A tissue-like neurotransmitter sensor for the brain and gut.

Neurotransmitters play essential roles in regulating neural circuit dynamics both in the central nervous system as well as at the peripheral, including the gastrointestinal tract1-3. Their real-time monitoring will offer critical information for understanding neural function and diagnosing disease1-3. However, bioelectronic tools to monitor the dynamics of neurotransmitters in vivo, especially in the enteric nervous systems, are underdeveloped. This is mainly owing to the limited availability of biosensing tools that are capable of examining soft, complex and actively moving organs. Here we introduce a tissue-mimicking, stretchable, neurochemical biological interface termed NeuroString, which is prepared by laser patterning of a metal-complexed polyimide into an interconnected graphene/nanoparticle network embedded in an elastomer. NeuroString sensors allow chronic in vivo real-time, multichannel and multiplexed monoamine sensing in the brain of behaving mouse, as well as measuring serotonin dynamics in the gut without undesired stimulations and perturbing peristaltic movements. The described elastic and conformable biosensing interface has broad potential for studying the impact of neurotransmitters on gut microbes, brain-gut communication and may ultimately be extended to biomolecular sensing in other soft organs across the body.

High-brightness all-polymer stretchable LED with charge-trapping dilution.

Next-generation light-emitting displays on skin should be soft, stretchable and bright1-7. Previously reported stretchable light-emitting devices were mostly based on inorganic nanomaterials, such as light-emitting capacitors, quantum dots or perovskites6-11. They either require high operating voltage or have limited stretchability and brightness, resolution or robustness under strain. On the other hand, intrinsically stretchable polymer materials hold the promise of good strain tolerance12,13. However, realizing high brightness remains a grand challenge for intrinsically stretchable light-emitting diodes. Here we report a material design strategy and fabrication processes to achieve stretchable all-polymer-based light-emitting diodes with high brightness (about 7,450 candela per square metre), current efficiency (about 5.3 candela per ampere) and stretchability (about 100 per cent strain). We fabricate stretchable all-polymer light-emitting diodes coloured red, green and blue, achieving both on-skin wireless powering and real-time displaying of pulse signals. This work signifies a considerable advancement towards high-performance stretchable displays.

High-frequency and intrinsically stretchable polymer diodes.

Skin-like intrinsically stretchable soft electronic devices are essential to realize next-generation remote and preventative medicine for advanced personal healthcare1-4. The recent development of intrinsically stretchable conductors and semiconductors has enabled highly mechanically robust and skin-conformable electronic circuits or optoelectronic devices2,5-10. However, their operating frequencies have been limited to less than 100 hertz, which is much lower than that required for many applications. Here we report intrinsically stretchable diodes-based on stretchable organic and nanomaterials-capable of operating at a frequency as high as 13.56 megahertz. This operating frequency is high enough for the wireless operation of soft sensors and electrochromic display pixels using radiofrequency identification in which the base-carrier frequency is 6.78 megahertz or 13.56 megahertz. This was achieved through a combination of rational material design and device engineering. Specifically, we developed a stretchable anode, cathode, semiconductor and current collector that can satisfy the strict requirements for high-frequency operation. Finally, we show the operational feasibility of our diode by integrating it with a stretchable sensor, electrochromic display pixel and antenna to realize a stretchable wireless tag. This work is an important step towards enabling enhanced functionalities and capabilities for skin-like wearable electronics.

Skin electronics from scalable fabrication of an intrinsically stretchable transistor array.

