Magnetoencephalography and normal pressure hydrocephalus: A case report.

A 82-year-old male experiencing headaches, dementia, urinary incontinence and gait instability was diagnosed with normal pressure hydrocephalus (NPH) and underwent a resting state magnetoencephalography (MEG) examination. MEG data were recorded in a magnetically shielded room with a whole-head 122 channel biomagnetometer. Following MEG, a ventriculoperitoneal (VP) shunt was placed in his head and greatly improved his symptomatology. Spontaneous MEG recordings revealed lower magnetic fields at frontal and frontotemporal regions compared to central and posterior regions. This finding correlated well with the significant ventricular distention, and specifically the enlargement of the frontal horns of the lateral ventricles, observed in presurgical CT. The regional pattern of MEG signal decrease in NPH seems to be quite different from that encountered in brain atrophy. In the latter case, a more generalized distribution of low magnetic fields is observed, possibly reflecting the high sensitivity of MEG to activity originating in sulci. Acquired data suggest that MEG may be able to differentiate between NPH and brain atrophy. Furthermore, MEG could potentially constitute a non-invasive, non-imaging tool, useful in the selection of patients with NPH to undergo shunt surgery. The findings of this study warrant further research in patient groups before firm conclusions can be drawn.

Evaluation of artificial time series microarray data for dynamic gene regulatory network inference.

High-throughput technology like microarrays is widely used in the inference of gene regulatory networks (GRNs). We focused on time series data since we are interested in the dynamics of GRNs and the identification of dynamic networks. We evaluated the amount of information that exists in artificial time series microarray data and the ability of an inference process to produce accurate models based on them. We used dynamic artificial gene regulatory networks in order to create artificial microarray data. Key features that characterize microarray data such as the time separation of directly triggered genes, the percentage of directly triggered genes and the triggering function type were altered in order to reveal the limits that are imposed by the nature of microarray data on the inference process. We examined the effect of various factors on the inference performance such as the network size, the presence of noise in microarray data, and the network sparseness. We used a system theory approach and examined the relationship between the pole placement of the inferred system and the inference performance. We examined the relationship between the inference performance in the time domain and the true system parameter identification. Simulation results indicated that time separation and the percentage of directly triggered genes are crucial factors. Also, network sparseness, the triggering function type and noise in input data affect the inference performance. When two factors were simultaneously varied, it was found that variation of one parameter significantly affects the dynamic response of the other. Crucial factors were also examined using a real GRN and acquired results confirmed simulation findings with artificial data. Different initial conditions were also used as an alternative triggering approach. Relevant results confirmed that the number of datasets constitutes the most significant parameter with regard to the inference performance.

Quantitative texture analysis of brain white matter lesions derived from T2-weighted MR images in MS patients with clinically isolated syndrome.

INTRODUCTION: This study investigates the application of texture analysis methods on brain T2-white matter lesions detected with magnetic resonance imaging (MRI) for the prognosis of future disability in subjects diagnosed with clinical isolated syndrome (CIS) of multiple sclerosis (MS). METHODS: Brain lesions and normal appearing white matter (NAWM) from 38 symptomatic untreated subjects diagnosed with CIS as well as normal white matter (NWM) from 20 healthy volunteers, were manually segmented, by an experienced MS neurologist, on transverse T2-weighted images obtained from serial brain MR imaging scans (0 and 6-12 months). Additional clinical information in the form of the Expanded Disability Status Scale (EDSS), a scale from 0 to 10, which provides a way of quantifying disability in MS and monitoring the changes over time in the level of disability, were also provided. Shape and most importantly different texture features including GLCM and laws were then extracted for all above regions, after image intensity normalization. RESULTS: The findings showed that: (i) there were significant differences for the texture futures extracted between the NAWM and lesions at 0 month and between NAWM and lesions at 6-12 months. However, no significant differences were found for all texture features extracted when comparing lesions temporally at 0 and 6-12 months with the exception of contrast (gray level difference statistics-GLDS) and difference entropy (spatial gray level dependence matrix-SGLDM); (ii) significant differences were found between NWM and NAWM for most of the texture features investigated in this study; (iii) there were significant differences found for the lesion texture features at 0 month for those with EDSS≤2 versus those with EDSS>2 (mean, median, inverse difference moment and sum average) and for the lesion texture features at 6-12 months with EDSS>2 and EDSS≤2 for the texture features (mean, median, entropy and sum average). It should be noted that whilst there were no differences in entropy at time 0 between the two groups, significant change was observed at 6-12 months, relating the corresponding features to the follow-up and disability (EDSS) progression. For the NAWM, significant differences were found between 0 month and 6-12 months with EDSS≤2 (contrast, inverse difference moment), for 6-12 months for EDSS>2 and 0 month with EDSS>2 (difference entropy) and for 6-12 months for EDSS>2 and EDSS≤2 (sum average); (iv) there was no significant difference for NAWM and the lesion texture features (for both 0 and 6-12 months) for subjects with no change in EDSS score versus subjects with increased EDSS score from 2 to 5 years. CONCLUSIONS: The findings of this study provide evidence that texture features of T2 MRI brain white matter lesions may have an additional potential role in the clinical evaluation of MRI images in MS and perhaps may provide some prognostic evidence in relation to future disability of patients. However, a larger scale study is needed to establish the application in clinical practice and for computing shape and texture features that may provide information for better and earlier differentiation between normal brain tissue and MS lesions.

