Intermolecular Interactions in 3-Aminopropyltrimethoxysilane, N-Methyl-3-aminopropyltrimethoxysilane and 3-Aminopropyltriethoxysilane: Insights from Computational Spectroscopy.

In this work, a computational spectroscopy approach was used to provide a complete assignment of the inelastic neutron scattering spectra of three title alkoxysilane derivatives-3-aminopropyltrimethoxysilane (APTS), N-methyl-3-aminopropyltrimethoxysilane (MAPTS), and 3-aminopropyltriethoxysilane (APTES). The simulated spectra obtained from density functional theory (DFT) calculations exhibit a remarkable match with the experimental spectra. The description of the experimental band profiles improves as the number of molecules considered in the theoretical model increases, from monomers to trimers. This highlights the significance of incorporating non-covalent interactions, encompassing classical NH···N, N-H···O, as well as C-H···N and C-H···O hydrogen bond contacts, to achieve a comprehensive understanding of the system. A distinct scenario emerges when considering optical vibrational techniques, infrared and Raman spectroscopy. In these instances, the monomer model provides a reasonable description of the experimental spectra, and no substantial alterations are observed in the simulated spectra when employing dimer and trimer models. This observation underscores the distinctive ability of neutron spectroscopy in combination with DFT calculations in assessing the structure and dynamics of molecular materials.

Structural Dynamics of Chloromethanes through Computational Spectroscopy: Combining INS and DFT.

In this work, the structural dynamics of the chloromethanes CCl4, CHCl3 and CH2Cl2 were evaluated through a computational spectroscopy approach by comparing experimental inelastic neutron scattering (INS) spectra with the corresponding simulated spectra obtained from periodic DFT calculations. The overall excellent agreement between experimental and calculated spectra allows a confident assignment of the vibrational features, including not only the molecular fundamental modes but also lattice and combination modes. In particular, an impressive overtone sequence for CHCl3 is fully described by the simulated INS spectrum. In the CCl4 spectrum, the splitting of the ν3 mode at ca. 765-790 cm-1 is discussed on the basis of the Fermi resonance vs. crystal splitting controversy.

Understanding the Structure and Dynamics of Nanocellulose-Based Composites with Neutral and ionic Poly(methacrylate) Derivatives using Inelastic Neutron Scattering and DFT Calculations.

Bacterial nanocellulose (BC)-based composites containing poly(2-hydroxyethyl methacrylate) (PHEMA), poly(methacroylcholine chloride) (PMACC) or poly(methacroylcholine hydroxide) (PMACH) were characterized by inelastic neutron scattering (INS) spectroscopy, combined with DFT (density functional theory) calculations of model systems. A reasonable match between calculated and experimental spectral lines and their intensities was used to support the vibrational assignment of the observed bands and to validate the possible structures. The differences between the spectra of the nanocomposites and the pure precursors indicate that interactions between the components are stronger for the ionic poly(methacrylate) derivatives than for the neutral counterpart. Displaced anions interact differently with cellulose chains, due to the different ability to compete with the O-H···O hydrogen bonds in cellulose. Hence, the INS is an adequate technique to delve deeper into the structure and dynamics of nanocellulose-based composites, confirming that they are true nanocomposite materials instead of simple mixtures of totally independent domains.

What a difference a methyl group makes - probing choline-urea molecular interactions through urea structure modification.

There is a lack of fundamental knowledge on deep eutectic solvents, even for the most extensively studied mixtures, such as the mixture of cholinium chloride and urea, which prevents a judicious choice of components to prepare new solvents. The objective of this work is to study and understand the fundamental interactions between cholinium chloride and urea that lead to the experimentally observed melting temperature depression. To do so, the structure of urea was strategically and progressively modified, in order to block certain interaction centres, and the solid-liquid equilibrium data of each new binary system was experimentally measured. Using this approach, it was concluded that the most important interaction between cholinium chloride and urea occurs through hydrogen bonding between the chloride anion and the amine groups. Any blockage of these groups severely hampers the melting point depression effect. Raman spectroscopy and DFT calculations were utilized to study in more detail this hydrogen bonding and its nuances.

