Silicon Radical-Induced CH4 Dissociation for Uniform Graphene Coating on Silica Surface.

Due to the manufacturability of highly well-defined structures and wide-range versatility in its microstructure, SiO2 is an attractive template for synthesizing graphene frameworks with the desired pore structure. However, its intrinsic inertness constrains the graphene formation via methane chemical vapor deposition. This work overcomes this challenge by successfully achieving uniform graphene coating on a trimethylsilyl-modified SiO2 (denote TMS-MPS). Remarkably, the onset temperature for graphene growth dropped to 720 °C for the TMS-MPS, as compared to the 885 °C of the pristine SiO2. This is found to be mainly from the Si radicals formed from the decomposition of the surface TMS groups. Both experimental and computational results suggest a strong catalytic effect of the Si radicals on the CH4 dissociation. The surface engineering of SiO2 templates facilitates the synthesis of high-quality graphene sheets. As a result, the graphene-coated SiO2 composite exhibits a high electrical conductivity of 0.25 S cm-1. Moreover, the removal of the TMP-MPS template has released a graphene framework that replicates the parental TMS-MPS template on both micro- and nano- scales. This study provides tremendous insights into graphene growth chemistries as well as establishes a promising methodology for synthesizing graphene-based materials with pre-designed microstructures and porosity.

Probing Basal and Prismatic Planes of Graphitic Materials for Metal Single Atom and Subnanometer Cluster Stabilization.

Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon-supported single atom catalysts focused on nitrogen-doped carbons, which, unlike classic carbon materials, have a fairly well-defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting-edge analytical methods.

Stereolithography 3D Printed Carbon Microlattices with Hierarchical Porosity for Structural and Functional Applications.

Hierarchically porous carbon microlattices (HPCMLs) fabricated by using a composite photoresin and stereolithography (SLA) 3D printing is reported. Containing magnesium oxide nanoparticles (MgO NPs) as porogens and multilayer graphene nanosheets as UV-scattering inhibitors, the composite photoresin is formed to simple cubic microlattices with digitally designed porosity of 50%. After carbonization in vacuum at 1000 °C and chemical removal of MgO NPs, it is realized that carbon microlattices possessing hierarchical porosity are composed of the lattice architecture (≈100 µm), macropores (≈5 µm), mesopores (≈50 nm), and micropores (≈1 nm). The linear shrinkage after pyrolysis is as small as 33%. Compressive strength of 7.45 to 10.45 MPa and Young's modulus of 375 to 736 MPa are achieved, proving HPCMLs a robust mechanical component among reported carbon materials with a random pore structure. Having a few millimeters in thickness, the HPCMLs can serve as thick supercapacitor electrodes that demonstrate gravimetric capacitances 105 and 13.8 F g-1 in aqueous and organic electrolyte, reaching footprint areal capacitances beyond 10 and 1 F cm-2 , respectively. The results present that the composite photoresin for SLA can yield carbon microarchitectures that integrate structural and functional properties for structural energy storages .

Prominent Structural Dependence of Quantum Capacitance Unraveled by Nitrogen-Doped Graphene Mesosponge.

Porous carbons are important electrode materials for supercapacitors. One of the challenges associated with supercapacitors is improving their energy density without relying on pseudocapacitance, which is based on fast redox reactions that often shorten device lifetimes. A possible solution involves achieving high total capacitance (Ctot ), which comprises Helmholtz capacitance (CH ) and possibly quantum capacitance (CQ ), in high-surface carbon materials comprising minimally stacked graphene walls. In this work, a templating method is used to synthesize 3D mesoporous graphenes with largely identical pore structures (≈2100 m2 g-1 with an average pore size of ≈7 nm) but different concentrations of oxygen-containing functional groups (0.3-6.7 wt.%) and nitrogen dopants (0.1-4.5 wt.%). Thus, the impact of the heteroatom functionalities on Ctot is systematically investigated in an organic electrolyte excluding the effect of pore structures. It is found that heteroatom functionalities determine Ctot , resulting in the cyclic voltammetry curves being rectangular or butterfly-shaped. The nitrogen functionalities are found to significantly enhance Ctot owing to increased CQ .

Water-Dispersible Carbon Nano-Test Tubes as a Container for Concentrated DNA Molecules.

