Water Structuring Induces Nonuniversal Hydration Repulsion between Polar Surfaces: Quantitative Comparison between Molecular Simulations, Theory, and Experiments.

Polar surfaces in water typically repel each other at close separations, even if they are charge-neutral. This so-called hydration repulsion balances the van der Waals attraction and gives rise to a stable nanometric water layer between the polar surfaces. The resulting hydration water layer is crucial for the properties of concentrated suspensions of lipid membranes and hydrophilic particles in biology and technology, but its origin is unclear. It has been suggested that surface-induced molecular water structuring is responsible for the hydration repulsion, but a quantitative proof of this water-structuring hypothesis is missing. To gain an understanding of the mechanism causing hydration repulsion, we perform molecular simulations of different planar polar surfaces in water. Our simulated hydration forces between phospholipid bilayers agree perfectly with experiments, validating the simulation model and methods. For the comparison with theory, it is important to split the simulated total surface interaction force into a direct contribution from surface-surface molecular interactions and an indirect water-mediated contribution. We find the indirect hydration force and the structural water-ordering profiles from the simulations to be in perfect agreement with the predictions from theoretical models that account for the surface-induced water ordering, which strongly supports the water-structuring hypothesis for the hydration force. However, the comparison between the simulations for polar surfaces with different headgroup architectures reveals significantly different decay lengths of the indirect water-mediated hydration-force, which for laterally homogeneous water structuring would imply different bulk-water properties. We conclude that laterally inhomogeneous water ordering, induced by laterally inhomogeneous surface structures, shapes the hydration repulsion between polar surfaces in a decisive manner. Thus, the indirect water-mediated part of the hydration repulsion is caused by surface-induced water structuring but is surface-specific and thus nonuniversal.

Anion Competition at Positively Charged Surfactant Monolayers.

Interactions of anions with hydrophobic surfaces of proteins and water-soluble polymers depend on the ability of the ions to shed their hydration shells. At positively charged surfactant monolayers, the interactions of anions are less well understood. Due to the interplay of electrostatic surface forces, hydration effects, and ion-ion interactions in the electrostatic double layer, a comprehensive microscopic picture remains elusive. Herein, we study the interactions of chloride, bromide, and a mixture of these two anions at the aqueous interface of dihexadecyldimethylammonium (DHDA+) and dioctadecyldimethylammonium (DODA+) cationic monolayers. Using molecular dynamics simulations and three surface-sensitive X-ray scattering techniques, we demonstrate that bromide interacts preferentially over chloride with both monolayers. The structure of the two monolayers and their interfacial electron density profiles obtained from the simulations quantitatively reproduce the experimental data. We observe that chloride and bromide form contact ion pairs with the quaternary ammonium groups on both monolayers. However, ion pairing with bromide leads to a greater reduction in the number of water molecules hydrating the anion, resulting in more energetically stable ion pairs. This leads to long-range (>3 nm) lateral correlations between bromide ions on the structured DODA+ monolayer. These observations indicate that ion hydration is the dominant factor determining the interfacial electrolyte structure.

Influence of adhesion-promoting glycolipids on the structure and stability of solid-supported lipid double-bilayers.

Glycolipids have a considerable influence on the interaction between adjacent biomembranes and can promote membrane adhesion trough favorable sugar-sugar "bonds" even at low glycolipid fractions. Here, in order to obtain structural insights into this phenomenon, we utilize neutron reflectometry in combination with a floating lipid bilayer architecture that brings two glycolipid-loaded lipid bilayers to close proximity. We find that selected glycolipids with di-, or oligosaccharide headgroups affect the inter-bilayer water layer thickness and appear to contribute to the stability of the double-bilayer architecture by promoting adhesion of adjacent bilayers even against induced electrostatic repulsion. However, we do not observe any redistribution of glycolipids that would maximize the density of sugar-sugar contacts. Our results point towards possible strategies for the investigation of interactions between cell surfaces involving specific protein-protein, lipid-lipid, or protein-lipid binding.

