RESUMEN
OBJECTIVE@#To investigate the clinical effect of unilateral percutaneous vertebroplasty (PVP) combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.@*METHODS@#A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study, all of which were vertebral body compression fractures caused by trauma. According to different treatment methods, they were divided into experimental group and control group. Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group, there were 5 males and 27 females, aged from 63 to 91 years old with an average of (77.59±8.75) years old. Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty, including 7 males and 38 females, aged from 60 to 88 years old with an average of(74.89±7.37) years old. Operation time, intraoperative C-arm X-ray times, anesthetic dosage, bone cement injection amount, bone cement diffusion good and good rate, complications, vertebral height, kyphotic angle (Cobb angle), visual analogue scale(VAS), Oswestry disability index (ODI) and other indicators were recorded before and after surgery, and statistically analyzed.@*RESULTS@#All patients were followed up for 6 to 23 months, with preoperative imaging studies, confirmed for thoracolumbar osteoporosis compression fractures, two groups of patients with postoperative complications, no special two groups of patients' age, gender, body mass index (BMI), time were injured, the injured vertebral distribution had no statistical difference(P>0.05), comparable data. Two groups of patients with bone cement injection, bone cement dispersion rate, preoperative and postoperative vertebral body height, protruding after spine angle(Cobb angle), VAS, ODI had no statistical difference(P>0.05). The operative time, intraoperative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P<0.05). Compared with the traditional bilateral puncture group, the modified unilateral puncture group combined with 3D printing technology had shorter operation time, fewer intraoperative fluoroscopy times and less anesthetic dosage. The height of anterior vertebral edge, kyphosis angle (Cobb angle), VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P<0.05).@*CONCLUSION@#In the treatment of thoracolumbar osteoporotic compression fractures, 3D printing technology is used to improve unilateral puncture PVP, which is convenient and simple, less trauma, short operation time, fewer fluoroscopy times, satisfactory distribution of bone cement, vertebral height recovery and kyphotic Angle correction, and good functional improvement.
Asunto(s)
Masculino , Femenino , Humanos , Persona de Mediana Edad , Anciano , Anciano de 80 o más Años , Fracturas por Compresión/cirugía , Fracturas de la Columna Vertebral/cirugía , Cementos para Huesos , Resultado del Tratamiento , Vertebroplastia/métodos , Cifosis/cirugía , Punciones , Impresión Tridimensional , Tecnología , Fracturas Osteoporóticas/cirugía , Anestésicos , Estudios Retrospectivos , Cifoplastia/métodosRESUMEN
Nine compounds were isolated from the 90% ethanol extract of Salacia polysperma by silica gel, Sephadex LH-20 column chromatography, together with preparative HPLC methods. Based on HR-ESI-MS, MS, 1D and 2D NMR spectral analyses, the structures of the nine compounds were identified as 28-hydroxy wilforlide B(1), wilforlide A(2), 1β,3β-dihydroxyurs-9(11),12-diene(3),(-)-epicatechin(4),(+)-catechin(5),(-)-4'-O-methyl-ent-galloepicatechin(6), 3-hydroxy-1-(4-hydroxy-3-methoxy-phenyl)propan-1-one(7),(-)-(7S,8R)-4-hydroxy-3,3',5'-trimethoxy-8',9'-dinor-8,4'-oxyneoligna-7,9-diol-7'-aldehyde(8), and vanillic acid(9). Compound 1 is a new oleanane-type triterpene lactone. Compounds 1, 3, 4, 7-9 were isolated from the Salacia genus for the first time. All compounds were assayed for their α-glucosidase inhibitory activity. The results suggested that compound 8 exhibited moderate α-glucosidase inhibitory activity, with an IC_(50) value of 37.2 μmol·L~(-1), and the other compounds showed no α-glucosidase inhibitory activity.
