Effectiveness of ultrasound-guided dual nerve block in the below-knee amputation.

PURPOSE: Below knee amputation (BKA) is a common surgical procedure for diabetic foot ulcers and necrotizing lower limb fasciitis patients. However, it is a painful procedure and inadequate postoperative analgesia impedes rehabilitation and prolongs hospitalization. An ideal pain management regimen should provide superior analgesia while minimizing opioid consumption and improving rehabilitation. METHODS: We retrospectively reviewed medical charts of 218 patients who underwent BKA for diabetic foot ulcer or necrotizing lower limb fasciitis at a single center between January 2017 and September 2020. Two groups were analyzed: patients who received dual nerve block (DNB) before surgery (Group I; n = 104), and patients who did not (Group II; n = 93). By the exclusion criteria, 21 patients were excluded. The femoral and sciatic nerves were each blocked separately under ultrasound guidance. This procedure was performed immediately before the operation. RESULTS: Group I patients' subjective pain scores were significantly lower than that of Group II at 6, 12, and 24 h after BKA (P < 0.05). Group I's morphine milligram equivalent (MME) was significantly lower than those of Group II at 72 h after BKA (P < 0.05). Moreover, the rate of postoperative nausea and vomiting (PONV) and delirium was significantly lower in Group I patients than that in Group II patients. CONCLUSION: Ultrasound-guided lower extremity nerve block surgery is excellent for early postoperative pain control, could be used as an accurate and effective pain control method, and can reduce the side effects of opioid consumption after BKA.

Perinatal Outcomes According to Accessibility to Maternal-Fetal and Neonatal Intensive Care Units by Region in Korea.

BACKGROUND: Herein, we aimed to evaluate the maternal mortality ratio and perinatal mortality rate for different perinatal medical care service areas (PMCSAs), which were established by considering their geographical accessibility to maternal-fetal intensive care units (MFICUs) and neonatal intensive care units (NICUs), and to compare the PMCSAs according to their accessibility to these perinatal care services. METHODS: Based on the 70 hospital service areas (HSAs) across the country confirmed through the Dartmouth Atlas methodology analysis and gathering of expert opinions, the PMCSAs were designated by merging HSAs without MFICUs and NICUs to the nearest HSA that contained MFICUs and NICUs, based on which MFICU and NICU could be reached within the shortest amount of time from population-weighted centroids in HSAs. PMCSAs where 30% or more of the population could not access MFICUs and NICUs within 60 minutes were identified using the service module ArcGIS and were defined as having access vulnerability. RESULTS: Thirty-three of 70 HSAs in the country did not contain MFICUs and NICUs, and 39 PMCSAs were finally derived by merging 70 HSAs. Ten of 39 PMCSAs (25.6%) were classified as having access vulnerability to MFICUs and NICUs. The national maternal mortality ratio was 9.42, with the highest ratio seen in the region of Wonju (25.86) and the lowest in Goyang (2.79). The national perinatal mortality rate was 2.86, with the highest and lowest rates observed in the Gunsan (4.04) and Sejong (1.99) regions, respectively. The perinatal mortality rates for areas vulnerable and invulnerable to maternal and neonatal healthcare accessibility were 2.97 and 2.92, respectively, but there was no statistically significant difference in this rate (P = 0.789). The maternal mortality ratio for areas vulnerable and invulnerable to maternal and neonatal healthcare accessibility were 14.28 and 9.48, respectively; this ratio was significantly higher in areas vulnerable to accessibility (P = 0.022). CONCLUSION: Of the PMCSAs across the country, 25.6% (10/39) were deemed to be vulnerable to MFICU and NICU accessibility. There was no difference in the perinatal mortality rate between the vulnerable and invulnerable areas, but the maternal mortality ratio in vulnerable areas was significantly higher than that in invulnerable areas.

Return to play after arthroscopic treatment for shoulder instability in elite and professional baseball players.

