With the exception of the Hill-Sachs interval, CT and MRI show no significant differences in the diagnostic value of the HSL measurement regardless of the measurement technique.

PURPOSE: The aim of the current study was to compare the diagnostic precision and reliability of different methods in measuring Hill-Sachs lesions (HSLs) using MRI and CT. METHODS: A total of 80 consecutive patients with a history of anterior shoulder instability were retrospectively included. The preoperative CT and MRI scans of the affected shoulders were analysed. To investigate the ability of the Franceschi grading, Calandra classification, Richards, Hall, and Rowe grading scale, Flatow percentage and "glenoid track" assessment according to Di Giacomo et al. to quantify the extent of humeral bone loss, the results of each measurement method obtained with MRI were compared with those achieved with CT. In addition, the intra- and inter-rater reliabilities of each measurement method using CT and MRI were calculated and compared. RESULTS: A significant difference was found between CT and MRI in the determination of the Hill-Sachs interval (HSI) (p = 0.016), but not between the results of any of the other measurement techniques. With the exceptions of the Franceschi grade and Calandra classification, all measurement methods showed good or excellent intra- and inter-rater reliabilities for both MRI and CT. CONCLUSIONS: While the determination of the HSI with MRI was more accurate, all other analysed techniques for measuring the amount of humeral bone loss showed similar diagnostic precision. With regard to the intra- and inter-rater reliabilities, all measurement techniques analysed, with the exception of the Franceschi and Calandra classifications, provided good to very good reliabilities with both CT and MRI. LEVEL OF EVIDENCE: III.

The tibial cut in total knee arthroplasty influences the varus alignment, the femoral roll-back and the tibiofemoral rotation in patients with constitutional varus.

PURPOSE: Different alignment types for a better outcome after TKA were described. However, it is not clear how kinematic alignment influences knee joint kinematic. The purpose of this study was to analyze whether adapted tibial cuts in constitutional varus knees affect knee joint kinematics regarding femoral roll-back, varus/valgus angle, and femorotibial rotation. METHODS: Seven cadaveric knees with constitutional varus alignment were examined in the native state and after implantation of a cruciate retaining (CR)-TKA with 0°, 3° and 6° tibia cuts using an established knee joint simulator. The effects of varus alignment on femorotibial rollback and rotation was determined. In addition, the native knee joint and different tibial cuts in CR-TKA were compared with Student's t test. RESULTS: Total knee replacement with a 3° and 6° varus tibia cut had the greatest varus deviation to the native knee (mean 1.6° ± 0.09°, respectively); while, knees with a 0° (mean 0.2° ± 0.01°) tibia cut were most similar to the constitutional varus knee joint. The femoral roll-back in the medial compartment was increased in the native knee (5.7-12.5 mm). A 6° varus cut had a restricted translation in the medial compartment (2-3.2 mm). In the lateral compartment, the extensive translation was observed with a 0° varus cut, followed by 3° and 6° and the native knee. All cuts showed significantly different mean values. Only the cuts at 3° and at 6° in the medial compartment and the cuts at 0° and at 3° in the lateral compartment did not differ significantly. In respect to tibiofemoral rotation, 0° and 3° varus cuts across all loads had the least difference to the native knee (3.4°), with a 0° varus cut showing a higher absolute internal rotation of the tibia than the native knee. Changes in knee kinematics of the tibiofemoral rotation showed significantly different mean values. CONCLUSION: The potentially improved outcome parameters in TKA with adapted tibia cuts in constitutional varus knees cannot be completely explained by the changes to knee kinematics. Mechanical alignment seems to result in more balanced load distribution and kinematics more closely resembling the native knee. From a kinematic point of view, it is not recommended to place the tibia in more than 3° of varus. LEVEL OF EVIDENCE: Biomechanical study.

Degeneration alters the biomechanical properties and structural composition of lateral human menisci.