Understanding the "Berg limit": the 65° contact angle as the universal adhesion threshold of biomatter.

Surface phenomena in aqueous environments such as long-range hydrophobic attraction, macromolecular adhesion, and even biofouling are predominantly influenced by a fundamental parameter-the water contact angle. The minimal contact angle required for these and related phenomena to occur has been repeatedly reported to be around 65° and is commonly referred to as the "Berg limit." However, the universality of this specific threshold across diverse contexts has remained puzzling. In this perspective article, we aim to rationalize the reoccurrence of this enigmatic contact angle. We show that the relevant scenarios can be effectively conceptualized as three-phase problems involving the surface of interest, water, and a generic oil-like material that is representative of the nonpolar constituents within interacting entities. Our analysis reveals that attraction and adhesion emerge when substrates display an underwater oleophilic character, corresponding to a "hydrophobicity under oil", which occurs for contact angles above approximately 65°. This streamlined view provides valuable insights into macromolecular interactions and holds implications for technological applications.

Lipid bilayer properties potentially contributed to the evolutionary disappearance of betaine lipids in seed plants.

BACKGROUND: Many organisms rely on mineral nutrients taken directly from the soil or aquatic environment, and therefore, developed mechanisms to cope with the limitation of a given essential nutrient. For example, photosynthetic cells have well-defined responses to phosphate limitation, including the replacement of cellular membrane phospholipids with non-phosphorous lipids. Under phosphate starvation, phospholipids in extraplastidial membranes are replaced by betaine lipids in microalgae. In higher plants, the synthesis of betaine lipid is lost, driving plants to other strategies to cope with phosphate starvation where they replace their phospholipids by glycolipids. RESULTS: The aim of this work was to evaluate to what extent betaine lipids and PC lipids share physicochemical properties and could substitute for each other. By neutron diffraction experiments and dynamic molecular simulation of two synthetic lipids, the dipalmitoylphosphatidylcholine (DPPC) and the dipalmitoyl-diacylglyceryl-N,N,N-trimethylhomoserine (DP-DGTS), we found that DP-DGTS bilayers are thicker than DPPC bilayers and therefore are more rigid. Furthermore, DP-DGTS bilayers are more repulsive, especially at long range, maybe due to unexpected unscreened electrostatic contribution. Finally, DP-DGTS bilayers could coexist in the gel and fluid phases. CONCLUSION: The different properties and hydration responses of PC and DGTS provide an explanation for the diversity of betaine lipids observed in marine organisms and for their disappearance in seed plants.

Effect of surfactants on the interfacial viscoelasticity and stability of silk fibroin at different oil-water interfaces.

BACKGROUND: The biocompatible amphiphilic silk fibroin, extracted from domesticated silkworms, can adsorb at the oil-water interface and form elastic interfacial layers. In this study, three surfactants (cationic cetyltrimethylammonium bromide, the nonionic polyoxyethylene sorbitan monolaurate, and the anionic sodium dodecyl sulfate) were selected to investigate, through interfacial shear rheology, the influences of surfactants on the interfacial viscoelasticity and stability of silk fibroin at the interfaces between water and two different oils. RESULTS: The presence of surfactant prolongs the equilibration time and enhances the interfacial elastic modulus and toughness of the interfacial silk fibroin layers, especially at the nonpolar dodecane-water interface. However, when the surfactant exceeds a critical concentration, the shear modulus and stability of interfacial silk fibroin layers begin to decrease due to the competitive adsorption of surfactant molecules and the weakening of the protein network. Owing to electrostatic interactions, the ionic surfactants cetyltrimethylammonium bromide and sodium dodecyl sulfate can form more hydrophobic complexes with silk fibroin, which results in higher shear moduli than for silk fibroin and silk fibroin-polyoxyethylene sorbitan monolaurate mixture. CONCLUSION: Both the surfactant type and oil polarity play important roles in the adsorption, shear viscoelasticity, and stability of silk fibroin at the oil-water interface. Enhanced interactions between a silk fibroin-surfactant mixture and the oil phase delay the equilibration of the adsorption layers but strengthen the stability of interfacial layers. © 2023 Society of Chemical Industry.