Asunto(s)
Salacia/química , alfa-Glucosidasas , Triterpenos/farmacología , Espectroscopía de Resonancia Magnética , Etanol , Estructura MolecularRESUMEN
OBJECTIVE@#To explore the clinical characteristics and genetic etiology of a patient with adolescent-onset hypomyelinated leukodystrophy with atrophy of basal ganglia and cerebellum (H-ABC).@*METHODS@#A patient who was diagnosed with H-ABC in March 2018 at the First Affiliated Hospital of Nanjing Medical University was selected as the study subject. Clinical data was collected. Peripheral venous blood samples of the patient and his parents were collected. The patient was subjected to whole exome sequencing (WES). Candidate variant was verified by Sanger sequencing.@*RESULTS@#The patient, a 31-year-old male, had manifested with developmental retardation, cognitive decline and abnormal gait. WES revealed that he has harbored a heterozygous c.286G>A variant of the TUBB4A gene. Sanger sequencing confirmed that neither of his parents has carried the same variant. Analysis with SIFT online software indicated the amino acid encoded by this variant is highly conserved among various species. This variant has been recorded by the Human Gene Mutation Database (HGMD) with a low population frequency. The 3D structure constructed by PyMOL software showed that the variant has a harmful effect on the structure and function of the protein. According to the guidelines formulated by the American College of Medical Genetics and Genomics (ACMG), the variant was rated as likely pathogenic.@*CONCLUSION@#The c.286G>A (p.Gly96Arg) variant of the TUBB4A gene probably underlay the hypomyelinating leukodystrophy with atrophy of basal ganglia and cerebellum in this patient. Above finding has enriched the spectrum of TUBB4A gene variants and enabled early definitive diagnosis of this disorder.
Asunto(s)
Masculino , Humanos , Adolescente , Adulto , Imagen por Resonancia Magnética , Ganglios Basales/patología , Cerebelo , Atrofia/patología , Mutación , Tubulina (Proteína)/genéticaRESUMEN
Eight compounds were isolated from ethyl acetate fraction of 80% ethanol extract of the hulls of Garcinia mangostana by silica gel, Sephadex LH-20 column chromatography, as well as prep-HPLC methods. By HR-ESI-MS, MS, 1D and 2D NMR spectral analyses, the structures of the eight compounds were identified as 16-en mangostenone E(1), α-mangostin(2), 1,7-dihydroxy-2-(3-methy-lbut-2-enyl)-3-methoxyxanthone(3), cratoxyxanthone(4), 2,6-dimethoxy-para-benzoquinone(5), methyl orselinate(6), ficusol(7), and 4-(4-carboxy-2-methoxyphenoxy)-3,5-dimethoxybenzoic acid(8). Compound 1 was a new xanthone, and compound 4 was a xanthone dimer, compound 5 was a naphthoquinone. All compounds were isolated from this plant for the first time except compounds 2 and 3. Cytotoxic bioassay suggested that compounds 1, 2 and 4 possessed moderate cytotoxicity, suppressing HeLa cell line with IC_(50) va-lues of 24.3, 35.5 and 17.1 μmol·L~(-1), respectively. Compound 4 also could suppress K562 cells with an IC_(50) value of 39.8 μmol·L~(-1).
Asunto(s)
Humanos , Garcinia mangostana/química , Células HeLa , Antineoplásicos , Espectroscopía de Resonancia Magnética , Xantonas/farmacología , Garcinia/química , Extractos Vegetales/química , Estructura MolecularRESUMEN
Aim To study the protective effect of eplerenone on the contralateral kidney in pregnant rats with chronic kidney disease (CKD) and its mechanism. Methods Female Wistar rats were randomly divided into sham-operation group, sham-operation pregnancy group, model group and eplerenone group. The rats in the model group and eplenone group had ligation unilateral ureter, and the rats in the eplenone group were treated with 100 mg • kg
RESUMEN
Amyotrophic lateral sclerosis (ALS) is a fatal neurodegenerative disease which is associated with genetic and environmental factors, though the pathogenesis is still unclear and there is also a lack of effective treatment. With the rapid advance of genetic testing techniques, over 30 genes have been associated with the disease. Some ALS patients harboring genetic variants may present unique clinical characteristics and particular mode of inheritance, but the correlation between genotype and phenotype is still not very clear. Studies have shown that research on the pathogenic genes of ALS is important for the diagnosis and selection of potential drug targets. Here the pathogenic genes of ALS, in particular the newly discovered genes, and their underlying mechanisms are reviewed. The necessity of genetic testing for ALS patients is also stressed.