MEG localization of spike sources in human patients with brain tumors.

The purpose of this study was to use magnetoencephalography (MEG) to identify epileptic zones in patients with brain tumors before undergoing tumor surgery. The MEG data were recorded with a 122-channel biomagnetometer. Equivalent current dipoles (ECD) were calculated for epileptic spikes on MEG recordings according to the single dipole model. Eight patients (five males and three females) within the age range (43-73 years; mean ± SD = 55.12 ± 9.77) were examined by MEG before neurosurgery operation. Four patients had meningioma grade I, three had glioblastoma grade IV and one had astrocytoma grade II. All the patients showed ECD at their MEG's before surgical operation except a female one with meningioma who showed no ECD. Tumors observed in the frontal areas show posteriorly located ECD. We conclude that the MEG is a valuable clinical tool for the localization of epileptic foci in patients with brain tumors before surgical tumor operation.

A study on the age dependency of gustatory states: low-frequency spectral component in the resting-state MEG.

Magnetoencephalography (MEG) recordings were evaluated for 25 healthy female volunteers, in five different gustatory states: normal, sweet, bitter, sour and salty. The study population was divided in two groups according to age: group A (10-19 years old) and group B (20-30 years old). There was a higher count of low frequencies (2 Hz) and a lower count of high frequencies (7 Hz) with increasing age, in all studied states. We compared each state for the frequencies of 2 Hz and 7 Hz between the two groups. Statistically significant differences were found in the normal and sweet states for the frequencies of 2 Hz and 7 Hz and in the salty taste in the frequency of 7 Hz. We also intra-compared the five states in group A and the five states in group B for the 2 Hz and 7 Hz frequencies. The results were not statistically significant. A differentiation in the distribution of the frequencies with increasing age may provide new insights into the age-dependence of taste quality brain centers.

Coincidence summing corrections using PENELOPE/PENNUC Monte Carlo code for volume sources of different densities.

This work aims at providing a Monte-Carlo based methodology for calculating true coincidence correction (TCC) factors for volume sources of varying density. All simulations were carried out using the most recent version of Monte Carlo code PENELOPE. The main program PENMAIN was used for the calculation of full energy peak efficiencies. The subroutine PENNUC was utilized for the same calculation while taking summation effects into account. It was applied to Eu-152 and Cs-134 volume sources of 9 different densities, whilst the effect of the source's density on the TCC factor was investigated. There are differences between current results and the ones calculated by the TrueCoinc software. A relative bias up to 15% was observed, while the mean relative bias was 4.5%. The different approaches between the two codes could explain these deviations.

Risk assessment for the optimization of the grid of a telemetric network monitoring system.