BACKGROUND: This study evaluated the clinical outcome of arthroscopic treatment for anterior shoulder dislocation in elite and professional baseball players. METHODS: This study included 51 baseball players who underwent arthroscopic Bankart repair between 2008 and 2015. The follow-up duration was set at 24 months or longer, based on clinic visit or telephone survey. After surgery, players who played in 1 or more official games were considered to have returned to play (RTP), and those who participated in more than 10 official games were considered to have solidly returned to play (sRTP). The RTP and sRTP rates were analyzed by player position (pitcher, catcher, and in-fielder), and the period of RTP after surgery (rehabilitation period) was investigated. RESULTS: Of 51 baseball players (mean age, 20.9 years), 14 were pitchers, 6 were catchers, and 31 were in-fielders. Pitchers showed 64% RTP and 57% sRTP, catchers, 83% RTP and 83% sRTP, and in-fielders, 90% RTP and 90% sRTP. The overall RTP and sRTP rates were 82% and 80%, respectively. The average RTP period after surgery (rehabilitation period) was 8.4 months, with 9.6, 9.1, and 7.4 months for pitchers, catchers, and in-fielders, respectively. CONCLUSIONS: The RTP after arthroscopic Bankart repair shows favorable results, with the nonthrowing shoulder and in-field position yielding the best results. Players undergoing arthroscopic Bankart repair and the surgeon should be aware of the possible outcomes based on the throwing/nonthrowing arm and various positions.

Prevalence and clinical outcomes of heterotopic ossification after ulnar collateral ligament reconstruction.

BACKGROUND: Ulnar collateral ligament (UCL) reconstruction has become increasingly popular in elite athletes. However, the prevalence of heterotopic ossification (HO) formation after UCL reconstruction has not yet been reported. We sought to determine the prevalence of HO formation after UCL reconstruction and the clinical outcomes following HO treatment. MATERIALS AND METHODS: From October 2005 to April 2014, 179 patients underwent primary UCL reconstruction. Of the 179 patients, 161 with a minimum of 2 years of follow-up were retrospectively reviewed to evaluate HO formation and clinical outcomes. RESULTS: Among 161 patients, HO was detected in 8 cases (5%). Of these 8 patients, 2 were asymptomatic and another 2 complained about transient ulnar neuropathy. The remaining 4 patients had pain; 2 were treated with open excision, and 1 underwent arthroscopic excision. The odds of HO in patients in whom transient ulnar neuropathy develops after UCL reconstruction are 6 times higher than those without transient ulnar neuropathy (odds ratio, 5.957; 95% confidence level, P = .04). Of the 8 patients, 7 returned to the same level or a higher level of competition. HO was found, on average, 5 months (range, 3-9 months) after UCL reconstruction. CONCLUSION: The prevalence of HO formation was approximately 5% after UCL reconstruction and increased with transient ulnar neuropathy. After UCL reconstruction, the surgeon should carefully observe HO formation, especially in the early stages after the operation. With appropriate treatment, the clinical outcomes of HO treatment after UCL reconstruction are favorable.

Automated detection and classification of the proximal humerus fracture by using deep learning algorithm.

Background and purpose - We aimed to evaluate the ability of artificial intelligence (a deep learning algorithm) to detect and classify proximal humerus fractures using plain anteroposterior shoulder radiographs. Patients and methods - 1,891 images (1 image per person) of normal shoulders (n = 515) and 4 proximal humerus fracture types (greater tuberosity, 346; surgical neck, 514; 3-part, 269; 4-part, 247) classified by 3 specialists were evaluated. We trained a deep convolutional neural network (CNN) after augmentation of a training dataset. The ability of the CNN, as measured by top-1 accuracy, area under receiver operating characteristics curve (AUC), sensitivity/specificity, and Youden index, in comparison with humans (28 general physicians, 11 general orthopedists, and 19 orthopedists specialized in the shoulder) to detect and classify proximal humerus fractures was evaluated. Results - The CNN showed a high performance of 96% top-1 accuracy, 1.00 AUC, 0.99/0.97 sensitivity/specificity, and 0.97 Youden index for distinguishing normal shoulders from proximal humerus fractures. In addition, the CNN showed promising results with 65-86% top-1 accuracy, 0.90-0.98 AUC, 0.88/0.83-0.97/0.94 sensitivity/specificity, and 0.71-0.90 Youden index for classifying fracture type. When compared with the human groups, the CNN showed superior performance to that of general physicians and orthopedists, similar performance to orthopedists specialized in the shoulder, and the superior performance of the CNN was more marked in complex 3- and 4-part fractures. Interpretation - The use of artificial intelligence can accurately detect and classify proximal humerus fractures on plain shoulder AP radiographs. Further studies are necessary to determine the feasibility of applying artificial intelligence in the clinic and whether its use could improve care and outcomes compared with current orthopedic assessments.