Asunto(s)
Humanos , Esclerosis Amiotrófica Lateral/genética , Pruebas Genéticas , Genotipo , Enfermedades Neurodegenerativas/genética , FenotipoRESUMEN
Amyotrophic lateral sclerosis is a neurodegenerative disease caused by the loss of motor neurons in the brain and spinal cord. There is currently no effective cure. The emergence of gene therapy brings hope to treatment, which can be achieved by delivering transgenes to replace or correct defective genes, as well as the expression of neurotrophic factors. The vectors of gene therapy can be viral vectors and non-viral vectors. Lentiviral vectors can be used to deliver therapeutic sequences to motor neurons in the central nervous system. Adeno-associated viruses can effectively mediate gene expression and delivery of neurotrophic factors. Gene editing and antisense oligonucleotides therapy are also perspective treatment options. This article summarizes gene therapy for amyotrophic lateral sclerosis from basic experiments and clinical trials.
RESUMEN
OBJECTIVE@#To manufacture a new type of transverse process retractor by using computer-aided design(CAD) combined with 3D printing technology and investigate its clinical application effect.@*METHODS@#A new type of transverse protrusion retractor was developed by CAD combined with 3D printing technology. From September 2018 to September 2019, the new transverse process retractor was applied in clinic. Sixty patients with lumbar single segment lesions who needed treatment by pedicle screw fixation, bone grafting and interbody fusion were divided into new transverse process retractor group and control group, with 30 cases in each group. There were 14 males and 16 females in new type transverse process retractor group, the age was (68.0±4.3) years old on average; lesion segment of 8 cases were L3,4, 9 cases were L4,5, 13 cases were L5S1;5 cases of lumbar disc herniation, 20 cases of lumbar spinal stenosis, 5 cases of degenerative lumbar spondylolisthesis;new transverse process retractor was used to pedicle screw placement. While there were 15 males and 15 females in control group, with an average age of (69.2±4.5) years old;lesion segment of 8 cases were L3,4, 10 cases were L4,5, 12 cases were L5S1;5 cases of lumbar disc herniation, 21 cases of lumbar spinal stenosis, 4 cases of degenerative lumbar spondylolisthesis;the traditional lamina retractor was used for soft tissue pulling and finished pedicle screw placement by freehand. The length of surgical incision, the time required for inserting a single screw, fluoroscopy times, the times of adjusting the positioning needle or screw in insertion process, and the visual analogue scale (VAS) of surgical incision 72 hours after operation were compared between two groups.@*RESULTS@#Using CAD and 3D printing technology, a new type of transverse protrusion retractor was developed quickly. The length of surgical incision, the time required for inserting a single screw, fluoroscopy time, and the times of adjusting the positioning needle or screw in insertion process in new transverse process retractor group were less than those in control group(P<0.05). There was no significant difference in VAS of lumbar incision pain at 72 hours after operation between two groups(P>0.05).@*CONCLUSION@#Using CAD combined with 3D printing technology to develop a new transverse protrusion retractor has the advantages of convenient design, short development cycle and low cost. It provides a new idea for the research and development of new medical devices. The new transverse process retractor has the advantages of easy operation, reliable fixation, less damage to paravertebral muscle, convenient pedicle screw placement, reducing fluoroscopy time and so on.
Asunto(s)
Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Desplazamiento del Disco Intervertebral/cirugía , Dolor de la Región Lumbar , Vértebras Lumbares/cirugía , Tornillos Pediculares , Impresión Tridimensional , Fusión Vertebral , Estenosis Espinal/cirugía , Espondilolistesis/cirugía , Herida Quirúrgica , Resultado del TratamientoRESUMEN
Objective:To investigate the effects of superoxide dismutase 1 (SOD1) mutations G41D and G41S on the cognitive behavior of mice.Methods:The recombinant adeno-associated virus (rAAV) which overexpressed human SOD1WT, SOD1G41S, SOD1G41D and the blank virus without the target gene were constructed, then they were stereotaxic injected into mice bilateral medial prefrontal cortex (mPFC) area respectively.According to the difference of injected virus, they were divided into CONTROL group, SOD1WT group, SOD1G41S group and SOD1G41D group ( n=16 in each group). One month later, open field test, Y-maze spontaneous alternation experiment, three box social interaction experiment and trace fear conditioning test were conducted to observe the effect of mutant gene on cognitive behavior of mice. Results:In the open field test, the movement distance of SOD1WT group((39.67±6.04)m)was significantly higher than that of SOD1G41D group((28.47±6.92)m, P=0.034). In the Y-maze spontaneous alternations experiment, the number of arm entries and actual alternations of arm entries of SOD1WT group((40.56±10.12)times, (32.63±8.19)times)and SOD1G41S group((36.75±9.43)times, (29.06±8.32)times)were significantly higher than those of SOD1G41D group((24.50±11.30)times, (18.38±9.09)times, P<0.05). In the three-compartment social experiment, there was no statistical difference between the residence time of SOD1G41D group in the area containing mouse ((279.08±134.94) s) and the empty metal cage area ((218.54±125.63) s) ( t=1.313, P=0.199). SOD1WT group and SOD1G41S group showed no statistical difference in the residence time in the regions of the unfamiliar mouse 1((253.07±55.60)s, (253.20±57.61)s) and the unfamiliar mouse 2 ((243.44±55.33) s, (239.76±67.49) s) ( P>0.05), and SOD1WT group and SOD1G41S group presented new social barrier.In the test stage of trace fear condition task, the percentage of freezing time of SOD1G41S group was significantly higher than that of other experimental groups and CONTROL group ( P<0.05). Conclusion:SOD1G41S and SOD1G41D have significantly changed the cognitive behavior of mice, and the two types of mutations at the same site have significant differences in the cognitive behavior changes.
