Synthesis of iron-manganese bimetallic materials supported by activated carbon and application of activated persulfate in the degradation of soil contaminated by crude oil.

Heterogeneous catalytic processes based on zero-valent iron (ZVI) have been developed to treat soil and wastewater pollutants. However, the agglomeration of ZVI reduces its ability to activate persulfate (PS). In this study, a new Fe-Mn@AC activated material was prepared to activated PS to treat oil-contaminated soil, and using the microscopic characterization of Fe-Mn@AC materials, the electron transfer mode during the Fe-Mn@AC activation of PS was clarified. Firstly, the petroluem degradation rate was optimized. When the PS addition amount was 8%, Fe-Mn@AC addition amount was 3% and the water to soil ratio was 3:1, the petroluem degradation rate in the soil reached to the maximum of 85.69% after 96 h of reaction. Then it was illustrated that sulfate and hydroxyl radicals played major roles in crude oil degradation, while singlet oxygen contributed slightly. Finally, the indigenous microbial community structures remaining after restoring the Fe-Mn@AC/PS systems were analyzed. The proportion of petroleum degrading bacteria in soil increased by 23% after oxidation by Fe-Mn@AC/PS system. Similarly, the germination rate of wheat seeds revealed that soil toxicity was greatly reduced after applying the Fe-Mn@AC/PS system. After the treatment with Fe-Mn@AC/PS system, the germination rate, root length and bud length of wheat seed were increased by 54.05%, 7.98 mm and 6.84 mm, respectively, compared with the polluted soil group. These results showed that the advanced oxidation system of Fe-Mn@AC activates PS and can be used in crude oil-contaminated soil remediation.

The collaborative monitored natural attenuation (CMNA) of soil and groundwater pollution in large petrochemical enterprises: A case study.

A large in-service petrochemical enterprises in Northeast China was taken as the research object, and the Collaborative Monitored Natural Attenuation (CMNA) for soil and groundwater pollution was carried out to remedy combined pollution and reduce environmental risks. The pollutants distributions were obtained based on detailed regional investigation (Mar. 2019), and feature pollutants in soil and groundwater were then screened. The spatiotemporal variations of feature pollutants and relative microbial responses were explored during the CMNA process. Furthermore, the CMNA efficiency of the contaminated site at initial stage was evaluated by calculation of natural attenuation rate constant. The results showed that the feature pollutants in soil were 2,2',5,5'-tetrachlorobiphenyl (2,2',5,5'-TCB) and petroleum hydrocarbons (C10∼C40), and the feature pollutant in groundwater was 1,2-dichloroethane (1,2-DCA). The concentrations of all feature pollutants decreased continuously during four years of monitoring. Feature pollutants played a dominant role in the variability of microbial species both in soil and groundwater, increasing the relative abundance of petroleum tolerant/biodegradation bacteria, such as Actinobacteria, Proteobacteria and Acidobacteriota. The average natural attenuation rate constant of 2,2',5,5'-TCB and C10∼C40 in soil was 0.0012 d-1 and 0.0010 d-1, respectively, meeting the screening value after four years' attenuation. The average natural attenuation rate constant of 1,2-DCA was 0.0004 d-1, which need strengthening measures to improve the attenuation efficiency.

Transmembrane transport mechanism of n-hexadecane by Candida tropicalis: Kinetic study and proteomic analysis.

Yeasts are the most predominant petroleum hydrocarbon-degrading fungi isolated from petroleum-contaminated soil. However, information of the transmembrane transport of petroleum hydrocarbon into yeast cells is limited. The present study was designed to explore the transmembrane transport mechanisms of the typical petroleum hydrocarbon n-hexadecane in Candida tropicalis cells with petroleum hydrocarbon biodegradation potential. Yeast cells were treated with n-hexadecane in different scenarios, and the percentage of intracellular n-hexadecane and transport dynamics were investigated accordingly. The intracellular concentration of n-hexadecane increased within 15 min, and transportation was inhibited by NaN3, an ATPase inhibitor. The uptake kinetics of n-hexadecane were well fitted by the Michaelis-Menten model, and Kt values ranged from 152.49 to 194.93 mg/L. All these findings indicated that n-hexadecane might cross the yeast cells in an energy-dependent manner and exhibit an affinity with the cell transport system. Moreover, the differentially expressed membrane proteins induced by n-hexadecane were identified and quantified by tandem mass tag labeling coupled with liquid chromatography tandem mass spectrometry analysis. The proteome analysis results demonstrated that energy production and conversion accounted for a large proportion of the functional classifications of the differentially expressed proteins, providing further evidence that sufficient energy supply is essential for transmembrane transport. Protein functional analysis also suggested that differentially expressed proteins associated with transmembrane transport processes are clearly enriched in endocytosis and phagosome pathways (p < 0.05), and the analysis supported the notion that the underlying transmembrane transport mechanism might be associated with endocytosis and phagosome pathways, revealing a new mechanism of n-hexadecane internalization by Candida tropicalis.

