Synthesis-on-substrate of quantum dot solids.

Perovskite light-emitting diodes (PeLEDs) with an external quantum efficiency exceeding 20% have been achieved in both green and red wavelengths1-5; however, the performance of blue-emitting PeLEDs lags behind6,7. Ultrasmall CsPbBr3 quantum dots are promising candidates with which to realize efficient and stable blue PeLEDs, although it has proven challenging to synthesize a monodispersed population of ultrasmall CsPbBr3 quantum dots, and difficult to retain their solution-phase properties when casting into solid films8. Here we report the direct synthesis-on-substrate of films of suitably coupled, monodispersed, ultrasmall perovskite QDs. We develop ligand structures that enable control over the quantum dots' size, monodispersity and coupling during film-based synthesis. A head group (the side with higher electrostatic potential) on the ligand provides steric hindrance that suppresses the formation of layered perovskites. The tail (the side with lower electrostatic potential) is modified using halide substitution to increase the surface binding affinity, constraining resulting grains to sizes within the quantum confinement regime. The approach achieves high monodispersity (full-width at half-maximum = 23 nm with emission centred at 478 nm) united with strong coupling. We report as a result blue PeLEDs with an external quantum efficiency of 18% at 480 nm and 10% at 465 nm, to our knowledge the highest reported among perovskite blue LEDs by a factor of 1.5 and 2, respectively6,7.

Broadband and strong visible-light-absorbing cuprous sensitizers for boosting photosynthesis.

Rational construction of broadband and strong visible-light-absorbing (BSVLA) earth-abundant complexes is of great importance for efficient and sustainable solar energy utilization. Herein, we explore a universal Cu(I) center to couple with multiple strong visible-light-absorbing antennas to break the energy level limitations of the current noble-metal complexes, resulting in the BSVLA nonprecious complex (Cu-3). Systematic investigations demonstrate that double "ping-pong" energy-transfer processes in Cu-3 involving resonance energy transfer and Dexter mechanism enable a BSVLA between 430 and 620 nm and an antenna-localized long-lived triplet state for efficient intermolecular electron/energy transfer. Impressively, Cu-3 exhibited an outstanding performance for both energy- and electron-transfer reactions. Pseudo-first-order rate constant of photooxidation of 1,5-dihydroxynaphthalene with Cu-3 can achieve a record value of 190.8 × 10-3 min-1 among the molecular catalytic systems, over 30 times higher than that with a noble-metal photosensitizer (PS) [Ru(bpy)3]2+. These findings pave the way to develop BSVLA earth-abundant PSs for boosting photosynthesis.

Stimulating Phonon Bottleneck Effect in Organic Semiconductors by Charge-Transfer-Mediated J-Aggregation.

Hot carriers rapidly lose kinetic energies on a subpicosecond time scale, posing significant limitations on semiconductors' photon-conversion efficiencies. To slow the hot carrier cooling, the phonon bottleneck effect is constructed prevalently in quantum-confined structures with discrete energy levels. However, the maximum energy separation (ΔEES) between the energy levels is in a range of several hundred meV, leading to unsatisfactory cooling time. To address this, we design a novel organic semiconductor capable of forming intermolecular charge transfer (CT) in J-aggregates, where the lowest singlet excited state (S1) splits into two states due to the significant interplay between the Coulomb interaction and intermolecular CT coupling. The ΔEES between the two states can be adjusted up to 1.02 eV, and an extremely slow carrier cooling process of ∼72.3 ps was observed by femtosecond transient absorption spectroscopy. Moreover, the phonon bottleneck effect was identified in organic materials for the first time, and CT-mediated J-aggregation with short-range interactions was found to be the key to achieving large ΔEES. The significantly prolonged carrier cooling time, compared to <100 fs in the isolated molecule (10-6 M), highlights the potential of organic molecules with diversified aggregation structures in achieving long-lived hot carriers. These findings provide valuable insights into the intrinsic photophysics of electron-phonon scattering in organic semiconductors.

Ultrafast energy transfer dynamics in CsPbBr3 nanoplatelets-BODIPY heterostructure.