RESUMEN
OBJECTIVE@#To explore the application value of 3D printing technology in preoperative surgery plan and intraoperative auxiliary operation for adult kyphoscoliosis deformity.@*METHODS@#The clinical data of 12 adult patients with kyphoscoliosis deformity treated from September 2017 to January 2019 were retrospectively analyzed. There were 3 males and 9 females, aged from 21 to 63 years old with an average of (47.67±13.32) years old. Among them, 4 cases were congenital kyphoscoliosis, 2 cases were old tuberculosis thoracolumbar kyphosis ; 2 cases were idiopathic kyphoscoliosis, 4 cases were degenerative kyphoscoliosis. The CT scan data of the patient's spine was imported into Mimics17.0 software to establish the three dimensional model of the spine, and the spine model was produced by 3D printer. Using the spine model simulated operation, preoperative surgery program planning and formulated a precise surgery, and further analysed postoperative imaging parameters improvement. All the patients were followed up for more than 1 year. Before and after operation and at the last follow-up, the scoliosis Cobb angle, maximum kyphosis Cobb angle, and coronal plane balance (distance between C 7 plumbline and center sacral vertical line, CPL-CSVL), sagittal plane balance (sagittal vertical axis, SVA), pelvic parameters and other related imaging parameters were measured to further evaluate its orthopedic effect.@*RESULTS@#Twelve patients with spine deformity were treated with different osteotomy and internal fixation fusion methods under the guidance of a 1∶1 spine model (pedicle screw placement of 4 patients with severe deformity were assisted by pedicle screw guide plates), nail placement and osteotomy have good effects, no major tissue damage such as blood vessels, nerves and spinal cord during and after surgery, no complications such as cerebrospinal fluid leakage and infection. Preoperative Cobb angle of scoliosis was (56.5±22.5) °, Cobb angle of kyphosis was (65.2±19.5) °, C PL-CSVL was (45.8±16.9) mm, SVA was (48.7±25.4) mm. Postoperative at 4 weeks, Cobb angle of scoliosis was (20.8±11.5) °, and Cobb angle of kyphosis was (22.0±6.6) °, with correction rates of (65.1±9.7)% and (64.6± 10.6)%, respectively ; C PL-CSVL was (22.3±8.9) mm, and SVA was (23.3±13.1) mm, all of which were significantly improved compared with preoperative results. The mean follow-up time was (18.5±7.9) months in 12 patients. At the last follow-up, the Cobb angles of scoliosis and kyphosis were (22.2±10.8) ° and (23.6±7.7) °, respectively, C PL-CSVL was (23.5±10.8) mm, and SVA was (24.7±12.5) mm. The results were statistically significant compared preoperative (0.05).@*CONCLUSION@#The 3D print model can visually and clearly show the vertebral morphology and structure of adult kyphoscolisis and its spatial relationship with the adjacent vertebrae, blood vessels, and nerves, which provides a good and intuitive stereoscopic anatomical structure observation for the individualization of the surgical plan. Pre-simulation of operations to determine the internal fixation, fusion segment and osteotomy orthopedic way, may to provide a reference for actual clinical surgery, and can improve the accuracy and safety of surgery.