Vibrational Dynamics in crystalline 4-(dimethylamino) benzaldehyde: Inelastic Neutron Scattering and Periodic DFT Study.

The structure and dynamics of crystalline 4-(dimethylamino) benzaldehyde, 4DMAB, are assessed through INS spectroscopy combined with periodic DFT calculations. The excellent agreement between experimental and calculated spectra is the basis for a reliable assignment of INS bands. The external phonon modes of crystalline 4DMAB are quite well described by the simulated spectrum, as well as the modes involving low-frequency molecular vibrations. Crystal field splitting is predicted and observed for the modes assigned to the dimethylamino group. Concerning the torsional motion of methyl groups, four individual bands are identified and assigned to specific methyl groups in the asymmetric unit. The torsional frequencies of the four methyl groups in the asymmetric unit fall in a region of ca. 190 ± 20 cm-1, close to the range of values observed for methyl groups bonding to unsaturated carbon atoms. The hybridization state of the X atom in X-CH3 seems to play a key role in determining the methyl torsional frequency.

1,3,5-Tris(bromomethyl)benzene.

The asymmetric unit of the title compound, C(9)H(9)Br(3), is composed of a single molecule. Two bromo substituents are located on one side of the plane of the aromatic ring and the third is on the opposite side, with the molecular unit exhibiting an approximate noncrystallographic C(s) point group. The crystal structure is rich in Br...Br, CH(2)···Br and CH···π weak intermolecular contacts which mediate the crystal packing of individual molecules. These interactions promote a red-shift of a handful of vibrational modes (associated with the pendant -CH(2)Br groups) compared with values from theoretical density functional theory (DFT) calculations.

New Insights on the Vibrational Dynamics of 2-Methoxy-, 4-Methoxy- and 4-Ethoxy-Benzaldehyde from INS Spectra and Periodic DFT Calculations.

The dynamics of 2-methoxybenzaldehyde, 4-methoxybenzaldehyde, and 4-ethoxybenzaldehyde in the solid state are assessed through INS spectroscopy combined with periodic DFT calculations. In the absence of experimental data for 4-ethoxybenzaldehyde, a tentative crystal structure, based on its similarity with 4-methoxybenzaldehyde, is considered and evaluated. The excellent agreement between calculated and experimental spectra allows a confident assignment of the vibrational modes. Several spectral features in the INS spectra are unambiguously assigned and torsional potential barriers for the methyl groups are derived from experimental frequencies. The intramolecular nature of the potential energy barrier for methyl rotation about O-CH3 bonds compares with the one reported for torsion about saturated C-CH3 bonds. On the other hand, the intermolecular contribution to the potential energy barrier may represent 1/3 of the barrier height in these systems.

Hydrogen-bond dynamics of C-H...O interactions: the chloroform...acetone case.

Spectroscopic evidence for C-H...O hydrogen bonding in chloroform...acetone [Cl(3)CH...O=C(CH(3))(2)] mixtures was obtained from vibrational inelastic neutron scattering (INS) spectra. Comparison between the INS spectra of pure samples and their binary mixtures reveals the presence of new bands at about 82, 130 and 170 cm(-1). Assignment of the 82 cm(-1) band to the nuO...H anti-translational mode is considered and discussed. In addition, the betaC-H mode of CHCl(3) at 1242 cm(-1) is split in the spectra of the mixtures, and the high-wavenumber component is assigned to the hydrogen-bonded complex. The plot of the integrated intensity of this component shows a maximum for x=0.5, in agreement with the 1:1 stoichiometry of the chloroformacetone complex, with a calculated complexation constant of 0.15 dm(3) mol(-1). Results also show that the complex behaves as an independent entity, that is, despite being weak, such interactions play a key role in supramolecular chemistry.

Bis(µ-4-phenyl-pyridine N-oxide-κO:O)bis-[bis-(1,1,1,5,5,5-hexa-fluoro-pentane-2,4-dionato)copper(II)].