The goal of this work was to develop a methodology for risk assessment in case of an accident originating from a nuclear power plant, and consequently, to improve the relevant radiation monitoring network. In specific, the study involved risk estimation in Greece from a transboundary nuclear power plant accident. The tool employed was JRODOS (Java-based Real-time Decision Support), which is a system for off-site emergency management of radioactive material in the environment. This tool, widely used to generate and study scenarios for nuclear accidents worldwide, provides valuable insight to facilitate emergency preparedness and response. The probability of the plume arriving at numerous regions within the country was calculated, along with the maximum dose rates in case of transport. A risk assessment was performed, and geographical regions were prioritized in terms of risk-based environmental radioactivity burden. A total of 29 administrative districts were identified as low to medium-risk regions. Acquired results were used to determine the optimal spatial distribution of detectors for upgrading the existing monitoring network of environmental radioactivity.

Biochemical differentiation between cancerous and normal human colorectal tissues by micro-Raman spectroscopy.

Human colorectal tissues obtained by ten cancer patients have been examined by multiple micro-Raman spectroscopic measurements in the 500-3200 cm-1 range under 785 nm excitation. Distinct spectral profiles are recorded from different spots on the samples: a predominant 'typical' profile of colorectal tissue, as well as those from tissue topologies with high lipid, blood or collagen content. Principal component analysis identified several Raman bands of amino acids, proteins and lipids which allow the efficient discrimination of normal from cancer tissues, the first presenting plurality of Raman spectral profiles while the last showing off quite uniform spectroscopic characteristics. Tree-based machine learning experiment was further applied on all data as well as on filtered data keeping only those spectra which characterize the largely inseparable data clusters of 'typical' and 'collagen-rich' spectra. This purposive sampling evidences statistically the most significant spectroscopic features regarding the correct identification of cancer tissues and allows matching spectroscopic results with the biochemical changes induced in the malignant tissues.

On the output factor measurements of the CyberKnife iris collimator small fields: Experimental determination of the k(Q(clin),Q(msr) ) (f(clin),f(msr) ) correction factors for microchamber and diode detectors.

PURPOSE: To measure the output factors (OFs) of the small fields formed by the variable aperture collimator system (iris) of a CyberKnife (CK) robotic radiosurgery system, and determine the k(Q(clin),Q(msr) ) (f(clin),f(msr) ) correction factors for a microchamber and four diode detectors. METHODS: OF measurements were performed using a PTW PinPoint 31014 microchamber, four diode detectors (PTW-60017, -60012, -60008, and the SunNuclear EDGE detector), TLD-100 microcubes, alanine dosimeters, EBT films, and polymer gels for the 5 mm, 7.5 mm, 10 mm, 12.5 mm, and 15 mm iris collimators at 650 mm, 800 mm, and 1000 mm source to detector distance (SDD). The alanine OF measurements were corrected for volume averaging effects using the 3D dose distributions registered in polymer gel dosimeters. k(Q(clin),Q(msr) ) (f(clin),f(msr) ) correction factors for the PinPoint microchamber and the diode dosimeters were calculated through comparison against corresponding polymer gel, EBT, alanine, and TLD results. RESULTS: Experimental OF results are presented for the array of dosimetric systems used. The PinPoint microchamber was found to underestimate small field OFs, and a k(Q(clin),Q(msr) ) (f(clin),f(msr) ) correction factor ranging from 1.127 ± 0.022 (for the 5 mm iris collimator) to 1.004 ± 0.010 (for the 15 mm iris collimator) was determined at the reference SDD of 800 mm. The PinPoint k(Q(clin),Q(msr) ) (f(clin),f(msr) ) correction factor was also found to increase with decreasing SDD; k(Q(clin),Q(msr) ) (f(clin),f(msr) ) values equal to 1.220 ± 0.028 and 1.077 ± 0.016 were obtained for the 5 mm iris collimator at 650 mm and 1000 mm SDD, respectively. On the contrary, diode detectors were found to overestimate small field OFs and a correction factor equal to 0.973 ± 0.006, 0.954 ± 0.006, 0.937 ± 0.007, and 0.964 ± 0.006 was measured for the PTW-60017, -60012, -60008 and the EDGE diode detectors, respectively, for the 5 mm iris collimator at 800 mm SDD. The corresponding correction factors for the 15 mm iris collimator were found equal to 0.997 ± 0.010, 0.994 ± 0.009, 0.988 ± 0.010, and 0.986 ± 0.010, respectively. No correlation of the diode k(Q(clin),Q(msr) ) (f(clin),f(msr) ) correction factors with SDD was observed. CONCLUSIONS: This work demonstrates an experimental procedure for the determination of the k(Q(clin),Q(msr) ) (f(clin),f(msr) ) correction factors required to obtain small field OF results of increased accuracy.