OBJECTIVE: Because the literature relating to the influence of degeneration on the viscoelasticity and tissue composition of human lateral menisci remains contradictory or completely lacking, the aim of this study was to fill these gaps by comprehensively characterising the biomechanical properties of menisci with regard to the degree of degeneration. DESIGN: Meniscal tissue from 24 patients undergoing a total knee replacement was collected and the degeneration of each region classified according to Pauli et al. For biomechanical characterisation, compression and tensile tests were performed. Additionally, the water content was determined and infrared (IR) spectroscopy was applied to detect changes in the structural composition, particularly of the proteoglycan and collagen content. RESULTS: With an increasing degree of degeneration, a significant decrease of the equilibrium modulus was detected, while simultaneously the water content and the hydraulic permeability significantly increased. However, the tensile modulus displayed a tendency to decrease with increasing degeneration, which might be due to the significantly decreasing amount of collagen content identified by the IR measurements. CONCLUSION: The findings of the current study may contribute to the understanding of meniscus degeneration, showing that degenerative processes appear to mainly worsen viscoelastic properties of the inner circumference by disrupting the collagen integrity.

The tibial cut influences the patellofemoral knee kinematics and pressure distribution in total knee arthroplasty with constitutional varus alignment.

PURPOSE: The current literature suggests that kinematic total knee arthroplasty (kTKA) may be associated with better outcome scores in patients with constitutional varus alignment. The underlying patellofemoral kinematic changes (patella tilting and patella tracking) and patellofemoral pressure distribution have not yet been described. The present study compared the effects of different tibial cuts, as used in kTKA, on patellofemoral knee kinematics and the pressure distribution, in addition to comparisons with the natural constitutional varus knee. METHODS: Seven cadaveric knee joints with constitutional varus alignment were examined in the native state and after 0°, 3°, or 6° tibial cut cruciate-retaining (CR)-TKA using an established knee joint simulator. The effects on patella rotation/patella tilting, patellofemoral pressure, and patellofemoral length ratios (= patella tracking) were determined. In addition, the natural knee joint and different tibial cuts in CR-TKA were compared (Student's t test). RESULTS: In the patellofemoral joint, 6° CR-TKA was associated with the greatest similarity with the natural constitutional varus knee. By contrast, knees subjected to 0° CR-TKA exhibited the largest deviations of patellar kinematics. The smallest difference compared with the natural knee joint concerning patella tilting was found for 6° CR-TKA (mean 0.4°, p < 0.001), and the largest difference was noted for 0° CR-TKA (mean 1.7°, p < 0.001). Concerning patellofemoral pressure, 6° CR-TKA resulted in outcomes most similar to the natural knee joint, featuring a mean difference of 3 MPa. The largest difference from the natural knee joint was identified for 0° CR-TKA, with an average difference of 8.1 MPa (p < 0.001; total mean 17.7 MPa). Meanwhile, 3° and 6° CR-TKA induced medialization of the patella, with the latter inducing the largest medialization value of 4.5 mm at 90° flexion. CONCLUSIONS: The improved outcome parameters in kTKA described in the literature could be attributable to the similar kinematics of the patellofemoral joint relative to the normal state. The current study confirmed the similar kinematics between the native constitutional varus knee joint and knee joints subjected to 3° or 6° CR-TKA (patellofemoral rotation/patella tilting and patella pressure). Conversely, there was pronounced medialization of the patella following 6° CR-TKA. Patella pressure and patella tilting are described in the literature as possible causes of anterior knee pain after TKA, whereas medialization of the patella, which is also influenced by other causes, might play a subordinate role. LEVEL OF EVIDENCE: V, Biomechanical study.

Cartilage survival of the knee strongly depends on malalignment: a survival analysis from the Osteoarthritis Initiative (OAI).

