Role of the Support in Gold-Containing Nanoparticles as Heterogeneous Catalysts.

In this review, we discuss selected examples from recent literature on the role of the support on directing the nanostructures of Au-based monometallic and bimetallic nanoparticles. The role of support is then discussed in relation to the catalytic properties of Au-based monometallic and bimetallic nanoparticles using different gas phase and liquid phase reactions. The reactions discussed include CO oxidation, aerobic oxidation of monohydric and polyhydric alcohols, selective hydrogenation of alkynes, hydrogenation of nitroaromatics, CO2 hydrogenation, C-C coupling, and methane oxidation. Only studies where the role of support has been explicitly studied in detail have been selected for discussion. However, the role of support is also examined using examples of reactions involving unsupported metal nanoparticles (i.e., colloidal nanoparticles). It is clear that the support functionality can play a crucial role in tuning the catalytic activity that is observed and that advanced theory and characterization add greatly to our understanding of these fascinating catalysts.

The role of surface oxidation and Fe-Ni synergy in Fe-Ni-S catalysts for CO2 hydrogenation.

Increasing carbon dioxide (CO2) emissions, resulting in climate change, have driven the motivation to achieve the effective and sustainable conversion of CO2 into useful chemicals and fuels. Taking inspiration from biological processes, synthetic iron-nickel-sulfides have been proposed as suitable catalysts for the hydrogenation of CO2. In order to experimentally validate this hypothesis, here we report violarite (Fe,Ni)3S4 as a cheap and economically viable catalyst for the hydrogenation of CO2 into formate under mild, alkaline conditions at 125 °C and 20 bar (CO2 : H2 = 1 : 1). Calcination of violarite at 200 °C resulted in excellent catalytic activity, far superior to that of Fe-only and Ni-only sulfides. We further report first principles simulations of the CO2 conversion on the partially oxidised (001) and (111) surfaces of stoichiometric violarite (FeNi2S4) and polydymite (Ni3S4) to rationalise the experimentally observed trends. We have obtained the thermodynamic and kinetic profiles for the reaction of carbon dioxide (CO2) and water (H2O) on the catalyst surfaces via substitution and dissociation mechanisms. We report that the partially oxidised (111) surface of FeNi2S4 is the best catalyst in the series and that the dissociation mechanism is the most favourable. Our study reveals that the partial oxidation of the FeNi2S4 surface, as well as the synergy of the Fe and Ni ions, are important in the catalytic activity of the material for the effective hydrogenation of CO2 to formate.

Effect of support acidity during selective hydrogenolysis of glycerol over supported palladium-ruthenium catalysts.

We report the role of the acidity of support during the selectivity hydrogenolysis of glycerol over supported bimetallic palladium-ruthenium (PdRu) catalysts. The PdRu nanoparticles were supported on a series of metal oxides and zeolitic supports via the modified impregnation method and tested for the liquid-phase hydrogenolysis of glycerol using gaseous hydrogen. The relative acid site densities of selected catalysts were determined by ammonia temperature-programmed desorption and pyridine desorption experiments. Based on these studies, we report a direct correlation between the catalytic activity (conversion and 1,2 propane diol yield) and two different acid sites (strong acid sites and very strong acid sites). Besides zeolite-supported catalysts, TiO2 supported PdRu nanoparticles exhibit moderate catalytic activity; however, this catalyst shows high selectivity for the desired C-O bond cleavage to produce C3 products over the undesired C-C bond cleavage to produce < C3 products. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

Oxidation of Polynuclear Aromatic Hydrocarbons using Ruthenium-Ion-Catalyzed Oxidation: The Role of Aromatic Ring Number in Reaction Kinetics and Product Distribution.

Oxidation of aromatic hydrocarbons with differing numbers of fused aromatic rings (2-5), have been studied in two solvent environments (monophasic and biphasic) using ruthenium-ion-catalyzed oxidation (RICO). RICO reduces the aromaticity of the polyaromatic core of the molecule in a controlled manner by selective oxidative ring opening. Moreover, the nature of the solvent system determines the product type and distribution, for molecules with more than two aromatic rings. Competitive oxidation between substrates with different numbers of aromatic rings has been studied in detail. It was found that the rate of polyaromatic hydrocarbon oxidation increases with the number of fused aromatic rings. A similar trend was also identified for alkylated aromatic hydrocarbons. The proof-of-concept investigation provides new insight into selective oxidation chemistry for upgrading of polyaromatic molecules.