The Internal Structure of the Velvet Worm Projectile Slime: A Small-Angle Scattering Study.

For prey capture and defense, velvet worms eject an adhesive slime which has been established as a model system for recyclable complex liquids. Triggered by mechanical agitation, the liquid bio-adhesive rapidly transitions into solid fibers. In order to understand this mechanoresponsive behavior, here, the nanostructural organization of slime components are studied using small-angle scattering with neutrons and X-rays. The scattering intensities are successfully described with a three-component model accounting for proteins of two dominant molecular weight fractions and nanoscale globules. In contrast to the previous assumption that high molecular weight proteins-the presumed building blocks of the fiber core-are contained in the nanoglobules, it is found that the majority of slime proteins exist freely in solution. Only less than 10% of the slime proteins are contained in the nanoglobules, necessitating a reassessment of their function in fiber formation. Comparing scattering data of slime re-hydrated with light and heavy water reveals that the majority of lipids in slime are contained in the nanoglobules with homogeneous distribution. Vibrating mechanical impact under exclusion of air neither leads to formation of fibers nor alters the bulk structure of slime significantly, suggesting that interfacial phenomena and directional shearing are required for fiber formation.

Combining molecular dynamics simulations and x-ray scattering techniques for the accurate treatment of protonation degree and packing of ionizable lipids in monolayers.

The pH-dependent change in protonation of ionizable lipids is crucial for the success of lipid-based nanoparticles as mRNA delivery systems. Despite their widespread application in vaccines, the structural changes upon acidification are not well understood. Molecular dynamics simulations support structure prediction but require an a priori knowledge of the lipid packing and protonation degree. The presetting of the protonation degree is a challenging task in the case of ionizable lipids since it depends on pH and on the local lipid environment and often lacks experimental validation. Here, we introduce a methodology of combining all-atom molecular dynamics simulations with experimental total-reflection x-ray fluorescence and scattering measurements for the ionizable lipid Dlin-MC3-DMA (MC3) in POPC monolayers. This joint approach allows us to simultaneously determine the lipid packing and the protonation degree of MC3. The consistent parameterization is expected to be useful for further predictive modeling of the action of MC3-based lipid nanoparticles.

Cavitation in lipid bilayers poses strict negative pressure stability limit in biological liquids.

Biological and technological processes that involve liquids under negative pressure are vulnerable to the formation of cavities. Maximal negative pressures found in plants are around -100 bar, even though cavitation in pure bulk water only occurs at much more negative pressures on the relevant timescales. Here, we investigate the influence of small solutes and lipid bilayers, both constituents of all biological liquids, on the formation of cavities under negative pressures. By combining molecular dynamics simulations with kinetic modeling, we quantify cavitation rates on biologically relevant length scales and timescales. We find that lipid bilayers, in contrast to small solutes, increase the rate of cavitation, which remains unproblematically low at the pressures found in most plants. Only when the negative pressures approach -100 bar does cavitation occur on biologically relevant timescales. Our results suggest that bilayer-based cavitation is what generally limits the magnitude of negative pressures in liquids that contain lipid bilayers.

The Complete Phase Diagram of Monolayers of Enantiomeric N-Stearoyl-threonine Mixtures with Preferred Heterochiral Interactions.