Invited for the cover of this issue are Takashi Kyotani, Tetsuji Itoh and co-workers at Tohoku University, Gunma University and AIST. The image depicts the synthesis of water-dispersible carbon nano-test tubes by using a template technique and the selective adsorption of DNA into the inner space of these test tubes. Read the full text of the article at 10.1002/chem.202301422.

Water-Dispersible Carbon Nano-Test Tubes as a Container for Concentrated DNA Molecules.

Water-dispersible carbon nano-test tubes (CNTTs) with an inner and outer diameter of about 25 and 35 nm, respectively, were prepared by the template technique and then their inner carbon surface was selectively oxidized to introduce carboxy groups. The adsorption behavior of DNA molecules on the oxidized CNTTs (Ox-CNTTs) was examined in the presence of Ca2+ cations. Many DNA molecules are attracted to the inner space of Ox-CNTTs based on the Ca2+ -mediated electrostatic interaction between DNA phosphate groups and carboxylate anions on the inner carbon surface. Moreover, the total net charge of the DNA adsorbed was found to be equal to the total charge of the carboxylate anions. This selective adsorption into the interior of Ox-CNTTs can be explained from the fact that the electrostatic interaction onto the inner concave surface is much stronger than that on the outer convex surface. On the other hand, the desorption of DNA easily occurs whenever Ca2+ cations are removed by washing with deionized water. Thus, each of Ox-CNTTs works well as a nano-container for a large amount of DNA molecules, thereby resulting in the occurrence of DNA enrichment in the nanospace.

The carbon chain growth during the onset of CVD graphene formation on γ-Al2O3 is promoted by unsaturated CH2 ends.

Chemical vapor deposition of methane onto a template of alumina (Al2O3) nanoparticles is a prominent synthetic strategy of graphene meso-sponge, a new class of nano porous carbon materials consisting of single-layer graphene walls. However, the elementary steps controlling the early stages of graphene growth on Al2O3 surfaces are still not well understood. In this study, density functional theory calculations provide insights into the initial stages of graphene growth. We have modelled the mechanism of CH4 dissociation on the (111), (110), (100), and (001) γ-Al2O3 surfaces. Subsequently, we have considered the reaction pathway leading to the formation of a C6 ring. The γ-Al2O3(110) and γ-Al2O3(100) are both active for CH4 dissociation, but the (100) surface has higher catalytic activity towards the carbon growth reaction. The overall mechanism involves the formation of the reactive intermediate CH2* that then can couple to form CnH2n* (n = 2-6) intermediates with unsaturated CH2 ends. The formation of these species, which are not bound to the surface-active sites, promotes the sustained carbon growth in a nearly barrierless process. Also, the short distance between terminal carbon atoms leads to strong interactions, which might lead to the high activity between unsaturated CH2* of the hydrocarbon chain. Analysis of the electron localization and geometries of the carbon chains reveals the formation of C-Al-σ bonds with the chain growing towards the vacuum rather than C-Al-π bonds covering the γ-Al2O3(100) surface. This growth behaviour prevents catalyst poisoning during the initial stage of graphene nucleation.

pH-Dependent Morphology Control of Cellulose Nanofiber/Graphene Oxide Cryogels.

The precise control of the ice crystal growth during a freezing process is of essential importance for achieving porous cryogels with desired architectures. The present work reports a systematic study on the achievement of multi-structural cryogels from a binary dispersion containing 50 wt% 2,2,6,6-tetramethylpiperidin-1-oxyl, radical-mediated oxidized cellulose nanofibers (TOCNs), and 50 wt% graphene oxide (GO) via the unidirectional freeze-drying (UDF) approach. It is found that the increase in the sol's pH imparts better dispersion of the two components through increased electrostatic repulsion, while also causing progressively weaker gel networks leading to micro-lamella cryogels from the UDF process. At the pH of 5.2, an optimum between TOCN and GO self-aggregation and dispersion is achieved, leading to the strongest TOCN-GO interactions and their templating into the regular micro-honeycomb structures. A two-faceted mechanism for explaining the cryogel formation is proposed and it is shown that the interplay of the maximized TOCN-GO interactions and the high affinity of the dispersoid complexes for the ice crystals are necessary for obtaining a micro-honeycomb morphology along the freezing direction. Further, by linking the microstructure and rheology of the corresponding precursor sols, a diagram for predicting the microstructure of TOCN-GO cryogels obtained through the UDF process is proposed.