RESUMEN
OBJECTIVE@#To evaluate accuracy and safety of individualized 3D printing guided template for thoracolumbar pedicle screw placement in patients with ankylosing spondylitis.@*METHODS@#From January 2016 to September 2019, thoracolumbar spine three-dimensional CT data of 8 patients with ankylosing spondylitis were included, Mimics 17.0 and ideaMaker computer software were applied to design thoracolumbar pedicle screw guided template of patients with AS, physical model of all patients (T-L)were printed by 3D printer, 2 parts in each patient, and divided into guide-plate-assisted screw group (experimental group) and free-hand nail group (control group). Thoracolumbar pedicle screws of both groups were placed by the same spinal surgeon. The accuracy of pedicle screw placement between two groups were evaluated according to results of postoperative CT, the accuracy of the fixation of thoracolumbar pedicle screw was divided into 4 grades, grade 0 and 1 screws were acceptable nails, grade 2 and 3 screws were unacceptable nails. The diameter and length of pedicle screws, the distance between entry point and posterior median line designed by preoperative 3D printing were compared with actual use in operation.@*RESULTS@#Twenty three blocks of thoracolumbar 3D printing screw of ankylosing spondylitis guided templates were designed and printed in guide-plate-assisted screw group, 46 screws were inserted and 44 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (4.20±1.15) min, the frequency of X-ray was (5.00±1.25) times and the average adjustment times of screw and Kirschner needle during screw placement was (1.76±1.32) times. In the control group, 46 nails were placed by traditional surgical method and 30 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (14.67±2.23) min, the frequency of X-ray fluoroscopy was (14.46±2.21) times and the average times of Kirschner needle adjustment was (4.76±3.39) times. The success rates between experimental group and control group were 95.65%(44 / 46) and 56.22%(30 / 46) respectively, and had statistical difference (χ=13.538, 0.05). The operation time of inserting a single screw, the times of X-ray fluoroscopy, and the average times of adjustment screw and Kirschner needle in experimental group were significant less than those in control group(<0.01).@*CONCLUSION@#The personalized guide template assisted the thoracolumbar fixation designed by 3D printing could significantly improve safety, accuracy and efficiency of surgery, especially suitable for thoracolumbar vertebral bodies requiring posterior pedicle screw fixation for fracture or dislocation with AS.
Asunto(s)
Humanos , Fluoroscopía , Tornillos Pediculares , Impresión Tridimensional , Fusión Vertebral , Espondilitis Anquilosante , Cirugía Asistida por ComputadorRESUMEN
The 30th International Symposium on Amyotrophic Lateral Sclerosis-Motor Neuron Disease was held in Perth, Australia from December 4 to 6, 2019. This article mainly introduces the clinical research of this meeting, including epidemiology, non-motor symptoms, auxiliary examinations and biomarkers, etc., while the basic research includes genomics and genetics, protein metabolism abnormalities, neuroimmunity and inflammation, synapse pathology and preclinical treatment strategies,
RESUMEN
The 29th International Symposium on Amyotrophic Lateral Sclerosis (ALS)?Motor Neuron Disease was held in Glasgow from December 7 to 9, 2018. The symposium was divided into 23 topics, with 109 special reports and paper′s exchange and 515 posters exchange. This article briefly introduces some topics of the symposium, involving basic researches, clinical researches and clinical trials. Among these, basic researches include genetics and genomics, axonal degeneration, disease models, and preclinical therapeutic strategies; Clinical researches include epidemiology, clinical progression, cognitive and psychological change, neuropathology, neurophysiology, neuroimaging and biomarkers.
RESUMEN
The 29th International Symposium on Amyotrophic Lateral Sclerosis (ALS)-Motor Neuron Disease was held in Glasgow from December 7 to 9, 2018. The symposium was divided into 23 topics, with 109 special reports and paper′s exchange and 515 posters exchange. This article briefly introduces some topics of the symposium, involving basic researches, clinical researches and clinical trials. Among these, basic researches include genetics and genomics, axonal degeneration, disease models, and preclinical therapeutic strategies; Clinical researches include epidemiology, clinical progression, cognitive and psychological change, neuropathology, neurophysiology, neuroimaging and biomarkers.