Three-dimensional hydrogen distribution and quantitative determination of titanium alloys via neutron tomography.

Thermohydrogen processing (THP) is an attractive technique that uses hydrogen as a temporary alloying element to modify the microstructure and properties of titanium alloys. However, the hydrogen diffusion behavior during THP is not fully understood owing to limited scope of methods to detect hydrogen distributions. Herein, we introduce neutron tomography as an efficient tool for three-dimensional (3D) hydrogen distribution analysis and quantitative determination in hydrogenated titanium alloys after THP. Thus motivated, a series of calibration samples of Ti-6Al-4V alloys with varying hydrogen contents were prepared and elaborated neutron tomography experiments and image data processing were performed. In this way, the 3D hydrogen distribution of the hydrogenated samples was obtained and the quantitative relationship between the hydrogen contents and the tomographic images was determined. To the best of our knowledge, this enabled for the first time the direct 3D visualization and characterization of the hydrogen distribution and concentration in titanium alloys after THP. It was deduced that hydrogen diffused from the surface to the interior of the hydrogenated sample in all directions during THP. In addition, the feasibility of neutron tomography for 3D quantitative hydrogen distribution was validated using continuous sample segmentation and the traditional heat conductivity method. Consequently, neutron tomography can be efficient for determining the hydrogen distribution and concentration in bulk metals and shed light on the hydrogen diffusion behavior and the mechanism of hydrogen-related materials and processing.

DNA Three-Way Junction for Differentiation of Single-Nucleotide Polymorphisms with Fluorescent Copper Nanoparticles.

A label- and enzyme-free fluorescent sensor for the detection of single-nucleotide polymorphisms (SNPs) at room temperature is proposed, using new copper nanoparticles (CuNPs) as fluorescent reporters. The CuNPs were constructed by using a DNA three-way junction (3WJ) template. In this assay, two complementary adenine/thymine-rich probes can hybridize with the wild-type target simultaneously to construct a 3WJ structure, serving as an efficient scaffold for the generation of CuNPs. However, the CuNPs produce weak fluorescence when the probes bind with a mutant-type target. SNPs can be identified by the difference in fluorescence intensity of the CuNPs. This SNPs detection strategy is straightforward, cost-effective, and avoids the complicated procedures of labeling or enzymatic reactions. The fluorescent sensor is versatile and can be applied to all types of mutation because the probes are programmable. Moreover, the sensor exhibits good detection performance in biological samples.

Near-Infrared-Fluorescent Probes for Bioapplications Based on Silica-Coated Gold Nanobipyramids with Distance-Dependent Plasmon-Enhanced Fluorescence.

Optical antennas with anisotropic metal nanostructures are widely used in the field of fluorescence enhancement based on localized surface plasmons (LSPs). They overcome the intrinsic defects of low brightness of near-infrared (NIR) dyes and can be used to develop sensitive NIR sensors for bioapplications. Here, we demonstrate a novel NIR plasmon-enhanced fluorescence (PEF) system consisting of elongated gold nanobipyramids (Au NBPs) antennas, silica, and NIR dyes. Silica was chosen as the rigid spacer to regulate the distance between the metal nanostructures and dyes. Maximum enhancement was observed at a distance of approximately 17 nm. The enhanced fluorescence could be quenched by Cu2+ and recovered by pyrophosphate (PPi) owing to the strong affinity between PPi and Cu2+. Thus, the Au NBP@SiO2@Cy7 nanoparticles (NPs) detect PPi via "switch-on" fluorescence signals, with a detection limit of 80 nM in the aqueous phase. The probe not only detects PPi in living cells but also can be used for a microRNA assay with a detection limit of 8.4 pM by detecting PPi in rolling circle amplification (RCA). Additionally, gold nanorods (Au NRs) with the same longitudinal plasmon resonance wavelength (LPRW) as the Au NBPs were prepared to synthesize Au NR@SiO2@Cy7 NPs for comparison. The experimental and finite-different time-domain (FDTD) simulation results indicate that the stronger electric fields of Au NBPs contribute to a fluorescence enhancement that is several times higher than that of Au NRs, confirming the superior properties of Au NBPs as novel ideal substrates to develop PEF biosensors.

