Improving the stability, foliar utilization and biological activity of imidacloprid delivery systems: Size effect of nanoparticles.

Nanotechnology could improve the effectiveness and functionality of pesticides, but the size effect of nanopesticides on formulation performance and the related mechanisms have yet to be explored, hindering the precise design and development of efficient and eco-friendly nanopesticides. In this study, two non-carrier-coated imidacloprid formulations (Nano-IMI and Micro-IMI) with identical composition but varying particle size characteristics were constructed to exclude other interferences in the size effect investigation. Nano-IMI and Micro-IMI both exhibited rod-like structures. Specifically, Nano-IMI had average vertical and horizontal axis sizes of 239.5 nm and 561.8 nm, while Micro-IMI exhibited 6.7 µm and 22.1 µm, respectively. Compared to Micro-IMI, the small size effect of Nano-IMI affected the arrangement of interfacial molecules, reduced surface tension and contact angle, thereby improving the stability, dispersibility, foliar wettability, deposition and retention of the nano-system. Nano-IMI exhibited 1.3 times higher toxicity to Aphis gossypii Glover compared to Micro-IMI, attributed to its enhanced foliar utilization efficiency. Importantly, the Nano-IMI did not intensify the toxicity to non-target organism Apis mellifera L. This study systematically elucidates the influence of size effect on key indicators related to the effectiveness and safety, providing a theoretical basis for efficient and safe application of nanopesticides and critical insights into sustainable agriculture and environmental development.

Dual-loaded nano pesticide system based on industrial grade scaleable carrier materials with combinatory efficacy and improved safety.

Repeated and widespread use of single chemical pesticides raises concerns about efficiency and safety, developing multi-component synergistic pesticides provides a new route for efficient control of diseases. Most commercial compound formulations are open systems with non-adjustable released rates, resulting in a high frequency of applications. Meanwhile, although nano pesticide delivery systems constructed with different carrier materials have been extensively studied, realizing their actual scale-up production still has important practical significance due to the large-scale field application. In this study, a boscalid and pyraclostrobin dual-loaded nano pesticide system (BPDN) was constructed with industrial-grade carrier materials to facilitate the realization of large-scale production. The optimal industrial-scale preparation mechanism of BPDN was studied with surfactants as key factors. When agricultural emulsifier No.600 and polycarboxylate are used as the ratio of 1:2 in the preparation process, the BPDN has a spherical structure with an average size of 270 nm and exhibits superior physical stability. Compared with commercial formulation, BPDN maintains rate-stabilized release up to 5 times longer, exhibits better dispersion and spreading performance on foliar, has more than 20% higher deposition amounts, and reduces loss. A single application of BPDN could efficiently control tomato gray mold during the growing period of tomatoes due to extended duration and combinatory effectiveness, reducing two application times and labor costs. Toxicology tests on various objects systematically demonstrated that BPDN has improved safety for HepG2 cells, and nontarget organism earthworms. This research provides insight into creating safe, efficient, and environmentally friendly pesticide production to reduce manual operation times and labor costs. Accompanied by production strategies that can be easily scaled up industrially, this contributes to the efficient use of resources for sustainable agriculture.

The key factors of solid nanodispersion for promoting the bioactivity of abamectin.

Solid nanodispersion (SND) is an important variety of nanopesticides which have been extensively studied in recent years. However, the key influencing factors for bioactivity enhancement of nanopesticides remain unclear, which not only limits the exploration of relevant mechanisms, but also hinders the precise design and development of nanopesticides. In this study, we explored the potential of SND in enhancing the bioactivity of nanopesticides, specifically focusing on abamectin SND prepared using a self-emulsifying-carrier solidifying technique combined with parameter optimization. Our formulation, consisting of 8% abamectin, 1% antioxidant BHT (2,6-di-tert-butyl-4-methylphenol), 12% complex surfactants, and 79% sodium benzoate, significantly increased the pseudo-solubility of abamectin by at least 3300 times and reduced its particle size to a mere 15 nm, much smaller than traditional emulsion in water (EW) and water-dispersible granule (WDG) forms. This reduction in particle size and increase in surface activity resulted in improved foliar adhesion and retention, enabling a more efficient application without the need for organic solvents. The inclusion of antioxidants also enhanced photostability compared to EW, and overall stability tests confirmed SND's resilience under various storage conditions. Bioactivity tests demonstrated a marked increase in toxicity against diamondback moths (Plutella xylostella L.) with abamectin SND, which exhibited 3.7 and 7.6 times greater efficacy compared to EW and WDG, respectively. These findings underscore the critical role of small particle size, high surface activity, and strong antioxidant properties in improving the performance and bioactivity of abamectin SND, highlighting its significance in the design and development of high-efficiency, eco-friendly nanopesticides and contributing valuably to sustainable agricultural practices.

The effect of intraoperative fluoroscopy on acetabular component positioning and patient anatomy restoration during posterior or posterolateral approach total hip arthroplasty: a meta-analysis.