Skin-like electronics that can adhere seamlessly to human skin or within the body are highly desirable for applications such as health monitoring, medical treatment, medical implants and biological studies, and for technologies that include human-machine interfaces, soft robotics and augmented reality. Rendering such electronics soft and stretchable-like human skin-would make them more comfortable to wear, and, through increased contact area, would greatly enhance the fidelity of signals acquired from the skin. Structural engineering of rigid inorganic and organic devices has enabled circuit-level stretchability, but this requires sophisticated fabrication techniques and usually suffers from reduced densities of devices within an array. We reasoned that the desired parameters, such as higher mechanical deformability and robustness, improved skin compatibility and higher device density, could be provided by using intrinsically stretchable polymer materials instead. However, the production of intrinsically stretchable materials and devices is still largely in its infancy: such materials have been reported, but functional, intrinsically stretchable electronics have yet to be demonstrated owing to the lack of a scalable fabrication technology. Here we describe a fabrication process that enables high yield and uniformity from a variety of intrinsically stretchable electronic polymers. We demonstrate an intrinsically stretchable polymer transistor array with an unprecedented device density of 347 transistors per square centimetre. The transistors have an average charge-carrier mobility comparable to that of amorphous silicon, varying only slightly (within one order of magnitude) when subjected to 100 per cent strain for 1,000 cycles, without current-voltage hysteresis. Our transistor arrays thus constitute intrinsically stretchable skin electronics, and include an active matrix for sensory arrays, as well as analogue and digital circuit elements. Our process offers a general platform for incorporating other intrinsically stretchable polymer materials, enabling the fabrication of next-generation stretchable skin electronic devices.

A bioinspired stretchable membrane-based compliance sensor.

Compliance sensation is a unique feature of the human skin that electronic devices could not mimic via compact and thin form-factor devices. Due to the complex nature of the sensing mechanism, up to now, only high-precision or bulky handheld devices have been used to measure compliance of materials. This also prevents the development of electronic skin that is fully capable of mimicking human skin. Here, we developed a thin sensor that consists of a strain sensor coupled to a pressure sensor and is capable of identifying compliance of touched materials. The sensor can be easily integrated into robotic systems due to its small form factor. Results showed that the sensor is capable of classifying compliance of materials with high sensitivity allowing materials with various compliance to be identified. We integrated the sensor to a robotic finger to demonstrate the capability of the sensor for robotics. Further, the arrayed sensor configuration allows a compliance mapping which can enable humanlike sensations to robotic systems when grasping objects composed of multiple materials of varying compliance. These highly tunable sensors enable robotic systems to handle more advanced and complicated tasks such as classifying touched materials.

Piezoelectricity of single-atomic-layer MoS2 for energy conversion and piezotronics.

The piezoelectric characteristics of nanowires, thin films and bulk crystals have been closely studied for potential applications in sensors, transducers, energy conversion and electronics. With their high crystallinity and ability to withstand enormous strain, two-dimensional materials are of great interest as high-performance piezoelectric materials. Monolayer MoS2 is predicted to be strongly piezoelectric, an effect that disappears in the bulk owing to the opposite orientations of adjacent atomic layers. Here we report the first experimental study of the piezoelectric properties of two-dimensional MoS2 and show that cyclic stretching and releasing of thin MoS2 flakes with an odd number of atomic layers produces oscillating piezoelectric voltage and current outputs, whereas no output is observed for flakes with an even number of layers. A single monolayer flake strained by 0.53% generates a peak output of 15 mV and 20 pA, corresponding to a power density of 2 mW m(-2) and a 5.08% mechanical-to-electrical energy conversion efficiency. In agreement with theoretical predictions, the output increases with decreasing thickness and reverses sign when the strain direction is rotated by 90°. Transport measurements show a strong piezotronic effect in single-layer MoS2, but not in bilayer and bulk MoS2. The coupling between piezoelectricity and semiconducting properties in two-dimensional nanomaterials may enable the development of applications in powering nanodevices, adaptive bioprobes and tunable/stretchable electronics/optoelectronics.

Quadruple H-Bonding Cross-Linked Supramolecular Polymeric Materials as Substrates for Stretchable, Antitearing, and Self-Healable Thin Film Electrodes.