Effects of a Single-Dose Interscalene Block on Pain and Stress Biomarkers in Patients Undergoing Arthroscopic Rotator Cuff Repair: A Randomized Controlled Trial.

PURPOSE: To compare the effects of a single-dose interscalene block and general anesthesia (SISB/GA) with the effects of GA only in the early postoperative period after arthroscopic rotator cuff repair by evaluating subjective pain visual analog scale scores and objective pain-related stress biomarkers. METHODS: Patients refractory to conservative treatment of the affected shoulder were enrolled in this prospective, randomized endpoint study. Patients diagnosed with a rotator cuff tear (1-4 cm) based on magnetic resonance imaging were included. Exclusion criteria were small (<1 cm) and massive (>4 cm) rotator cuff tears. Thirty-one patients each were randomized into the SISB/GA and GA treatment groups. Preoperative pain scores were measured at 6:00 AM on the day of surgery, measured again at 1 and 6 hours postoperatively, and then every 6 hours until 3 days postoperatively. Blood sampling was performed to evaluate the stress biomarkers insulin, dehydroepiandrosterone sulfate, and fibrinogen preoperatively at 6:00 AM on the day of surgery and postoperatively at 18, 42, and 66 hours (6:00 AM on postoperative days 1-3). RESULTS: Pain scores were significantly decreased in the SISB/GA group (2.50 ± 0.94) versus the GA group (3.82 ± 1.31) on the day of surgery (P < .001), and especially at 6 hours postoperatively (SISB/GA: 2.42 ± 1.43; GA: 4.23 ± 2.17; P < .001). Insulin was decreased significantly in the SISB/GA group (10.55 ± 7.92 µU/mL) versus the GA group (20.39 ± 25.60 µU/mL) at 42 hours postoperatively (P = .048). There was no significant change in dehydroepiandrosterone sulfate or fibrinogen over time (P > .05). CONCLUSIONS: After arthroscopic rotator cuff repair, an SISB effectively relieved pain on the day of surgery without any complications. In addition, insulin levels were significantly reduced at 42 hours postoperatively. LEVEL OF EVIDENCE: Level I, prospective randomized controlled trial.

Bennett lesions in baseball players detected by magnetic resonance imaging: assessment of association factors.

BACKGROUND: The purpose of this study was to evaluate the characteristics of Bennett lesions in baseball players compared with those without a Bennett lesion and to identify other possible factors associated with Bennett lesions on magnetic resonance imaging (MRI). METHODS: We investigated 388 male baseball players with a career >1 year. Demographic factors and a routine physical examination, including glenohumeral internal rotation difference, scapular dyskinesis, and various pathologic changes, were reviewed on MRI to identify relative factors for Bennett lesions. RESULTS: Of the 388 patients evaluated, 125 (32.2%) were diagnosed with Bennett lesions of the shoulder. No significant differences were observed between the groups in demographic factors, physical examination results, visual analog scale score, American Shoulder and Elbow Surgeons score, or prevalence of concomitant diseases. However, players with Bennett lesions had played baseball longer than those without the lesions (P < .001). CONCLUSION: An association was found between Bennett lesions and the length of time that a patient with a Bennett lesion had played baseball. The prevalence of pathologic lesions detected on MRI and the physical examination results were not different between players with and without Bennett lesions.

Retrospective Analysis of Ultrasound-Guided Serial-Injection Triple Nerve Block Efficacy in Cementless Bipolar Hemiarthroplasty for Femoral Neck Fracture.