Sequence-dependent dsDNA-templated formation of fluorescent copper nanoparticles.

There are only a few systematic rules about how to selectively control the formation of DNA-templated metal nanoparticles (NPs) by varying sequence combinations of double-stranded DNA (dsDNA), although many attempts have been made. Herein, we develop a facile method for sequence-dependent formation of fluorescent CuNPs by using dsDNA as templates. Compared with random sequences, AT sequences are better templates for highly fluorescent CuNPs. Other specific sequences, for example, GC sequences, do not induce the formation of CuNPs. These results shed light on directed DNA metallization in a sequence-specific manner. Significantly, both the fluorescence intensity and the fluorescence lifetime of CuNPs can be tuned by the length or the sequence of dsDNA. In order to demonstrate the promising practicality of our findings, a sensitive and label-free fluorescence nuclease assay is proposed.

Comparison of Statistical Signal Detection Methods in Adverse Events Following Immunization - China, 2011-2015.

Introduction: The current study aims to assess the performance of data mining techniques in detecting safety signals for adverse events following immunization (AEFI) using routinely obtained data in China. Four different methods for detecting vaccine safety signals were evaluated. Methods: The AEFI data from 2011 to 2015 was collected for our study. We analyzed the data using four different methods to detect signals: the proportional reporting ratio (PRR), reporting odds ratio (ROR), Bayesian confidence propagation neural network (BCPNN), and multi-item gamma Poisson shrinker (MGPS). Each method was evaluated at 1-3 thresholds for positivity. To assess the performance of these methods, we used the published signal rates as gold standards to determine the sensitivity and specificity. Results: The number of identified signals varied from 602 for PRR1 (with a threshold of 1) to 127 for MGPS1. When considering the common reactions as the reference standard, the sensitivity ranged from 0.9% for MGPS1/2 to 38.2% for PRR1/2, and the specificity ranged from 85.2% for PRR1 and ROR1 to 96.7% for MGPS1. When considering the rare reactions as the reference standard, PRR1, PRR2, ROR1, ROR2, and BCPNN exhibited the highest sensitivity (73.3%), while MGPS1 exhibited the highest specificity (96.9%). Discussion: For common reactions, the sensitivities were modest and the specificities were high. For rare reactions, both the sensitivities and specificities were high. Our study provides valuable insights into the selection of signal detection methods and thresholds for AEFI data in China.

Impact of National Immunization Strategies on Vaccine-Preventable Diseases - China, 1950-2021.

What is already known about this topic?: The incidences of vaccine-preventable diseases (VPDs) included in the Expanded Program on Immunization in China have decreased significantly in recent decades. What is added by this report?: This study summarizes the national incidences of nine VPDs and the seroprevalence of hepatitis B surface antigen (HBsAg) under different immunization strategies from 1950 through 2021 in China. The sharpest decreases in VPD incidence and under-5-year HBsAg seroprevalence occurred during the latest stage of the National Immunization Program. The decreases in VPD incidence were most prominent among children under five years of age. What are the implications for public health practice?: These findings provide valuable insights for vaccine value assessment and emphasize the importance of implementing immunization strategies in targeted populations.

Thirty Years of Experience of Acute Flaccid Paralysis Surveillance for Polio - China, 1993-2022.

Introduction: Detecting poliovirus infections proves to be highly challenging due to their asymptomatic nature and infectious potential, highlighting the crucial importance of effective detection methods in the context of polio eradication efforts. In many countries, including China, the primary approach for identifying polio outbreaks has been through acute flaccid paralysis (AFP) surveillance. In this study, we conducted an evaluation spanning three decades (1993-2022) to assess the effectiveness of AFP surveillance in China. Methods: Data on all AFP cases identified since 1993 and national-level AFP surveillance system quality indicators aligned with the World Health Organization (WHO) standards were collected for analysis. The quality indicators assess surveillance sensitivity, completeness, timeliness of detection notification, case investigation, and laboratory workup. Surveillance sensitivity is determined by the non-polio AFP (NPAFP) detection rate among children under 15 years of age. Results: Between 1993 and 2022, a total of 150,779 AFP cases were identified and reported. Within this pool, surveillance identified 95 cases of wild poliovirus (WPV) and 24 cases due to vaccine-derived poliovirus. From 1995 onwards, the detection rate of NPAFP cases consistently adhered to the WHO and national standards of ≥1 case per 100,000, falling between 1.38 and 2.76. Starting in 1997, all timeliness indicators consistently achieved the criteria of 80%, apart from the consistency in meeting standards set for the rate of positive specimens sent to the national laboratory. Conclusions: AFP surveillance has been instrumental in China's accomplishment of maintaining a polio-free status. The ongoing adherence to key performance indicators, ensuring sensitivity and prompt specimen collection, demonstrates that AFP surveillance is proficient in detecting poliovirus in China. As we move into the post-eradication phase, AFP surveillance remains crucial for the sustained absence of polioviruses in the long term.