Herein, we report a de novo chemical design of supramolecular polymer materials (SPMs-1-3) by condensation polymerization, consisting of (i) soft polymeric chains (polytetramethylene glycol and tetraethylene glycol) and (ii) strong and reversible quadruple H-bonding cross-linkers (from 0 to 30 mol %). The former contributes to the formation of the soft domain of the SPMs, and the latter furnishes the SPMs with desirable mechanical properties, thereby producing soft, stretchable, yet tough elastomers. The resulting SPM-2 was observed to be highly stretchable (up to 17 000% strain), tough (fracture energy ∼30 000 J/m2), and self-healing, which are highly desirable properties and are superior to previously reported elastomers and tough hydrogels. Furthermore, a gold, thin film electrode deposited on this SPM substrate retains its conductivity and combines high stretchability (∼400%), fracture/notch insensitivity, self-healing, and good interfacial adhesion with the gold film. Again, these properties are all highly complementary to commonly used polydimethylsiloxane-based thin film metal electrodes. Last, we proceed to demonstrate the practical utility of our fabricated electrode via both in vivo and in vitro measurements of electromyography signals. This fundamental understanding obtained from the investigation of these SPMs will facilitate the progress of intelligent soft materials and flexible electronics.

Manipulating nanoscale contact electrification by an applied electric field.

Contact electrification is about the charge transfer between the surfaces of two materials in a contact-separation process. This effect has been widely utilized in particle separation and energy harvesting, where the charge transfer is preferred to be maximized. However, this effect is always undesirable in some areas such as electronic circuit systems due to the damage from the accumulated electrostatic charges. Herein, we introduced an approach to purposely manipulate the contact electrification process both in polarity and magnitude of the charge transfer through an applied electric field between two materials. Theoretical modeling and the corresponding experiments for controlling the charge transfer between a Pt coated atomic force microscopy tip and Parylene film have been demonstrated. The modulation effect of the electric field on contact electrification is enhanced for a thinner dielectric layer. This work can potentially be utilized to enhance the output performance of energy harvesting devices or nullify contact electric charge transfer in applications where this effect is undesirable.

Topographically-designed triboelectric nanogenerator via block copolymer self-assembly.

Herein, we report a facile and robust route to nanoscale tunable triboelectric energy harvesters realized by the formation of highly functional and controllable nanostructures via block copolymer (BCP) self-assembly. Our strategy is based on the incorporation of various silica nanostructures derived from the self-assembly of BCPs to enhance the characteristics of triboelectric nanogenerators (TENGs) by modulating the contact-surface area and the frictional force. Our simulation data also confirm that the nanoarchitectured morphologies are effective for triboelectric generation.

Sliding-triboelectric nanogenerators based on in-plane charge-separation mechanism.

Aiming at harvesting ambient mechanical energy for self-powered systems, triboelectric nanogenerators (TENGs) have been recently developed as a highly efficient, cost-effective and robust approach to generate electricity from mechanical movements and vibrations on the basis of the coupling between triboelectrification and electrostatic induction. However, all of the previously demonstrated TENGs are based on vertical separation of triboelectric-charged planes, which requires sophisticated device structures to ensure enough resilience for the charge separation, otherwise there is no output current. In this paper, we demonstrated a newly designed TENG based on an in-plane charge separation process using the relative sliding between two contacting surfaces. Using Polyamide 6,6 (Nylon) and polytetrafluoroethylene (PTFE) films with surface etched nanowires, the two polymers at the opposite ends of the triboelectric series, the newly invented TENG produces an open-circuit voltage up to ~1300 V and a short-circuit current density of 4.1 mA/m(2) with a peak power density of 5.3 W/m(2), which can be used as a direct power source for instantaneously driving hundreds of serially connected light-emitting diodes (LEDs). The working principle and the relationships between electrical outputs and the sliding motion are fully elaborated and systematically studied, providing a new mode of TENGs with diverse applications. Compared to the existing vertical-touching based TENGs, this planar-sliding TENG has a high efficiency, easy fabrication, and suitability for many types of mechanical triggering. Furthermore, with the relationship between the electrical output and the sliding motion being calibrated, the sliding-based TENG could potentially be used as a self-powered displacement/speed/acceleration sensor.