BACKGROUND: Femoral neck fractures are effectively treated with bipolar hemiarthroplasty (BHA) surgery, yet postoperative pain management remains a challenge. This study explores the efficacy of multimodal pain management in minimizing opioid use and enhancing recovery. METHODS: A retrospective analysis of 87 patients who underwent BHA between September 2016 and September 2020 was conducted. Patients were analyzed in two groups: Group I (n = 42), receiving serial-injection nerve blocks (SINBs) before and after surgery, and Group II (n = 41), with no SINB. Notably, all nerve blocks for Group I were performed after November 2017, following the implementation of this technique in our protocol. Pain and analgesic medication usage were assessed over 72 h post-surgery, along with hospitalization duration and perioperative complications. RESULTS: Group I patients exhibited significantly lower pain scores at 6, 12, 24, and 48 h post-surgery, alongside reduced incidences of postoperative nausea and vomiting (PONV) and delirium compared with Group II (p < 0.05). CONCLUSIONS: Utilizing sequential lower limb nerve blocks under ultrasound guidance in BHA surgeries effectively reduces early postoperative pain and associated adverse effects. This approach demonstrates potential benefits in pain management, leading to diminished narcotic usage and lower risks of PONV and delirium.

Discordance between dual-energy X-ray absorptiometry bone mineral density and spinal computed tomography texture analysis: An investigation into low correlation rates.

Objectives: This research delves into the application of texture analysis in spine computed tomography (CT) scans and its correlation with bone mineral density (BMD), as determined by dual-energy X-ray absorptiometry (DXA). It specifically addresses the discordance between the 2 measurements, suggesting that certain spinal-specific factors may contribute to this discrepancy. Methods: The study involved 405 cases from a single institution collected between May 6, 2012 and June 30, 2021. Each case underwent a spinal CT scan and a DXA scan. BMD values at the lumbar region (T12 to S1) and total hip were recorded. Texture features from axial cuts of T12 to S1 vertebrae were extracted using gray-level co-occurrence matrices, and a regression model was constructed to predict the BMD values. Results: The correlation between CT texture analysis results and BMD from DXA was moderate, with a correlation coefficient ranging between 0.4 and 0.5. This discordance was examined in light of factors unique to the spine region, such as abdominal obesity, aortic calcification, and lumbar degenerative changes, which could potentially affect BMD measurements. Conclusions: Emerging from this study is a novel insight into the discordance between spinal CT texture analysis and DXA-derived BMD measurements, highlighting the unique influence of spinal attributes. This revelation calls into question the exclusive reliance on DXA scans for BMD assessment, particularly in scenarios where DXA scanning may not be feasible or accurate.

Elucidating the Correlation between Bone Mineral Density and Multifidus Muscle Characteristics: A Cross-Modal Study with Dual-Energy X-ray Absorptiometry and Spinal Computed Tomography Texture Analysis.

BACKGROUND: Recent research underscores the clinical relevance of muscle conditions such as sarcopenia and their links to bone mineral density (BMD), yet notable gaps persist in the understanding of their interconnections. Our study addresses this by introducing a novel approach to decipher the correlation between BMD and the texture of the multifidus muscle, utilizing spinal computed tomography (CT) and dual-energy X-ray absorptiometry (DXA) to evaluate muscle texture, BMD, and bone mineral content (BMC) at the total lumbar vertebra and total hip. METHODS: Our single-institution study examined 395 cases collected from 6 May 2012 to 30 November 2021. Each patient underwent a spinal CT scan and a DXA scan within a one-month interval. BMD and BMC at the total lumbar vertebra and total hip were measured. The texture features of the multifidus muscle from the axial cuts of T12 to S1 vertebrae were assessed via gray-level co-occurrence matrices. CT texture analysis values at angles of 45 + 45 and 90 degrees were calculated and correlated with BMD and BMC. A regression model was then constructed to predict BMD values, and the precision of these correlations was evaluated using mean square error (MSE) analysis. RESULTS: Total lumbar BMC showed a correlation of 0.583-0.721 (MSE 1.568-1.842) and lumbar BMD of 0.632-0.756 (MSE 0.068-0.097). Total hip BMC had a correlation of 0.556-0.690 (MSE 0.448-0.495), while hip BMD ranged from 0.585 to 0.746 (MSE 0.072-0.092). CONCLUSIONS: The analysis of spinal CT texture alongside BMD and BMC measures provides a new approach to understanding the relationship between bone and muscle health. The strong correlations expected from our research affirm the importance of integrating bone and muscle measures in the prevention, diagnosis, and management of conditions such as sarcopenia and osteoporosis.