Research on Risk Assessment and Contamination Monitoring of Potential Toxic Elements in Mining Soils.

Potentially toxic element (PTE) contamination in soils has serious impacts on ecosystems. However, there is no consensus in the field of assessment and monitoring of contaminated sites in China. In this paper, a risk assessment and pollution monitoring method for PTEs was proposed and applied to a mining site containing As, Cd, Sb, Pb, Hg, Ni, Cr, V, Zn, Tl, and Cu. The comprehensive scoring method and analytical hierarchical process were used to screen the priority PTEs for monitoring. The potential ecological risk index method was used to calculate the risk index of monitoring point. The spatial distribution characteristics were determined using semi-variance analysis. The spatial distribution of PTEs was predicted using ordinary kriging (OK) and radial basis function (RBF). The results showed that the spatial distribution of As, Pd, and Cd are mainly influenced by natural factors, while Sb and RI are influenced by both natural and human factors. OK has higher spatial prediction accuracy for Sb and Pb, and RBF has higher prediction accuracy for As, Cd, and RI. The areas with high ecological risk and above are mainly distributed on both sides of the creek and road. The optimized long-term monitoring sites can achieve the monitoring of multiple PTEs.

Marine oil spill remediation by Candelilla wax modified coal fly ash cenospheres.

Biodegradable candelilla wax (CW) was creatively used for hydrophobic modification of coal fly ash cenospheres (FACs), a waste product from thermal power plants, and a new spherical hollow particulate adsorbent with fast oil adsorption rate and easy agglomeration was prepared. CW was confirmed to physically coat FACs and the optimum mass of wax added to 3 g of FACs was 0.05 g. From a series of batch scale experiments, CW-FACs were found to adsorb oil, reaching adsorption efficiency of 80.6% within 10 s, and aggregate into floating clumps which were easily removed from the water's surface. The oil adsorption efficiency was highly dependent on hydrophobicity of the used adsorbent, the adsorption of Venezuela oil onto CW-FACs was found to be a homogenous monolayer, and the capacity and intensity of the adsorption decreased as temperature increased from 10 to 40 °C. The Langmuir isotherm model was the best fit, with the maximum adsorption capacity achieved at 649.38 mg/g. CW-FACs were also found to be highly stable in concentrated acid, alkaline and salt solutions, as well as for spills of different oil products. Furthermore, the retention rate of the oil adsorption capacity of the CW-FACs after 6 cycles of adsorption-extraction was as high as 93.2%. Therefore, CW-FACs can be widely used, easily recycled, and reused for marine oil spill remediation, which is also a good alternative disposal solution for FACs.

Fingerprint characteristics of refined oils and their traceability in the groundwater environment.

Chemical fingerprinting is essential for identifying the presence and responding to oil spills that frequently contaminate the groundwater environment of refineries. In this study, crude oil and oil products from the atmospheric and vacuum distillation units of a refinery were analyzed by gas chromatography-mass spectrometry (GC-MS) to evaluate their chemical variability before and after refinery. A series of experiments involving evaporation and soil column penetration were conducted to simulate refined oil spilling into groundwater and determine appropriate characteristic ratios (CRs) for principal component analysis (PCA) for oil source identification. The simulated study demonstrated that all products had bell-shaped n-alkane distributions, with dominant peaks that remained unchanged or shifted towards longer chain lengths compared to the source oil. Similarly, naphthalene and dibenzothiophene series remained the main PAH components like the source oil. Ten relatively stable CRs were selected for PCA to identify different oil products through the simulated experiments. The chosen CRs were then utilized to identify the sources for two groundwater oil spills recently occurred, one that occurred in an oil depot area, and another near a continuous catalytic reforming unit in a refinery. This study showed that the components with long-chain n-alkanes (n ≥ C18), pristane, phytane, and phenanthrene and dibenzothiophene series PAHs played an important role in the identification of refined oil products spilling into the groundwater environment. The selected CRs provide an effective tool for rapid and accurate identification of oil spills, especially for newly occurring spills in the groundwater environment, which can aid in developing appropriate response strategies.