Understanding and directing the energy transfer in nanocrystals-chromophore heterostructure is critical to improve the efficiency of their photocatalytic and optoelectronic applications. In this work, we studied the energy transfer process between inorganic-organic molecular complexes composed of cesium halide perovskite nanoplatelets (CsPbBr3 NPLs) and boron dipyrromethene (BODIPY) by photoluminescence spectroscopy (PL), time-correlated single photon-counting (TCSPC) and femtosecond transient absorption spectroscopy. The quenching of PL in CsPbBr3 NPLs occurred simultaneously with the PL enhancement of BODIPY implied the singlet energy transfer process. The rate of energy transfer has been determined by transient absorption spectrum as kET = 3.8 × 109 s-1. The efficiency of Förster energy transfer (FRET) has been quantitatively calculated up to 70%. Our work advances the understanding of the interaction between BODIPY and perovskite nanoplatelets, providing a new solution based on their optoelectronic and photocatalytic applications.

Observation of carrier transfer in a vertical 0D-CsPbBr3/2D-MoS2 mixed-dimensional van der Waals heterojunction.

Two-dimensional transition metal dichalcogenides with outstanding properties open up a new way to develop optoelectronic devices such as phototransistors and light-emitting diodes. Heterostructure with light-harvesting materials can produce many photogenerated carriers via charge and/or energy transfer. In this paper, the ultrafast dynamics of charge transfer in zero-dimensional CsPbBr3 quantum dot/two-dimensional MoS2 van der Waals heterostructures are investigated through femtosecond time-resolved transient absorption spectroscopy. Hole and electron transfers in the ps and fs magnitude at the interfaces between MoS2 and CsPbBr3 are observed by modulating pump wavelengths of the pump-probe configurations. Our study highlights the opportunities for realizing the exciton devices based on quantum dot/two-dimensional semiconductor heterostructures.

Enhanced Performance of CsPbIBr2 Perovskite Solar Cell by Modified Zinc Oxide Nanorods Array with [6,6]-Phenyl C61 Butyric Acid.

Although Metal oxide ZnO is widely used as electron transport layers in all-inorganic PSCs due to high electron mobility, high transmittance, and simple preparation processing, the surface defects of ZnO suppress the quality of perovskite film and inhibit the solar cells' performance. In this work, [6,6]-Phenyl C61 butyric acid (PCBA) modified zinc oxide nanorods (ZnO NRs) is employed as electron transport layer in perovskite solar cells. The resulting perovskite film coated on the zinc oxide nanorods has better crystallinity and uniformity, facilitating charge carrier transportation, reducing recombination losses, and ultimately improving the cells' performance. The perovskite solar cell with the device configuration of ITO/ZnO nanorods/PCBA/CsPbIBr2 /Spiro-OMeTAD/Au delivers a high short circuit current density of 11.83 mA cm-2 and power conversion efficiency of 12.05 %.

Design of BPEA-based derivatives with high singlet fission performance: a theoretical perspective.

The development of singlet fission (SF) is greatly hindered by the severe shortage of the types and numbers of SF materials. Here, essential energy conditions and SF-related competitive processes of a series of BPEA derivatives, which are a kind of new promising SF material, are investigated theoretically. Encouraging advantages and interesting laws of key energy conditions of those derivatives were found and potential BPEA derivatives were predicted. Those derivatives present mild exothermic SF processes with 0.3-0.4 eV free energies (ΔE(S1-2T1)) consistently. Their lowest triplet states (T1) are stable and totally enter into the ideal energy window (≥1.0 eV), which is beneficial for achieving the maximum efficiency of PCE. Their large ΔE(T2-2T1) can suppress the higher-state annihilation of T1 well. The E(S1) and ΔE(S1-2T1) of the derivatives are sensitive to both the slip patterns of the dimer and ending substituents. Terminal substituents with both strong electron-withdrawing and electron-donating abilities can lower E(S1), and decreases in the former are more obvious due to the larger intramolecular charge transfer. Interestingly, it is found firstly that the terminal substituent modulation effect on E(S1) and ΔE(S1-2T1) is more effective when large longitudinal slips are included in their stacking modes. The reason is that the direction of the transition dipole moments (µs1) is along X, and large longitudinal slips will bring about the approach of positive and negative charge centers of monomers, and lead to large Davydov splitting. By further evaluation of important radiation and non-radiation processes, it is predicted that the BPEA-based derivatives, which have rigid -Cl, -Br, or -CN terminals and include large longitudinal slips in their crystal packing, are expected to achieve excellent SF performances. Our work provides useful ideas for developing or optimizing acene-derivative SF materials with high efficiency.