Temperature dependence of the piezotronic effect in ZnO nanowires.

A comprehensive investigation was carried out on n-type ZnO nanowires for studying the temperature dependence of the piezotronic effect from 77 to 300 K. In general, lowering the temperature results in a largely enhanced piezotronic effect. The experimental results show that the behaviors can be divided into three groups depending on the carrier doping level or conductivity of the ZnO nanowires. For nanowires with a low carrier density (<10(17)/cm(3) at 77 K), the pieozotronic effect is dominant at low temperature for dictating the transport properties of the nanowires; an opposite change of Schottky barrier heights at the two contacts as a function of temperature at a fixed strain was observed for the first time. At a moderate doping (between 10(17)/cm(3) and 10(18)/cm(3) at 77 K), the piezotronic effect is only dominant at one contact, because the screening effect of the carriers to the positive piezoelectric polarization charges at the other end (for n-type semiconductors). For nanowires with a high density of carriers (>10(18)/cm(3) at 77 K), the piezotronic effect almost vanishes. This study not only proves the proposed fundamental mechanism of piezotronic effect, but also provides guidance for fabricating piezotronic devices.

Segmentally structured disk triboelectric nanogenerator for harvesting rotational mechanical energy.

We introduce an innovative design of a disk triboelectric nanogenerator (TENG) with segmental structures for harvesting rotational mechanical energy. Based on a cyclic in-plane charge separation between the segments that have distinct triboelectric polarities, the disk TENG generates electricity with unique characteristics, which have been studied by conjunction of experimental results with finite element calculations. The role played by the segmentation number is studied for maximizing output. A distinct relationship between the rotation speed and the electrical output has been thoroughly investigated, which not only shows power enhancement at high speed but also illuminates its potential application as a self-powered angular speed sensor. Owing to the nonintermittent and ultrafast rotation-induced charge transfer, the disk TENG has been demonstrated as an efficient power source for instantaneously or even continuously driving electronic devices and/or charging an energy storage unit. This work presents a novel working mode of TENGs and opens up many potential applications of nanogenerators for harvesting even large-scale energy.

Active biointegrated living electronics for managing inflammation.

Seamless interfaces between electronic devices and biological tissues stand to revolutionize disease diagnosis and treatment. However, biological and biomechanical disparities between synthetic materials and living tissues present challenges at bioelectrical signal transduction interfaces. We introduce the active biointegrated living electronics (ABLE) platform, encompassing capabilities across the biogenic, biomechanical, and bioelectrical properties simultaneously. The living biointerface, comprising a bioelectronics layout and a Staphylococcus epidermidis-laden hydrogel composite, enables multimodal signal transduction at the microbial-mammalian nexus. The extracellular components of the living hydrogels, prepared through thermal release of naturally occurring amylose polymer chains, are viscoelastic, capable of sustaining the bacteria with high viability. Through electrophysiological recordings and wireless probing of skin electrical impedance, body temperature, and humidity, ABLE monitors microbial-driven intervention in psoriasis.

Enhanced Cu2S/CdS coaxial nanowire solar cells by piezo-phototronic effect.

Nanowire solar cells are promising candidates for powering nanosystems and flexible electronics. The strain in the nanowires, introduced during growth, device fabrication and/or application, is an important issue for piezoelectric semiconductor (like CdS, ZnO, and CdTe) based photovoltaic. In this work, we demonstrate the first largely enhanced performance of n-CdS/p-Cu(2)S coaxial nanowire photovoltaic (PV) devices using the piezo-phototronics effect when the PV device is subjected to an external strain. Piezo-phototronics effect could control the electron-hole pair generation, transport, separation, and/or recombination, thus enhanced the performance of the PV devices by as high as 70%. This effect offers a new concept for improving solar energy conversation efficiency by designing the orientation of the nanowires and the strain to be purposely introduced in the packaging of the solar cells. This study shed light on the enhanced flexible solar cells for applications in self-powered technology, environmental monitoring, and even defensive technology.