RESUMEN
Agarwood is a traditional and precious medicinal material and natural spice in China and other southeast Asian countries.As the head of all spices,agarwood has many pharmacological activities such as analgesia,antidiarrheal,anti-inflammatory and antibacterial effects. Due to its high price and scarce resources,there were just a few previous studies on it,mainly focusing on the chemical compositions of the agarwood essential oil and solvent extract mixture. The components of agarwood oils obtained by supercritical extraction and steam distillation were analyzed by using Gas Chromatography-Mass Spectrometer( GC-MS),and then the agarwood oils compositions and contents were compared between the traditional extraction method and the recently emerging supercritical extraction method. Antioxidant experiments of scavenging DPPH,ABTS,hydroxyl radical,total reducing power and MIC experiments of five kinds of tester strains such as staphylococcus aureus were combined to illustrate the differences between these two kinds of agarwood oils in terms of antioxidant and bacteriostatic activities. The results showed that the main components of agarwood oil were sesquiterpenoids( 68. 68%) in steam distillation extraction method,but sesquiterpenoids( 23. 78%) and chromones( 29. 42%) in supercritical extraction method. Fourteen common components included benzyl acetone,α-santalol,γ-eudesmol,agarospirol and guaiol etc. The antioxidant activity and inhibitory MIC of agarwood oils in supercritical extraction method were better than those in steam distillation method,and the inhibitory effect of agarwood oil on the growth of bacillus subtilis was found for the first time.
Asunto(s)
Antibacterianos/farmacología , Antioxidantes/farmacología , China , Destilación/métodos , Aceites Volátiles/farmacología , Aceites de Plantas/farmacología , Vapor , Thymelaeaceae/química , Madera/químicaRESUMEN
<p><b>Background</b>Duchenne muscular dystrophy (DMD) and Becker muscular dystrophy (BMD) are common X-linked recessive neuromuscular disorders caused by mutations in dystrophin gene. Multiplex polymerase chain reaction (multiplex PCR) and multiplex ligation-dependent probe amplification (MLPA) are the most common methods for detecting dystrophin gene mutations. This study aimed to contrast the two methods and discern the genetic characterization of patients with DMD/BMD in Eastern China.</p><p><b>Methods</b>We collected 121 probands, 64 mothers of probands, and 15 fetuses in our study. The dystrophin gene was detected by multiplex PCR primarily in 28 probands, and MLPA was used in multiplex PCR-negative cases subsequently. The dystrophin gene of the remaining 93 probands and 62 female potential carriers was tested by MLPA directly. In fetuses, multiplex PCR and MLPA were performed on 4 fetuses and 10 fetuses, respectively. In addition, sequencing was also performed in 4 probands with negative MLPA.</p><p><b>Results</b>We found that 61.98% of the subjects had genetic mutations including deletions (50.41%) and duplications (11.57%). There were 43.75% of mothers as carriers of the mutation. In 15 fetuses, 2 out of 7 male fetuses were found to be unhealthy and 2 out of 8 female fetuses were found to be carriers. Exons 3-26 and 45-52 have the maximum frequency in mutation regions. In the frequency of exons individually, exon 47 and exon 50 were the most common in deleted regions and exons 5, 6, and 7 were found most frequently in duplicated regions.</p><p><b>Conclusions</b>MLPA has better productivity and sensitivity than multiplex PCR. Prenatal diagnosis should be applied in DMD high-risk fetuses to reduce the disease incidence. Furthermore, it is the responsibility of physicians to inform female carriers the importance of prenatal diagnosis.</p>
Asunto(s)
Femenino , Humanos , Masculino , Embarazo , China , Distrofina , Genética , Exones , Genética , Eliminación de Gen , Heterocigoto , Reacción en Cadena de la Polimerasa Multiplex , Distrofia Muscular de Duchenne , Genética , Mutación , Genética , Eliminación de SecuenciaRESUMEN
<p><b>OBJECTIVE</b>To analyze the clinical features and genetic cause for a family affected with cerebral autosomal dominant arteriopathy with subcortical infarcts and leukoencephalopathy (CADASIL).</p><p><b>METHODS</b>Clinical manifestations, neuroimaging, and genetic analysis were performed.</p><p><b>RESULTS</b>The main clinical features have included stroke, emotional disturbance and history of migraine without progressive memory impairment. A positive family history was confirmed. Cranial MRI has revealed multi-infarct lesions and white matter hyperintensity involving bilateral basal ganglia, subcortex and brain stem. All such features were in keeping with the diagnosis of CADASIL. A rare 2182C>T mutation in exon 14 of the NOTCH3 gene was identified in all available cases.</p><p><b>CONCLUSION</b>Both clinical and molecular features suggested that the family has been affected with CADASIL.</p>