PURPOSE: Progression of osteoarthritis over time is poorly understood. The aim of the current study was to establish a timeline of "cartilage survival rate" per subregion of the knee in relation to mechanical alignment of the lower extremity. The study hypothesized that there are differences in progression of osteoarthritis between varus, valgus and physiologic lower extremity alignment. METHODS: Based on hip-knee-ankle standing radiographs at baseline, 234 knees had physiologic (180° ± 3°, mean 179.7°), 158 knees had varus (< 177°; mean 174.5°) and 66 knees valgus (> 183°; mean 185.2°) alignment (consecutive knees of the OAI "Index Knee" group, n = 458; mean age 61.7; 264 females). The Osteoarthritis Initiative (OAI; a multi-center, longitudinal, prospective observational study of knee osteoarthritis [30] using MRIs) defines progressive OA as a mean decrease of cartilage thickness of 136 µm/year and a mean decrease of cartilage volume by 5% over 1 year (DESS sequences, MRI). A Kaplan-Meier curve was generated for osteoarthritis progression based on OAI criteria. RESULTS: Osteoarthritis progression based on volume decrease of 5% in varus knees occurred after 30.8 months (medial femoral condyle), after 37 months (medial tibia), after 42.9 months (lateral femoral condyle) and 43.4 months (lateral tibia), respectively. In a valgus alignment progression was detectable after 31.5 months (lateral tibia), after 36.2 months (lateral femoral condyle), after 40.4 months (medial femoral condyle) and 43.8 months (medial tibia), respectively. The physiological alignment shows a progression after 37.8 months (medial femoral condyle), after 41.6 months (lateral tibia), after 41.7 months (medial tibia) and after 43 months (lateral femoral condyle), respectively. CONCLUSION: Based on data from the OAI, the rate and location (subregion) of osteoarthritis progression of the knee is strongly associated with lower extremity mechanical alignment. LEVEL OF EVIDENCE: Level I (prognostic study).

Difficult to treat: are there organism-dependent differences and overall risk factors in success rates for two-stage knee revision?

OBJECTIVES: Failure after two-stage procedure for periprosthetic joint infection (PJI) is a rare, but devastating complication. Some authors assume a correlation of underlying organisms and recurrence rate. Methicillin-resistant Staphylococci (MRS) and other organisms (quinolone-resistant Gram-negative bacteria, rifampicin-resistant Staphylococcus, Enterococcus, and Candida) are meant to be "difficult to treat" (DTT) with an inferior outcome for two-stage revision. In addition to the type of bacteria, some more risk factors seem to be present. The aim of this study was (1) to detect a difference of reinfection rates between reinfection-causing groups of bacteria ["difficult to treat" (DTT), "easy to treat" (ETT) and methicillin-resistant staphylococci (MRS)] after a two-stage procedure, and (2) find overall risk factors for reinfection in a standardized long (spacer insertion for at least 6 weeks) two-stage procedure for periprosthetic knee infection. METHODS: One hundred and thirty-seven two-stage revisions for periprosthetic knee infection were performed at one tertiary referral center. Finally, 96 patients could be included for analyses. Possible risk factors (comorbidities, prior surgery, etc.) and the types of organisms were documented. Quinolone-resistant Gram-negative bacteria, rifampicin-resistant Staphylococcus, Enterococcus, and Candida were classified as "difficult to treat" (DTT). Methicillin-resistant Staphylococci were summarized as "MRS", all other organism are summarized as "easy to treat" (ETT). Statistical analyses included univariate analysis (t test, Fisher's exact test, Chi square test) and logistic regression analysis. RESULTS: There were no statistical significant differences in recurrent infection rates between organism groups (DTT vs. ETT, p = 0.674; DTT vs. MRS, p = 0.705; ETT vs. MRS, p = 0.537). Risk factors seem to be "need of revision after first stage" (p = 0.019, OR 5.62) or completed second stage (p = 0.000, OR 29.07), numbers of surgeries (p = 0.028) and alcohol abuse (p = 0.019, OR 5.62). CONCLUSIONS: Revision needed during or after a two-stage exchange, numbers of surgeries and alcohol abuse are risk factors for recurrence, a different recurrence rates between organism-groups cannot be shown. The absence of significant differences in recurrence rates points to the importance of the individuality of each periprosthetic infection case: a reduction of necessary surgeries (with a thorough debridement, appropriate antibiotic addition to spacers) and the control of comorbidities (alcohol abuse) appear to be essential components of a two-stage exchange.