Mechanistic Insights into Selective Oxidation of Polyaromatic Compounds using RICO Chemistry.

Ruthenium-ion-catalyzed oxidation (RICO) of polyaromatic hydrocarbons (PAHs) has been studied in detail using experimental and computational approaches to explore the reaction mechanism. DFT calculations show that regioselectivity in these reactions can be understood in terms of the preservation of aromaticity in the initial formation of a [3+2] metallocycle intermediate at the most-isolated double bond. We identify two competing pathways: C-C bond cleavage leading to a dialdehyde and C-H activation followed by H migration to the RuOx complex to give diketones. Experimentally, the oxidation of pyrene and phenanthrene has been carried out in monophasic and biphasic solvent systems. Our results show that diketones are the major product for both phenanthrene and pyrene substrates. These diketone products are shown to be stable under our reaction conditions so that higher oxidation products (acids and their derivatives) are assigned to the competing pathway through the dialdehyde. Experiments using 18 O-labelled water do show incorporation of oxygen from the solvents into products, but this may take place during the formation of the reactive RuO4 species rather than directly during PAH oxidation. When the oxidation of pyrene is carried out using D2 O, a kinetic isotope effect (KIE) is observed implying that water is involved in the rate-determining step leading to the diketone products.

Selective oxidation of alkyl-substituted polyaromatics using ruthenium-ion-catalyzed oxidation.

Ruthenium-ion-catalyzed oxidation of a range of alkylated polyaromatics has been studied. 2-Ethylnaphthalene was used as a model substrate, and oxidation can be performed in either a conventional biphasic or in a monophasic solvent system. In either case the reaction rates and product selectivity are identical. The reaction products indicate that the aromatic ring system is oxidized in preference to the alkyl chain. This analysis is possible due to the development of a quantitative NMR protocol to determine the relative amounts of aliphatic and aromatic protons. From a systematic set of substrates we show that as the length of the alkyl chain substituent on a polyaromatic increases, the proportion of products in which the chain remains attached to the aromatic system increases. Larger polyaromatic systems, based on pyrene and phenanthrene, show greater reactivity than those with fewer aromatic rings, and the alkyl chains are more stable to oxidation.

Chem4Energy: a consortium of the Royal Society Africa Capacity-Building Initiative.

The Africa Capacity-Building Initiative is a Royal Society programme funded by the former UK Department for International Development to develop collaborative research between scientists in sub-Saharan Africa and the UK. Initially, four institutions were involved in the Chem4Energy consortium: Cardiff University in the UK and three African partners, the Kwame Nkrumah University of Science and Technology, Ghana, the University of Namibia and the University of Botswana, soon also including the Botswana International University of Science and Technology. The Chem4Energy research programme focused on 'New materials for a sustainable energy future: linking computation with experiment', aiming to deploy the synergy between state-of-the-art computational and experimental techniques to design and optimize new catalysts and semiconductor materials for renewable energy applications, based on materials that are abundant and readily available in African countries. The Chem4Energy consortium has achieved ambitious research goals, graduated seven PhD students and delivered a high-quality cross-disciplinary training programme in materials science and simulation techniques relevant to renewable energy applications. Since 2021, the extended consortium, including North-West University and the Centre for High-Performance Computing in South Africa, has remained active through an annual Chem4Energy conference series, with the sixth meeting taking place in Namibia in April 2025.

In situ spectroscopic investigation of oxidative dehydrogenation and disproportionation of benzyl alcohol.

In the solvent free oxidation of benzyl alcohol, using supported gold-palladium nanoalloys, toluene is often one of major by-products and it is formed by the disproportionation of benzyl alcohol. Gold-palladium catalysts on acidic supports promote both the disproportionation of benzyl alcohol and oxidative dehydrogenation to form benzaldehyde. Basic supports completely switch off disproportionation and the gold-palladium nanoparticles catalyse the oxidative dehydrogenation reaction exclusively. In an attempt to provide further details on the course of these reactions, we have utilized in situ ATR-IR, in situ DRIFT and inelastic neutron scattering spectroscopic methods, and in this article we present the results of these in situ spectroscopic studies.