Comparative Analysis of CT Texture in Lumbar and Femur and Its Correlation with Bone Mineral Density and Content over Time: An Exploratory Study.

BACKGROUND: This research explores the application of morphometric texture analysis in chest Computed Tomography (CT) scans for determining Bone Mineral Content (BMC) and its temporal changes, both crucial in diagnosing osteoporosis. The study establishes an innovative approach to osteoporosis screening by leveraging Hounsfield Units (HUs) in CT scans to evaluate BMC, offering a comparison with dual-energy X-ray absorptiometry (DXA)-based BMC. METHODS: A total of 806 instances (encompassing 379 individuals) were meticulously compiled from a sole institution, during the period stretching from 6 May 2012 to 30 June 2020. In this detailed analysis, each participant was subjected to a pair of chest CT scans, sequentially pursued by a DXA scan, spread over two years. Focused records of BMC values at the inaugural lumbar vertebra (L1) were secured from both the DXA and CT axial slices across all instances. A meticulous selection process pinpointed the largest trabecular section from the L1 vertebral body, whereupon 45 distinctive texture attributes were harvested utilizing gray-level co-occurrence matrix methodologies. Utilizing these amassed 45 attributes, a regression architecture was devised, aiming to forecast the precise BMC values individually. Moreover, an alternative regression framework was engaged, leveraging 90 distinct features, to gauge the BMC fluctuations observed between the duo of scans administered to each participant. RESULTS: The precision of the cultivated regression frameworks was scrupulously assessed, benchmarking against the correlation coefficient (CC) and the mean absolute deviation (MAE) in comparison to the DXA-established references. The regression apparatus employed for estimating BMC unveiled a CC of 0.754 and an MAE of 1.641 (g), respectively. Conversely, the regression mechanism devoted to discerning the variations in BMC manifested a CC of 0.680, coupled with an MAE of 0.528 (g), respectively. CONCLUSION: The innovative methodology utilizing morphometric texture analysis in CT HUs offers an indirect, yet promising, approach for osteoporosis screening by providing estimations of BMC and its temporal changes. The estimations demonstrate moderate positive correlations with DXA measures, suggesting a potential alternative in circumstances where DXA scanning is limited.

Assessing bone mineral density in non-weight bearing regions of the body: a texture analysis approach using abdomen and pelvis computed tomography Hounsfield units-a cross-sectional study.

Background: Highlighting a gap in comprehending bone microarchitecture's intricacies using dual-energy X-ray absorptiometry (DXA), this study aims to bridge this chasm by analyzing texture in non-weight bearing regions on axial computed tomography (CT) scans. Our goal is to enrich osteoporosis patient management by enhancing bone quality and microarchitecture insights. Methods: Conducted at Busan Medical Center from March 1, 2013, to August 30, 2022, 1,320 cases (782 patients) were screened. After applying exclusion criteria, 458 samples (296 patients) underwent bone mineral density (BMD) assessment with both CT and DXA. Regions of interest (ROIs) included spine pedicle's maximum trabecular area, sacrum Zone 1, superior/inferior pubic ramus, and femur's greater/lesser trochanters. Texture features (n=45) were extracted from ROIs using gray-level co-occurrence matrices. A regression model predicted BMD, spotlighting the top five influential texture features. Results: Correlation coefficients ranged from 0.709 (lowest for total femur BMD) to 0.804 (highest for femur intertrochanter BMD). Mean squared error (MSE) values were also provided for lumbar and femur BMD/bone mineral content (BMC) metrics. The most influential texture features included contrast_32, correlation_32_v, and three other metrics. Conclusions: By melding traditional DXA and CT texture analysis, our approach presents a comprehensive bone health perspective, potentially revolutionizing osteoporosis diagnostics.