Neuromorphic sensorimotor loop embodied by monolithically integrated, low-voltage, soft e-skin.

Artificial skin that simultaneously mimics sensory feedback and mechanical properties of natural skin holds substantial promise for next-generation robotic and medical devices. However, achieving such a biomimetic system that can seamlessly integrate with the human body remains a challenge. Through rational design and engineering of material properties, device structures, and system architectures, we realized a monolithic soft prosthetic electronic skin (e-skin). It is capable of multimodal perception, neuromorphic pulse-train signal generation, and closed-loop actuation. With a trilayer, high-permittivity elastomeric dielectric, we achieved a low subthreshold swing comparable to that of polycrystalline silicon transistors, a low operation voltage, low power consumption, and medium-scale circuit integration complexity for stretchable organic devices. Our e-skin mimics the biological sensorimotor loop, whereby a solid-state synaptic transistor elicits stronger actuation when a stimulus of increasing pressure is applied.

Wireless, closed-loop, smart bandage with integrated sensors and stimulators for advanced wound care and accelerated healing.

'Smart' bandages based on multimodal wearable devices could enable real-time physiological monitoring and active intervention to promote healing of chronic wounds. However, there has been limited development in incorporation of both sensors and stimulators for the current smart bandage technologies. Additionally, while adhesive electrodes are essential for robust signal transduction, detachment of existing adhesive dressings can lead to secondary damage to delicate wound tissues without switchable adhesion. Here we overcome these issues by developing a flexible bioelectronic system consisting of wirelessly powered, closed-loop sensing and stimulation circuits with skin-interfacing hydrogel electrodes capable of on-demand adhesion and detachment. In mice, we demonstrate that our wound care system can continuously monitor skin impedance and temperature and deliver electrical stimulation in response to the wound environment. Across preclinical wound models, the treatment group healed ~25% more rapidly and with ~50% enhancement in dermal remodeling compared with control. Further, we observed activation of proregenerative genes in monocyte and macrophage cell populations, which may enhance tissue regeneration, neovascularization and dermal recovery.

Topological supramolecular network enabled high-conductivity, stretchable organic bioelectronics.

Intrinsically stretchable bioelectronic devices based on soft and conducting organic materials have been regarded as the ideal interface for seamless and biocompatible integration with the human body. A remaining challenge is to combine high mechanical robustness with good electrical conduction, especially when patterned at small feature sizes. We develop a molecular engineering strategy based on a topological supramolecular network, which allows for the decoupling of competing effects from multiple molecular building blocks to meet complex requirements. We obtained simultaneously high conductivity and crack-onset strain in a physiological environment, with direct photopatternability down to the cellular scale. We further collected stable electromyography signals on soft and malleable octopus and performed localized neuromodulation down to single-nucleus precision for controlling organ-specific activities through the delicate brainstem.

Inhibiting Fibroblast Mechanotransduction Modulates Severity of Idiopathic Pulmonary Fibrosis.

Objective: Idiopathic pulmonary fibrosis (IPF) is a progressive fibrotic lung disease that affects 63 in every 100,000 Americans. Its etiology remains unknown, although inflammatory pathways appear to be important. Given the dynamic environment of the lung, we examined the significance of mechanotransduction on both inflammatory and fibrotic signaling during IPF. Innovation: Mechanotransduction pathways have not been thoroughly examined in the context of lung disease, and pharmacologic approaches for IPF do not currently target these pathways. The interplay between mechanical strain and inflammation in pulmonary fibrosis remains incompletely understood. Approach: In this study, we used conditional KO mice to block mechanotransduction by knocking out Focal Adhesion Kinase (FAK) expression in fibroblasts, followed by induction of pulmonary fibrosis using bleomycin. We examined both normal human and human IPF fibroblasts and used immunohistochemistry, quantitative real-time polymerase chain reaction, and Western Blot to evaluate the effects of FAK inhibitor (FAK-I) on modulating fibrotic and inflammatory genes. Results: Our data indicate that the deletion of FAK in mice reduces expression of fibrotic and inflammatory genes in lungs. Similarly, mechanical straining in normal human lung fibroblasts activates inflammatory and fibrotic pathways. The FAK inhibition decreases these signals but has a less effect on IPF fibroblasts as compared with normal human fibroblasts. Conclusion: Administering FAK-I at early stages of fibrosis may attenuate the FAK-mediated fibrotic response pathway in IPF, potentially mediating disease progression.