A simple empirical model for phenanthrene adsorption on soil clay minerals.

Soil clay minerals are effective substrate adsorbents of polycyclic aromatic hydrocarbons (PAHs) in natural soil. The adsorbed PAHs result in long-term contamination of soils. In this paper, a typical PAH phenanthrene (Phe) and nine high purity clay minerals are selected as representative PAH pollutants and adsorbents, respectively. A series of experiments have been conducted to disclose the relationship between the Phe adsorption effect of these clay minerals and their physical properties, including specific surface area (SSA), cation exchange capacity (CEC) and contact angle (CA). Molecular simulation methods are performed to explore the mechanism of clay mineral structure on Phe adsorption at the molecular level. Density functional theory (DFT) calculation suggests that the adsorption of Phe on clay minerals is mainly due to the van der Waals effect. The strength of the O-H-π effect is greater than that of the hydrophobic effect of Phe adsorption. Molecular dynamic (MD) simulations imply that the hydration effect of cations hinders the Phe hydrophobic adsorption by occupying the adsorption sites. Based on the mechanism explored, a simple empirical model is proposed, and the adsorption distribution coefficient Kd of clay mineral and water phases can be precisely predicted by the three physical properties of clay minerals, without rigorous quantitative analysis of soil clay minerals.

Quantitative assessment of the contribution of soil organic matter functional groups and heteroatoms to PAHs adsorption based on the COSMO-RS model.

Soil organic matter (SOM) is considered as a pivotal factor influencing the adsorption of pollutants. However, few prior quantitative investigations of the SOM functional group distribution to the contaminants' fate have been conducted. In this paper, the SOM cluster method based on COSMO-RS theory has been conducted to illustrate the chemical composition variables of SOM that affect the polycyclic aromatic hydrocarbons (PAHs) fate in quantitative terms. In the theoretical simulations, the contributions of carbonyl, carboxyl, aromatic, oxyalkyl and aliphatic groups in SOM to phenanthrene (Phe) and pyrene (Pyr) adsorption are evaluated by calculating the partition coefficients (LogP). The results show that the increase in oxyalkyl content leads to a decrease in LogP. Inversely, carbonyl and carboxyl groups of SOMs positively associated with Phe adsorption. The changes in aromatic and alkyl components have a similar magnitude of influence on LogP. Moreover, the effect of non-carbon-based functional groups in SOM on the Phe partitioning has been examined for the first time. The increase of sulfur and nitrogen content in SOM hinder Phe adsorption, while the rise of phosphorus content promotes the adsorption. In soil adsorption experiments, four natural soils, characterized by X-ray photoelectron spectroscopy (XPS) and Diffuse reflectance infrared Fourier transform (DRIFT), are selected to verify the influence of SOM functional group distribution. Comparing the experimental SOM-water partition coefficient (LogKoc) with the simulation predicted LogP suggests that the COSMO-RS based SOM cluster method can predict PAHs adsorption ability in SOM.

[Advances in the bioaugmentation-assisted remediation of petroleum contaminated soil].

Bioremediation is considered as a cost-effective, efficient and free-of-secondary-pollution technology for petroleum pollution remediation. Due to the limitation of soil environmental conditions and the nature of petroleum pollutants, the insufficient number and the low growth rate of indigenous petroleum-degrading microorganisms in soil lead to long remediation cycle and poor remediation efficiency. Bioaugmentation can effectively improve the biodegradation efficiency. By supplying functional microbes or microbial consortia, immobilized microbes, surfactants and growth substrates, the remediation effect of indigenous microorganisms on petroleum pollutants in soil can be boosted. This article summarizes the reported petroleum-degrading microbes and the main factors influencing microbial remediation of petroleum contaminated soil. Moreover, this article discusses a variety of effective strategies to enhance the bioremediation efficiency, as well as future directions of bioaugmentation strategies.

A Technique for the In Vivo Study of Three-dimensional Cervical Segmental Motion Characteristics After Anterior Screw Fixation for Odontoid Process Fractures.

