Unusual Endovascular Treatment of Iliac Occlusive Disease With a Physician-Modified Endograft to Preserve a Transplant Renal Artery.

PURPOSE: We describe the feasibility and early results of iliac stenting using a physician-modified endograft (PMEG) to preserve a transplant renal artery in patient with iliac occlusive disease. CASE REPORT: A 70-year-old male patient, with sub-occlusive left common iliac artery stenosis at the level of the transplanted kidney arterial anastomosis, presented with left critical limb ischemia (CLI) and pseudo-transplant renal artery stenosis (pseudo-TRAS) symptoms. He was treated with a physician-modified fenestrated covered stent introduced percutaneously via ipsilateral femoral artery after failure of simple angioplasty (percutaneous transluminal angioplasty, PTA). The modified graft was created by performing a square fenestration graftotomy on a Medtronic iliac limb stent graft (Medtronic Cardiovascular, Santa Rosa, CA, USA). The procedure was technically successful with no intraoperative complications. Procedural time was 110 minutes, including 35 minutes for device modification. On short-term follow-up, the patient had early improvement of renal function and resolution of CLI. The iliac and transplant renal artery remained patent with no sign of stent migration or kinking on 6 months surveillance computed tomography angiography and 1 year color Doppler ultrasonography. CONCLUSION: Use of PMEG to preserve visceral branches in occlusive iliac disease is a feasible endovascular technique with encouraging technical success and satisfying early results.

Endovascular aortic repair with the Gore Excluder Conformable endograft in severe neck angulation: Preliminary experience and technical aspects.

OBJECTIVES: Endovascular procedures are now the standard of care for endovascular aortic aneurysm repair but treatment of hostile proximal neck anatomy is still challenging. New endografts were brought to the market specifically designed to accommodate severe neck angulation. Authors describe a preliminary experience and early results using the Gore Excluder Conformable endograft (W. L. Gore & Associates, Flagstaff, Ariz) and its active control system in severe neck angulation with a standardized technical approach to achieve precise deployment in this hostile anatomy. METHODS: From June 2019 to May 2020, five patients with abdominal aortic aneurysm and severe neck angulation (≥70°) were treated with the Gore Excluder Conformable endograft at two different centers. Deployment of this endograft in this kind of anatomy should be aggressive starting over the level of renal arteries due to risk of distal migration downward on the external curvature and difficulty in upward repositioning. Authors suggested a standard technique with a routine through-and-through axillary-femoral approach, using a floppy guidewire together with preventive cannulation of the lower renal artery if a short neck (<15 mm) is associated. RESULTS: Endovascular aortic procedures were successfully completed in all patients. Final deployment of the stent graft using our standardized technical approach was extremely precise in all cases even if redeployment of the graft was necessary in all cases. No other secondary procedures were needed. At 30 days, no type IA endoleak was recorded and no aneurysm-related secondary procedures were performed. Median follow-up for this group of patients was 5.2 months (range 1-11). Early results revealed no type IA endoleak and no migration at Ct angiogram. No aneurysm-related secondary procedures were required. CONCLUSION: Routine use of through-and-through axillary-femoral guidewire associated with selective pre-cannulation of the lower renal artery allows a precise deployment of the Gore Excluder Conformable endograft in difficult anatomies possibly affecting early outcomes.

Endovascular Aortic Repair with the "Step-by-Step" Deployment of the Endurant Stent-Graft System in Severe Neck Angulation: Technique and Review of the Literature.

OBJECTIVES: To describe a new technique based on a different deployment of the Endurant Stent-Graft System (Medtronic Cardiovascular, Santa Rosa, CA) during endovascular aortic aneurysm repair to guarantee a more precise deployment in presence of severe neck angulation (SNA). TECHNIQUE: The "step-by-step" deployment technique consists of an alternate partial release of the main body and of the free-flow suprarenal stents to approximate the radiopaque markers of the graft fabric to the aortic wall, obtaining a more precise delivery, reducing the possibility of downward dislodgments along the external curve of the infrarenal angle and asymmetrical deployments in presence of SNA. CONCLUSIONS: The "step-by-step" technique is a simple, safe, and effective graft-deployment method, which allows a very precise release in SNA and possibly achieves better results in the long-term period in such difficult anatomies.