Designing bimetallic catalysts for a green and sustainable future.

This Critical Review provides an overview of the recent developments in the synthesis and characterization of bimetallic nanoparticles. Initially the review follows a materials science perspective on preparing bimetallic nanoparticles with designer morphologies, after which the emphasis shifts towards recent developments in using these bimetallic particles for catalysing either oxidation or reduction. In the final part of this review we present an overview of the utilization of bimetallic catalyst systems for the transformation of bio-renewable substrates and reactions related to the realization of a bio-refinery. Because of the sheer number of examples of transformations in this area, a few key examples, namely selective oxidation, hydrogenation/hydrogenolysis and reforming of biomass derived molecules, have been chosen for this review. Reports of bimetallic catalysts being used for the aforementioned transformations are critically analysed and the potential for exploiting such bimetallic catalysts have also been highlighted. A specific objective of this review article is to motivate researchers to synthesize some of the "designer" bimetallic catalysts with specific nanostructures, inspired from recent advances in the area of materials chemistry, and to utilize them for the transformation of biomass derived materials that are very complex and pose different challenges compared to those of simple organic molecules. We consider that supported bimetallic nanoparticles have an important role to play as catalysts in our quest for a more green and sustainable society.

Ruthenium ion catalysed C-C bond activation in lignin model compounds - towards lignin depolymerisation.

Lignin is the most abundant renewable feedstock to produce aromatic chemicals, however its depolymerisation involves the breaking of several C-O and C-C inter-unit linkages that connect smaller aromatic units that are present in lignin. Several strategies have been reported for the cleavage of the C-O inter-unit linkages in lignin. However, till today, only a few methodologies have been reported for the effective breaking or the conversion of the recalcitrant C-C inter unit linkages in lignin. Here we report the ruthenium ion catalysed oxidative methodology as an effective system to activate or convert the most recalcitrant inter unit linkages such as ß-5 and 5-5' present in lignin. Initially, we used biphenyl as a model compound to study the effectiveness of the RICO methodology to activate the 5-5' C-C linkage. After 4 h reaction at 22 °C, we achieved a 30% conversion with 75% selectivity towards benzoic acid and phenyl glyoxal as the minor product. To the best of our knowledge this is the first ever oxidative activation of the C-C bond that connects the two phenyl rings in biphenyl. DFT calculation revealed that the RuO4 forms a [3 + 2] adduct with one of the aromatic C-C bonds resulting in the opening of the phenyl ring. Biphenyl conversion could be increased by increasing the amount of oxidant; however, this is accompanied by a reduction in the carbon balance because of the formation of CO2 and other unknown products. We extended this RICO methodology for the oxidative depolymerisation of lignin model hexamer containing ß-5, 5-5' and ß-O-4 linkages. Qualitative and quantitative analyses of the reaction mixture were done using 1H, 13C NMR spectroscopy methods along with GC-MS and Gel Permeation Chromatographic (GPC) methods. Advanced 2D NMR spectroscopic methods such as HSQC, HMBC and 31P NMR spectroscopy after phosphitylation of the mixture were employed to quantitatively analyse the conversion of the ß-5, 5-5' and ß-O-4 linkages and to identify the products. After 30 min, >90% of the 5-5' and linkages and >80% of the ß-5' are converted with this methodology. This is the first report on the conversion of the 5-5' linkage in lignin model hexamer.

Sustainable Synthesis of Dimethyl- and Diethyl Carbonate from CO2 in Batch and Continuous Flow-Lessons from Thermodynamics and the Importance of Catalyst Stability.