Adipose-Derived Stromal Cells Seeded in Pullulan-Collagen Hydrogels Improve Healing in Murine Burns.

Burn scars and scar contractures cause significant morbidity for patients. Recently, cell-based therapies have been proposed as an option for improving healing and reducing scarring after burn injury, through their known proangiogenic and immunomodulatory paracrine effects. Our laboratory has developed a pullulan-collagen hydrogel that, when seeded with mesenchymal stem cells (MSCs), improves cell viability and augments their proangiogenic capacity in vivo. Concurrently, recent research suggests that prospective isolation of cell subpopulations with desirable transcriptional profiles can be used to further improve cell-based therapies. In this study, we examined whether adipose-derived stem cell (ASC)-seeded hydrogels could improve wound healing following thermal injury using a murine contact burn model. Partial thickness contact burns were created on the dorsum of mice. On days 5 and 10 following injury, burns were debrided and received either ASC hydrogel, ASC injection alone, hydrogel alone, or no treatment. On days 10 and 25, burns were harvested for histologic and molecular analysis. This experiment was repeated using CD26+/CD55+ FACS-enriched ASCs to further evaluate the regenerative potential of ASCs in wound healing. ASC hydrogel-treated burns demonstrated accelerated time to reepithelialization, greater vascularity, and increased expression of the proangiogenic genes MCP-1, VEGF, and SDF-1 at both the mRNA and protein level. Expression of the profibrotic gene Timp1 and proinflammatory gene Tnfa was downregulated in ASC hydrogel-treated burns. ASC hydrogel-treated burns exhibited reduced scar area compared to hydrogel-treated and control wounds, with equivalent scar density. CD26+/CD55+ ASC hydrogel treatment resulted in accelerated healing, increased dermal appendage count, and improved scar quality with a more reticular collagen pattern. Here we find that ASC hydrogel therapy is effective for treating burns, with demonstrated proangiogenic, fibromodulatory, and immunomodulatory effects. Enrichment for CD26+/CD55+ ASCs has additive benefits for tissue architecture and collagen remodeling postburn injury. Research is ongoing to further facilitate clinical translation of this promising therapeutic approach. Impact statement Burns remain a significant public health burden. Stem cell therapy has gained attention as a promising approach for treating burns. We have developed a pullulan-collagen biomimetic hydrogel scaffold that can be seeded with adipose-derived stem cells (ASCs). We assessed the delivery and activity of our scaffold in a murine contact burn model. Our results suggest that localized delivery of ASC hydrogel treatment is a promising approach for the treatment of burn wounds, with the potential for rapid clinical translation. We believe our work will have broad implications for both hydrogel therapeutics and regenerative medicine and will be of interest to the general scientific community.

Biodegradable and flexible arterial-pulse sensor for the wireless monitoring of blood flow.

The ability to monitor blood flow is critical to patient recovery and patient outcomes after complex reconstructive surgeries. Clinically available wired implantable monitoring technology requires careful fixation for accurate detection and needs to be removed after use. Here, we report the design of a pressure sensor, made entirely of biodegradable materials and based on fringe-field capacitor technology, for measuring arterial blood flow in both contact and non-contact modes. The sensor is operated wirelessly through inductive coupling, has minimal hysteresis, fast response times, excellent cycling stability, is highly robust, allows for easy mounting and eliminates the need for removal, thus reducing the risk of vessel trauma. We demonstrate the operation of the sensor with a custom-made artificial artery model and in vivo in rats. This technology may be advantageous in real-time post-operative monitoring of blood flow after reconstructive surgery.