Langmuir monolayers of chiral amphiphiles are well-controlled model systems for the investigation of phenomena related to stereochemistry. Here, we have investigated mixed monolayers of one pair of enantiomers (l and d) of the amino-acid-based amphiphile N-stearoyl-threonine. The monolayer characteristics were studied by pressure-area isotherm measurements and grazing incidence X-ray diffraction (GIXD) over a wide range of mixing ratios defined by the d-enantiomer mole fraction xD. While the isotherms provide insights into thermodynamical aspects, such as transition pressure, compression/decompression hysteresis, and preferential homo- and heterochiral interactions, GIXD reveals the molecular structural arrangements on the Ångström scale. Dominant heterochiral interactions in the racemic mixture lead to compound formation and the appearance of a nonchiral rectangular lattice, although the pure enantiomers form a chiral oblique lattice. Miscibility was found to be limited to mixtures with 0.27 ≲ xD ≲ 0.73, as well as to both outer edges (xD ≲ 0.08 and xD ≳ 0.92). Beyond this range, coexistence of oblique and rectangular lattices occurs, as is clearly seen in the GIXD patterns. Based on the results, a complete phase diagram with two eutectic points at xD ≈ 0.25 and xD ≈ 0.75 is proposed. Moreover, N-stearoyl-threonine was found to have a strong tendency to form a hydrogen-bonding network between the headgroups, which promotes superlattice formation.

A Multistate Adsorption Model for the Characterization of C13DMPO Adsorption Layers at the Aqueous Solution/Air Interface.

Experimental data for tridecyl dimethyl phosphine oxide (C13DMPO) adsorption layers at the water/air interface, including equilibrium surface tension and surface dilational viscoelasticity, are measured by bubble and drop profile analysis tensiometry at different solution concentrations and surface area oscillation frequencies. The results are used to assess the applicability of a multistate model with more than two possible adsorption states. For the experiments with single drops, the depletion of surfactant molecules due to adsorption at the drop surface is taken into account. For the assessment, the same set of model parameters is used for the description of all obtained experimental dependencies. The agreement between the proposed model and the experimental data shows that for the nonionic surfactant C13DMPO, the description of the adsorption layer behavior by three adsorption states is superior to that with only two adsorption states.

Stimuli-responsive polyelectrolyte surfactant complexes for the reversible control of solution viscosity.

Interactions of polyelectrolytes with oppositely charged surfactants can give rise to a large variety of self-assembled structures. Some of these systems cause a drastic increase in solution viscosity, which is related to the surfactant forming aggregates interconnecting several polyelectrolyte chains. For these aggregates to form, the surfactant needs to be sufficiently hydrophobic. Here, we present a system consisting of the anionic surfactant sodium monododecyl phosphate and the cationic cellulose-based polyelectrolyte JR 400. The hydrophobicity of the surfactant can be controlled by the solution's pH. At pH > 12, the surfactant headgroup bears two charges. As a consequence, the solution viscosity decreases drastically by up to two orders of magnitude, while it can be as high as 10 Pa s at lower pH. In this paper, we investigate the changes of the mesoscopic structure of the system which lead to such drastic changes in viscosity using small angle neutron scattering and neutron spin-echo spectroscopy. Such systems are potentially interesting as they allow for a modular design where stimuli responsiveness is introduced by relatively small amounts of surfactant reusing the same simple polyelectrolyte.

pH-Dependent physicochemical properties of ornithine lipid in mono- and bilayers.

In certain bacteria, phosphatidylethanolamine lipids (PEL) get largely replaced by phosphate-free ornithine lipids (OL) under conditions of phosphate starvation. It has so far been unknown how much these two lipid types deviate in their physicochemical properties, and how strongly bacteria thus have to adapt in order to compensate for the difference. Here, we use differential scanning calorimetry, X-ray scattering, and X-ray fluorescence to investigate the properties of OL with saturated C14 alkyl chains in mono- and bilayers. OL is found to have a greater tendency than chain-analogous PEL to form ordered structures and, in contrast to PEL, even a molecular superlattice based on a hydrogen bonding network between the headgroups. This superlattice is virtually electrically uncharged and persists over a wide pH range. Our results indicate that OL and PEL behave very differently in ordered single-component membranes but may behave more similarly in fluid multicomponent membranes.

Investigating the Conformation of Surface-Adsorbed Proteins with Standing-Wave X-ray Fluorescence.

