Antibacterial Polysiloxane Polymers and Coatings for Cochlear Implants.

Within this study, new materials were synthesized and characterized based on polysiloxane modified with different ratios of N-acetyl-l-cysteine (NAC) and crosslinked via UV-assisted thiol-ene addition, in order to obtain efficient membranes able to resist bacterial adherence and biofilm formation. These membranes were subjected to in vitro testing for microbial adherence against S. pneumoniae using standardized tests. WISTAR rats were implanted for 4 weeks with crosslinked siloxane samples without and with NAC. A set of physical characterization methods was employed to assess the chemical structure and morphological aspects of the new synthetized materials before and after contact with the microbiological medium.

Color Modifications of a Maxillofacial Silicone Elastomer under the Effect of Cigarette Smoke.

Although it is known (from the observations of medical professionals) that cigarette smoke negatively affects maxillofacial prostheses, especially through staining/discoloration, systematic research in this regard is limited. Herein, the color modifications of M511 maxillofacial silicone, unpigmented and pigmented with red or skin tone pigments, covered with mattifiers, or with makeup and mattifiers, and directly exposed to cigarette smoke, were investigated by spectrophotometric measurements in the CIELab and RGB color systems. The changes in color parameters are comparatively discussed, showing that the base silicone material without pigmentation and coating undergoes the most significant modifications. Visible and clinically unacceptable changes occurred after direct exposure to only 20 cigarettes. By coating and application of makeup, the material is more resistant to color changes, which suggests that surface treatments provide increased protection to adsorption of the smoke components. The dynamic water vapor sorption (DVS) measurements indicate a decrease of the sorption capacity in pigmented versus unpigmented elastomers, in line with the changes in color parameters.

Silicones for Maxillofacial Prostheses and Their Modifications in Service.

The biomedical applications of silicones are countless due to their outstanding properties. In dentistry, silicone for maxillofacial and plastic surgery has become indispensable, from both physiological and aesthetic points of view. In this mini-review, silicone materials for dentistry and facial prostheses are discussed, focusing on their properties and alterations when exposed for long periods to different environments. A significant number of studies reported in the literature have been conducted in vitro, mimicking some of the main degradative factors which have been identified as triggers for discoloration and deterioration of the mechanical properties. Among these, in artificial aging and accelerated natural aging studies, UV radiation is considered the most important. Other weathering factors, biological contamination, and disinfection agents may have dramatic effects as well. Several general properties of silicones are described at the beginning, with a focus on biocompatibility, cross-linking mechanisms, and applications in dentistry and maxillofacial prosthetics. We discuss the ongoing cross-linking and/or possible exudation after manufacturing, which also affects the stability of the prosthesis over time, and possibly the patient. Next, the main environmental factors that affect the prostheses in service are presented, including the role of cigarettes smoke, which has been discussed very little so far. A few aspects, such as biofilm formation, its negative effects, and proposed solutions to overcome this phenomenon regarding silicones, are also described. We conclude by proposing a set of topics for future research and development based on the gaps that have been identified in the literature. Although silicones are probably irreplaceable in maxillofacial prosthetics, improvements in terms of base materials, additives, surface treatments, and maintenance are possible and necessary for long-lasting and safer prostheses.

The Effect of Cigarettes Smoke on the Color and Properties of a Silicone for Maxillofacial Prostheses.

Although deterioration of silicone maxillofacial prostheses is severely accentuated in smoking patients, the phenomenon has not been systematically studied. To address a gap in the literature concerning the stability of maxillofacial prostheses during service, in this contribution, the effect of cigarette smoke on the aspect and physical properties of M511 silicone elastomer was evaluated. The aspect, surface, and overall properties of the silicone material, pigmented or not, were followed by AFM, color measurements, FTIR, water contact angle measurements, TGA-DTG and DSC, hardness and compression stress-strain measurements. The types of the contaminants adsorbed were assessed by XRF, ESI-MS, MALDI-MS, and NMR spectral analyses. Important modifications in color, contact angle, surface roughness, local mechanical properties, and thermal properties were found in the silicone material for maxillofacial prostheses after exposure to cigarettes smoke. The presence of lead, nicotine, and several other organic compounds adsorbed into the silicone material was emphasized. Slight decrease in hardness and increase in Young's modulus was found. The combined data show important impact of cigarette smoke on the silicone physical properties and could indicate chemical transformations by secondary cross-linking. To our knowledge, this is the first study making use of complementary physical methods to assess the effect of cigarette smoke on the aspect and integrity of silicone materials for maxillofacial prostheses.

Polydimethylsiloxane-indomethacin blends and nanoparticles.

A series of blends of polydimethylsiloxane (PDMS) and indomethacin (IMC), containing 20-80 wt.% IMC were obtained and characterized by differential scanning calorimetry, Fourier transform-infrared spectroscopy, and powder X-ray diffraction in order to observe the mutual influence of the two components. The main thermal transitions of PDMS remained un-changed. Both the solvent (tetrahydrofuran, THF) and the PDMS influenced the crystalline form of IMC. The blends were subsequently re-dissolved in THF, with or without cross-linking reagents added and precipitated into diluted aqueous solutions of siloxane-based surfactants. The resulted nanoparticles were analyzed by dynamic light scattering and scanning electron microscopy. Most of the particles had diameters between 200 and 300 nm. The surfactants, the IMC content and the cross-linking influenced the particles size and polydispersity, as well as the nanoparticle yield. The maximum drug release from selected aqueous formulations was 30%.

