth-3-en-7-al (14) in short steps.

Chemo- and Regioselective Rhodium(I)-Catalyzed [2+2+2] Cycloaddition of Allenynes with Alkynes.

A highly chemo- and regioselective partially intramolecular rhodium(I)-catalyzed [2+2+2] cycloaddition of allenynes with alkynes is described. A range of diverse polysubstituted benzene derivatives could be synthesized in good to excellent yields, in which the allenynes served as synthetic equivalent to the diynes. A high regioselectivity could be observed when allenynes were treated with unsymmetrical alkynes.

The discovery of 2,5-isomers of triazole-pyrrolopyrimidine as selective Janus kinase 2 (JAK2) inhibitors versus JAK1 and JAK3.

Members of the Janus kinase (JAK) family are potential therapeutic targets. Abnormal signaling by mutant JAK2 is related to hematological malignancy, such as myeloproliferative neoplasms (MPNs), and tyrosine kinase inhibitor (TKI)-resistance in non-small cell lung cancer (NSCLC). We discovered a potent and highly selective inhibitor of JAK2 over JAK1 and -3 based on the structure of 4-(2,5-triazole)-pyrrolopyrimidine. Among all triazole compounds tested, 2,5-triazole regioisomers more effectively inhibited JAK2 kinase activity than isomers with substitutions of various alkyl groups at the R2 position, except for methyl-substituted 1,5-triazole, which was more potent than the corresponding 1,4- and 2,5-triazoles. None of the synthesized 1,4-isomers inhibited all three JAK family members. Compounds with phenyl or tolyl group substituents at the R1 position were completely inactive compared with the corresponding analogues with a methyl substituted at the R1 position. As a result of this structure-activity relationship, 54, which is substituted with a cyclopropylmethyl moiety, exhibited significant inhibitory activity and selectivity (IC50=41.9nM, fold selectivity JAK1/2 10.6 and JAK3/2 58.1). Compound 54 also exhibited an equivalent inhibition of wild type JAK2 and the V617F mutant. Moreover, 54 inhibited the proliferation of HEL 92.1.7 cells, which carry JAK2 V617F, and gefitinib-resistant HCC827 cells. Compound 54 also suppressed STAT3 phosphorylation at Y705.

Construction of Azabicyclo[6.4.0]dodecatrienes Based on Rhodium(I)-Catalyzed Intramolecular [6+2] Cycloaddition between Azetidine, Allene, and Alkynes.

Treatment of the allenylazetidine-alkynes with a catalytic amount of [RhCl(CO)dppp]2 (dppp: 1,3-bis(diphenylphosphino)propane) effected the intramolecular hetero-[6+2]-type ring-closing reaction via the C-C bond cleavage of the azetidine ring to produce azabicyclo[6.4.0]dodecatriene derivatives in good to excellent yields. The formation of the oxa analogue could also be achieved.

Energyless CO2 Absorption, Generation, and Fixation Using Atmospheric CO2.

From an economic and ecological perspective, the efficient utilization of atmospheric CO2 as a carbon resource should be a much more important goal than reducing CO2 emissions. However, no strategy to harvest CO2 using atmospheric CO2 at room temperature currently exists, which is presumably due to the extremely low concentration of CO2 in ambient air (approximately 400 ppm=0.04 vol%). We discovered that monoethanolamine (MEA) and its derivatives efficiently absorbed atmospheric CO2 without requiring an energy source. We also found that the absorbed CO2 could be easily liberated with acid. Furthermore, a novel CO2 generator enabled us to synthesize a high value-added material (i.e., 2-oxazolidinone derivatives based on the metal catalyzed CO2-fixation at room temperature) from atmospheric CO2.

Construction of Hexahydrophenanthrenes By Rhodium(I)-Catalyzed Cycloisomerization of Benzylallene-Substituted Internal Alkynes through C-H Activation.

The treatment of benzylallene-substituted internal alkynes with [RhCl(CO)2 ]2 effects a novel cycloisomerization by C(sp(2) )-H bond activation to produce hexahydrophenanthrene derivatives. The reaction likely proceeds through consecutive formation of a rhodabicyclo[4.3.0] intermediate, σ-bond metathesis between the C(sp(2) )-H bond on the benzene ring and the C(sp(2) )-Rh(III) bond, and isomerization between three σ-, π-, and σ-allylrhodium(III) species, which was proposed based on experiments with deuterated substrates.

Synthesis of planar chiral [2.2]paracyclophane-based bisoxazoline ligands bearing no central chirality and application to Cu-catalyzed asymmetric O-H insertion reaction.

C2-symmetric planar chiral [2.2]paracyclophane-based bisoxazoline ligands, characterized by the inserted benzene spacer, which has a sterically demanding substituent, were synthesized and it was shown that up to 80% ee was obtained for the Cu-catalyzed O-H insertion reaction of α-diazo esters without the aid of the central chirality.

Synthesis of a carbon analogue of scytonemin.

The synthesis of a carbon analogue of scytonemin was accomplished on the basis of molybdenum-mediated intramolecular double Pauson-Khand type reaction of bis(allenyne), followed by the double aldol condensation of the formed double Pauson-Khand type adduct.

Air-stable cationic gold(I) catalyst featuring a Z-type ligand: promoting enyne cyclizations.

An air-stable cationic Au(I) complex featuring a Z-type ligand (boron atom) as a σ-acceptor was developed for elucidating the effect of B on catalytic reactions. An enyne cyclization in the presence of either [Au→B](+) or [Au](+) showed that [Au→B](+) promotes the reactivity, which enabled the effective construction of not only five- and six-membered rings, but also seven-membered rings.

Stereospecific and stereoselective rhodium(I)-catalyzed intramolecular [2+2+2] cycloaddition of allene-ene-ynes: construction of bicyclo[4.1.0]heptenes.

Treatment of the allene-ene-yne substrates with [{RhCl(CO)2}2] effected the intramolecular [2+2+2]-type ring-closing reaction to produce various of tri- and tetracyclic derivatives containing a cyclopropane ring. The reaction is highly stereoselective as well as stereospecific with good to excellent yields.

Rh(I)-catalyzed intramolecular carbonylative [2+2+1] cycloaddition reaction: preparation of bicyclo[5.3.0]decadienones with substituted cyclopentenone frameworks.

The [RhCl(CO)2]2-catalyzed [2+2+1] cycloaddition of bis(allene)s, which have a substituent at the allenic terminus, produced the 8-substituted bicyclo[5.3.0]deca-1(10),6-dien-9-one frameworks. The synthesis of 8,10-dimethylbicyclo[5.3.0]deca-1(10),6-dien-9-one could also be achieved from the bis(1,1,3-trisubstituted-allene).

Rhodium(I)-catalyzed cycloisomerization of benzylallene-alkynes through C-H activation.

The efficient Rh(I)-catalyzed cycloisomerization of benzylallene-alkynes produced the tricyclo[9.4.0.0(3,8)]pentadecapentaene skeleton through a C(sp2)-H bond activation in good yields. A plausible reaction mechanism proceeds via oxidative addition of the acetylenic C-H bond to Rh(I), an ene-type cyclization to the vinylidenecarbene-Rh(I) intermediate, and an electrophilic aromatic substitution with the vinylidenecarbene species. It was proposed based on deuteration and competition experiments.