Technical Success and Long-Term Results with Excluder/C3 Endoprosthesis in Narrow Aortic Bifurcations: First Italian Multicentre Experience.

BACKGROUND: This study aims at evaluating technical success and long-term results using Gore Excluder/C3 endoprosthesis in patients with narrow aortic bifurcation (NAB; inner aortic diameter < 18 mm). METHODS: Clinical and anatomical data were collected retrospectively from patients treated in 2 high-volume Italian vascular centers between 2005 and 2017. A total of 1325 endovascular aneurysm repair procedures were performed, of which 195 involved Excluder/C3 Gore endoprosthesis. One hundred forty-one patients had a regular aortic bifurcation (RAB; maximum inner diameter ≥ 18 mm), whereas 54 presented with NAB (<18 mm). Technical success and procedural time were considered as primary outcomes. Secondary outcomes were perioperative complications, long-term graft-related complications and reintervention rates. RESULTS: Demographic data and risk factors were similar in the 2 groups. The mean diameter of aortic bifurcation was 29.8 ± 10.4 mm in RAB versus 17.1 ± 0.9 mm in NAB. Technical success was 100% in both groups. Incidence of intraoperative kinking/stenosis of limb graft was significantly higher in NAB (40.7% vs. 12.8%; P < 0.001), which was treated by means of kissing balloon technique (KiBaTe) and selective stenting. Time of procedure was similar. Post-operative complications rate was similar in both the groups (9.5% in RAB versus 4.2% in NAB, P = 0.180). Mean follow-up period was 40.0 months (range, 1-130). No significant difference was registered in long-term graft-related complications between RAB and NAB (38.3% vs. 38.8%; P = 0.939). Reintervention rate after 70 months was 21.8% vs. 24.6% in RAB and NAB, respectively (log rank = 0.517). Primary patency at 6, 12, and 48 months was 99.3% vs. 100%, 99.3% vs. 100%, and 98.5% vs. 97.9%, respectively (log rank = 0.497). Assisted primary patency was 98.6% vs. 96.0%, 97.8% vs. 96.0%, and 97.8% vs. 96.0%, respectively (log rank = 0.789). Secondary patency was 100% in both the groups. CONCLUSIONS: Endovascular aneurysm repair of NAB using Gore Excluder/C3 graft can be considered safe and effective in early and late follow-up. Intraoperative graft kinking is frequent in NAB and KiBaTe is recommended to prevent occlusive complications.

Unsuspected Limitations of 3D Printed Model in Planning of Complex Aortic Aneurysm Endovascular Treatment.

OBJECTIVE: Static 3-dimensional (3D) printing became attractive for operative planning in cases that involve difficult anatomy. An interactive (low cost, fast) 3D print allowing deliberate surgical practice can be used to improve interventional simulation and planning. BACKGROUND: Endovascular treatment of complex aortic aneurysms is technically challenging, especially in case of narrow aortic lumen or significant aortic angulation (hostile anatomy). The risk of complications such as graft kinking and target vessel occlusion is difficult to assess based solely on traditional software measuring methods and remain highly dependent on surgeon skills and expertise. METHODS: A patient with juxtarenal AAA with hostile anatomy had a 3-dimensional printed model constructed preoperatively according to computed tomography images. Endovascular graft implantation in the 3D printed aorta with a standard T-Branch Cook (Cook® Medical, Bloomington, IN, USA) was performed preoperatively in the simulation laboratory enabling optimized feasibility, surgical planning and intraoperative decision making. RESULTS: The 3D printed aortic model proved to be radio-opaque and allowed simulation of branched endovascular aortic repair (BREVAR). The assessment of intervention feasibility, as well as optimal branch position and orientation was found to be useful for surgeon confidence and the actual intervention in the patient. There was a remarkable agreement between the 3D printed model and both CT and X-ray angiographic images. Although the technical success was achieved as planned, a previously deployed renal stent caused unexpected difficulty in advancing the renal stent, which was not observed in the 3D model simulation. CONCLUSION: The 3D printed aortic models can be useful for determining feasibility, optimizing planning and intraoperative decision making in hostile anatomy improving the outcome. Despite already offering satisfying accuracy at present, further advancements could enhance the 3D model capability to replicate minor anatomical deformities and variations in tissue density.