The asymmetric unit of the title compound, [Cu(2)(C(5)HF(6)O(2))(4)(C(11)H(9)NO)(2)], contains one half of the centrosymmetric dinuclear complex. The coordination geometry of the Cu(II) atom is octa-hedral, exhibiting a typical Jahn-Teller distortion. One trifluoro-methyl group is rotationally disordered between two orientations in a 1:1 ratio.

Tripyridinium cis-tetra-chlorido-dioxido-molybdate(VI) chloride.

In the title compound, (C(5)H(6)N)(3)[MoCl(4)O(2)]Cl, the pyridinium cations are N-H⋯Cl hydrogen bonded to the anionic [MoCl(4)O(2)](2-) complexes and to the two crystallographically independent chloride anions (located on C2 axes). The Mo(6+) centre adopts a highly distorted octa-hedral geometry, being surrounded by four chloride and two terminal oxide groups. The oxide ligands are mutually cis.

Tetra-pyridinium µ-oxido-di-µ-sulfato-bis-[chloridodioxidomolybdate(VI)].

The title salt, (C(5)H(6)N)(4)[Mo(2)Cl(2)O(5)(SO(4))(2)], comprises four pyridinium cations for each [(MoClO(2))(2)(µ-O)(µ-SO(4))(2)](4-) anionic unit. The asymmetric unit consists of three aggregates of the empirical formula. The tetra-anionic bimetallic molybdenum(VI) cluster is unprecedented and contains two sulfate and one oxide bridges. This structure constitutes the first example of a non-polymeric compound with terminal oxide, sulfate and halide ligands bonded to the same metal. The hydrogen bonds connecting the pyridinium cations to the molybdenum clusters are diverse, varying from strong and directional interactions to bifurcated bonds with a subsequent loss of directionality.

(R)-(1-Ammonio-eth-yl)phospho-nate.

The title compound, C(2)H(8)NO(3)P, crystallizes in its zwitterionic form H(3)N(+)CH(CH(3))PO(O(-))(OH). In the crystal, the molecules are linked by N-H⋯O and O-H⋯O hydrogen bonds.

Identification of microplastics using Raman spectroscopy: Latest developments and future prospects.

Widespread microplastic pollution is raising growing concerns as to its detrimental effects upon living organisms. A realistic risk assessment must stand on representative data on the abundance, size distribution and chemical composition of microplastics. Raman microscopy is an indispensable tool for the analysis of very small microplastics (<20 µm). Still, its use is far from widespread, in part due to drawbacks such as long measurement time and proneness to spectral distortion induced by fluorescence. This review discusses each drawback followed by a showcase of interesting and easily available solutions that contribute to faster and better identification of microplastics using Raman spectroscopy. Among discussed topics are: enhanced signal quality with better detectors and spectrum processing; automated particle selection for faster Raman mapping; comprehensive reference libraries for successful spectral matching. A last section introduces non-conventional Raman techniques (non-linear Raman, hyperspectral imaging, standoff Raman) which permit more advanced applications such as real-time Raman detection and imaging of microplastics.

Understanding the vibrational spectra of crystalline isoniazid: Raman, IR and INS spectroscopy and solid-state DFT study.

This work presents a comprehensive spectroscopic analysis of crystalline isoniazid, one of the main drugs in tuberculosis chemotherapy, using a blend of spectroscopic and computational methods. Mid- and far-infrared, Raman, and inelastic neutron scattering spectroscopies, with contribution of isotopic substitution are combined with discrete and periodic DFT quantum chemical calculations. This combined approach successfully reproduces the whole spectral range, allowing a sound assignment of all the vibrational bands. Previous misassignments have been corrected and several spectral features of isoniazid crystal are reported for the first time. Virtues and limitations of the computational approach (periodic and discrete) are also discussed in light of the present state-of-the-art in the field.

Probing pseudopolymorphic transitions in pharmaceutical solids using Raman spectroscopy: hydration and dehydration of theophylline.

Theophylline is known to undergo vapor phase induced hydrate-anhydrate pseudopolymorphic transformations, which can affect its bioavailability. In this work, the kinetics of the pseudopolymorphic transitions of theophylline crystals in different storage conditions is studied using a vibrational spectroscopic technique. While the hydration is a single-step process with a half-life time of ca. 5 h, the dehydration occurs through a two-step mechanism. In addition, the phase stability of hydrate-anhydrate systems in different relative humidity (RH) conditions was probed. The critical RH for anhydrous teophylline was found to be at ca. 79%, while the critical RH for dehydration is ca. 30%.