Quantifying Carbon Edge Sites on Depressing Hydrogen Evolution Reaction Activity.

To understand the effect of microstructural characteristics of carbon materials on their electrochemical or electrocatalytic performance, an in-depth study of the edges in carbon materials should be carried out. In this study, catalytically grown platelet-type carbon nanofibers (CNFs) with fully exposed edges were physically and chemically passivated to clarify the relationship between the edge density and the hydrogen evolution reaction (HER) activity. Due to the aligned structure along the fiber axis, the edges on the outer surface of the CNFs were easily modified without using a complex process. The edges on the surface of the CNFs were inactivated by sequentially forming single, double, and multiple loops as the heat treatment temperatures increased. The number of edges within the CNFs was quantitatively measured using temperature-programmed desorption (TPD) up to 1800 °C. The surviving edges on the surface of thermally treated CNFs were identified by chemical functionalization via an amination reaction. We identified a close relationship between the HER activity and the edge density. When evaluating the electrochemical and electrocatalytic activity of carbon materials, it is important to know the portion of the edge surface area with respect to the total surface area and edge ratio.

A Directional Strain Sensor Based on Anisotropic Microhoneycomb Cellulose Nanofiber-Carbon Nanotube Hybrid Aerogels Prepared by Unidirectional Freeze Drying.

Aerogels are one of the most popular composite reinforcement materials because of their high porosity and their continuous and homogeneous network. Most aerogels are isotropic, thus leading to isotropic composites when they are used as fillers. This fundamentally limits their applications in areas where anisotropy is needed. Here, an anisotropic microhoneycomb cellulose nanofiber- (CellF)-carbon nanotube (CNT) aerogel (denoted MCCA) is reported that contains unidirectionally aligned penetrating microchannels, which is prepared by a unidirectional freeze-drying method, using the structure-directing function of the CellFs. Due to its anisotropic nature, MCCA-reinforced polydimethylsilexane (denoted MCCA/PDMS) shows distinct anisotropic behavior, with the electrical conductivity and Young's modulus along the direction of penetrating microchannels being approximately twice those in the orthogonal direction. MCCA/PDMS is used to make "directional" strain sensors with electrical resistance as the output signal. They demonstrate a 92% sensitivity difference between the microchannel direction and its orthogonal direction. This approach can be used to prepare anisotropic MCCA-based composites with other polymers for different applications.

Microsphere Assemblies via Phosphonate Monoester Coordination Chemistry.

By complexing a bent phosphonate monoester ligand with cobalt(II), coupled with in situ ester hydrolysis, coordination microspheres (CALS=CALgary Sphere) are formed whereas the use of the phosphonic acid directly resulted in a sheet-like structure. Manipulation of the synthetic conditions gave spheres with different sizes, mechanical stabilities, and porosities. Time-dependent studies determined that the sphere formation likely occurred through the formation of a Co2+ and ligand chain that propagates in three dimensions through different sets of interactions. The relative rates of these assembly processes versus annealing by ester hydrolysis and metal dehydration determine the growth of the microspheres. Hardness testing by nanoindentation is carried out on the spheres and sheets. Notably, no templates or capping agents are employed, the growth of the spheres is intrinsic to the ligand geometry and the coordination chemistry of cobalt(II) and the phosphonate monoester.

Structural Coloration of a Colloidal Amorphous Array is Intensified by Carbon Nanolayers.

In this study, we introduce the possibility of applying a colloidal amorphous array composed of fine silica particles as a structural-color material to invisible information technology. The appearance of a thick filmlike colloidal amorphous array formed from fine silica particles is considerably influenced by incoherent light scattering across the entire visible region. Therefore, regardless of the diameter of the fine silica particles, the thick colloidal amorphous array exhibits a white color to the naked eye. When carbon is uniformly deposited in the colloidal amorphous array by a pressure-pulsed chemical vapor deposition method, incoherent light scattering in the colloidal amorphous array is suppressed. As a result, coherent light scattering due to the short-range order in the colloidal amorphous array becomes conspicuous and the array exhibits a vivid structural color. As structures, such as letters and pictures, can be drawn using this technology, the colloidal amorphous array as a structural-colored material may also be applicable for invisible information technology.

