Non-Fourier thermal transport induced structural hierarchy and damage to collagen ultrastructure subjected to laser irradiation.

Comprehending the mechanism of thermal transport through biological tissues is an important factor for optimal ablation of cancerous tissues and minimising collateral tissue damage. The present study reports detailed mapping of the rise in internal temperature within the tissue mimics due to NIR (1064 nm) laser irradiation, both for bare mimics and with gold nanostructures infused. Gold nanostructures such as mesoflowers and nanospheres have been synthesised and used as photothermal converters to enhance the temperature rise, resulting in achieving the desired degradation of malignant tissue in targeted region. Thermal history was observed experimentally and simulated considering non-Fourier dual phase lag (DPL) model incorporated Pennes bio-heat transfer equation using COMSOL Multiphysics software. The gross deviation in temperature i.e. rise from the classical Fourier model for bio-heat conduction suggests additional effects of temperature rise on the secondary structures and morphological and physico-chemical changes to the collagen ultrastructures building the tissue mass. The observed thermal denaturation in the collagen fibril morphologies have been explained based on the physico-chemical structure of collagen and its response to thermal radiation. The large shift in frequency of amides A and B is pronounced at a depth of maximum temperature rise compared with other positions in tissue phantom. Observations for change in band of amide I, amide II, and amide III are found to be responsible for damage to collagen ultra-structure. Variation in the concentration of gold nanostructures shows the potentiality of localised hyperthermia treatment subjected to NIR radiation through a proposed free radical mechanism.

Subsurface thermal behaviour of tissue mimics embedded with large blood vessels during plasmonic photo-thermal therapy.

PURPOSE: The purpose of this study was to understand the subsurface thermal behaviour of a tissue phantom embedded with large blood vessels (LBVs) when exposed to near-infrared (NIR) radiation. The effect of the addition of nanoparticles to irradiated tissue on the thermal sink behaviour of LBVs was also studied. MATERIALS AND METHODS: Experiments were performed on a tissue phantom embedded with a simulated blood vessel of 2.2 mm outer diameter (OD)/1.6 mm inner diameter (ID) with a blood flow rate of 10 mL/min. Type I collagen from bovine tendon and agar gel were used as tissue. Two different nanoparticles, gold mesoflowers (AuMS) and graphene nanostructures, were synthesised and characterised. Energy equations incorporating a laser source term based on multiple scattering theories were solved using finite element-based commercial software. RESULTS: The rise in temperature upon NIR irradiation was seen to vary according to the position of the blood vessel and presence of nanoparticles. While the maximum rise in temperature was about 10 °C for bare tissue, it was 19 °C for tissue embedded with gold nanostructures and 38 °C for graphene-embedded tissues. The axial temperature distribution predicted by computational simulation matched the experimental observations. CONCLUSIONS: A different subsurface temperature distribution has been obtained for different tissue vascular network models. The position of LBVs must be known in order to achieve optimal tissue necrosis. The simulation described here helps in predicting subsurface temperature distributions within tissues during plasmonic photo-thermal therapy so that the risks of damage and complications associated with in vivo experiments and therapy may be avoided.

Analytical prediction of sub-surface thermal history in translucent tissue phantoms during plasmonic photo-thermotherapy (PPTT).

Knowledge of thermal history and/or distribution in biological tissues during laser based hyperthermia is essential to achieve necrosis of tumour/carcinoma cells. A semi-analytical model to predict sub-surface thermal distribution in translucent, soft, tissue mimics has been proposed. The model can accurately predict the spatio-temporal temperature variations along depth and the anomalous thermal behaviour in such media, viz. occurrence of sub-surface temperature peaks. Based on optical and thermal properties, the augmented temperature and shift of the peak positions in case of gold nanostructure mediated tissue phantom hyperthermia can be predicted. Employing inverse approach, the absorption coefficient of nano-graphene infused tissue mimics is determined from the peak temperature and found to provide appreciably accurate predictions along depth. Furthermore, a simplistic, dimensionally consistent correlation to theoretically determine the position of the peak in such media is proposed and found to be consistent with experiments and computations. The model shows promise in predicting thermal distribution induced by lasers in tissues and deduction of therapeutic hyperthermia parameters, thereby assisting clinical procedures by providing a priori estimates.

Temperature evolution in tissues embedded with large blood vessels during photo-thermal heating.