Emulsion Gels as Precursors for Porous Silicones and All-Polymer Composites-A Proof of Concept Based on Siloxane Stabilizers.

In spite of its versatility, the emulsion templating method is rather uncommon for the preparation of porous silicones. In this contribution, two siloxane-containing stabilizers, designed to be soluble in polar (water) and non-polar (toluene) solvents, respectively, were used in low concentrations to produce stable emulsions, wherein polysiloxane gels were obtained by UV-photoinitiated thiol-ene click cross-linking. The stabilizers exhibited negative interfacial tension, as measured by Wilhelmy plate tensiometry. The emulsion gels evolved into porous silicones (xerogels), with tunable morphology and properties. According to TEM and SEM investigations, the emulsion template was preserved in the final materials. Several parameters (e.g., the structure of the polysiloxane precursors, composition of the emulsion gels, nature of the continuous phase, cross-linking conditions, or additives) can be varied in order to obtain porous elastic materials with desired properties, such as Janus membranes, absorbent monoliths, all-polymer porous composites, or silicone-swollen gels. The feasibility of these types of materials was tested, and exemplary porous silicones were briefly characterized by contact angle measurements, mechanical testing, and absorption tests. The proposed method is simple, fast, and economic, uses very little amounts of stabilizers, and can be adjusted as a green technique. In this contribution, all the silicon-based materials with a convenient design were prepared in house.

Functionalized Mesoporous Silica as Doxorubicin Carriers and Cytotoxicity Boosters.

Mesoporous silica nanoparticles (MSNs) bearing methyl, thiol or glucose groups were synthesized, and their encapsulation and release behaviors for the anticancer drug Doxorubicin (Dox) were investigated in comparison with nonporous homologous materials. The chemical modification of thiol-functional silica with a double bond glucoside was completed for the first time, by green thiol-ene photoaddition. The MSNs were characterized in terms of structure (FT-IR, Raman), morphology (TEM), porosity (nitrogen sorption-desorption) and Zeta potential measurements. The physical interactions responsible for the Dox encapsulation were investigated by analytic methods and MD simulations, and were correlated with the high loading efficiency of MSNs with thiol and glucose groups. High release at pH 5 was observed in most cases, with thiol-MSN exhibiting 98.25% cumulative release in sustained profile. At pH 7.4, the glucose-MSN showed 75.4% cumulative release, while the methyl-MSN exhibited a sustained release trend. The in vitro cytotoxicity was evaluated on NDHF, MeWo and HeLa cell lines by CellTiter-Glo assay, revealing strong cytotoxic effects in all of the loaded silica at low equivalent Dox concentration and selectivity for cancer cells. Atypical applications of each MSN as intravaginal, topical or oral Dox administration route could be proposed.

From Amorphous Silicones to Si-Containing Highly Ordered Polymers: Some Romanian Contributions in the Field.

Polydimethylsiloxane (PDMS), in spite of its well-defined helical structure, is an amorphous fluid even at extremely high molecular weights. The cause of this behavior is the high flexibility of the siloxane backbone and the lack of intermolecular interactions attributed to the presence of methyl groups. These make PDMS incompatible with almost any organic or inorganic component leading to phase separation in siloxane-siloxane copolymers containing blocks with polar organic groups and in siloxane-organic copolymers, where dimethylsiloxane segments co-exist with organic ones. Self-assembly at the micro- or nanometric scale is common in certain mixed structures, including micelles, vesicles, et cetera, manifesting reversibly in response to an external stimulus. Polymers with a very high degree of ordering in the form of high-quality crystals were obtained when siloxane/silane segments co-exist with coordinated metal blocks in the polymer chain. While in the case of coordination of secondary building units (SBUs) with siloxane ligands 1D chains are formed; when coordination is achieved in the presence of a mixture of ligands, siloxane and organic, 2D structures are formed in most cases. The Romanian research group's results regarding these aspects are reviewed: from the synthesis of classic, amorphous silicone products, to their adaptation for use in emerging fields and to new self-assembled or highly ordered structures with properties that create perspectives for the use of silicones in hitherto unexpected areas.

Photo-oxidative degradation of doxorubicin with siloxane MOFs by exposure to daylight.