Low-Threshold Blue Quasi-2D Perovskite Laser through Domain Distribution Control.

Quasi-2D perovskites, composed of self-organized quantum well structures, are emerging as gain materials for laser applications. Here we investigate the influence of domain distribution on the laser emission of CsPbCl1.5Br1.5-based quasi-2D perovskites. The use of 2,2-diphenylethylammonium bromide (DPEABr) as a ligand enables the formation of quasi-2D film with a large-n-dominated narrow domain distribution. Due to the reduced content of small-n domains, the incomplete energy transfer from small-n to large-n domains can be greatly addressed. Moreover, the photoinduced carriers can be concentrated on most of the large-n domains to reduce the local carrier density, thereby suppressing the Auger recombination. By controlling the domain distribution, we achieve blue amplified spontaneous emission and single-mode vertical-cavity surface-emitting lasing with low thresholds of 6.5 and 9.2 µJ cm-2, respectively. This work provides a guideline to design the domain distribution to realize low-threshold multicolor perovskite lasers.

Manipulating Local Lattice Distortion for Spectrally Stable and Efficient Mixed-halide Blue Perovskite LEDs.

Mixed-halide perovskites are considered the most straightforward candidate to realize blue perovskite light-emitting diodes (PeLEDs). However, they suffer severe halide migration, leading to spectral instability, which is particularly exaggerated in high chloride alloying perovskites. Here, we demonstrate energy barrier of halide migration can be tuned by manipulating the degree of local lattice distortion (LLD). Enlarging the LLD degree to a suitable level can increase the halide migration energy barrier. We herein report an "A-site" cation engineering to tune the LLD degree to an optimal level. DFT simulation and experimental data confirm that LLD manipulation suppresses the halide migration in perovskites. Conclusively, mixed-halide blue PeLEDs with a champion EQE of 14.2 % at 475 nm have been achieved. Moreover, the devices exhibit excellent operational spectral stability (T50 of 72 min), representing one of the most efficient and stable pure-blue PeLEDs reported yet.

Efficient Organic Solar Cells Enabled by Simple Non-Fused Electron Donors with Low Synthetic Complexity.

Fused-ring electron donors boost the efficiency of organic solar cells (OSCs), but they suffer from high cost and low yield for their large synthetic complexity (SC > 30%). Herein, the authors develop a series of simple non-fused-ring electron donors, PF1 and PF2, which alternately consist of furan-3-carboxylate and 2,2'-bithiophene. Note that PF1 and PF2 present very small SC of 9.7% for their inexpensive raw materials, facile synthesis, and high synthetic yield. Compared to their all-thiophene-backbone counterpart PT-E, two new polymers feature larger conjugated plane, resulting in higher hole mobility for them, especially a value up to ≈10-4 cm2 V-1 ·s for PF2 with longer alkyl side chain. Meanwhile, PF1 and PF2 exhibit larger dielectric constant and deeper electronic energy level versus PT-E. Benefiting from the better physicochemical properties, the efficiencies of PF1- and PF2-based devices are improved by ≈16.7% and ≈71.3% relative to that PT-E-based devices, respectively. Furthermore, the optimized PF2-based devices with introducing PC71 BM as the third component deliver a higher efficiency of 12.40%. The work not only indicates that furan-3-carboxylate is a simple yet efficient building block for constructing non-fused-ring polymers but also provides a promising electron donor PF2 for the low-cost production of OSCs.

Low amplified spontaneous emission threshold from 2-thiophenemethylammonium quasi-2D perovskites via phase engineering.

