Benzoxazine Monomers and Polymers Based on 3,3'-Dichloro-4,4'-Diaminodiphenylmethane: Synthesis and Characterization.

To reveal the effect of chlorine substituents in the ring of aromatic amine on the synthesis process of benzoxazine monomer and on its polymerization ability, as well as to develop a fire-resistant material, a previously unreported benzoxazine monomer based on 3,3'-dichloro-4,4'-diaminodiphenylmethane was obtained in toluene and mixture toluene/isopropanol. The resulting benzoxazine monomers were thermally cured for 2 h at 180 °C, 4 h at 200 °C, 2 h at 220 °C. A comparison between the rheological, thermal and fire-resistant properties of the benzoxazines based on 3,3'-dichloro-4,4'-diaminodiphenylmethane and, for reference, 4,4'-diaminodimethylmethane was made. The effect of the reaction medium on the structure of the oligomeric fraction and the overall yield of the main product were studied and the toluene/ethanol mixture was found to provide the best conditions; however, in contrast to most known diamine-based benzoxazines, synthesis in the pure toluene is also possible. The synthesized monomers can be used as thermo- and fire-resistant binders for polymer composite materials, as well as hardeners for epoxy resins. Chlorine-containing polybenzoxazines require more severe conditions for polymerization but have better fire resistance.

Synthesis of Phosphazene-Containing, Bisphenol A-Based Benzoxazines and Properties of Corresponding Polybenzoxazines.

With the aim of obtaining halogen-free polybenzoxazazines with reduced flammability, phosphazene-containing benzoxazines (PhBZ) were synthesized in a two-stage method. In the first stage of the reaction of hexachlorocycotriphosphazene with bisphenol A at molar ratios of 1:12, 1:16, and 1:24, respectively, mixtures of bisphenol and hydroxyaryloxycyclotriphosphazenes were obtained, which mainly contained P3N3[OC6H4C(CH3)3C6H4OH]6. In the second stage, when these mixtures interacted with aniline and an excess of paraformaldehyde in toluene at 80-90 °C, PhBZ containing 20-50% of the phosphazene component with Mw 1200-5800 were formed. According to 1H and 13C NMR spectroscopy, PhBZ contain a small amount of oligomeric compounds with Mannich aminomethylene bridges. With an increase of the content of the phosphazene component, the curing temperature of PhBZ decreases from 242 °C to 215 °C. Cured PhBZ samples with a phosphorus content of more than 1.5% have increased flammability resistance according to UL-94.

Synthesis of Resorcinol-Based Phosphazene-Containing Epoxy Oligomers.

Phosphazene-containing epoxy-resorcinol oligomers (PERO) are synthesized in one stage with the direct interaction of hexachlorocyclotriphosphazene (HCP), resorcinol, and epichlorohydrin in the presence of solid NaOH. Depending on the initial ratio of HCP:resorcinol, PERO contains from 20 to 50 wt.% phosphazene component (2.0⁻4.8% of phosphorus) and have an epoxy group content up to 30 %. Products are characterized using ¹H and 31P NMR spectroscopy, MALDI-TOF mass spectrometry, and elemental analysis. According to mass spectrometry, the phosphazene fractions of PERO include up to 30 individual compounds with a predominance of cyclotriphosphazenes with one unsubstituted chlorine atom and four or five glycidyl groups. PERO has a lower viscosity in comparison with similar resins based on bisphenol A, which can simplify their use as a binder for polymer composites, adhesives, and paints.