Effect of Heteroatoms in Ordered Microporous Carbons on Their Electrochemical Capacitance.

Micropores play a more important role in enhancing the electrochemical capacitance than mesopores and macropores; therefore, the effect of heteroatom doping into micropores on the electrochemical behavior is interesting. However, heteroatom doping into porous carbon materials would potentially change their pore structures and pore sizes, which also affect their electrochemical capacitive behaviors. To gain insight into the intrinsic effects of heteroatoms on the electrochemical capacitive behaviors, zeolite-templated carbon (ZTC) may be the most suitable candidate. ZTC is an ordered microporous carbon with a uniform micropore size of 1.2 nm, a high surface area, and a large micropore volume. In this work, a series of ZTCs containing oxygen, nitrogen, or boron as heteroatoms, with an ordered pore structure and the same pore size, are prepared. By examining their electrochemical capacitive behaviors in an organic electrolyte, the effect of heteroatom doping can be isolated and discussed without considering the effects of pore structure and pore size. Acid anhydride groups are found to generate pseudocapacitance in two potential ranges, -1.0 to -0.3 V (vs Ag/AgClO4) and -0.2 to 0.4 V. B is introduced into the ZTC framework solely as -B(OH)2, which is found to be an electrochemically inert species. N is introduced as pyridine (3.0%), pyridone/pyrrole (23.8%), quaternary (66.6%), and oxidized N (6.6%), and these species exhibit noticeable pseudocapacitance in the microporous carbon.

Formation of Foam-like Microstructural Carbon Material by Carbonization of Porous Coordination Polymers through a Ligand-Assisted Foaming Process.

Porous carbon material with a foam-like microstructure has been synthesized by direct carbonization of porous coordination polymer (PCP). In situ generation of foaming agents by chemical reactions of ligands in PCP during carbonization provides a simple way to create lightweight carbon material with a foam-like microstructure. Among several substituents investigated, the nitro group has been shown to be the key to obtain the unique foam-like microstructure, which is due to the fast kinetics of gas evolution during carbonization. Foam-like microstructural carbon materials showed higher pore volume and specific capacitance compared to a microporous carbon.

Porous Carbon Fibers Containing Pores with Sizes Controlled at the Ångstrom Level by the Cavity Size of Pillar[6]arene.

We report a new synthesis method of fibrous carbon material with pores sizes that are precisely controlled at the Ångstrom level, by carbonization of two dimensional (2D) porous sheets of pillar[6]arenes. The 2D porous sheets were prepared by 2D supramolecular polymerization induced by oxidation of hydroquinone units of pillar[6]arenes. Owing to the hexagonal structure of pillar[6]arene, the assembly induced by 2D supramolecular polymerization gave hexagonal 2D porous sheets, and the highly ordered structure of the 2D porous sheets formed regular fibrous structures. Then, carbonization of the 2D porous sheets afforded fibrous carbon materials with micropores. The micropore size of the fibrous porous carbon prepared from pillar[6]arene was the same size as that of the starting material pillar[6]arene assembly.

Photocatalytic performance of TiO2-zeolite templated carbon composites in organic contaminant degradation.

TiO2 composites with zeolite templated carbon (TiO2-ZTC) and activated carbon (TiO2-AC) were prepared and used as the photocatalysts for comparative studies with pure TiO2. TiO2-ZTC exhibited the highest rate of methylene blue degradation with a rate approximately 4 and 400 times higher than those of TiO2-AC and pure TiO2, respectively. Moreover, the highest catalytic performance of TiO2-ZTC in gas-phase degradation of acetone was approximately 1.1 and 12.9 times higher than TiO2-AC and pure TiO2, respectively. These outstanding performances could be attributed to high surface area, pore volume, and hydrophobic surface properties, leading to improvement in the adsorption properties of organic molecules.

Unveiling Carbon Cluster Coating in Graphene CVD on MgO: Combining Machine Learning Force field and DFT Modeling.

