RESUMEN
The present article illustrates the green synthesis of novel carbon quantum dots (CQDs) from biomass viz. Tagetes erecta (TE), and subsequently fabrication of a metal ion probe for the sensing of Fe3+ in real samples. TE-derived CQDs (TE-CQDs) have been synthesized by a facile, eco-friendly, bottom-up hydrothermal approach using TE as a carbon source. The successful synthesis and proper phase formation of the envisaged material has been confirmed by various characterization techniques (Raman, XRD, XPS, TEM, and EDS). Notably, the green synthesized TE-CQDs show biocompatibility, good solubility in aqueous media, and non-toxicity. The as-synthesized TE-CQDs show an intense photoluminescence peak at 425 nm and exhibit excitation dependent photoluminescence behavior. The proposed TE-CQD-based probe offers a remarkable fluorescence (FL) quenching for Fe3+ with high selectivity (K q â¼ 10.022 × 1013 M-1 s-1) and a sensitive/rapid response in a linear concentration range 0-90 µM (regression coefficient R 2 â¼ 0.99) for the detection of Fe3+. The limit of detection (LOD) of the probe for Fe3+ has been found as 0.37 µM in the standard solution. It has further been applied for the detection of Fe3+ in real samples (human blood serum) and displays good performance with LOD â¼ 0.36 µM. The proposed TE-CQD-based ion sensing probe has potential prospects to be used effectively in biological studies and clinical diagnosis.
RESUMEN
Herein, we demonstrate the fabrication of highly capacitive activated carbon (AC) using a bio-waste Kusha grass (Desmostachya bipinnata), by employing a chemical process followed by activation through KOH. The as-synthesized few-layered activated carbon has been confirmed through X-ray powder diffraction, transmission electron microscopy, and Raman spectroscopy techniques. The chemical environment of the as-prepared sample has been accessed through FTIR and UV-visible spectroscopy. The surface area and porosity of the as-synthesized material have been accessed through the Brunauer-Emmett-Teller method. All the electrochemical measurements have been performed through cyclic voltammetry and galvanometric charging/discharging (GCD) method, but primarily, we focus on GCD due to the accuracy of the technique. Moreover, the as-synthesized AC material shows a maximum specific capacitance as 218 F g-1 in the potential window ranging from - 0.35 to + 0.45 V. Also, the AC exhibits an excellent energy density of ~ 19.3 Wh kg-1 and power density of ~ 277.92 W kg-1, respectively, in the same operating potential window. It has also shown very good capacitance retention capability even after 5000th cycles. The fabricated supercapacitor shows a good energy density and power density, respectively, and good retention in capacitance at remarkably higher charging/discharging rates with excellent cycling stability. Henceforth, bio-waste Kusha grass-derived activated carbon (DP-AC) shows good promise and can be applied in supercapacitor applications due to its outstanding electrochemical properties. Herein, we envision that our results illustrate a simple and innovative approach to synthesize a bio-waste Kusha grass-derived activated carbon (DP-AC) as an emerging supercapacitor electrode material and widen its practical application in electrochemical energy storage fields.
RESUMEN
Herein, we report a voltammetric method for the nanomolar detection of cefixime, a third-generation antibiotic. The determination of cefixime is validated on a glassy carbon electrode (GCE) as well as on a screen-printed carbon electrode (SPCE). In the present study, we have reported a facile "one step simple hydrothermal synthesis" of MoS2 quantum dots and with the oxidation of aurochloric acid for the further formation of an MoS2 QD-AuNP composite. The as-synthesized nanocomposite was characterized via UV-Vis spectroscopy, FTIR spectroscopy, XRD, TEM and EDX techniques, and further applied in the modification of working electrodes, showing excellent electroactivity. The sensing of cefixime was done via cyclic and differential pulse voltammetry techniques. The presence of the only anodic peak in the voltammogram reveals the irreversible oxidation of cefixime in the potential range of about 1.3 ± 0.1 V vs. Ag/AgCl. The study was also performed at different scan rates, which indicate a diffusion-controlled mechanism. The proposed cefixime sensor showed a linear response in the concentration range of 0.33-90.82 µM (at S/N = 3) with a limit of detection (LOD) of 3.9-4.5 nm. The electrochemical sensitivity is calculated as 8.63 µA µM-1 cm-2 and 7.07 µA µM-1 cm-2 in buffer and pharmaceutical formulation (commercially available cefixime tablet), respectively. The effects of several interferents were also investigated. The proposed sensor is effectively used for estimating cefixime in phosphate buffer and the commercially available cefixime tablets with no cross-reactivity or matrix effects and shows a promising prospect for real applications.