Translation, validation, and cross-cultural adaption of the Western Ontario Meniscal Evaluation Tool (WOMET) into German.

PURPOSE: The Western Ontario Meniscal Evaluation Tool (WOMET) was developed in order to investigate the health-related quality of life of patients with meniscal pathologies. The aim of the present study was to translate and validate the WOMET into German. METHODS: A standardized forward backward translation of the WOMET into German was first performed. One hundred ninety-two patients with isolated meniscal tears completed the German version of the WOMET as well as the Western Ontario McMasters University Arthritis Index, and the Knee Osteoarthritis Outcome Score. Furthermore, reliability, construct validity, feasibility, internal consistency, ceiling, and floor effects were then calculated. RESULTS: Excellent feasibility (85.4% fully complete questionnaire), internal consistency (Cronbach's α = 0.92), and test-retest reliability (ICC, r = 0.90) were found. The standard error of measurement and the minimal detectable change were ±4.6 and 12.7 points, respectively. All predefined hypothesises were confirmed. No floor or ceiling effects were found. CONCLUSIONS: The presented German version of the WOMET is a valid and reliable tool for investigating the health-related quality of life of German-speaking patients with meniscal pathologies. LEVEL OF EVIDENCE: Cross-sectional study, Level II.

[Measurement of acetabular cup inclination in anteroposterior pelvic radiogram : An indicator of quality after primary total hip arthroplasty?] / Die Pfanneninklinationsmessung in der Beckenübersichtsaufnahme : Ein Qualitätsindikator nach Hüft-TEP-Primärimplantation?

BACKGROUND AND OBJECTIVE: Acetabular cup orientation, consisting of pelvic positioning, version and inclination, can influence short-term and long-term results after total hip arthroplasty (THA). The radiographic measurement of acetabular cup inclination represents an indicator of quality for the EndoCert certification in Germany. The purpose of this study was to determine the intrarater and interrater reliability of radiographic measurements of acetabular cup inclination after THA. MATERIAL AND METHODS: In this study four independent investigators with different levels of expertise retrospectively performed measurements on radiograms (anteroposterior pelvic radiogram) from 99 patients. The intraclass correlation coefficient (ICC) and Pearson's correlation coefficient were determined and were considered statistically significant with r > 0.8 and p < 0.05. RESULTS AND CONCLUSION: A high correlation was found for both intrarater and interrater reliability based on determination of Pearson's correlation coefficient and the ICC with r > 0.9 and p < 0.001 for all measurements. Based on these results the radiographic measurement of acetabular cup inclination can be considered as a simple measuring tool with high intrarater and interrater reliability. As cup orientation consists of inclination, version and positioning, the exclusive measurement of cup inclination for radiological quality assessment needs to be discussed critically.

Antioxidative therapy in an ex vivo human cartilage trauma-model: attenuation of trauma-induced cell loss and ECM-destructive enzymes by N-acetyl cysteine.