Dosimetric accuracy of a deterministic radiation transport based 192Ir brachytherapy treatment planning system. Part II: Monte Carlo and experimental verification of a multiple source dwell position plan employing a shielded applicator.

PURPOSE: The aim of this work is the dosimetric validation of a deterministic radiation transport based treatment planning system (BRACHYVISION v. 8.8, referred to as TPS in the following) for multiple 192Ir source dwell position brachytherapy applications employing a shielded applicator in homogeneous water geometries. METHODS: TPS calculations for an irradiation plan employing seven VS2000 192Ir high dose rate (HDR) source dwell positions and a partially shielded applicator (GM11004380) were compared to corresponding Monte Carlo (MC) simulation results, as well as experimental results obtained using the VIP polymer gel-magnetic resonance imaging three-dimensional dosimetry method with a custom made phantom. RESULTS: TPS and MC dose distributions were found in agreement which is mainly within +/- 2%. Considerable differences between TPS and MC results (greater than 2%) were observed at points in the penumbra of the shields (i.e., close to the edges of the "shielded" segment of the geometries). These differences were experimentally verified and therefore attributed to the TPS. Apart from these regions, experimental and TPS dose distributions were found in agreement within 2 mm distance to agreement and 5% dose difference criteria. As shown in this work, these results mark a significant improvement relative to dosimetry algorithms that disregard the presence of the shielded applicator since the use of the latter leads to dosimetry errors on the order of 20%-30% at the edge of the "unshielded" segment of the geometry and even 2%-6% at points corresponding to the potential location of the target volume in clinical applications using the applicator (points in the unshielded segment at short distances from the applicator). CONCLUSIONS: Results of this work attest the capability of the TPS to accurately account for the scatter conditions and the increased attenuation involved in HDR brachytherapy applications employing multiple source dwell positions and partially shielded applicators.

Determination of the R2* relaxation rate constant for estimating hepatic iron concentration: A customized approach that considers liver fat infiltration.

PURPOSE: Α customized approach to determine R2* relaxation rate for hepatic iron concentration (HIC) estimation is presented, and is evaluated in the context of concurrent liver fat infiltration. METHODS: The proposed method employs a customized acquisition protocol, featuring a 16-echo, gradient-echo sequence, and a bi-exponential least squares fitting that considers baseline noise and uses a cosine function to correct for fat-induced signal oscillation. 193 patients with wide-ranging HIC and liver fat fraction (FF) were imaged at 1.5 T. In severely iron-overload patients, a four-echo train technique was applied to enforce all 16 echoes in the 1.2-4.0 ms range. Acquired data were compared to corresponding results obtained with the IDEAL IQ method. RESULTS: Techniques employed to counter the rapid signal decay in iron-overloaded liver, such as the offset and the truncation methods, have to be combined with the appropriate calibration curve to provide reliable HIC estimation. When high grade steatosis and siderosis co-exist, fat-suppression may downgrade siderosis. A high correlation was observed between data obtained with the proposed technique and the IDEAL IQ method, except from the high R2* region. However, systematic differences were detected. In the concurrent presence of high FF and non-severe iron overload, it is postulated that the bi-exponential model may attribute patient siderosis grading more accurately than IDEAL IQ, while simultaneously providing reliable FF estimation. CONCLUSIONS: The proposed approach is widely available and seems capable of providing reliable R2* measurements regardless of liver steatosis grading, whilst it succeeds in averting significant R2* underestimation in severely iron-overloaded liver.

