RESUMEN
Since their discovery in 19601, metallic glasses based on a wide range of elements have been developed2. However, the theoretical prediction of glass-forming compositions is challenging and the discovery of alloys with specific properties has so far largely been the result of trial and error3-8. Bulk metallic glasses can exhibit strength and elasticity surpassing those of conventional structural alloys9-11, but the mechanical properties of these glasses are critically dependent on the glass transition temperature. At temperatures approaching the glass transition, bulk metallic glasses undergo plastic flow, resulting in a substantial decrease in quasi-static strength. Bulk metallic glasses with glass transition temperatures greater than 1,000 kelvin have been developed, but the supercooled liquid region (between the glass transition and the crystallization temperature) is narrow, resulting in very little thermoplastic formability, which limits their practical applicability. Here we report the design of iridium/nickel/tantalum metallic glasses (and others also containing boron) with a glass transition temperature of up to 1,162 kelvin and a supercooled liquid region of 136 kelvin that is wider than that of most existing metallic glasses12. Our Ir-Ni-Ta-(B) glasses exhibit high strength at high temperatures compared to existing alloys: 3.7 gigapascals at 1,000 kelvin9,13. Their glass-forming ability is characterized by a critical casting thickness of three millimetres, suggesting that small-scale components for applications at high temperatures or in harsh environments can readily be obtained by thermoplastic forming14. To identify alloys of interest, we used a simplified combinatorial approach6-8 harnessing a previously reported correlation between glass-forming ability and electrical resistivity15-17. This method is non-destructive, allowing subsequent testing of a range of physical properties on the same library of samples. The practicality of our design and discovery approach, exemplified by the identification of high-strength, high-temperature bulk metallic glasses, bodes well for enabling the discovery of other glassy alloys with exciting properties.
RESUMEN
Ni-free Ti-based bulk metallic glasses (BMGs) are exciting materials for biomedical applications because of their outstanding biocompatibility and advantageous mechanical properties. The glassy nature of BMGs allows them to be shaped and patterned via thermoplastic forming (TPF). This work demonstrates the versatility of the TPF technique to create micro- and nano-patterns and hierarchical structures on Ti40Zr10Cu34Pd14Sn2 BMG. Particularly, a hierarchical structure fabricated by a two-step TPF process integrates 400 nm hexagonal close-packed protrusions on 2.5 µm square protuberances while preserving the advantageous mechanical properties from the as-cast material state. The correlations between thermal history, structure, and mechanical properties are explored. Regarding biocompatibility, Ti40Zr10Cu34Pd14Sn2 BMGs with four surface topographies (flat, micro-patterned, nano-patterned, and hierarchical-structured surfaces) are investigated using Saos-2 cell lines. Alamar Blue assay and live/dead analysis show that all tested surfaces have good cell proliferation and viability. Patterned surfaces are observed to promote the formation of longer filopodia on the edge of the cytoskeleton, leading to star-shaped and dendritic cell morphologies compared with the flat surface. In addition to potential implant applications, TPF-patterned Ti-BMGs enable a high level of order and design flexibility on the surface topography, expanding the available toolbox for studying cell behavior on rigid and ordered surfaces.
RESUMEN
Despite the importance of glass forming ability as a major alloy characteristic, it is poorly understood and its quantification has been experimentally laborious and computationally challenging. Here, we uncover that the glass forming ability of an alloy is represented in its amorphous structure far away from equilibrium, which can be exposed by conventional X-ray diffraction. Specifically, we fabricated roughly 5,700 alloys from 12 alloy systems and characterized the full-width at half-maximum, Δq, of the first diffraction peak in the X-ray diffraction pattern. A strong correlation between high glass forming ability and a large Δq was found. This correlation indicates that a large dispersion of structural units comprising the amorphous structure is the universal indicator for high metallic glass formation. When paired with combinatorial synthesis, the correlation enhances throughput by up to 100 times compared to today's state-of-the-art combinatorial methods and will facilitate the discovery of bulk metallic glasses.