OBJECTIVE: Mechanical trauma of articular cartilage results in cell loss and cytokine-driven inflammatory response. Subsequent accumulation of reactive oxygen (ROS) and nitrogen (RNS) species enhances the enzymatic degradation of the extracellular matrix (ECM). This study aims on the therapeutic potential of N-acetyl cysteine (NAC) in a human ex vivo cartilage trauma-model, focusing on cell- and chondroprotective features. DESIGN: Human full-thickness cartilage explants were subjected to a defined impact trauma (0.59 J) and treated with NAC. Efficiency of NAC administration was evaluated by following outcome parameters: cell viability, apoptosis rate, anabolic/catabolic gene expression, secretion and activity of matrix metalloproteinases (MMPs) and proteoglycan (PG) release. RESULTS: Continuous NAC administration increased cell viability and reduced the apoptosis rate after trauma. It also suppressed trauma-induced gene expression of ECM-destructive enzymes, such as ADAMTS-4, MMP-1, -2, -3 and -13 in a dosage- and time-depending manner. Subsequent suppression of MMP-2 and MMP-13 secretion reflected these findings on protein level. Moreover, NAC inhibited proteolytic activity of MMPs and reduced PG release. CONCLUSION: In the context of this ex vivo study, we showed not only remarkable cell- and chondroprotective features, but also revealed new encouraging findings concerning the therapeutically effective concentration and treatment-time regimen of NAC. Its defense against chondrocyte apoptosis and catabolic enzyme secretion recommends NAC as a multifunctional add-on reagent for pharmaceutical intervention after cartilage injury. Taken together, our data increase the knowledge on the therapeutic potential of NAC after cartilage trauma and presents a basis for future in vivo studies.

Complications associated with 133 static, antibiotic-laden spacers after TKA.

PURPOSE: Periprosthetic infection after total knee arthroplasty (TKA) is a devastating complication, with a two-stage revision currently the 'gold standard' treatment for chronic infections. There is, however, a lack of information about mechanical complications during this treatment. The purpose of this study was to determine: (1) the rate and type of mechanical complications encountered during a two-stage exchange revision for periprosthetic infection of the knee and (2) possible factors of influence. METHODS: Between 2000 and 2011, 133 patients received an antibiotic-laden cement spacer as part of a two-stage protocol. The overall frequency and types of complication were recorded (fissure/fracture of the tibia or femur, spacer fracture, subluxation of the patella, peroneus affection, wound healing disorder and mobilization under anaesthesia based on a constricted ROM). Also analysed were potential influencing factors (BMI, ASA classification, length of the interval with the enclosed spacer, revision needed after explantation, revision needed after reimplantation, complications after primary TKA, service life of the primary prosthesis) in terms of the overall outcome (possibility of reimplantation, complications during the two-stage protocol). RESULTS: The mean age at the time of the first stage operation was 70.1 ± 9.9 years. Overall, 20 of 133 patients suffered one of the complications mentioned above (15 %). Fracture/fissure of the tibia occurred in nine cases (6.8 %) and fracture/fissure of the femur in three (2.3 %). There were also three mobilizations under anaesthesia after TKA reimplantation, two affections of the peroneus nerve, one spacer fracture, one subluxation of the patella and one wound healing disorder. The influencing factors on the overall outcome were revision after reimplantation (reinfection, p = 0.002), revision after explantation (reinfection, p = 0.044), prior aseptic revision after primary TKA (reimplantation, p = 0.019), and prior two-stage revision (reimplantation, p = 0.002). CONCLUSION: A two-stage revision arthroplasty using a static cement spacer is an effective therapy for infected TKAs. The complication rate of 15 % (including restricted ROM after reimplantation) is acceptable. Influencing factors (revision needed after reimplantation, revision needed after explantation) can be demonstrated and should be avoided during the two-stage protocol.

Can the frontal tibiofemoral alignment be assessed on anteroposterior knee radiographs?