RADIATION DOSES TO THE EYE LENS AND FOREHEAD OF INTERVENTIONAL RADIOLOGISTS: HOW HIGH AND ON WHAT GROUNDS?

The aim of the study was to measure and evaluate the radiation dose to the eye lens and forehead of interventional radiologists (IRs). The study included 96 procedures (lower-limb percutaneous transluminal angioplasties, embolisations/chemoembolisations and vertebroplasties) performed by 6 IRs. A set of seven thermoluminescence dosemeters was allocated to each physician. The highest dose per procedure was found for the left eye lens of the primary operator in vertebroplasties (1576 µSv). Left and right eye doses were linearly correlated to left and right forehead doses, respectively. A workload-based estimation of the annual dose to participating IRs revealed that the occupational dose limit for the eye lens can be easily exceeded. The left eye dose of ΙRs must be routinely monitored on a personalised basis. Τhe left eye dose measurement provides a reliable assessment of the ipsilateral forehead dose, along with valid estimations for the right eye and right forehead doses.

Gamma knife output factor measurements using VIP polymer gel dosimetry.

PURPOSE: Water equivalent polymer gel dosimeters and magnetic resonance imaging were employed to measure the output factors of the two smallest treatment fields available in a Gamma Knife model C radiosurgery unit, those formed employing the 4 and 8 mm final collimator helmets. METHODS: Three samples of the VIP normoxic gel formulation were prepared and irradiated so that a single shot of the field whose output factor is to be measured and a single shot of the reference 18 mm field were delivered in each one. Emphasis is given to the development and benchmarking of a refined data processing methodology of reduced uncertainty that fully exploits the 3D dose distributions registered in the dosimeters. RESULTS: Polymer gel results for the output factor of the 8 mm collimator helmet are found to be in close agreement with the corresponding value recommended by the vendor (0.955 +/- 0.007 versus 0.956, respectively). For the 4 mm collimator helmet, however, polymer gel results suggest an output factor 3% lower than the value recommended by the vendor (0.841 +/- 0.009 versus 0.870, respectively). CONCLUSIONS: A comparison with corresponding measurements published in the literature indicates that output factor results of this work are in agreement with those obtained using dosimetric systems which, besides fine spatial resolution and lack of angular and dose rate dependence of the dosimeter's response, share with polymer gels the favorable characteristic of minimal radiation field perturbation.

Reduction of the estimated radiation dose and associated patient risk with prospective ECG-gated 256-slice CT coronary angiography.

Computed tomography (CT) coronary angiography has been widely used since the introduction of 64-slice scanners and dual-source CT technology, but high radiation doses have been reported. Prospective ECG-gating using a 'step-and-shoot' axial scanning protocol has been shown to reduce radiation exposure effectively while maintaining diagnostic accuracy. 256-slice scanners with 80 mm detector coverage have been currently introduced into practice, but their impact on radiation exposure has not been adequately studied. The aim of this study was to assess radiation doses associated with CT coronary angiography using a 256-slice CT scanner. Radiation doses were estimated for 25 patients scanned with either prospective or retrospective ECG-gating. Image quality was assessed objectively in terms of mean CT attenuation at selected regions of interest on axial coronary images and subjectively by coronary segment quality scoring. It was found that radiation doses associated with prospective ECG-gating were significantly lower than retrospective ECG-gating (3.2 +/- 0.6 mSv versus 13.4 +/- 2.7 mSv). Consequently, the radiogenic fatal cancer risk for the patient is much lower with prospective gating (0.0176% versus 0.0737%). No statistically significant differences in image quality were observed between the two scanning protocols for both objective and subjective quality assessments. Therefore, prospective ECG-gating using a 'step-and-shoot' protocol that covers the cardiac anatomy in two axial acquisitions effectively reduces radiation doses in 256-slice CT coronary angiography without compromising image quality.

Dosimetric performance of the Elekta Unity MR-linac system: 2D and 3D dosimetry in anthropomorphic inhomogeneous geometry.