Quasi-2D Ruddlesden-Popper perovskites attract great attention as an optical gain media in lasing applications due to their excellent optoelectronic properties. Herein, a novel quasi-2D Ruddlesden-Popper perovskite based on 2-thiophenemethylammonium (ThMA) is synthesized by a facile solution-processed method. In addition, an anti-solvent treatment method is proposed to tune the phase distribution, and preferential orientation of quasi-2D (ThMA)2Csn-1PbnBr3n+1 thin films. The large-n-dominated narrow domain distribution improves the energy transfer efficiency from small-n to large-n phases. Also, the highly oriented nanocrystals facilitate the efficient Förster energy transfer, beneficial for the carrier population transfer. Furthermore, a green amplified spontaneous emission with a low threshold of 13.92 µJ/cm2 is obtained and a single-mode vertical-cavity laser with an 0.4 nm linewidth emission is fabricated. These findings provide insights into the design of the domain distribution to realize low-threshold multicolor continuous-wave or electrically driven quasi-2D perovskites laser.

Efficient Dion-Jacobson perovskite light-emitting diodes via mixed cation engineering.

Quasi-two-dimensional (quasi-2D) perovskites with high exciton binding energy (Eb) can confine carriers to form an energy funnel cascade, accelerate carrier localization to the emitting domain, and decrease nonradiative recombination loss. Herein, it is shown that partially alloying Cs+ cations into formamidinium (FA)-based Dion-Jacobson (DJ) perovskites and adjusting the stoichiometric ratio can simultaneously modify the tolerance factor, decrease the phase formation enthalpy, improve the morphology, modulate the phase distribution, and boost the current efficiency. By incorporating CsBr to substitute for some of the FABr, perovskite films with narrower phase distributions and fewer defects are obtained, and the current efficiency is boosted from 18.2 to 25.3 cd/A. A high current efficiency of 42.1 cd/A, a record (as far as we are aware) external quantum efficiency (EQE) of 10.5%, and a maximum luminance of 18600 cd/m2 with an emission peak at 529 nm are obtained when the Lewis base passivation agent TPBi is dissolved in the antisolvent. This is the first time, to the best of the authors' knowledge, that efficient 1,4-phenyldimethylammonium dibromide (PHDMADBr)-based green-light DJ perovskite light emitting diodes (PeLEDs) based on mixed Cs+ and FA+ cations have been fabricated.

Hot excitons cooling and multiexcitons Auger recombination in PbS quantum dots.

In the past few years, lead chalcogenide quantum dots (QDs) have attracted attention as a new system with a strong quantum confinement effect. In this paper, the hot-excitons cooling and Auger recombination of multiexcitons in PbS QDs are investigated by the femtosecond time-resolved transient absorption spectroscopy. The results show that the excitons dynamics in PbS QDs are closely related to the pump-photon energy and pump-pulse energy. Multiexcitons generate when the excess energy of the absorbed photons is larger than the bandgap energy in PbS QDs. The hot-excitons cooling lifetime increases but the Auger recombination lifetime decreases as the pump-photon energy and the pump-pulse energy increase. Besides, there is a competitive relation between multiple-excitons generation and hot-excitons cooling. The dynamics results of the formation and relaxation of multiexcitons in PbS QDs would shed light on the further understanding of the interaction between excitons and photons in the optoelectronic application based on PbS QDs.

Multiexciton dynamics in CsPbBr3nanocrystals: the dependence on pump fluence and temperature.

Multiexcitons generation is a process of generating electron-hole pairs in nanostructured semiconductors by absorbing a single high-energy photon. The multiexciton process is essential for the performance of optoelectronic devices based on perovskite nanomaterials. In this paper, ultrafast time-resolved transient absorption spectroscopy is used to study the ultrafast dynamics of CsPbBr3nanocrystals. It is found that the multiexcitons Auger recombination lifetime increases with the decrease of pump fluence, while it is on the contrary for the hot carrier cooling time. The increase in the number of photons absorbed by each nanocrystal under high pump fluence slows down the relaxation of hot carriers to the band edge. The hot carrier cooling lifetime increases from 0.25 to 0.85 ps when the pump fluence increases from 6 to 127µJ cm-2. Temperature-dependent transient absorption spectroscopy exhibits that the relaxation process of hot carriers slows down sharply when the lattice temperature decreases from 280 to 80 K. Moreover, the exciton binding energy 46 meV of CsPbBr3nanocrystals is obtained by temperature-dependent steady-state photoluminescence spectroscopy. These findings provide insights for applications such as solar cells and light-emitting devices based on CsPbBr3nanocrystals.