BACKGROUND: The aim of total knee arthroplasty is, amongst others, the reconstruction of a physiological axis of the leg with a tibiofemoral angle in the frontal plane of an average of 6°. The aim of this study is to clarify how much of the bone length on the femur and tibia has to be reproduced on anteroposterior (AP) knee radiographs in order to determine the leg's alignment after a total knee arthroplasty. MATERIALS AND METHODS: We analyzed the postoperative hip-to-ankle (HTA) radiographs of 100 patients who had undergone a total knee arthroplasty at our institution. RESULTS: There were strong correlations between the measured values on HTA and 20 cm bone length [lateral distal femur angle (LDFA) r = 0.887, medial proximal tibial angle (MPTA) r = 0.874, tibiofemoral angle (TFA) r = 0.888], but not between the measurements on HTA and 10 cm (LDFA r = 0.267, MPTA r = 0.102, TFA r = 0.161). There were significant differences between all measurements both on HTA and 20 cm and on HTA and 10 cm, with the exception of the LDFA between HTA and 10 cm (p = 0.085) and of the MPTA between HTA and 20 cm (p = 0.227). The intra- and inter-observer correlations were both high. CONCLUSION: If preoperatively crude axis deviations are excluded, the tibiofemoral angle on AP knee radiographs can be determined with an accuracy of ±2.6° if at least 20 cm length of bone is reproduced (measured from the femoral and tibial joint line). Due to the high 95 % confidence intervals and bearing in mind that deviations greater than 3° may lead to inferior clinical results, however, it appears inappropriate to determine lower limb alignment with anteroposterior radiographs. LEVEL OF EVIDENCE: Level 2.

Can rotational alignment of total knee arthroplasty be measured on MRI?

BACKGROUND AND PURPOSE: The aim of this study was to investigate the potential of MRI to determine rotational alignment after TKA in comparison to the gold standard, CT. METHODS: Rotational alignment was measured in the transverse plane on CT and MR-images in 14 patients prior to TKA revision. Differences between CT and MRI measurements were analysed. RESULTS: There was a strong correlation between CT and MRI measurements for both the tibial (r = 0.929) and femoral (r = 0.942) components with a mean difference of 0.47 ± 1.3 and 0.13 ± 3.2 degrees, respectively. INTERPRETATION: Despite artefact formation, it can be concluded that the rotational alignment of metallic TKA components can be measured by MRI as accurately as by CT.

Evaluation of trochlear dysplasia using MRI: correlation between the classification system of Dejour and objective parameters of trochlear dysplasia.

PURPOSE: Trochlear dysplasia is considered to be one of the major factors causing patellofemoral instability (PFI). Dejour's classification is widely used to assess the severity of trochlear dysplasia. Additionally, in current literature, different quantitative parameters are recommended to distinguish between a normal trochlea and a dysplastic trochlea. In order to achieve a more objective evaluation of the trochlea, the aim of this study was to evaluate whether specific measurements of the femoral trochlea can be assigned to the qualitative classification system of Dejour. METHODS: Transverse MRI T2-weighted scans of 80 knees with symptomatic PFI and varying severity of trochlear dysplasia were classified according to Dejour (type A to D). For all MRI scans, quantitative measurements with parameters as described in the literature were applied. The values were then allocated to Dejour's classification. In addition to the four-grade analysis, two-grade analysis was also performed (Dejour type A against type BCD). Dependent on the cut-off values, specificity, sensitivity and Youden index for each parameter was defined. RESULTS: The allocation resulted in the following distribution: type A trochlear dysplasia n = 25, type B n = 23, type C n = 18 and type D n = 14. In descriptive statistics, none of the measurements proposed in the literature could be assigned to the four-grade classification system of Dejour. For the two-grade analysis at the cut-off, sensitivity ranged from 75 to 86 % and specificity from 76 to 84 % for lateral trochlear inclination, trochlear facet asymmetry and depth of trochlear groove. All other measurements showed a poor sensitivity ranging from 49 to 67 % and specificity from 40 to 72 %. Interobserver and intraobserver repeatability for the measured parameters was fair to moderate (ICC values 0.34-0.58) in high-grade dysplasia (type BCD) and substantial to almost perfect (ICC values 0.71-0.88) in low-grade trochlear dysplasia (type A). CONCLUSION: Quantitative measurements of the femoral trochlea have shown to be of limited value for the assessment of trochlear dysplasia. None of the quantitative measurements of the trochlea on transverse images could be assigned to the four-grade descriptive classification of trochlear dysplasia of Dejour. Additionally, measurements could not be reliably performed in high-grade trochlear dysplasia. However, trochlear inclination, trochlear facet asymmetry and depth of trochlear groove may help to distinguish between low-grade and high-grade dysplasia.