Asunto(s)
Aleaciones , Vidrio , Aleaciones/química , Vidrio/química , Difracción de Rayos XRESUMEN
The origin of limited plasticity in metallic glasses is elusive, with no apparent link to their atomic structure. We propose that the response of the glassy structure to applied stress, not the original structure itself, provides a gauge to predict the degree of plasticity. We carried out high-energy x-ray diffraction on various bulk metallic glasses (BMGs) under uniaxial compression within the elastic limit and evaluated the anisotropic pair distribution function. We show that the extent of local deviation from the affine (uniform) deformation in the elastic regime is strongly correlated with the plastic behavior of BMGs beyond yield, across chemical compositions and sample history. The results suggest that the propensity for collective local atomic rearrangements under stress promotes plasticity.
RESUMEN
For nanostructures in advanced electronic and plasmonic systems, a single-crystal structure with controlled orientation is essential. However, the fabrication of such devices has remained challenging, as current nanofabrication methods often suffer from either polycrystalline growth or the difficulty of integrating single crystals with substrates in desired orientations and locations to create functional devices. Here we report a thermomechanical method for the controlled growth of single-crystal nanowire arrays, which enables the simultaneous synthesis, alignment, and patterning of nanowires. Within such diffusion-based thermomechanical nanomolding (TMNM), the substrate material diffuses into nanosized cavities under an applied pressure gradient at a molding temperature of â¼0.4 times the material's melting temperature. Vertically grown face-centered cubic (fcc) nanowires with the [110] direction in an epitaxial relationship with the (110) substrate are demonstrated. The ability to control the crystal structure through the substrate takes TMNM a major step further, potentially allowing all fcc and body-centered cubic (bcc) materials to be integrated as single crystals into devices.
Asunto(s)
Nanoestructuras , Nanocables , Nanoestructuras/química , Nanotecnología/métodos , Nanocables/química , TemperaturaRESUMEN
Large-scale, controlled fabrication of ordered phases is challenging at the nanoscale, yet highly demanded as their well-ordered structure and chemistry is the key for advanced functionality. Here, we demonstrate a general nanomolding process of ordered phases based on atomic diffusion. Resulting nanowires are single crystals and maintain their composition and structure throughout their length, which we explain by a self-ordering process originating from their narrow Gibbs free energy. The versatility, control, and precision of this thermomechanical nanomolding method of ordered phases provides new insights into single crystal growth and suggest itself as a technology to enable wide spread usage for nanoscale and quantum devices.
RESUMEN
We report on a thermomechanical nanomolding method for crystalline metals. Quantified by the aspect ratio, this process becomes easier with decreasing mold diameter. As the responsible underlying diffusion mechanism is present in all metals and alloys, the discovered nanomolding process provides a toolbox to shape essentially any metal and alloy into a nanofeature. Technologically, this highly versatile and practical thermomechanical nanomolding technique offers a method to fabricate high-surface-area metallic nanostructures which are impactful in diverse fields of applications including catalysts, sensors, photovoltaics, microelectronics, and plasmonics.
RESUMEN
Micro- and nanoresonators have important applications including sensing, navigation, and biochemical detection. Their performance is quantified using the quality factor Q, which gives the ratio of the energy stored to the energy dissipated per cycle. Metallic glasses are a promising material class for micro- and nanoscale resonators since they are amorphous and can be fabricated precisely into complex shapes on these length scales. To understand the intrinsic dissipation mechanisms that ultimately limit large Q-values in metallic glasses, we perform molecular dynamics simulations to model metallic glass resonators subjected to bending vibrations at low temperatures. We calculate the power spectrum of the kinetic energy, redistribution of energy from the fundamental mode of vibration, and Q vs the kinetic energy per atom K of the excitation. In the harmonic and anharmonic response regimes where there are no atomic rearrangements, we find that Q â ∞ over the time periods we consider (since we do not consider coupling to the environment). We identify a characteristic Kr above which atomic rearrangements occur, and there is significant energy leakage from the fundamental mode to higher frequencies, causing finite Q. Thus, Kr is a critical parameter determining resonator performance. We show that Kr decreases as a power-law, Kr â¼ N-k, with increasing system size N, where k ≈ 1.3. We estimate the critical strain ⟨γr⟩â¼ 10-8 for micrometer-sized resonators below which atomic rearrangements do not occur in the millikelvin temperature range, and thus, large Q-values can be obtained when they are operated below γr. We also find that Kr for amorphous resonators is comparable to that for resonators with crystalline order.
