Layered double hydroxide intercalated with tyrosine for ultrasonic-assisted microextraction of tramadol and methadone from biological samples followed by GC/MS analysis.

A magnetic nanocomposite adsorbent based on Zn-Al layered double hydroxide (LDH) intercalated with tyrosine has been synthesized for ultrasound-assisted extraction of two drugs of abuse: tramadol (TRA) and methadone (MET). Analysis was carried out using gas chromatography-mass spectrometry. The synthesized LDH was characterized by Fourier transform-infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The most important extraction parameters such as type of the elution solvent, pH value of the sample solution, and the amount of the adsorbent were optimized. With assistance of ultrasound radiation, the maximum extraction of target drugs using the fabricated LDH was achieved within 5 min. Under the optimized conditions, the limits of determination were 0.45, 0.45, 2.5, and 0.8 µg L-1 for TRA and 0.15, 0.15, 1.2, and 0.5 µg L-1 for MET in water, urine, plasma, and saliva samples, respectively. The preconcentration factors obtained were in the range of 50-145. The matrix effect for MET and TRA is considerable in plasma (66%, 18%) and saliva (72%, 34%), respectively. The precision was found to be better 11% RSD. The maximum adsorption capacity is 4.84 (mg g-1) (L mg-1)1/n based on the Freundlich isotherm. The proposed method presents good results for trace determination of tramadol and methadone in biological samples with satisfactory repeatability. Graphical abstract.

Flotation/ultrasound-assisted microextraction followed by HPLC for determination of fat-soluble vitamins in multivitamin pharmaceutical preparations.

Dissolved carbon dioxide flotation-emulsification microextraction technique coupled with high-performance liquid chromatography was developed for separation and determination of fat-soluble vitamins (A, D3 , E, and K3 ) in multivitamin pharmaceutical preparations. Dissolved carbon dioxide flotation was used to break up the emulsion of extraction solvent in water and to collect the extraction solvent on the surface of aqueous sample in narrowed capillary part of extraction cell. Carbon dioxide bubbles were generated in situ through the addition of 300 µL of concentrated hydrochloric acid into the alkaline sample solution at pH = 11.5 (1% w/v sodium carbonate), which was sonicated to intensify the carbon dioxide bubble generation. Several factors affecting the extraction process were optimized. Under the optimal conditions, the limits of detection were 0.11, 0.47, 0.20 and 0.35 µg/L for A, E, D3 , and K3 vitamins in water samples, respectively. The inter-day and intra-day precision of the proposed method were evaluated in terms of the relative standard deviation and were <10.5%.

Trace determination of lead, chromium and cadmium in herbal medicines using ultrasound-assisted emulsification microextraction combined with graphite furnace atomic absorption spectrometry.

INTRODUCTION: The World Health Organization (WHO) recommends that medicinal plants should be checked for the presence of heavy metals. A preconcentration and separation technique for trace amounts of heavy metals from plant matrix is necessary in order to increase the sensitivity and precision of their determination. OBJECTIVE: Lead, chromium and cadmium contaminations in herbal medicines were monitored using ultrasound-assisted emulsification microextraction (USAEME) combined with graphite furnace atomic absorption spectrometry (GF-AAS). METHODS: In this work, the metal ions in the aqueous solution were complexed with ammonium pyrrolidine dithiocarbamate (APDC) and were extracted into 45 µL of toluene that was sonically dispersed in the aqueous phase. The emulsion formed was centrifuged and 20 µL of separated toluene was injected into a GF-AAS for analysis. Several factors including the kind of extraction solvent and its volume, sample pH, ionic strength and concentration of APDC were optimised. RESULTS: The linear dynamic range (LDR) values were in the range of 0.05 to 20 µg/L and the limit of detection values were in the range of 0.002-0.03 µg/L for target heavy metals. Enrichment factors were obtained in the range of 70-500. The precision of the proposed method was ≤ 8% (n = 5). The obtained amounts of Pb, Cr and Cd in selected herbal medicines were in the standard range, according to the WHO reports. CONCLUSION: The USAEME with GF-AAS procedure was shown to be an efficient, rapid, inexpensive and eco-friendly method for the determination of lead, chromium and cadmium in herbal medicines. Application of the USAEME method leads to an increased extraction efficiency with satisfactory precision in a short time using an extraction solvent volume at the microlitre level.

Modeling studies on the role of vitamins B1 (thiamin), B3 (nicotinamide), B6 (pyridoxamine), and caffeine as potential leads for the drug design against COVID-19.