Following the clinical introduction of the Elekta Unity MR-linac, there is an urgent need for development of dosimetry protocols and tools, not affected by the presence of a magnetic field. This work presents a benchmarking methodology comprising 2D/3D passive dosimetry and involving on-couch adaptive treatment planning, a unique step in MR-linac workflows. Two identical commercially available 3D-printed head phantoms (featuring realistic bone anatomy and MR/CT contrast) were employed. One phantom incorporated a film dosimetry insert, while the second was filled with polymer gel. Gel dose-response characteristics were evaluated under the Unity irradiation and read-out conditions, using vials and a cubic container filled with gel from the same batch. Treatment plan for the head phantoms involved a hypothetical large C-shape brain lesion, partly surrounding the brainstem. An IMRT step-and-shoot 7-beam plan was employed. Pre-treatment on-couch MR-images were acquired in order for the treatment planning system to calculate the virtual couch shifts and perform adaptive planning. Absolute 2D and relative 3D measurements were compared against calculations related to both adapted and original plans. Real-time dose accumulation monitoring in the gel-filled phantom was also performed. Results from the vials and cubic container suggest that gel dose-response is linear in the dose range investigated and signal integrity is mature at the read-out timings considered. Head phantom 2D and 3D measurements agreed well with calculations with 3D gamma index passing rates above 90% in all cases, even with the most stringent criteria used (2 mm/2%). By exploiting the 3D information provided by the gel, comparison also involved DVHs, dose-volume and plan quality metrics, which also reflected the agreement between adapted and delivered plans within ±4%. No considerable discrepancies were detected between adapted and original plans. A novel methodology was developed and implemented, suitable for QA procedures in Unity. TPS calculations were validated within the experimental uncertainties involved.

Dosimetric characterization of CyberKnife radiosurgical photon beams using polymer gels.

Dose distributions registered in water equivalent, polymer gel dosimeters were used to measure the output factors and off-axis profiles of the radiosurgical photon beams employed for CyberKnife radiosurgery. Corresponding measurements were also performed using a shielded silicon diode commonly employed for CyberKnife commissioning, the PinPoint ion chamber, and Gafchromic EBT films, for reasons of comparison. Polymer gel results of this work for the output factors of the 5, 7.5, and 10 mm diameter beams are (0.702 +/- 0.029), (0.872 +/- 0.039), and (0.929 +/- 0.041), respectively. Comparison of polymer gel and diode measurements shows that the latter overestimate output factors of the two small beams (5% for the 5 mm beam and 3% for the 7.5 mm beams). This is attributed to the nonwater equivalence of the high atomic number silicon material of the diode detector. On the other hand, the PinPoint chamber is found to underestimate output factors up to 10% for the 5 mm beam due to volume averaging effects. Polymer gel and EBT film output factor results are found in close agreement for all beam sizes, emphasizing the importance of water equivalence and fine detector sensitive volume for small field dosimetry. Relative off-axis profile results are in good agreement for all dosimeters used in this work, with noticeable differences observed only in the PinPoint estimate of the 80%-20% penumbra width, which is relatively overestimated.

Polymer gel dosimetry for the TG-43 dosimetric characterization of a new 125I interstitial brachytherapy seed.

In this work, a polymer gel-magnetic resonance (MR) imaging method is employed for the dosimetric characterization of a new 125I low dose rate seed (IsoSeed model I25.S17). Two vials filled with PABIG gel were prepared in-house and one new seed as well as one commercially available 125I seed of similar dose rate and well-known dosimetric parameters (IsoSeed model I25.S06) were positioned in each vial. Both seeds in each vial were MR scanned simultaneously on days 11 and 26 after implantation. The data obtained from the known seed in each vial are used to calibrate the gel dose response which, for the prolonged irradiation duration necessitated by the investigated dose rates, depends on the overall irradiation time. Data for this study are presented according to the AAPM TG-43 dosimetric formalism. Polymer gel results concerning the new seed are compared to corresponding, published dosimetric results obtained, for the purpose of the new seed clinical implementation, by our group using the established methods of Monte Carlo (MC) simulation and thermo-luminescence dosimetry (TLD). Polymer gel dosimetry yields an average dose rate constant value of lambda = (0.921 +/- 0.031) cGy h(-1) U(-1) relative to (MC)lambda = (0.929 +/- 0.014) cGy h(-1) U(-1), (TLD)lambda = (0.951 +/- 0.044) cGy h(-1) U(-1) and the average value of Lambda = (0.940 +/- 0.051) cGy h(-1) U(-1) proposed for the clinical implementation of the new seed. Results for radial dose function, g(L)(r), and anisotropy function, F(r, theta), also agree with corresponding MC calculations within experimental uncertainties which are smaller for the polymer gel method compared to TLD. It is concluded that the proposed polymer gel-magnetic resonance imaging methodology could be used at least as a supplement to the established techniques for the dosimetric characterization of new low energy and low dose rate interstitial brachytherapy seeds.