RESUMEN
Surface engineering over multiple length scales is critical for electronics, photonics, and enabling multifunctionality in synthetic materials. Here, we demonstrate a sequential embossing technique for building multi-tier patterns in metals by controlling the size-dependent thermoplastic forming of metallic glasses. Sub-100 nm to millimeter sized features are sculpted sequentially to allow an exquisite control of surface properties. The process can be integrated with net-shaping to transfer functional patterns on three-dimensional metal parts.
RESUMEN
The identification of multicomponent alloys out of a vast compositional space is a daunting task, especially for bulk metallic glasses composed of three or more elements. Despite an increasing theoretical understanding of glass formation, bulk metallic glasses are predominantly developed through a sequential and time-consuming trial-and-error approach. Even for binary systems, accurate quantum mechanical approaches are still many orders of magnitude away from being able to simulate the relatively slow kinetics of glass formation. Here, we present a high-throughput strategy where â¼3,000 alloy compositions are fabricated simultaneously and characterized for thermoplastic formability through parallel blow forming. Using this approach, we identified the composition with the highest thermoplastic formability in the glass-forming system Mg-Cu-Y. The method provides a versatile toolbox for unveiling complex correlations of material properties and glass formation, and should facilitate a drastic increase in the discovery rate of metallic glasses.
RESUMEN
We studied the effect of crystallization on the embrittlement of bulk metallic glasses. Specifically, we measured fracture toughness for Zr(44)Ti(11)Cu(10)Ni(10)Be(25) and Pd(43)Cu(27)Ni(10)P(20) after annealing at various times to introduce controlled volume fraction of crystallization. We found that crystallization of up to â¼6% by volume does not measurably affect fracture toughness. When exceeding â¼6%, a dramatic drop in fracture toughness occurs; an additional 1% of crystallization reduces fracture toughness by 50%. Such a dramatic transition can be explained by the interaction among the crystals' stress fields in the amorphous matrix that becomes effective at â¼7% crystallinity. Our findings of a critical crystallization for embrittlement of metallic glasses help in designing tough metallic glasses and their composites, as well as defining processing protocols for the unique thermoplastic forming of metallic glasses to avoid embrittlement.
RESUMEN
Bulk metallic glasses (BMGs) are ideal for nanomoulding as they possess desirable strength for molds as well as for moldable materials and furthermore lack intrinsic size limitations. Despite their attractiveness, only recently Pt-based BMGs have been successfully molded into pores ranging 10-100 nm (Kumar et al 2009 Nature 457 868-72). Here, we introduce a quantitative theory, which reveals previous challenges in filling nanosized pores. This theory considers, in addition to a viscous and a capillary term, also oxidation, which becomes increasingly more important on smaller length scales. Based on this theory we construct a nanomoulding processing map for BMG, which reveals the limiting factors for BMG nanomoulding. Based on the quantitative prediction of the processing map, we introduce a strategy to reduce the capillary effect through a wetting layer, which allows us to mold non-noble BMGs below 1 µm in air. An additional benefit of this strategy is that it drastically facilitates demoulding, one of the main challenges of nanomoulding in general.