Equilibrium conversions for the direct condensation of MeOH and EtOH with CO2 to give dimethyl- and diethyl carbonate, respectively, have been calculated over a range of experimentally relevant conditions. The validity of these calculations has been verified in both batch and continuous flow experiments over a heterogeneous CeO2 catalyst. Operating under optimized conditions of 140 °C and 200 bar CO2, record productivities of 235 mmol/L·h DMC and 241 mmol/L·h DEC have been achieved using neat alcohol dissolved in a continuous flow of supercritical CO2. Using our thermodynamic model, we show that to achieve maximum product yield, both dialkyl carbonates and water should be continuously removed from the reactor instead of the conventionally used strategy of removing water alone, which is much less efficient. Catalyst stability rather than activity emerges as the prime limiting factor and should thus become the focus of future catalyst development.

Controlling the duality of the mechanism in liquid-phase oxidation of benzyl alcohol catalysed by supported Au-Pd nanoparticles.

In the solvent-free oxidation of benzyl alcohol to benzaldehyde using supported gold-palladium nanoparticles as catalysts, two pathways have been identified as the sources of the principal product, benzaldehyde. One is the direct catalytic oxidation of benzyl alcohol to benzaldehyde by O(2), whereas the second is the disproportionation of two molecules of benzyl alcohol to give equal amounts of benzaldehyde and toluene. Herein we report that by changing the metal oxide used to support the metal-nanoparticles catalyst from titania or niobium oxide to magnesium oxide or zinc oxide, it is possible to switch off the disproportionation reaction and thereby completely stop the toluene formation. It has been observed that the presence of O(2) increases the turnover number of this disproportionation reaction as compared to reactions in a helium atmosphere, implying that there are two catalytic pathways leading to toluene.

The Role of Growth Directors in Controlling the Morphology of Hematite Nanorods.

The control of the growth of hematite nanoparticles from iron chloride solutions under hydrothermal conditions in the presence of two different structure promoters has been studied using a range of both structural and spectroscopic techniques including the first report of photo induced force microscopy (PiFM) to map the topographic distribution of the structure-directing agents on the developing nanoparticles. We show that the shape of the nanoparticles can be controlled using the concentration of phosphate ions up to a limit determined to be ~6 × 10-3 mol. Akaganéite (ß-FeOOH) is a major component of the nanoparticles formed in the absence of structure directors but only present in the very early stages (< 8 h) of particle growth when phosphate is present. The PiFM data suggest a correlation between the areas in which phosphate ions are adsorbed and areas where akaganéite persists on the surface. In contrast, goethite (α-FeOOH) is a directly observed precursor of the hematite nanorods when 1,2-diamino propane is present. The PiFM data shows goethite in the center of the developing particles consistent with a mechanism in which the iron hydroxide re-dissolves and precipitates at the nanorod ends as hematite.

Synthesis of highly uniform and composition-controlled gold-palladium supported nanoparticles in continuous flow.

The synthesis of supported bimetallic nanoparticles with well-defined size and compositional parameters has long been a challenge. Although batch colloidal methods are commonly used to pre-form metal nanoparticles with the desired size-range in solution, inhomogeneous mixing of the reactant solutions often leads to variations in size, structure and composition from batch-to-batch and even particle-to-particle. Here we describe a millifluidic approach for the production of oxide supported monometallic Au and bimetallic AuPd nanoparticles in a continuous fashion. This optimised method enables the production of nanoparticles with smaller mean sizes, tighter particle size distributions and a more uniform particle-to-particle chemical composition as compared to the conventional batch procedure. In addition, we describe a facile procedure to prepare bimetallic Au@Pd core-shell nanoparticles in continuous flow starting from solutions of the metal precursors. Moreover, the relative ease of scalability of this technique makes the proposed methodology appealing not only for small-scale laboratory purposes, but also for the industrial-scale production of supported metal nanoparticles.

Supported Bimetallic AuPd Nanoparticles as a Catalyst for the Selective Hydrogenation of Nitroarenes.

The solvent-free selective hydrogenation of nitrobenzene was carried out using a supported AuPd nanoparticles catalyst, prepared by the modified impregnation method (MIm), as efficient catalyst >99% yield of aniline (AN) was obtained after 15 h at 90 °C, 3 bar H2 that can be used without any further purification or separation, therefore reducing cost and energy input. Supported AuPd nanoparticles catalyst, prepared by MIm, was found to be active and stable even after four recycle experiments, whereas the same catalyst prepared by SIm was deactivated during the recycle experiments. The most effective catalyst was tested for the chemoselective hydrogenation of 4-chloronitrobenzene (CNB) to 4-chloroaniline (CAN). The activation energy of CNB to CAN was found to be 25 kJ mol-1, while that of CNB to AN was found to be 31 kJ mol-1. Based on this, the yield of CAN was maximized (92%) by the lowering the reaction temperature to 25 °C.