BACKGROUND: Positioning implant components and restoring patient anatomy during total hip arthroplasty (THA) are essential for joint stability, polyethylene liner wear, and range of motion. Previous studies comparing intraoperative fluoroscopy with no fluoroscopy during the posterior or posterolateral approach have reported conflicting results. This meta-analysis evaluated if intraoperative fluoroscopy improves component positioning and femoral component position compared to no fluoroscopy during posterior or posterolateral approach total hip arthroplasty. METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses standards were followed when conducting the systematic review. We searched Web of Science, Embase, PubMed, Cochrane Controlled Trials Register, Cochrane Library, Highwire, CBM, CNKI, VIP, and Wanfang database in May 2023 to identify studies involving Intraoperative fluoroscopy versus no fluoroscopy during posterior or posterolateral approach total hip arthroplasty. Finally, we identified 1133 patients (1145 hips) assessed in seven studies. RESULTS: There were no significant differences in terms of acetabular cup inclination angle (ACIA, P = 0.43), ACIA within safe zone rate (P = 0.58), acetabular cup anteversion angle (ACAA, P = 0.46); ACAA within safe zone rate (P = 0.72), Combined safe zone rate (P = 0.28), dislocation rate (P = 0.64) and infection rate (P = 0.94) between two groups. Compared with the no fluoroscopy group, the intraoperative fluoroscopy group had more operation time (P < 0.00001), less femoral component offset difference (FCOD, P = 0.03), and less LLD (P < 0.00001). CONCLUSION: Even though intraoperative fluoroscopy was not related to an improvement in cup location or dislocation incidence. Our findings demonstrate that the restoration of leg lengths and femoral offset can be significantly improved by using intraoperative fluoroscopy to supplement good surgical skills in THA. The advantages of intraoperative fluoroscopy might become more apparent for surgeons with less experience. To ascertain whether intraoperative fluoroscopy for posterior or posterolateral approach total hip arthroplasty will have clinical benefits and improve the survival of prostheses, more well-powered and well-designed long-term follow-up studies were necessary.

Evaluation of the consistency of the MRI- based AI segmentation cartilage model using the natural tibial plateau cartilage.

OBJECTIVE: The study aims to evaluate the accuracy of an MRI-based artificial intelligence (AI) segmentation cartilage model by comparing it to the natural tibial plateau cartilage. METHODS: This study included 33 patients (41 knees) with severe knee osteoarthritis scheduled to undergo total knee arthroplasty (TKA). All patients had a thin-section MRI before TKA. Our study is mainly divided into two parts: (i) In order to evaluate the MRI-based AI segmentation cartilage model's 2D accuracy, the natural tibial plateau was used as gold standard. The MRI-based AI segmentation cartilage model and the natural tibial plateau were represented in binary visualization (black and white) simulated photographed images by the application of Simulation Photography Technology. Both simulated photographed images were compared to evaluate the 2D Dice similarity coefficients (DSC). (ii) In order to evaluate the MRI-based AI segmentation cartilage model's 3D accuracy. Hand-crafted cartilage model based on knee CT was established. We used these hand-crafted CT-based knee cartilage model as gold standard to evaluate 2D and 3D consistency of between the MRI-based AI segmentation cartilage model and hand-crafted CT-based cartilage model. 3D registration technology was used for both models. Correlations between the MRI-based AI knee cartilage model and CT-based knee cartilage model were also assessed with the Pearson correlation coefficient. RESULTS: The AI segmentation cartilage model produced reasonably high two-dimensional DSC. The average 2D DSC between MRI-based AI cartilage model and the tibial plateau cartilage is 0.83. The average 2D DSC between the AI segmentation cartilage model and the CT-based cartilage model is 0.82. As for 3D consistency, the average 3D DSC between MRI-based AI cartilage model and CT-based cartilage model is 0.52. However, the quantification of cartilage segmentation with the AI and CT-based models showed excellent correlation (r = 0.725; P values < 0.05). CONCLUSION: Our study demonstrated that our MRI-based AI cartilage model can reliably extract morphologic features such as cartilage shape and defect location of the tibial plateau cartilage. This approach could potentially benefit clinical practices such as diagnosing osteoarthritis. However, in terms of cartilage thickness and three-dimensional accuracy, MRI-based AI cartilage model underestimate the actual cartilage volume. The previous AI verification methods may not be completely accurate and should be verified with natural cartilage images. Combining multiple verification methods will improve the accuracy of the AI model.

Design and Synthesis of a Water-Based Nanodelivery Pesticide System for Improved Efficacy and Safety.

Developing an environmentally friendly and safe nanodelivery system is crucial to improve the efficacy of pesticides and minimize environmental and health risks. However, preparing a completely water-based nanopesticide without using harmful solvents is a technical challenge. In this study, a water-based nanodelivery pesticide system was constructed to improve the efficacy and safety of Emamectin Benzoate (EB). A specific surfactant, 29-(4-(5-hydroxynonan-5-yl)phenoxy)-3,6,9,12,15,18,21,24,27-nonaoxanonacosan-1-ol (SurEB) was designed and synthesized to form a water-based nanodelivery system (EBWNS) with EB. Molecular dynamics simulations revealed the self-assembly and interaction forces between SurEB and EB in water, providing insights into the formation mechanism of EBWNS nanoparticles. The nanodelivery system showed the prolonged effectivity of EB with reduced degradation and demonstrated a good control efficacy for multiple target pests, such as red spider mite, beet armyworm larvae (Lepidoptera: Noctuidae), and rice stem borers (Chilo suppressalis). Toxicology tests on various objects demonstrated that the EBWNS has low toxicity for seeds, HaCaT cells, zebrafish, earthworm, and E. coli. This study provides a distinctive perspective for developing environmentally friendly nanopesticide formulations, which clarified a water-based treatment method for specific lipid-soluble pesticides. The water-based nanodelivery pesticide system has the potential to improve the efficacy and safety of pesticides in the process of field applications.