RESUMEN
Nanoimprinting promises low-cost fabrication of micro- and nano-devices by embossing features from a hard mould onto thermoplastic materials, typically polymers with low glass transition temperature. The success and proliferation of such methods critically rely on the manufacturing of robust and durable master moulds. Silicon-based moulds are brittle and have limited longevity. Metal moulds are stronger than semiconductors, but patterning of metals on the nanometre scale is limited by their finite grain size. Amorphous metals (metallic glasses) exhibit superior mechanical properties and are intrinsically free from grain size limitations. Here we demonstrate direct nanopatterning of metallic glasses by hot embossing, generating feature sizes as small as 13 nm. After subsequently crystallizing the as-formed metallic glass mould, we show that another amorphous sample of the same alloy can be formed on the crystallized mould. In addition, metallic glass replicas can also be used as moulds for polymers or other metallic glasses with lower softening temperatures. Using this 'spawning' process, we can massively replicate patterned surfaces through direct moulding without using conventional lithography. We anticipate that our findings will catalyse the development of micro- and nanoscale metallic glass applications that capitalize on the outstanding mechanical properties, microstructural homogeneity and isotropy, and ease of thermoplastic forming exhibited by these materials.
RESUMEN
Bulk metallic glasses (BMGs) are amorphous alloys with desirable mechanical properties and processing capabilities. To date, the design of new BMGs has largely employed empirical rules and trial-and-error experimental approaches. Ab initio computational methods are currently prohibitively slow to be practically used in searching the vast space of possible atomic combinations for bulk glass formers. Here, we perform molecular dynamics simulations of a coarse-grained, anisotropic potential, which mimics interatomic covalent bonding, to measure the critical cooling rates for metal-metalloid alloys as a function of the atomic size ratio σS/σL and number fraction xS of the metalloid species. We show that the regime in the space of σS/σL and xS where well-mixed, optimal glass formers occur for patchy and LJ particle mixtures, coincides with that for experimentally observed metal-metalloid glass formers. Thus, our simple computational model provides the capability to perform combinatorial searches to identify novel glass-forming alloys.
RESUMEN
When a liquid is cooled well below its melting temperature at a rate that exceeds the critical cooling rate Rc, the crystalline state is bypassed and a metastable, amorphous glassy state forms instead. Rc (or the corresponding critical casting thickness dc) characterizes the glass-forming ability (GFA) of each material. While silica is an excellent glass-former with small Rc < 10(-2) K/s, pure metals and most alloys are typically poor glass-formers with large Rc > 10(10) K/s. Only in the past thirty years have bulk metallic glasses (BMGs) been identified with Rc approaching that for silica. Recent simulations have shown that simple, hard-sphere models are able to identify the atomic size ratio and number fraction regime where BMGs exist with critical cooling rates more than 13 orders of magnitude smaller than those for pure metals. However, there are a number of other features of interatomic potentials beyond hard-core interactions. How do these other features affect the glass-forming ability of BMGs? In this manuscript, we perform molecular dynamics simulations to determine how variations in the softness and non-additivity of the repulsive core and form of the interatomic pair potential at intermediate distances affect the GFA of binary alloys. These variations in the interatomic pair potential allow us to introduce geometric frustration and change the crystal phases that compete with glass formation. We also investigate the effect of tuning the strength of the many-body interactions from zero to the full embedded atom model on the GFA for pure metals. We then employ the full embedded atom model for binary BMGs and show that hard-core interactions play the dominant role in setting the GFA of alloys, while other features of the interatomic potential only change the GFA by one to two orders of magnitude. Despite their perturbative effect, understanding the detailed form of the intermetallic potential is important for designing BMGs with cm or greater casting thickness.