Characterization of system-related geometric distortions in MR images employed in Gamma Knife radiosurgery applications.

This work provides characterization of system-related geometric distortions present in MRIs used in Gamma Knife (GK) stereotactic radiosurgery (SRS) treatment planning. A custom-made phantom, compatible with the Leksell stereotactic frame model G and encompassing 947 control points (CPs), was utilized. MR images were obtained with and without the frame, thus allowing discrimination of frame-induced distortions. In the absence of the frame and following compensation for field inhomogeneities, measured average CP disposition owing to gradient nonlinearities was 0.53 mm. In presence of the frame, contrarily, detected distortion was greatly increased (up to about 5 mm) in the vicinity of the frame base due to eddy currents induced in the closed loop of its aluminum material. Frame-related distortion was obliterated at approximately 90 mm from the frame base. Although the region with the maximum observed distortion may not lie within the GK treatable volume, the presence of the frame results in distortion of the order of 1.5 mm at a 7 cm distance from the center of the Leksell space. Additionally, severe distortions observed outside the treatable volume could possibly impinge on the delivery accuracy mainly by adversely affecting the registration process (e.g. the position of the lower part of the N-shaped fiducials used to define the stereotactic space may be miss-registered). Images acquired with a modified version of the frame developed by replacing its front side with an acrylic bar, thus interrupting the closed aluminum loop and reducing the induced eddy currents, were shown to benefit from relatively reduced distortion. System-related distortion was also identified in patient MR images. Using corresponding CT angiography images as a reference, an offset of 1.1 mm was detected for two vessels lying in close proximity to the frame base, while excellent spatial agreement was observed for a vessel far apart from the frame base.

An evaluation of the TSE MR sequence for time efficient data acquisition in polymer gel dosimetry of applications involving high doses and steep dose gradients.

The use of magnetic resonance imaging as a readout method for polymer gel dosimetry commonly involves long imaging sessions, particularly when high spatial resolution is required in all three dimensions, for the investigation of dose distributions with steep dose gradients and stringent dose delivery specifications. In this work, a volume selective turbo spin echo (TSE) pulse sequence is compared to the established Carr-Purcell-Meiboom-Gill (CPMG) multiecho acquisition with regard to providing accurate dosimetric results in significantly reduced imaging times. Polyethylene glycol diacrylate based (PABIG) gels were irradiated and subsequently scanned to obtain R2 relaxation rate measurements, using a CPMG multiecho sequence and a dual echo TSE utilizing an acceleration (turbo) factor of 64. R2 values, plotted against corresponding Monte Carlo dose calculations, provided calibration data of PABIG gels dose response over a wide dose range. A linear R2 versus dose relationship was demonstrated for both sequences with TSE results presenting reduced dose sensitivity. Although TSE data were found to deviate from linearity at lower doses compared to CPMG data, a relatively wide dynamic dose range of response extending up to approximately 100 Gy was observed for both sequences. The TSE and CPMG sequences were evaluated with a brachytherapy irradiation using a high dose rate 192Ir source and a gamma knife stereotactic radiosurgery irradiation with a single 4 mm collimator helmet shot. Dosimetric results obtained with the TSE and CPMG are shown to compare equally well with the expected dose distributions for these irradiations. The 60-fold scan time reduction achieved with TSE implies that this sequence could prove to be a useful tool for the introduction of polymer gel dosimetry in clinical radiation therapy applications involving high doses and steep dose gradients.