Asunto(s)
Adulto , Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Trastornos Migrañosos , Genética , Receptor Notch3 , Receptores Notch , GenéticaRESUMEN
Objective To analysis the MRI features of cerebral autosomal dominant arteriopathy with subcortical infarcts and leukoencephalopathy (CADASIL), to improve the understanding of MRI manifestations of this disease. Meth?ods The clinical manifestations, neuroimaging analysis and genetic analysis were performed in the CADASIL pedigree proband and his families. Results Five of six cases were confirmed with C2182T mutation on exon 14 of the NOTCH3, of which three cases were diagnosed by MRI. Brain MRI findings included bilateral symmetric distributed confluent lesions in the subcortical and periventricular white matter in the frontal lobe, hypointensity on T1WI and hyperintensity on both T2WI and T2 FLAIR imaging in four cases. The external capsule was involved in three cases, with hyperintensity on T2WI. Subcortical lacunar lesions (SLLs) were shown in three cases. Lacunar infarction in the basal ganglia and thalamus were presented in four cases. T2WI hyperintensity at the brain stem was found in two cases. Cerebral microbleeds were re?vealed in three cases. There was no O’Sullivan sign in all the six cases. Conclusions There is characteristic change of MRI in CADASIL patients, which may play a very important role in screening these cases.
RESUMEN
<p><b>BACKGROUND</b>Primary biliary cirrhosis (PBC) is a chronic and slowly progressive cholestatic liver disease characterized by destruction of the interlobular bile ducts and a striking female predominance. The aim of this study was to identify associations between estrogen receptor (ESR) gene polymorphisms with the risk of developing PBC and abnormal serum liver tests in a Chinese population.</p><p><b>METHODS</b>Thirty-six patients with PBC (case group) and 35 healthy individuals (control group) from the First Hospital of Jilin University were studied. Whole genomic DNA was extracted from all the participants. Three single-nucleotide polymorphisms (rs2234693, rs2228480, and rs3798577) from ESR1 and two (rs1256030 and rs1048315) from ESR2 were analyzed by a pyrosequencing method. Demographic data and liver biochemical data were collected.</p><p><b>RESULTS</b>Subjects with the T allele at ESR2 rs1256030 had 1.5 times higher risk of developing PBC than those with the C allele (odds ratio [OR] = 2.1277, 95% confidence interval [CI] = 1.1872-4.5517). Haplotypes TGC of ESR1 rs2234693, rs2228480, and rs3798577 were risk factors for having PBC. The C allele at ESR1 rs2234693 was associated with abnormal alkaline phosphatase (OR = 5.2469, 95% CI = 1.3704-20.0895) and gamma-glutamyl transferase (OR = 3.4286, 95% CI = 1.0083-13.6578) levels in PBC patients.</p><p><b>CONCLUSIONS</b>ESR2 rs1256030 T allele may be a significant risk factor for the development of PBC. Screening for patients with gene polymorphisms may help to make early diagnoses in patients with PBC.</p>
Asunto(s)
Adulto , Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Pueblo Asiatico , Estudios de Casos y Controles , Receptor alfa de Estrógeno , Genética , Receptor beta de Estrógeno , Genética , Frecuencia de los Genes , Genética , Predisposición Genética a la Enfermedad , Genética , Haplotipos , Genética , Cirrosis Hepática Biliar , Genética , Polimorfismo de Nucleótido Simple , Genética , Receptores de Estrógenos , GenéticaRESUMEN
Notch signal pathway is closely related to the organism's development and a variety of cancers. Current models available for screening modulators of Notch signal pathway all use mouse Notch protein as substrates and those models which use human Notch protein have not been reported. To make the screen results much more reliable, the authors cloned a truncated form of human Notch1 called N100, and built the screening models for the use of it instead of mouse Notch protein. The models included an in vitro screening model based on the purified gamma-secretase enzyme and a cell model using luciferase reporter system. The screening models then have been verified by the known modulators of Notch signal pathway and the IC50 values have been obtained. The verified models can be used to screen modulators of human Notch signaling pathway effectively and it can lay the foundation for finding new modulators of this kind effectively.