Can the tibial slope be measured on lateral knee radiographs?

PURPOSE: The posterior tibial slope influences both the natural knee stability as well as the stability and kinematics after total knee arthroplasty (TKA). Exact definition of the posterior tibial slope (PTS) requires lateral radiographs of the lower limb. Only lateral knee radiographs are routinely obtained after TKA, however. The purpose of the present study therefore was to analyse the relationship between PTS measurement results on short and expanded lateral knee radiographs. METHODS: The PTS was measured on 100 consecutive lateral radiographs of the lower limb using the mechanical and three diaphyseal axes with various distances below the tibial plateau. RESULTS: Significant differences between PTS results were found for all three diaphyseal axes, with the smallest differences and the strongest correlation for a diaphyseal axis at 16 and 20 cm below the tibial plateau. Using short distances below the tibial plateau (6 and 10 cm) resulted in an overestimation of the PTS of 3°, on average. CONCLUSION: The PTS measurements in long lateral knee radiographs are more accurate compared to short radiographs. On short lateral knee radiographs, only a estimation of the PTS can be carried out. LEVEL OF EVIDENCE: Diagnostic study, Level II.

[Accuracy of hip stem migration measurement on plain radiographs: reliability of bony and prosthetic landmarks]. / Erkennung von Hüftschaftsinterungen am Röntgenbild: Reliabilitätsuntersuchung knöcherner und prothetischer Landmarken.

BACKGROUND: In Germany, more than 150,000 total hip arthroplasties (THA) are performed annually. Early implant migration is supposed to be the best indicator for mechanical failure of femoral stems. Therefore, radiological evaluation of hip stems is routinely done by analyzing plain radiographs of THA. OBJECTIVES: The purpose of this study was to evaluate the accuracy of implant migration measurement on plain radiographs. MATERIAL AND METHODS: Two observers analyzed 44 anterior-posterior radiographs of the pelvis in 22 pain-free patients at least 2 years after implantation of an anatomical hip stem. The evaluation was performed on digital as well as conventional plain radiographs. Intraobserver reliability was analyzed by double measurements of each radiograph and the evaluation of the consecutive series of each patient. The anatomical structures of interest were the greater trochanter and the minor trochanter. Furthermore, the tip of the prosthesis, the shoulder of the implant, and the center of rotation were determined. RESULTS: The conventional measurement technique proved higher accuracy compared to the digital measurement technique. The best anatomical structure was the greater trochanter in the conventional technique and the minor trochanter in the digital technique. The best reference structure with regard to the implant was the shoulder of the prosthesis for both techniques. CONCLUSION: The recommended reference structures for the evaluation of implant migration on plain radiographs are the greater trochanter and the shoulder of the implant for the conventional measurement technique and the minor trochanter and the shoulder of the implant for the digital technique. Migration of an implant should not assumed before a determined difference of 2 mm.

Indications and limitations of osteochondral autologous transplantation in osteochondritis dissecans of the talus.