Protein adsorption to surfaces is at the heart of numerous technological and bioanalytical applications, but sometimes, it is also associated with medical risks. To deepen our insights into processes involving layers of surface-adsorbed proteins, high-resolution structural information is essential. Here, we use standing-wave X-ray fluorescence (SWXF) in combination with an optimized liquid-cell setup to investigate the underwater conformation of the random-coiled phosphoprotein ß-casein adsorbed to hydrophilic and hydrophobized solid surfaces. The orientation of the protein, as determined through the distributions of sulfur and phosphorus, is found to be sensitive to the chemical nature of the substrate. While no preferred orientations are observed on hydrophobized surfaces, on hydrophilic Al oxide, ß-casein is adsorbed as a diblock copolymer with the phosphorylated domain I attached to the surface. Our results demonstrate that targeting biologically relevant chemical elements with SWXF enables a detailed investigation of biomolecular layers under near-physiological conditions.

Spatiotemporal Measurement of Osmotic Pressures by FRET Imaging.

Osmotic pressures (OPs) play essential roles in biological processes and numerous technological applications. However, the measurement of OP in situ with spatiotemporal resolution has not been achieved so far. Herein, we introduce a novel kind of OP sensor based on liposomes loaded with water-soluble fluorescent dyes exhibiting resonance energy transfer (FRET). The liposomes experience volume changes in response to OP due to water outflux. The FRET efficiency depends on the average distance between the entrapped dyes and thus provides a direct measure of the OP surrounding each liposome. The sensors exhibit high sensitivity to OP in the biologically relevant range of 0-0.3 MPa in aqueous solutions of salt, small organic molecules, and macromolecules. With the help of FRET microscopy, we demonstrate the feasibility of spatiotemporal OP imaging, which can be a promising new tool to investigate phenomena involving OPs and their dynamics in biology and technology.

Membrane Adhesion via Glycolipids Occurs for Abundant Saccharide Chemistries.

Membrane-bound oligosaccharides with specific chemistries are known to promote tight adhesion between adjacent membranes via the formation of weak saccharide bonds. However, in the literature, one can find scattered evidence that other, more abundant saccharide chemistries exhibit similar behavior. Here, the influence of various glycolipids on the interaction between adjacent membranes is systematically investigated with the help of small- and wide-angle x-ray scattering and complementary neutron diffraction experiments. Added electrostatic repulsion between the membrane surfaces is used to identify the formation of saccharide bonds and to challenge their stability against tensile stress. Some of the saccharide headgroup types investigated are able to bind adjacent membranes together, but this ability has no significant influence on the membrane bending rigidity. Our results indicate that glycolipid-mediated membrane adhesion is a highly abundant phenomenon and therefore potentially of great biological relevance.

Dynamics of Competitive Adsorption of Lipase and Ionic Surfactants at the Water-Air Interface.

Lipase is one of the most important enzymes playing a key role in many biological and chemical processes, in particular for fat hydrolysis in living systems and technological applications such as food production, medicine, and biodiesel production. As lipase is soluble in water, the major hydrolysis process occurs at the water-oil interface, where lipase can get in contact with the oil. To provide optimum conditions, the emulsification of the oil is essential to provide a large interfacial area which is generally done by adding surfactants. However, the presence of surfactants can influence the lipase activity and also cause competitive adsorption, resulting in a removal of lipase from the interface or its conformational changes in the solution bulk. Here we have studied the dynamics of competitive adsorption and interfacial elasticity of mixed solutions containing lipase and the anionic surfactant sodium dodecyl sulfate (SDS) or the cationic surfactant cetyltrimethylammonium bromide (CTAB), respectively, at the water-air interface. The experiments were performed with a special coaxial double capillary setup for drop bulk-interface exchange developed for the drop profile analysis tensiometer PAT with two protocols: sequential and simultaneous adsorption of single components and mixed systems. The results in terms of dynamic surface tension and dilational viscoelasticity illustrate fast and complete desorption of a preadsorbed CTAB and SDS layers via subphase exchange with a buffer solution. In contrast, the preadsorbed lipase layer cannot be removed either by SDS or CTAB from the interface during drop bulk exchange with a buffer solution due to the unfolding process and conformation evolution of the protein molecules at the interface. In the opposite case, lipase can remove preadsorbed SDS and CTAB. The dynamic surface tension and viscoelasticity data measured before and after subphase exchange show joint adsorption of lipase and CTAB in the form of complexes, while SDS is adsorbed in competition with lipase. The results are in good correlation with the determined surface charges of the lipase gained by computational simulations which show a dominant negatively charged surface for lipase that can interact with the cationic CTAB while partial positively charged regions are observed for the interaction with the anionic SDS.

