RESUMEN
To understand the mechanism of dark abiotic mercury (Hg) methylation by algae-derived dissolved organic matter (DOM) and effectively manage the environmental risks of mercury methylation in aquaculture areas, we investigated the influence of subfractions of DOM released from algae (Ulothrix sp.) decomposition on mercury methylation. The results showed that the hydrophobic basic component (HOB) in DOM exhibited the most substantial promotion effect on Hg methylation. The methylmercury (MeHg) production in the HOB treatment increased significantly, while the production rate of MeHg (%MeHg represented the concentration ratio of MeHg to THg) in the six subfractions treated solutions decreased significantly with the increase of Hg concentration. The change of the %MeHg was more evident at low Hg concentration, indicating the limited number of binding sites and methyl donors on DOM. As a consequence, Hg(â ¡) in the solution could not be converted into MeHg in equal proportion. Furthermore, the production of MeHg in solution was significantly reduced by the decomposed algae DOM, and its concentration was in the range of 0.017-0.085 ng·L-1 (significantly lower than undecomposed algal). The difference between the decomposed and the non-decomposed algae DOM reached a significant level (P < 0.05). When the DOM decayed for 20 and 30 days, the Hg methylation ability of DOM was weakened most obviously. During the decomposition process, considerable variations were observed among the subfractions, with HOB consistently playing a dominant role in Hg methylation. At the same time, the hydrophilic acid component exhibited a significant inhibitory effect on Hg methylation. Generally, the main components (e.g. HOB and HIA (hydrophilic acid component)) of DOM affecting mercury methylation were found in our study, which provided a better understanding of algae-derived DOM subfractions on the Hg methylation, in an attempt to prevent and control water pollution in aquaculture areas.
Asunto(s)
Mercurio , Compuestos de Metilmercurio , Contaminantes Químicos del Agua , Mercurio/análisis , Materia Orgánica Disuelta , Compuestos de Metilmercurio/metabolismo , Metilación , Contaminantes Químicos del Agua/análisisRESUMEN
The remediation of heavy metals/metalloids (HMs) co-contaminated soil by solid wastes-based stabilizers (SWBS) has received major concern recently. Based on the literature reported in the latest years (2010-2023), this review systematically summarizes the different types of solid wastes (e.g., steel slag, coal fly ash, red mud, and sewage sludge, etc.) employed to stabilize HMs contaminated soil, and presents results from laboratory and field experiments. Firstly, the suitable solid wastes for soil remediation are reviewed, and the pros and cons are presented. Thereafter, the technical feasibility and economic benefit are evaluated for field application. Moreover, evaluation methods for remediation of different types of HMs-contaminated soil and the effects of SWBS on soil properties are summarized. Finally, due to the large specific surface, porous structure, and high reactivity, the SWBS can effectively stabilize HMs via adsorption, complexation, co/precipitation, ion exchange, electrostatic interaction, redox, and hydration process. Importantly, the environmental implications and long-term effectiveness associated with the utilization of solid wastes are highlighted, which are challenges for practical implementation of soil stabilization using SWBS, because the aging of soil/solid wastes has not been thoroughly investigated. Future attention should focus on modifying the SWBS and establishing an integrated long-term stability evaluation method.
RESUMEN
Replacing fossil-based polymers with renewable bio-based polymers is one of the most promising ways to solve the environmental issues and climate change we human beings are facing. The production of new lignocellulose-based polymers involves five steps, including (1) fractionation of lignocellulose into cellulose, hemicellulose, and lignin; (2) depolymerization of the fractionated cellulose, hemicellulose, and lignin into carbohydrates and aromatic compounds; (3) catalytic or thermal conversion of the depolymerized carbohydrates and aromatic compounds to platform chemicals; (4) further conversion of the platform chemicals to the desired bio-based monomers; (5) polymerization of the above monomers to bio-based polymers by suitable polymerization methods. This review article will focus on the progress of bio-based monomers derived from lignocellulose, in particular the preparation of bio-based monomers from 5-hydroxymethylfurfural (5-HMF) and vanillin, and their polymerization methods. The latest research progress and application scenarios of related bio-based polymeric materials will be also discussed, as well as future trends in bio-based polymers.