Doxorubicin (DOX) is a chemotherapeutic agent from anthracycline class, which acts unselectively on all cells; thus, it may have genotoxic and/or mutagenic effects and cause serious environmental problems. Herein, the decomposition of a diluted solution of DOX hydrochloride for injection has been investigated under photo-oxidative conditions, in ambient light and without pH modification, using hydrogen peroxide as oxidizing agent and hydrophobic siloxane-based metal-organic frameworks (MOFs) as heterogeneous catalysts. The kinetics of the photodegradation process was followed by UV-Vis spectroscopy and by ESI-MS. According to UV-Vis data, two pseudo-first-order kinetic steps describe the process, with rate constants in the order of 10-3-10-2 min-1 for the rate-determining one. ESI-MS provided more accurate information, with a rate constant of 2.6 · 10-2 min-1 calculated from the variation of DOX ion abundance. Complete decomposition of DOX was achieved after 120 min in the shade and after only 20 min by exposure to sunlight. The analysis of the residual waters by mass spectrometry and 1D and 2D NMR spectroscopy showed complete disappearance of DOX in all cases, excluded any anthracycline species, which are destroyed in the tested conditions, and proved formation of an un-harmful compound-glycerol, while no trace of metal was detected by XRF. Preliminary data also showed decomposition of oxytetracycline in similar conditions. By this study, we bring into attention a less-addressed pollution issue and we propose a mild and effective method for the removal of drug emerging pollutants.

Assessment of chemicals released in the marine environment by dielectric elastomers useful as active elements in wave energy harvesters.

A series of elastomers, either natural or synthetic (some of them commercial, while others prepared in the laboratory), suitable for use as active elements in devices for wave energy harvesting, were evaluated concerning their behavior and effects on the marine environment. In this aim, the elastomer films, initially evaluated regarding their aspect, structure, surface wettability, and tolerance of microorganisms growth, were immersed in synthetic seawater (SSW) within six months for assessing compounds released. There were analyzed the changes occurred both in the elastomers and salt water in which they were immersed. For this, water samples taken at set time intervals were analyzed by using a sequence of sensitive spectral techniques: UV-vis, IR, and in relevant cases 1H NMR and electrospray ionization mass spectrometry (ESI-MS), able to detect and identify organic compounds, while after six months, they were also investigated from the point of view of aspect, presence of metal traces, pH, and biological activity. The changes in aspect, structure and morphology of the dielectric films at the end of the dipping period were also evaluated by visual inspection, IR spectroscopy by using spectral subtraction method, and SEM-EDX technique.

Correction: Magnetic properties of the seven-coordinated nanoporous framework material Co(bpy)1.5(NO3)2 (bpy = 4,4'-bipyridine).

Correction for 'Magnetic properties of the seven-coordinated nanoporous framework material Co(bpy)1.5(NO3)2 (bpy = 4,4'-bipyridine)' by Elena Bartolomé et al., Dalton Trans., 2012, 41, 10382-10389.

From iron coordination compounds to metal oxide nanoparticles.

Various types, shapes and sizes of iron oxide nanoparticles were obtained depending on the nature of the precursor, preparation method and reaction conditions. The mixed valence trinuclear iron acetate, [Fe2IIIFeIIO(CH3COO)6(H2O)3]·2H2O (FeAc1), µ3-oxo trinuclear iron(III) acetate, [Fe3O(CH3COO)6(H2O)3]NO3∙4H2O (FeAc2), iron furoate, [Fe3O(C4H3OCOO)6(CH3OH)3]NO3∙2CH3OH (FeF), iron chromium furoate, FeCr2O(C4H3OCOO)6(CH3OH)3]NO3∙2CH3OH (FeCrF), and an iron complex with an original macromolecular ligand (FePAZ) were used as precursors for the corresponding oxide nanoparticles. Five series of nanoparticle samples were prepared employing either a classical thermal pathway (i.e., thermal decomposition in solution, solvothermal method, dry thermal decomposition/calcination) or using a nonconventional energy source (i.e., microwave or ultrasonic treatment) to convert precursors into iron oxides. The resulting materials were structurally characterized by wide-angle X-ray diffraction and Fourier transform infrared, Raman, energy-dispersive X-ray, and X-ray fluorescence spectroscopies, as well as thermogravimetric analysis. The morphology was characterized by transmission electron microscopy, atomic force microscopy and dynamic light scattering. The parameters were varied within each route to fine tune the size and shape of the formed nanoparticles.

Magnetic properties of the seven-coordinated nanoporous framework material Co(bpy)1.5(NO3)2 (bpy = 4,4'-bipyridine).

The magnetic properties of the porous metal-organic complex Co(bpy)(1.5)(NO(3))(2) (bpy = 4,4'-bipyridine), investigated by SQUID magnetometry, EPR and heat capacity measurements, are reported. The tongue-and-groove structure of this complex is formed by the assembly of T-shaped building blocks, where each Co is bound to three bpy ligands. Co(II) is hepta-coordinated by three N atoms from the bpy units, and four O atoms from two nitrate groups. Experimental results showed a large crystal field effect induced anisotropy with a zero field splitting of Δ = 198 K between the ground and excited Kramers doublets, a factor of two larger than previously reported values in Co(II) hepta-coordinated complexes. EPR revealed orthorhombic crystal field anisotropy, with gyromagnetic principal values of g(1)* = 6.1, g(2)* = 4.2 and g(3)* = 2.2, in an S* = 1/2 effective spin on the ground state Kramers doublet. Ab initio simulations allowed us to assign the anisotropy easy axis of magnetization to the binary symmetry axis of the molecule, aligned with the Co-N apical direction of the T-block.