Conformational and vibrational reassessment of solid paracetamol.

This work provides an answer to the urge for a more detailed and accurate knowledge of the vibrational spectrum of the widely used analgesic/antipyretic drug commonly known as paracetamol. A comprehensive spectroscopic analysis - including infrared, Raman, and inelastic neutron scattering (INS) - is combined with a computational approach which takes account for the effects of intermolecular interactions in the solid state. This allows a full reassessment of the vibrational assignments for Paracetamol, thus preventing the propagation of incorrect data analysis and misassignments already found in the literature. In particular, the vibrational modes involving the hydrogen-bonded NH and OH groups are correctly reallocated to bands shifted by up to 300cm-1 relatively to previous assignments.

Use of FTIR, FT-Raman and 13C-NMR spectroscopy for identification of some seaweed phycocolloids.

Many seaweeds produce phycocolloids, stored in the cell wall. Members of the Rhodophyceae produce polysaccharides the main components of which are galactose (galactans)-agar and carrageenan. In addition, alginic acid is extracted from members of the Phaeophyceae. This is a binary polyuronide made up of mannuronic acid and guluronic acid. The wide uses of these phycocolloids are based on their gelling, viscosifying and emulsifying properties, which generate an increasing commercial and scientific interest. In this work, the FTIR and FT-RAMAN spectra of carrageenan and agar, obtained by alkaline extraction from different seaweeds (e.g. Mastocarpus stellatus, Chondrus crispus, Calliblepharis jubata, Chondracanthus acicularis, Chondracanthus teedei and Gracilaria gracilis), were recorded in order to identify the type of phycocolloid produced. The spectra of commercial carrageenan, alginic acid and agar samples (SIGMA and TAAB laboratories) were used as references. Special emphasis was given to the 500-1500 cm(-1) region, which presents several vibrational modes, sensitive to the type of polysaccharide and to the type of glycosidic linkage. The FT-Raman spectra present a higher resolution than FTIR spectra, this allowing the identification of a larger number of characteristic bands. In some cases, phycocolloids can be identified by FT-Raman spectroscopy alone.

Coordination properties of 2-aminocyclopentene-1-dithiocarboxylic acid to transition metal ions as studied by ab initio calculations.

The question of the(N, S) vs. (S, S) coordination mode on M x (ACDA)(2) complexes (ACDA=2-aminocyclopentene-1-dithiocarboxylic acid, M=Ni(2+), Pd(2+), Pt(2+)) was assessed through an extensive ab initio study, using the hybrid B3LYP density functional approach. The (S,S)coordination was found to be the most stable one, with an energy difference of ca. 50 kJ mol(-1) relative to the(N, S) coordination mode. Detailed analysis of the ab initio results indicates that this preference is a result of the combined effect of geometry constraints and electron distribution within the complex.

Vibrational study on the local structure of post-synthesis and hybrid mesoporous materials: are there fundamental distinctions?

Organic-inorganic mesoporous materials of the MCM-41 type are important materials that can be prepared by either post-synthesis or one-pot synthesis procedures. A complete control of the characteristics at a local level is of the utmost importance in view of the applications of such materials. However, there are not many studies relating such features with synthetic approaches. In this work, we prepared samples by post-synthesis derivatization of materials from Si-based MCM-41, with bidentate nitrogen ligands bearing one or two silylated arms, and by one-pot synthesis of organic-inorganic hybrid materials. The bulk properties of the two kinds of materials were comparable. Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy and Raman spectroscopy were used to investigate the local environment, namely, the number of OH groups and distribution of SiO(4) units (large and small ring units). Hydrophilicity correlates with both the type of organic moiety used (mono- or disilylated), as well as with the synthetic procedure. The same vibrational studies showed how the structure in the channels changes as a function of pressure, reflecting the low mechanical stability of the mesoporous materials.