PURPOSE: Osteochondral autologous transplantation (OAT) from the ipsilateral femoral lateral condyle in osteochondritis dissecans (OD) of the talus has shown good clinical results in the past. To further define, indications and limitations of OAT various factors have been discussed which might influence the clinical outcome. METHODS: In this study, the clinical outcome of OAT of 32 patients (mean follow-up 29 months) was evaluated by means of the American Orthopaedic Foot and Ankle Society (AOFAS) Ankle-Hindfoot Scale, ankle pain on the visual analogue scale (VAS), and Hospital for Special Surgery (HSS) Patella score. We then analysed the statistical correlation between clinical outcome and various variables such as age, pre-existing osteoarthritis, or size of the lesion. RESULTS: Median AOFAS score was 86 (range 68-100), median ankle pain on VAS was 2.0 (range 0-5.5), and median HSS Patella score was 95 (range 35-100). Advanced age (above 40 years of age) was associated with a significantly lower HSS Patella score (80 vs. 97.5, p = 0.035). None of the other variables (obesity, pre-existing osteoarthritis, size of the lesion, necessity of malleolar osteotomy, localization of the lesion, and number of previous surgeries) influenced the clinical outcome adversely. CONCLUSIONS: Osteochondral autologous transplantation in OD of the talus is a safe procedure with good clinical results. As advanced age is associated with higher donor-site morbidity, indication for OAT in older patients should be carefully considered. As none of the other variables affected the clinical outcome of OAT adversely, there is no contraindication for OAT, for example, in osteochondral lesions requiring more than one osteochondral grafts, lateral lesions, patients with BMI >25, pre-existing osteoarthritis, or failed previous surgery. LEVEL OF EVIDENCE: IV.

[Imaging-guided injection techniques of the lumbar spine]. / Bildwandlergestützte Injektionstechniken an der Lendenwirbelsäule.

Spinal injections are an important treatment option in the conservative management of many spinal disorders. A large number of imaging techniques are available to achieve a precise and safe needle placement in interventional procedures. Fluoroscopy-guided injections are safe, cost effective and available in most institutions. The following article presents an overview of common fluoroscopy-guided spinal injection therapy of the lumbar spine.

[Adjacent segment movement after monosegmental total disc replacement and monosegmental fusion of segments L4/5]. / Anschlusssegmentbeweglichkeit nach monosegmentaler Bandscheibenprothesenimplantation und monosegmentaler Fusion Segment L4/5.

BACKGROUND: Preservation of movement at the treated segment and possible reduction of adjacent segment effects is assumed to be an advantage of non-fusion technologies over fusion. The aim of this study was to compare the segmental range of motion (ROM) at the operative level, the cranial and caudal adjacent levels and the global lumbar spine ROM (L2-S1) after monosegmental fusion and total disc replacement (TDR). PATIENTS AND METHODS: Radiographic data was collected from 27 patients with level 1 degenerative disc disease operated at level L4/5. The ROM was assessed at the index level (L4/5), the cranial and caudal adjacent level and for the lumbar spine (L2-S1). RESULTS: In the TDR group no significant changes of lumbar spine ROM (L2-S1) and segmental ROM (index level, cranial and caudal adjacent level) were noticed. In the fusion group there was a significant reduction of lumbar ROM (L2-S1) and index level ROM. Additionally the relative ROM in the adjacent caudal segment significantly increased while no changes were seen in the cranial segment. CONCLUSION: The relative ROM was significantly increased in monosegmental fusion at level L4/5 compared to TDR. To what extent this fact may result in early adjacent segment degeneration in cases of fusion compared to TDR is still unknown.

Alternative technique of cement augmentation of loosened pedicle screws -- technical note and presentation of two cases.

An alternative cement augmentation technique for pedicle screws is described, which was applied in two patients with mono- and bisegmental non-union after preceding multisegmental lumbar fusion. The correctly placed pedicle screws in S1 with diameters of 6 and 8.5 mm had severely enlarged the screw cavities due to segmental instability. Revision screws with 10 mm diameter demonstrated sufficient purchase only on the left side. Therefore, cement augmentation was performed for the right sided screws. After verification of intact pedicle borders, the cavity was filled up with PMMA bone cement. Afterwards, a Kirschner wire was positioned centrally, the hardening of the cement was awaited, the cement was gradually drilled and the screw was placed. In both patients, sufficient purchase of the cemented pedicle screws was documented. Screw insertion after awaiting the hardening of the bone cement in pedicles and vertebral bodies with huge defect situations seems to be an alternative to previous cement augmentation techniques of pedicle screws with the advantage, that the screws could be more easily unscrewed, if necessary.