A Chiral Reduced-Dimension Perovskite for an Efficient Flexible Circularly Polarized Light Photodetector.

Chiral quasi-2D perovskite single crystals (SCs) were investigated for their circular polarized light (CPL) detecting capability. Quasi-2D chiral perovskites, [(R)-ß-MPA]2 MAPb2 I7 ((R)-ß-MPA=(R)-(+)-ß-methylphenethylamine, MA=methylammonium), have intrinsic chirality and the capability to distinguish different polarization states of CPL photons. Corresponding quasi-2D SCs CPL photodetector exhibit excellent detection performance. In particular, our device responsivity is almost one order of magnitude higher than the reported 2D perovskite CPL detectors to date. The crystallization dynamics of the film were modulated to facilitate its carrier transport. Parallel oriented perovskite films with a homogeneous energy landscape is crucial to maximize the carrier collection efficiency. The photodetector also exhibits superior mechanical flexibility and durability, representing a promising candidate for sensitive and robust CPL photodetectors.

Study on Dissociation Properties and Spectra of Halon 1301 in External Electric Field.

Halon-1301 (CF3Br) can make Br radicals with UV radiation, which poses a great threat to the ozone layer in the atmosphere. Necessary methods should be taken for the degradation of the exhausts of Halon-1301. In this paper, density functional (DFT) theory at B3LYP/6-311G++(d,p) level are employed for the study of dissociation properties and spectra of Halon-1301 in external electric field, including bond length, total energy, HOMO-LUMO energy gap, infrared spectra and dissociation potential energy surface (PES). The obtained results show that, with gradually increasing the external field from 0 to 0.03 a.u. along the molecular axis Z (C­Br bond direction), the total energy decreases, while the dipole moment decreases at the beginning and then increases. With the climbing of the field, HOMO-LUMO energy gap increases, and C­Br bond length increases while C­F bond length decreases. The variations of vibrational frequency and intensity of molecular IR spectra in external electric field are also investigated. Further studies show that with increasing the external electric field from 0 to 0.03 a.u., the dissociation PES along C­Br bond becomes unbound with disappearing of the barrier for the dissociation. The external electric field of 0.03 a.u. is sufficient to induce the degradation of CF3Br with C­Br bond breaking. Such results provide an important reference for the degradation of Halons via the external electric field.

Visualizing competing intersystem crossing and internal conversion with a complementary measurement.

A complementary measurement method based on a home-built double-sided velocity map imaging setup is introduced. This method can simultaneously obtain time-resolved photoelectron imaging and fragment ion imaging. It has been successfully applied to investigate the ultrafast dynamics of the second singlet electronically excited state (S2) in m-xylene. Time-resolved photoelectron and ion signals derived from the initial populated S2 state are tracked following two-photon absorption of a pump pulse. Time-of-flight mass spectra (TOFMS) show that there are dominant parent ions and one fragment ions with methyl loss during such a process. According to the measured photoelectron images and fragment ions images, transient kinetic energy distributions and angular distributions of the generated photoelectrons and fragments are obtained and analyzed. Compared to stand-alone photoelectron imaging, the obtained fragment ion imaging is powerful for further understanding the mechanisms especially when the dissociation occurs during the pump-probe ionization. Two competing channels intersystem crossing T3←S2 and internal conversion S1←S2 are attributed to the deactivation of the S2 state. A lifetime of ∼50 fs for the initially excited S2 state, of ∼276 fs for the secondary populated S1 state, and of 5.76 ps for the T3 state is inferred.

Lipocalin 2 Upregulation Protects Hepatocytes from IL1-ß-Induced Stress.

