Transformations induced in bulk amorphous silica by ultrafast laser direct writing.

A transmission electron microscopy study of nanogratings formed in bulk amorphous silica by direct writing with an ultrafast pulsed laser with a radiation wavelength of 1030 nm and pulse duration of 560 fs is presented. The results achieved show that the nanogratings are composed of planar nanostructures with an average periodicity of 250 nm and typical thickness of about 30 nm, consisting of alternating layers of heavily damaged material and layers of material where a dense precipitation of nanocrystals occurred. The crystallization of silica to form these nanocrystals can be explained by the large pressures and temperatures reached in these regions as a result of nanoplasma formation and recombination.

Growth of CNTs on Fe-Si catalyst prepared on Si and Al coated Si substrates.

In this paper we report the effect of Al interlayers on the growth characteristics of carbon nanotubes (CNTs) using as-deposited and plasma etched Fe-Si catalyst films as the catalysts. Al interlayers having various thicknesses ranging from 2 to 42 nm were deposited on Si substrates prior to the deposition of Fe-Si catalysts. It was found that the Al interlayer diffuses into the Fe-Si catalyst during the plasma etching prior to the CNT growth, leading to the swelling and amorphization of the catalyst. This allows enhanced carbon diffusion in the catalyst and therefore a faster growth rate of the resulting CNTs. It was also found that use of an Al interlayer having a thickness of ∼3 ± 1 nm is most effective. Due to the effectiveness of this, the normally required catalyst etching is no longer needed for the growth of CNTs.