Exploring the Paradox of Bone Mineral Density in Type 2 Diabetes: A Comparative Study Using Opportunistic Chest CT Texture Analysis and DXA.

BACKGROUND: This study aimed to validate the application of CT texture analysis in estimating Bone Mineral Density (BMD) in patients with Type 2 Diabetes (T2D) and comparing it with the results of dual-energy X-ray absorptiometry (DXA) in a normative cohort. METHODS: We analyzed a total of 510 cases (145 T2D patients and 365 normal patients) from a single institution. DXA-derived BMD and CT texture analysis-estimated BMD were compared for each participant. Additionally, we investigated the correlation among 45 different texture features within each group. RESULTS: The correlation between CT texture analysis-estimated BMD and DXA-derived BMD in T2D patients was consistently high (0.94 or above), whether measured at L1 BMD, L1 BMC, total hip BMD, or total hip BMC. In contrast, the normative cohort showed a modest correlation, ranging from 0.66 to 0.75. Among the 45 texture features, significant differences were found in the Contrast V 64 and Contrast V 128 features in the normal group. CONCLUSION: In essence, our study emphasizes that the clinical assessment of bone health, particularly in T2D patients, should not merely rely on traditional measures, such as DXA BMD. Rather, it may be beneficial to incorporate other diagnostic tools, such as CT texture analysis, to better comprehend the complex interplay between various factors impacting bone health.

Assessing Bone Mineral Density in Weight-Bearing Regions of the Body through Texture Analysis of Abdomen and Pelvis CT Hounsfield Unit.

Objective: This study aimed to develop a novel method for opportunistically screening osteoporosis by measuring bone mineral density (BMD) from CT images. We addressed the limitations of commercially available software and introduced texture analysis using Hounsfield units (HU) as an alternative approach. Methods: A total of 458 samples (296 patients) were selected from a dataset of 1320 cases (782 patients) between 1 March 2013, and 30 August 2022. BMD measurements were obtained from the ilium, femoral neck, intertrochanteric region of both femurs, and L1-L5 and sacrum spine body. The region of interest (ROI) for each patient's CT scan was defined as the maximum trabecular area of the spine body, ilium, femoral neck, and femur intertrochanter. Using gray-level co-occurrence matrices, we extracted 45 texture features from each ROI. Linear regression analysis was employed to predict BMD, and the top five influential texture features were identified. Results: The linear regression (LR) model yielded correlation coefficients (R-squared values) for total lumbar BMD, total lumbar BMC, total femur BMD, total femur BMC, femur neck BMD, femur neck BMC, femur intertrochanter BMD, and femur intertrochanter BMC as follows: 0.643, 0.667, 0.63, 0.635, 0.631, 0.636, 0.68, and 0.68, respectively. Among the 45 texture features considered, the top five influential factors for BMD prediction were Entropy, autocorrelate_32, autocorrelate_32_volume, autocorrelate_64, and autocorrelate_64_volume.

Returning to golf after rotator cuff repair.

Background: The prevalence of rotator cuff repair is increasing; however, no study has assessed patients who have returned to golf activity after arthroscopic rotator cuff repair. Methods: The subjects of the survey were 633 patients who were at least two years postoperative after rotator cuff repair from January 2005 to December 2017. From August 2019 to October 2019, survey responses were collected via an online questionnaire or phone calls and a total of 197 patients were reviewed retrospectively to study about returning to golf after rotator cuff repair. The detailed survey included 12 questions specific to the patient's golf career, performance, time of return to play, and symptoms related to golf activity. Depending on the size of the rotator cuff tear, each question was statistically analyzed to determine whether there were differences in the time of return to golf, uncomfortable symptoms when golfing, and distance of the driving. Results: Of the 197 patients who underwent arthroscopic rotator cuff repair, there were 145 patients (73.6%) returned to golf. In the analysis results of 145 patients, the longer the golf career, the greater the chance of returning to golf. Sixty (30.5%) people returned to golf at 1 year after surgery. Twenty-one patients (10.7%) improved and 46 patients (23.4%) maintained their driving distance, whereas 78 patients (39.6%) had a worse driving distance after surgery. Ten patients (5.1%) improved and 97 patients (49.2%) maintained their golf score, but 38 patients (19.3%) had worse golf scores after surgery. Symptoms when playing golf were reported in the order of no symptoms (62.1%), a limited range of motion (13.1%), muscle weakness (11.1%), and anxious about their operated shoulder (10.3 %). Men were 6.9 times more likely to return to golf than women (odds ratio, 6.9; 95% confidence interval, 3.2-14.8). The younger the age and the shorter the time since surgery, the higher the golfing return rate. The rate of returning to golf was high in the group of patients with good tissue quality during surgery (odds ratio, 3.9; 95% confidence interval, 0.01-2.6). Conclusion: The golfing return rate after arthroscopic rotator cuff repair was higher than expected (73.6%) and most players returned at 1 year after surgery. Especially, in the case of young males, their golf scores were maintained or improved and they were able to return to golf earlier after surgery. Better tissue quality in the intraoperative torn tendon was associated with a greater chance of returning to golf.

