Sensors Layout Optimization Design of Rocket Sled Test System.

The rocket sled, as a ground dynamic test system, combines the characteristics of the wind tunnel test and the flight test. However, some practical factors, such as shock wave interference, ground effect, and high-intensity aerodynamic noise will cause serious interference and even failure of the uniformly distributed sensors during horizontal sliding in a wide speed range. The AGARD HB-2 standard model is employed as the payload to simulate the aerodynamic and aeroacoustic characteristics during the variable acceleration period, aiming to optimize the test sensors layout. It is observed that in the high Mach number flow fields, strong coupling behaviors among complex waves will occur. The peak of wake vortex strength will appear at 1.5 s and gradually diminish over time. In addition, when the vortex between the load and the booster is monitored, its position shifts forward in the subsonic stage, then gradually moves backward and expands in the supersonic stage. Acoustic directivity is pronounced at subsonic and transonic speeds, pointing towards 75° and 135° relative to the sliding speed, respectively. These results can provide technical support for sensor layout and high-precision testing in rocket sled tests.

Craniomaxillofacial landmarks detection in CT scans with limited labeled data via semi-supervised learning.

Background: Three-dimensional cephalometric analysis is crucial in craniomaxillofacial assessment, with landmarks detection in craniomaxillofacial (CMF) CT scans being a key component. However, creating robust deep learning models for this task typically requires extensive CMF CT datasets annotated by experienced medical professionals, a process that is time-consuming and labor-intensive. Conversely, acquiring large volume of unlabeled CMF CT data is relatively straightforward. Thus, semi-supervised learning (SSL), leveraging limited labeled data supplemented by sufficient unlabeled dataset, could be a viable solution to this challenge. Method: We developed an SSL model, named CephaloMatch, based on a strong-weak perturbation consistency framework. The proposed SSL model incorporates a head position rectification technique through coarse detection to enhance consistency between labeled and unlabeled datasets and a multilayers perturbation method which is employed to expand the perturbation space. The proposed SSL model was assessed using 362 CMF CT scans, divided into a training set (60 scans), a validation set (14 scans), and an unlabeled set (288 scans). Result: The proposed SSL model attained a detection error of 1.60 ± 0.87 mm, significantly surpassing the performance of conventional fully supervised learning model (1.94 ± 1.12 mm). Notably, the proposed SSL model achieved equivalent detection accuracy (1.91 ± 1.00 mm) with only half the labeled dataset, compared to the fully supervised learning model. Conclusions: The proposed SSL model demonstrated exceptional performance in landmarks detection using a limited labeled CMF CT dataset, significantly reducing the workload of medical professionals and enhances the accuracy of 3D cephalometric analysis.

Etching process enhanced H2O2 sensing performance of SnO2/Zn2SnO4 with reliable anti-humidity ability.

In this work, sol-gel and chemical etching methods are adopted to synthesize zinc hydroxystannate materials. Cubic tin dioxide and zinc stannate composite materials with a definite structure are successfully prepared at varied annealing temperatures and times by using the synthesized zinc hydroxystannate as a sacrificial template. After a gas sensing test, tin dioxide and zinc stannate composite samples etched at 650 °C and annealed for 4 h exhibit a strong response and outstanding selectivity to hydrogen peroxide. Furthermore, the samples prepared under such conditions demonstrate long-term stability, and also a specified level of tolerance after the humidity stability test. Moreover, because of the simple preparation method and rapid detection of hydrogen peroxide, it is worth noting that samples prepared following the etching process at the 650 °C annealing temperature for 4 h exhibit the significant benefits of tin dioxide and zinc stannate composites. In this modern era, this research emphasizes the sample's potential for the rapid identification and detection of hydrogen peroxide.