Synergistic Effect of Segregated Pd and Au Nanoparticles on Semiconducting SiC for Efficient Photocatalytic Hydrogenation of Nitroarenes.

Efficient catalytic hydrogenation of nitroarenes to anilines with molecular hydrogen at room temperature is still a challenge. In this study, this transformation was achieved by using a photocatalyst of SiC-supported segregated Pd and Au nanoparticles. Under visible-light irradiation, the nitrobenzene hydrogenation reached a turnover frequency as high as 1715 h-1 at 25 °C and 0.1 MPa of H2 pressure. This exceptional catalytic activity is attributed to a synergistic effect of Pd and Au nanoparticles on the semiconducting SiC, which is different from the known electronic or ensemble effects in Pd-Au catalysts. This kind of synergism originates from the plasmonic electron injection of Au and the Mott-Schottky contact at the interface between Pd and SiC. This three-component system changes the electronic structures of the SiC surface and produces more active sites to accommodate the active hydrogen that spills over from the surface of Pd. These active hydrogen species have weaker interactions with the SiC surface and thus are more mobile than on an inert support, resulting in an ease in reacting with the N═O bonds in nitrobenzene absorbed on SiC to produce aniline.

High performing and stable supported nano-alloys for the catalytic hydrogenation of levulinic acid to γ-valerolactone.

The catalytic hydrogenation of levulinic acid, a key platform molecule in many biorefinery schemes, into γ-valerolactone is considered as one of the pivotal reactions to convert lignocellulose-based biomass into renewable fuels and chemicals. Here we report on the development of highly active, selective and stable supported metal catalysts for this reaction and on the beneficial effects of metal nano-alloying. Bimetallic random alloys of gold-palladium and ruthenium-palladium supported on titanium dioxide are prepared with a modified metal impregnation method. Gold-palladium/titanium dioxide shows a marked,~27-fold increase in activity (that is, turnover frequency of 0.1 s(-1)) compared with its monometallic counterparts. Although ruthenium-palladium/titanium dioxide is not only exceptionally active (that is, turnover frequency of 0.6 s(-1)), it shows excellent, sustained selectivity to γ-valerolactone (99%). The dilution and isolation of ruthenium by palladium is thought to be responsible for this superior catalytic performance. Alloying, furthermore, greatly improves the stability of both supported nano-alloy catalysts.

The benzaldehyde oxidation paradox explained by the interception of peroxy radical by benzyl alcohol.

Benzaldehyde readily undergoes autoxidation to form benzoic acid on exposure to air at room temperature. Yet it can be formed in high yield from, for example, benzyl alcohol by oxidation using a variety of procedures and catalysts. Here we report the evidence to resolve this apparent paradox. It is confirmed that benzyl alcohol (and a number of other alcohols), even at low concentrations in benzaldehyde, inhibits the autoxidation. Furthermore we report on the structural features required for inhibition. Electron paramagnetic resonance spin trapping experiments demonstrate that benzyl alcohol intercepts, by hydrogen atom transfer, the benzoylperoxy radicals that play a key role in benzaldehyde autoxidation. A similar inhibition effect has also been observed for the aliphatic octanal/1-octanol system.

Switching-off toluene formation in the solvent-free oxidation of benzyl alcohol using supported trimetallic Au-Pd-Pt nanoparticles.

Trimetallic Au-Pd-Pt nanoparticles have been supported on activated carbon by the sol-immobilisation method. They are found to be highly active and selective catalysts for the solvent-free aerobic oxidation of benzyl alcohol. The addition of Pt promotes the selectivity to the desired product benzaldehyde at the expense of toluene formation. Detailed aberration corrected STEM-XEDS analysis confirmed that the supported particles are indeed Au-Pd-Pt ternary alloys, but also identified composition fluctuations from particle-to-particle which vary systematically with nanoparticle size.