Magnetic resonance imaging analysis of screw in-type lateral anchor pull-out in large to massive rotator cuff repair in patients older than 60 years.

BACKGROUND: This study was performed to identify the incidence of screw in-type lateral anchor pull-out in patients older than 60 years who underwent rotator cuff repair for large to massive rotator cuff tear (RCT). METHODS: We reviewed 25 patients over 60 who were diagnosed with large to massive RCT and underwent arthroscopic rotator cuff repair in our hospital from March 2017 to February 2021. Preoperative tear size (anterior to posterior, medial to lateral) was measured via preoperative magnetic resonance imaging (MRI). All 25 patients underwent MRI scanning on postoperative day 1 and at 3 months after surgery. The change of anchor position was measured in axial views on MRI images postoperative day 1 and 3 months after surgery. And it was statistically compared according to bone mineral density (BMD), sex, and number of lateral anchors. RESULTS: Two MRIs (postoperative day 1 and 3 months) in 25 patients were compared. Anchor pull-out occurred in six patients during 3 months (6.7%), and the mean pull-out length difference was 1.56 mm (range, 0.16-2.58 mm). There was no significant difference in the number of pull-out anchors, degree of pull-out difference by comparing BMD (A, BMD≤-2.5; B, BMD>-2.5), sex, or number of anchors used in each surgery (C, two anchors; D, three anchors) (p>0.05). CONCLUSIONS: Pull-out of screw in-type anchors was rarely observed and the mean pull-out length difference was negligibly small in our study. The screw in-type lateral anchor seems to be a decent option without concern of anchor pull-out even in elderly patients.

Lidar measurements of Raman scattering at ultraviolet wavelength from mineral dust over East Asia.

We developed a novel measurement channel that utilizes Raman scattering from silicon dioxide (SiO2) quartz at an ultraviolet wavelength (361 nm). The excitation of the Raman signals is done at the primary wavelength of 355 nm emitted from a lidar instrument. In combination with Raman signals from scattering from nitrogen molecules, we may infer the mineral-quartz-related backscatter coefficient. This technique thus allows us to identify in a comparably direct way the mineral quartz content in mixed pollution plumes that consist, e.g., of a mix of desert dust and urban pollution. We tested the channel for the complex situation of East Asian pollution. We find good agreement of the inferred mineral-quartz-related backscatter coefficient to results obtained with another mineral quartz channel which was operated at 546 nm (primary emission wavelength at 532 nm), the functionality of which has already been shown for a lidar system in Tsukuba (Japan). The advantage of the novel channel is that it provides a better signal-to-noise ratio because of the shorter measurement wavelength.

Does cerclage wiring interfere with fracture healing of osteosynthesis in comminuted midshaft clavicle fractures? A multicenter study.