During laser-assisted photo-thermal therapy, the temperature of the heated tissue region must rise to the therapeutic value (e.g., 43°C) for complete ablation of the target cells. Large blood vessels (larger than 500 micron in diameter) at or near the irradiated tissues have a considerable impact on the transient temperature distribution in the tissue. In this study, the cooling effects of large blood vessels on temperature distribution in tissues during laser irradiation are predicted using finite element based simulation. A uniform flow is assumed at the entrance and three-dimensional conjugate heat transfer equations in the tissue region and the blood region are simultaneously solved for different vascular models. A volumetric heat source term based on Beer-Lambert law is introduced into the energy equation to account for laser heating. The heating pattern is taken to depend on the absorption and scattering coefficients of the tissue medium. Experiments are also conducted on tissue mimics in the presence and absence of simulated blood vessels to validate the numerical model. The coupled heat transfer between thermally significant blood vessels and their surrounding tissue for three different tissue-vascular networks are analyzed keeping the laser irradiation constant. A surface temperature map is obtained for different vascular models and for the bare tissue (without blood vessels). The transient temperature distribution is seen to differ according to the nature of the vascular network, blood vessel size, flow rate, laser spot size, laser power and tissue blood perfusion rate. The simulations suggest that the blood flow through large blood vessels in the vicinity of the photothermally heated tissue can lead to inefficient heating of the target.

Evaluation of hemodynamic performance of total cavopulmonary connection (TCPC) with porous inserts.

Infants born with univentricular heart disease undergo Fontan surgery to establish separate systemic and pulmonary circulations. This surgery results in better blood circulation across a single ventricle that supplies oxygenated blood to the body and passively returns venous blood to the lungs through the total cavopulmonary connection (TCPC). Reducing the pressure drop across the TCPC during Fontan circulation helps in reducing the work load of univentricular heart, and various designs have been proposed for this purpose. The goal of this work is to analyze the effect of placing a porous insert at an appropriate position in the pulmonary artery, on the pressure drop across the TCPC. A 3D computational model of a total TCPC connection provided with a porous insert is developed and solved by finite volume method, under assumptions of steady, laminar, and Newtonian flows. The effects of the porous medium properties-porosity and permeability-across the connection, are analyzed. Compared to the no-porous medium case, TCPC with the porous medium insert exhibits a maximum reduction of 27% in energy loss for the flow range studied. The porous medium used in TCPC connection lowers the energy dissipation by curtailing the flow recirculation zones across the connection. The influences of the diameter of the blood vessel, total cardiac output, and the thickness, permeability, and position of porous media on energy loss are analyzed. The criteria to select the porous medium properties and position for a given Fontan geometry are also determined.

Effect of choroidal blood perfusion and natural convection in vitreous humor during transpupillary thermotherapy (TTT).

During retinal surgical treatment often the gel-like vitreous humor is replaced by aqueous substitutes. A two-dimensional computational model is developed for simulating transpupillary thermotherapy (TTT) process in a human eye under post-retinal treatment. The model accounts for natural convection in vitreous humor and the choroidal blood perfusion. Time dependent and steady state forms of Pennes bio heat transfer and the natural convection governing energy equations are solved using finite volume formulation. The results for steady state and at the end of 60 s of the laser irradiated TTT process show that flow in vitreous humor is significant. The velocity contours indicate strong natural convection on the upper half of the vitreous chamber. Compared with the stationary vitreous case, the peak temperature in retina during TTT, drops by 15 K and 12.5 K due to natural convection flow in the vitreous humor under steady and transient states, respectively. The choroidal blood perfusion also reduces the peak retinal temperature by 6 K and 1.5 K in steady state and transient cases, respectively. The vitreous humor convection enhances heat transfer in the regions adjacent to the laser spot. The temperature rise and the associated thermal damage in the neighboring regions resulting from the flow of vitreous humor is presented.

Bio-heat transfer simulation of retinal laser irradiation.

Retinopathy is a surgical process in which maladies of the human eye are treated by laser irradiation. A two-dimensional numerical model of the human eye geometry has been developed to investigate transient thermal effects due to laser radiation. In particular, the influence of choroidal pigmentation and that of choroidal blood convection-parameterized as a function of choroidal blood perfusion-are investigated in detail. The Pennes bio-heat transfer equation is invoked as the governing equation, and finite volume formulation is employed in the numerical method. For a 500-µm diameter spot size, laser power of 0.2 W, and 100% absorption of laser radiation in the retinal pigmented epithelium (RPE) region, the peak RPE temperature is observed to be 103 °C at 100 ms of the transient simulation of the laser surgical period. Because of the participation of pigmented layer of choroid in laser absorption, peak temperature is reduced to 94 °C after 100 ms of the laser surgery period. The effect of choroidal blood perfusion on retinal cooling is found to be negligible during transient simulation of retinopathy. A truncated three-dimensional model incorporating multiple laser irradiation of spots is also developed to observe the spatial effect of choroidal blood perfusion and choroidal pigmentation. For a circular array of seven uniformly distributed spots of identical diameter and laser power of 0.2 W, transient temperature evolution using simultaneous and sequential mode of laser surgical process is presented with analysis.