In this study, we investigate the behavior of carbon clusters (Cn, where n ranges from 16 to 26) supported on the surface of MgO. We consider the impact of doping with common impurities (such as Si, Mn, Ca, Fe, and Al) that are typically found in ores. Our approach combines density functional theory calculations with machine learning force field molecular dynamics simulations. It is found that the C21 cluster, featuring a core-shell structure composed of three pentagons isolated by three hexagons, demonstrates exceptional stability on the MgO surface and behaves as an "enhanced binding agent" on MgO-doped surfaces. The molecular dynamics trajectories reveal that the stable C21 coating on the MgO surface exhibits less mobility compared to other sizes Cn clusters and the flexible graphene layer on MgO. Furthermore, this stability persists even at temperatures up to 1100K. The analysis of the electron localization function and potential function of Cn on MgO reveals the high localization electron density between the central carbon of the C21 ring and the MgO surface. This work proposes that the C21 island serves as a superstable and less mobile precursor coating on MgO surfaces. This explanation sheds light on the experimental defects observed in graphene products, which can be attributed to the reduced mobility of carbon islands on a substrate that remains frozen and unchanged.

Unlocking the chemical environment of nitrogen in perovskite-type oxides.

Nitrogen (N) doping of perovskite-type oxides is an effective method for enhancing their photocatalytic performance. Quantitative and qualitative analyses of the doped N species are essential for a deeper understanding of the catalytic activity enhancement mechanism. However, examining the N environment in perovskite-type oxides, particularly in the bulk, using conventional analytical techniques, such as X-ray photoelectron spectroscopy (XPS), is challenging. In this study, we propose a new analytical technique, advanced temperature-programmed desorption (TPD) up to 1600 °C, to complement the conventional methods. TPD can quantify all N species in bulk oxides. Moreover, it facilitates chemical speciation of N environments, such as substitutional and interstitial N species. This is verified by XPS, CHN elemental analysis, X-ray absorption spectroscopy, and in situ diffuse reflectance infrared Fourier-transform spectroscopy. This study demonstrates the feasibility of advanced TPD as a new analytical method that offers comprehensive information on the N species within N-doped oxide materials at the bulk level.

Ordered Carbonaceous Framework Synthesized from Hexaazatrinaphthylene with Enediyne Groups via Solid-State Bergman Cyclization Reaction.

Porous materials synthesized through bottom-up approaches, such as metal-organic frameworks and covalent organic frameworks, have attracted attention owing to their design flexibility for functional materials. However, achieving the chemical and thermal stability of these materials for various applications is challenging considering the reversible coordination bonds and irreversible covalent bonds in their frameworks. Thus, ordered carbonaceous frameworks (OCFs) emerge as a promising class of bottom-up materials with good periodicity, thermal and chemical stability, and electrical conductivity. However, a few OCFs have been reported owing to the limited range of precursor molecules. Herein, we designed a hexaazatrinaphthylene-based molecule with enediyne groups as a precursor molecule for synthesizing an OCF. The solid-state Bergman cyclization of enediyne groups at a low temperature formed a microporous polymer and an OCF, exhibiting redox activity and demonstrating their potential for electrochemical applications. The microporous polymer was used as an active material in sodium-ion batteries, while the OCF was used as an electrochemical capacitor. These findings illustrate the utility of the Bergman cyclization reaction for synthesizing microporous polymers and OCFs with a customizable functionality for broad applications.

Highly Permeable and Regenerative Microhoneycomb Filters.

Allergic reactions can profoundly influence the quality of life. To address the health risks posed by allergens and overcome the permeability limitations of the current filter materials, this work introduces a novel microhoneycomb (MH) material for practical filter applications such as masks. Through a synthesis process integrating ice-templating and a gas-phase post-treatment with silane, MH achieves unprecedented levels of moisture resistance and mechanical stability while preserving the highly permeable microchannels. Notably, MH is extremely elastic, with a 92% recovery rate after being compressed to 80% deformation. The filtration efficiency surpasses 98.1% against pollutant particles that simulate airborne pollens, outperforming commercial counterparts with fifth-fold greater air permeability while ensuring unparalleled user comfort. Moreover, MH offers a sustainable solution, being easily regenerated through back-flow blowing, distinguishing it from conventional nonwoven fabrics. Finally, a prototype mask incorporating MH is presented, demonstrating its immense potential as a high-performance filtration material, effectively addressing health risks posed by allergens and other harmful particles.