STUDY DESIGN: Kinematics of the cervical spine was investigated using cone beam computed tomography (CBCT) images combined with three dimensions to three dimensions (3D-3D) registration technology in patients after anterior odontoid screw fixation (AOSF) surgery. OBJECTIVE: The aim of this study was to investigate in vivo 3D cervical motion characteristics of patients who had undergone AOSF surgeries. SUMMARY OF BACKGROUND DATA: AOSF surgery is a classic surgical method for the treatment of odontoid fracture, but there are few studies that investigated its effect on in vivo biomechanics of the cervical spine. Postoperative biomechanical characters of the atlantoaxial joint (C1-C2) and the caudal adjacent segment (C2-C3) have yet to be clarified. METHODS: The study involved 14 patients subjected to a procedure of AOSF with lag screw. Subjects were matched with 14 healthy controls. All subjects underwent CBCT scanning of the cervical spine under seven functional positions. A 3D-3D registration was performed for each vertebra at each functional position to calculate the segmental motion characteristics. The ranges of motion (ROMs) of the C1-C2, C2-C3, and the overall cervical spine (C1-C7) for each of the functional positions were determined. RESULTS: The ROMs of the AOSF group were significantly (P < 0.05) smaller than the control group in flexion-extension positions for the C1-C2 (7.0°vs.11.0°), C2-C3 (3.7°vs.6.7°) and C1-C7 (43.3°vs.54.4°). The twisting ROM of the C1-C2 was 39.3° in the AOSF group and 65.7° in the control (P < 0.05), the bending ROM of the C2-C3 was 2.8° in the AOSF group and 8.9° in the control (P < 0.05). The twisting ROM of C1-C7 segment was 63.2° for the AOSF and 98.1° for the healthy control groups (P < 0.05). CONCLUSION: Although AOSF surgery reduced the flexion-extension ROMs of all investigated spinal segments, additionally, it reduced twisting ROMs of C1-C2 and C1-C7, but only lateral bending ROM of C2-C3, when compared with the control group. The data implied that the AOSF surgery would result in different biomechanics changes in the atlantoaxial segment and caudal adjacent segment. Longer-term follow-up studies of larger patient cohorts are necessary to evaluate the clinical outcomes of patients after the AOSF surgery.Level of Evidence: 3.

Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil.

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 µg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 µg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

Evaluation of MRI and CT parameters to analyze the correlation between disc and facet joint degeneration in the lumbar three-joint complex.

Lumbar 3-joint complex degeneration is a multifactorial, pathological process. Previous studies included insufficient quantitative analyses to prove the relationship between disc degeneration and facet joint osteoarthritis (OA). We assessed the correlation between intervertebral disc and lumbar facet joint degeneration using computed tomography (CT) and magnetic resonance imaging (MRI) parameters.A total of 152 participants who underwent conventional MRI and CT in the clinostat position were included in this study. The presence of lumbar disc degeneration was identified using the Pfirrmann grading system, and the presence of lumbar facet joint degeneration was identified using the Weishaupt grading system. Facet tropism was defined as a divergence more than 7° between the facet joint angles of both sides at the same segment. The intervertebral disc heights were also measured.Most facet joint OA probably appeared at the segment with intervertebral disc degeneration of more than grade III. Facet joint OA was significantly exacerbated with the progression of disc degeneration grade. The intervertebral height significantly decreased with the progression of facet joint degeneration grades, except for grades 0 and 1.Our current study found that each individual joint degeneration influences the other 2 in the lumbar 3-joint complex. Facet tropism was significantly associated with lumbar disc degeneration. Narrowing of the intervertebral disc height probably aggravates the facet joint degeneration further at the same level.

In situ formation of DNA-templated copper nanoparticles as fluorescent indicator for hydroxylamine detection.

Herein, we develop a facile method for selective and sensitive detection of hydroxylamine (HA) based on the in situ formation of DNA templated copper nanoparticles (DNA-CuNPs) as fluorescent probes. It is firstly found that HA as a reducing agent can play a key role in the in situ formation of fluorescent DNA-CuNPs. This special optical property of DNA-CuNPs with (λ ex = 340 nm, λ em = 588 nm) with a mega-Stokes shifting (248 nm) makes it applicable for the turn-on detection of HA. In addition, this fluorescent method has several advantages such as being simple, rapid, and environmentally friendly, because it avoids the traditional organic dye molecules and complex procedures. Under optimized conditions, this platform achieves a fluorescent response for HA with a detection limit of 0.022 mM. Especially, successful detection capability in tap waters and ground waters exhibits its potential to be general method.