Adsorption of Photoresponsive Surfactants at Solid-Liquid Interfaces.

We report on the adsorption kinetics of azobenzene-containing surfactants on solid surfaces of different hydrophobicity. The understanding of this processes is of great importance for many interfacial phenomena that can be actuated and triggered by light, since the surfactant molecules contain a photoresponsive azobenzene group in their hydrophobic tail. Three surfactant types are studied, differing in the spacer connecting the headgroup and the azobenzene unit by between 6 and 10 CH2 groups. Under irradiation with light of a suitable wavelength, the azobenzene undergoes reversible photoisomerization between two states, a nonpolar trans-state and a highly polar cis-state. Consequently, the surfactant molecule changes its hydrophobicity and thus affinity to a surface depending on the photoisomerization state of the azobenzene. The adsorption behavior on hydrophilic (glass) and hydrophobic (TeflonAF) surfaces is analyzed using quartz crystal microbalance with dissipation (QCM-D) and ζ-potential measurements. At equilibrium, the adsorbed surfactant amount is almost twice as large on glass compared to TeflonAF for both isomers. The adsorption rate for the trans-isomers on both surfaces is similar, but the desorption rate of the trans-isomers is faster at the glass-water interface than at the Teflon-water interface. This result demonstrates that the trans-isomers have higher affinity for the glass surface, so the trans-to-cis ratios on glass and TeflonAF are 80/1 and 2/1, respectively, with similar trends for all three surfactant types.

Influence of pH on the surface and foaming properties of aqueous silk fibroin solutions.

Silk fibroin (SF) adsorbs at the air/water interface, reduces the surface tension, and forms interfacial layers suppressing bubble coalescence and stabilizing foam. Variation of pH alters the inter-molecular interactions of SF in the interfacial layers and thus interfacial network formation, dilatational visco-elasticity and foaming properties. At pH 4, around the isoelectric point, the reduced electrostatic repulsion between the SF molecules results in thicker adsorbed layers, but adsorption rate, foaming rate and foam stability are lower than at pH 3 and pH 7. At the highest pH investigated (pH 7), the small aggregate size and high protein flexibility lead to the formation of more ordered and stable viscoelastic interfacial networks, which are resistant to deformation breakage and generate homogeneous, denser and more stable foams.

Structure and Conformation of Wild-Type Bacterial Lipopolysaccharide Layers at Air-Water Interfaces.

The outer membrane of Gram-negative bacteria is of great scientific interest because it mediates the action of antimicrobial agents. The membrane surface is composed of lipopolysaccharide (LPS) molecules with negatively charged oligosaccharide headgroups. To a certain fraction, LPSs additionally display linear polysaccharides termed O-side chains (OSCs). Structural studies on bacterial outer surfaces models, based on LPS monolayers at air-water interfaces, have so far dealt only with rough mutant LPSs lacking these OSCs. Here, we characterize monolayers of wild-type LPS from Escherichia coli O55:B5 featuring strain-specific OSCs in the presence of defined concentrations of monovalent and divalent ions. Pressure-area isotherms yield insight into in-plane molecular interactions and monolayer elastic moduli. Structural investigations by x-ray and neutron reflectometry reveal the saccharide conformation and allow quantifying the area per molecule and the fraction of LPS molecules carrying OSCs. The OSC conformation is satisfactorily described by the self-consistent field theory for end-grafted polymer brushes. The monolayers exhibit a significant structural response to divalent cations, which goes beyond generic electrostatic screening.