In response to the COVID-19 pandemic, and the lack of effective and safe antivirals against it, we adopted a new approach in which food supplements with vital antiviral characteristics, low toxicity, and fast excretion have been targeted. The structures and chemical properties of the food supplements were compared to the promising antivirals against SARS-COV-2. Our goal was to exploit the food supplements to mimic the topical antivirals' functions but circumventing their severe side effects, which has limited the necessary dosage needed to exhibit the desired antiviral activity. On this line, after a comparative structural analysis of the chemicals mentioned above, and investigation of their potential mechanisms of action, we selected caffeine and some compounds of the vitamin B family and further applied molecular modeling techniques to evaluate their interactions with the RDB domain of the Spike protein of SARS-CoV-2 (SC2Spike) and its corresponding binding site on human ACE-2 (HssACE2). Our results pointed to vitamins B1 and B6 in the neutral form as potential binders to the HssACE2 RDB binding pocket that might be able to impair the SARS-CoV-2 mechanism of cell invasion, qualifying as potential leads for experimental investigation against COVID-19.

Spectrophotometric study of the charge-transfer and ion-pair complexation of methamphetamine with some acceptors.

The charge-transfer (CT) complexes of methamphetamine (MPA) as a n-donor with several acceptors including bromocresolgreen (BCG), bromocresolpurple (BCP), chlorophenolred (CPR), picric acid (PIC), and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) have been studied spectrophotometrically in chloroform solutions in order to obtain some information about their stoichiometry and stability of complexation. The oscillator strengths, transition dipole moments and resonance energy of the complex in the ground state for all complexes have been calculated. Vertical ionization potential of MPA and electron affinity of acceptors were determined by ab initio calculation. The acceptors were also used to utilize a simple and sensitive extraction-spectrophotometric method for the determination of MPA. The method is based on the formation of 1:1 ion-pair association complexes of MPA with BCG, BCP and PIC in chloroform medium. Beer's plots were obeyed in a general concentration range of 0.24-22 microg ml(-1) for the investigated drug with different acceptors. The proposed methods were applied successfully for the determination of MAP in pure and abuse drug with good accuracy and precision.

Determination of valproic acid in human serum and pharmaceutical preparations by headspace liquid-phase microextraction gas chromatography-flame ionization detection without prior derivatization.

An efficient and fast extraction technique for the enrichment of valproic acid from human blood serum samples using the headspace liquid phase microextraction (HS-LPME) combined with gas chromatography (GC) analysis has been developed. The extraction was conducted by suspending a 2 microL drop of organic solvent in a 1 mL serum sample; following 20 min of extraction, withdrawing organic solvent into a syringe and injection into a GC with a flame ionization detector (FID), without any further pre-treatment. Four organic solvents, 1-decanole, benzyl alcohol, 1-octanol and n-dodecane, were studied as extractants, and n-dodecane was found to be the most sensitive solvent for valproic acid. The results revealed that HS-LPME is suitable for the successful extraction of valproic acid from human blood serum samples. Parameters like extraction time, ionic strength, pH, organic solvent volume, and temperature of the sample were studied and optimized to obtain the best extraction results. An enrichment factor of 27-fold was achieved in 20 min. The procedure resulted in a relative standard deviation of <13.2% (n=7) and a linear calibration range from 2 to 20 microg mL(-1) (r>0.98), and the limit of detection was 0.8 microg mL(-1) in serum blank samples. Overall, LPME proved to be a fast, sensitive and simple tool for the preconcentration of valproic acid from real samples. The proposed method was also applied to the analysis of valproate in pharmaceutical preparations.

Headspace-solid phase microextraction of selenium(IV) from human blood and water samples using polypyrrole film and analysis with ion mobility spectrometry.

Headspace-solid phase microextraction (HS-SPME) with a polypyrrole (PPy)-coated fiber was applied as a sample preparation method for determination of selenite [Se(IV)] following derivatization with 1,2-diaminobenzene to convert into the piaselenol form and analysis by ion mobility spectrometry (IMS). The HS-SPME-IMS method presents good repeatability (RSDs <6%), simplicity, good sensitivity and short analysis times. The influence of the various analytical parameters on microextraction procedure, i.e. ligand concentration, pH, ionic strength, equilibrium time and temperature has been evaluated and optimized. The calibration graph was linear in the range of 20-320 ng mL(-1) with a detection limit of 12 ng mL(-1). The method was applied for determination of selenium in human serum and environmental surface water samples with satisfactory recovery.