RESUMEN
The likelihood that an undercooled liquid vitrifies or crystallizes depends on the cooling rate R. The critical cooling rate R(c), below which the liquid crystallizes upon cooling, characterizes the glass-forming ability (GFA) of the system. While pure metals are typically poor glass formers with R(c)>10(12)K/s, specific multi-component alloys can form bulk metallic glasses (BMGs) even at cooling rates below Râ¼1 K/s. Conventional wisdom asserts that metal alloys with three or more components are better glass formers (with smaller R(c)) than binary alloys. However, there is currently no theoretical framework that provides quantitative predictions for R(c) for multi-component alloys. In this manuscript, we perform simulations of ternary hard-sphere systems, which have been shown to be accurate models for the glass-forming ability of BMGs, to understand the roles of geometric frustration and demixing in determining R(c). Specifically, we compress ternary hard sphere mixtures into jammed packings and measure the critical compression rate, below which the system crystallizes, as a function of the diameter ratios σ(B)/σ(A) and σ(C)/σ(A) and number fractions x(A), x(B), and x(C). We find two distinct regimes for the GFA in parameter space for ternary hard spheres. When the diameter ratios are close to 1, such that the largest (A) and smallest (C) species are well-mixed, the GFA of ternary systems is no better than that of the optimal binary glass former. However, when σ(C)/σ(A) â² 0.8 is below the demixing threshold for binary systems, adding a third component B with σ(C) < σ(B) < σ(A) increases the GFA of the system by preventing demixing of A and C. Analysis of the available data from experimental studies indicates that most ternary BMGs are below the binary demixing threshold with σ(C)/σ(A) < 0.8.
RESUMEN
The quantitative model proposed here for nanoimprinting by thermoplastic compression molding is focused on bulk metallic glasses (BMGs), but it is also applicable to polymers and other thermoplastic materials. In our model the flow and pressure fields are evaluated using the lubrication theory, and the effect of molding pressure, BMG viscosity, and capillary pressure on the spatial distribution of nanoimprinted features is determined. For platinum-based BMG the theory that takes into account capillary pressure but no other surface stresses agrees very well with experimental results. For palladium-based BMG (prone to oxidation) the extended theory includes an additional threshold pressure required to break the oxide layer that forms on the BMG surface. Our analysis provides important insights into flow behavior of BMG supercooled liquids. In particular, a new method for measuring surface tension and viscosity of BMGs and evaluating the strength of the surface oxide layer is demonstrated.
RESUMEN
Bulk metallic glasses (BMGs) are produced by rapidly thermally quenching supercooled liquid metal alloys below the glass transition temperature at rates much faster than the critical cooling rate R(c) below which crystallization occurs. The glass-forming ability of BMGs increases with decreasing R(c), and thus good glass-formers possess small values of R(c). We perform molecular dynamics simulations of binary Lennard-Jones (LJ) mixtures to quantify how key parameters, such as the stoichiometry, particle size difference, attraction strength, and heat of mixing, influence the glass-formability of model BMGs. For binary LJ mixtures, we find that the best glass-forming mixtures possess atomic size ratios (small to large) less than 0.92 and stoichiometries near 50:50 by number. In addition, weaker attractive interactions between the smaller atoms facilitate glass formation, whereas negative heats of mixing (in the experimentally relevant regime) do not change R(c) significantly. These results are tempered by the fact that the slowest cooling rates achieved in our simulations correspond to ~10(11) K/s, which is several orders of magnitude higher than R(c) for typical BMGs. Despite this, our studies represent a first step in the development of computational methods for quantitatively predicting glass-formability.
RESUMEN
Reducing the sample size can profoundly impact properties of bulk metallic glasses. Here, we systematically reduce the length scale of Au and Pt-based metallic glasses and study their vitrification behavior and atomic mobility. For this purpose, we exploit fast scanning calorimetry (FSC) allowing to study glassy dynamics in an exceptionally wide range of cooling rates and frequencies. We show that the main α relaxation process remains size independent and bulk-like. In contrast, we observe pronounced size dependent vitrification kinetics in micrometer-sized glasses, which is more evident for the smallest samples and at low cooling rates, resulting in more than 40 K decrease in fictive temperature, Tf, with respect to the bulk. We discuss the deep implications on how this outcome can be used to convey glasses to low energy states.