BACKGROUND: Lipocalin 2 (LCN2), a protein primarily produced by hepatocytes, is highly upregulated under various conditions that induce cellular stress, such as intoxication, infection or inflammation. However, the precise biological functions and underlying mechanisms of LCN2 in hepatocytes remains unknown. METHODS: Hepatocyte stress was successfully induced by treating Huh7 cells with interleukin-1ß (IL-1ß). Interleukin-6 (IL-6), Tumor Necrosis Factor-α (TNF-α) and LCN2 levels were measured in IL-1ß treated Huh7 cells and supernatant. Additionally, microarray analysis was conducted to identify genes differentially expressed in LCN2-silenced and control Huh7 cells. RESULTS: TNF-α, IL-6 and LCN2 were significantly elevated in Huh7 cells after IL-1ß) treatment. In LCN2-silenced Huh7 cells, expression of IL-6 and TNF-α was significantly increased when compared with the expression levels of control Huh7 cells. Furthermore, differentially expressed genes were observed between the LCN2-silenced and control cells. Microarray analysis indicated that LCN2 acted by influencing genes involved in protein metabolism, stress response, cell cycle and proliferation. CONCLUSIONS: Our results suggest that LCN2 upregulation protects hepatocytes from IL-1ß-induced stress. Additionally, our microarray analysis of LCN2-silenced and control cells provides a better understanding of the mechanisms that may be influenced by LCN2 induction.

Eliminating Halogen Vacancies Enables Efficient MACL-Assisted Formamidine Perovskite Solar Cells.

Methylammonium chloride (MACl) additive is almost irreplaceable in high-performance formamidine perovskite photovoltaics. Nevertheless, Some of the problems that can arise from adding MACl are rarely mentioned. Herein, it is proposed for the first time that the addition of MACl would cause the non-stoichiometric ratio in the perovskite film, resulting in the halogen vacancy. It is demonstrated that the non-synchronous volatilization of methylamine cations and chloride ions leads to the formation of halogen vacancy defects. To solve this problem, the NH4 HCOO is introduced into the perovskite precursor solution to passivate the halogen vacancy. The HCOO- ions have a strong force with lead ions and can fill the halogen vacancy defects. Consequently, the champion devices' power conversion efficiency (PCE) can be improved from 21.23% to 23.72% with negligible hysteresis. And the unencapsulated device can still retain >90% of the initial PCE even operating in N2 atmosphere for over 1200 h. This work illustrates another halogen defect source in the MACl-assisted formamidine perovskite photovoltaics and provides a new route to obtain high-performance perovskite solar cells.

Asymmetric Π-Bridge Engineering Enables High-Permittivity Benzo[1,2-B:4,5-b']Difuran-Conjugated Polymer for Efficient Organic Solar Cells.

Organic solar cells (OSCs) exhibit complex charge dynamics, which are closely correlated with the dielectric constant (ɛr ) of photovoltaic materials. In this work, a series of novel conjugated copolymers based on benzo[1,2-b:4,5-b']difuran (BDF) and benzotriazole (BTz) is designed and synthesized, which differ by the nature of π-bridge from one another. The PBDF-TF-BTz with asymmetric furan and thiophene π-bridge demonstrates a larger ɛr of 4.22 than PBDF-dT-BTz with symmetric thiophene π-bridge (3.15) and PBDF-dF-BTz with symmetric furan π-bridge (3.90). The PBDF-TF-BTz also offers more favorable molecular packing and appropriate miscibility with non-fullerene acceptor Y6 than its counterparts. The corresponding PBDF-TF-BTz:Y6 OSCs display efficient exciton dissociation, fast charge transport and collection, and reduced charge recombination, eventually leading to a power conversion efficiency of 17.01%. When introducing a fullerene derivative (PCBO-12) as a third component, the PBDF-TF-BTz:Y6:PCBO-12 OSCs yield a remarkable FF of 80.11% with a high efficiency of 18.10%, the highest value among all reported BDF-polymer-based OSCs. This work provides an effective approach to developing high-permittivity photovoltaic materials, showcasing PBDF-TF-BTz as a promising polymer donor for constructing high-performance OSCs.