INTRODUCTION: Historically, cerclage wires were not used in the treatment of clavicle fractures because of their invasiveness. The purpose of this study was to evaluate the radiologic results and the incidence of complications following cerclage wire application and plate fixation in the treatment of comminuted mid-shaft clavicle fractures. MATERIALS AND METHODS: A total of 116 patients with comminuted mid-shaft clavicle fractures who underwent open reduction and internal fixation were reviewed. We analyzed the postoperative length ratio and bone union period according to the fracture classification, patient age, the number of fragments and the number of applied wires. The thickness of the fracture site was compared with the normal contralateral clavicle shaft. RESULTS: Bone union was confirmed in all enrolled patients at an average of 14.9±4.67 weeks. There are no significant differences in the length ratio or bone union period among the subgroups (including the fracture types, age, number of fragments and applied wires). The diameter at the occupied area was not significantly from that on the normal side (p=.505). CONCLUSIONS: The application of a single cerclage or multiple cerclage wires around the fracture site did not hamper the clavicle shaft fracture healing. This result suggests that cerclage wires should not be avoided, but can be used as a viable treatment option for clavicle shaft fractures. LEVEL OF EVIDENCE: IV.

Lateral ulnar collateral ligament (LUCL) reconstruction for the treatment of recalcitrant lateral epicondylitis of the elbow: a comparison with open débridement of the extensor origin.

BACKGROUND: Based on the controversy over whether the extensor tendon is the only lesion of lateral epicondylitis of the elbow and numerous reports of concomitant lateral collateral ligament involvement, potential damage to the lateral collateral ligament complex should be considered for the treatment. METHODS: About 25 elbows in 23 patients (débridement group) and 22 elbows in 20 patients (reconstruction group) who were diagnosed with lateral epicondylitis and had an average of 22 months of symptoms revealing anatomical lesion on MRI were included. The capitellum-sublime tubercle-radial head (CSR) angle was measured on both sides preoperatively, and the visual analog scale (VAS) and Mayo elbow performance score (MEPS) were measured over 12 months, postoperatively. RESULTS: The initial preoperative mean VAS was statistically significant with 4.6 in the débridement group and 6.5 in the reconstruction group (P < .05). Postoperative VAS was continuously decreased in both groups with no significant difference at each assessment period (P < .05) but showed more rapid improvement in the reconstruction group compared with the débridement group. For MEPS, the reconstruction group showed significant improvement during the follow-up periods, and at the final follow-up MEPS, 3 cases in the débridement group and 0 cases in the reconstruction group showed a poor result, which was considered as surgery failure. The CSR angle of the affected side (7.2 ± 1.9) was significantly larger than that of the normal side (3.6 ± 1.5) (P < .05) in the reconstruction group. Increased CSR by more than 5 degrees was identified as a significant predictive indicator for potential concomitant ligament insufficiency (area under curve = 0.875, P < .001) showing 80.9% of the sensitivity, 82.1% of the specificity. CONCLUSIONS: In the surgical treatment of recalcitrant lateral epicondylitis, lateral ulnar collateral ligament reconstruction added to the débridement of extensor origin may provide better results for the patients with suspicious lateral ligament insufficiency or failed previous surgery.

Occult thoracoacromial artery injury during reverse total shoulder arthroplasty resulting in a cascade of postoperative complications: A case report.

We report a case of a 78-year old female patient got the reverse total shoulder arthroplasty with a series of events. After diagnosed with anterior shoulder dislocation and coracoid process fracture at a local hospital, she received conservative care after reduction but persistent reduction loss occurred. Preoperative Magnetic Resonance Imaging confirmed underlying massive fatty infiltration and severe retraction of rotator cuff muscles. Considering underlying chronic rotator cuff arthropathy on preoperative X-ray and Computed Tomography scan with irreparable rotator cuff tears, we decided to perform reverse total shoulder arthroplasty. After unexpected vessel injury possibly due to underlying bleeding tendency or intra-operative procedure, severe complications occurred including active arterial bleeding, brachial plexus palsy and skin necrosis. Serial managements which included embolization of the artery, wound management while implant exposure status, and operative coverage of a skin defect by Latissimus Dorsi pedicled flap and Split Thickness Skin Graft were done. This series of events suggests that surgeons should be more careful than we were about possible injuries of small vessel branches that can cause unexpected complications, and keep in mind the importance of immediate cooperation with other medical professionals such as radiologists, plastic surgeons, and thoracic surgeons.