Porcine HERC6 acts as major E3 ligase for ISGylation and is auto-ISGylated for effective ISGylation in porcine.

Interferon-stimulated gene product 15 (ISG15) can be conjugated to substrates through ISGylation. Currently, the E3 ligase for porcine ISGylation remains unclear. Here, we identified porcine HERC5 and HERC6 (pHERC5/6) as ISGylation E3 ligases with pHERC6 acting as a major one by reconstitution of porcine ISGylation system in HEK-293 T cell via co-transfecting E1, E2 and porcine ISG15(pISG15) genes. Meanwhile, our data demonstrated that co-transfection of pISG15 and pHERC5/6 was sufficient to confer ISGylation, suggesting E1 and E2 of ISGylation are interchangeable between human and porcine. Using an immunoprecipitation based ISGylation analysis, our data revealed pHERC6 was a substrate for ISGylation and confirmed that K707 and K993 of pHERC6 were auto-ISGylation sites. Mutation of these sites reduced pHERC6 half-life and inhibited ISGylation, suggesting that auto-ISGylation of pHERC6 was required for effective ISGylation. Conversely, sustained ISGylation induced by overexpression of pISG15 and pHERC6 could be inhibited by a well-defined porcine ISGylation antagonist, the ovarian tumor (OTU) protease domain of Porcine Reproductive and Respiratory Syndrome Virus (PRRSV)-nsp2 and PRRSV-nsp1ß, further indicating such method could be used for identification of virus-encoded ISG15 antagonist. In conclusion, our study contributes new insights towards porcine ISGylation system and provides a novel tool for screening viral-encoded ISG15 antagonist.

Toward a10†dB net-gain waveguide amplifier in an Er3+-Yb3+ co-doped phosphate glass.

High-gain materials and high-quality structures are the two main conditions that determine the amplification performance of optical waveguides. However, it has been hard to balance each other, to date. In this work, we demonstrate breakthroughs in both glass optical gain and optical waveguide structures. We propose a secondary melting dehydration technique that prepares high-quality Er3+-Yb3+ co-doped phosphate glass with low absorption loss. Additionally, we propose a femtosecond laser direct-writing technique that allows controlling the cross section, size, and mode field of waveguides written in glass with high accuracy, leveraging submicron-resolution multi-scan direct-writing optical waveguide technology, which is beneficial for reducing insertion loss. As a proof of concept demonstration, we designed and fabricated two kinds of waveguides, namely, LP01- and LP11-mode waveguides in the Er3+-Yb3+ co-doped phosphate glass, enabling insertion loss as low as 0.9 dB for a waveguide length of 2 mm. Remarkably, we successfully achieved an optical amplification for both the waveguides with a net gain of >7 dB and a net-gain coefficient of >3.5 dB/mm, which is approximately one order of magnitude larger than that in the Er3+-Yb3+ co-doped phosphate glass fabricated by the traditional melt-quenching method. This will open new avenues toward the development of integrated photonic chips.

Dynamic real-time forecasting technique for reclaimed water volumes in urban river environmental management.

In recent years, the utilization of wastewater recycling as an alternative water source has gained significant traction in addressing urban water shortages. Accurate prediction of wastewater quantity is paramount for effective urban river water resource management. There is an urgent need to develop advanced forecasting technologies to further enhance the accuracy and efficiency of water quantity predictions. Decomposition ensemble models have shown excellent predictive capabilities but are challenged by boundary effects when decomposing the original data sequence. To address this, a rolling forecast decomposition ensemble scheme was developed. It involves using a machine learning (ML) model for prediction and progressively integrating prediction outcomes into the original sequence using complementary ensemble empirical mode decomposition with adaptive noise (CEEMDAN). Long short-term memory (LSTM) is then applied for sub-signal prediction and ensemble. The ML-CEEMDAN-LSTM model was introduced for wastewater quantity prediction, compared with non-decomposed ML models, CEEMDAN-based LSTM models, and ML-CEEMDAN-based LSTM models. Three ML algorithms-linear regression (LR), gradient boosting regression (GBR), and LSTM-were examined, using real-time prediction data and historical monitoring data, with historical data selected using the decision tree method. The study used daily water volumes data from two reclaimed water plants, CH and WQ, in Beijing. The results indicate that (1) ML models varied in their selection of real-time factors, with LR performing best among ML models during testing; (2) the ML-CEEMDAN-LSTM model consistently outperformed ML models; (3) the ML-CEEMDAN-LSTM hybrid model performed better than the CEEMDAN-LSTM model across different seasons. This study offers a reliable and accurate approach for reclaimed water volumes forecasting, critical for effective water environment management.

Psychological pathway to emotional exhaustion among nurses and midwives who provide perinatal bereavement care in China: a path analysis.

BACKGROUND: A lack of confidence in perinatal bereavement care (PBC) and the psychological trauma experienced by nurses and midwives during bereavement care leads to their strong need for sufficient organisational support. The current study intended to test a hypothesised model of the specific impact paths among organisational support, confidence in PBC, secondary traumatic stress, and emotional exhaustion among nurses and midwives. METHODS: A descriptive, cross-sectional survey was conducted in sixteen maternity hospitals in Zhejiang Province, China, from August to October 2021. The sample (n = 779) consisted of obstetric nurses and midwives. A path analysis was used to test the relationships among study variables and assess model fit. RESULTS: Organisational support directly and positively predicted confidence in PBC and demonstrated a direct, negative, and significant association with secondary traumatic stress and emotional exhaustion. Confidence in PBC had a positive direct effect on secondary traumatic stress and a positive indirect effect on emotional exhaustion via secondary traumatic stress. Secondary traumatic stress exhibited a significant, direct effect on emotional exhaustion. CONCLUSIONS: This study shows that nurses' and midwives' confidence in PBC and mental health were leadingly influenced by organisational support in perinatal bereavement practice. It is worth noting that higher confidence in PBC may lead to more serious psychological trauma symptoms in nurses and midwives. Secondary traumatic stress plays an essential role in contributing to emotional exhaustion. The findings suggest that support from organisations and self-care interventions were required to improve confidence in PBC and reduce negative psychological outcomes among those providing PBC. The development of objective measures for assessing competence in PBC and organizational support are essential.

Porous Organic Materials in Tissue Engineering: Recent Advances and Applications for Severed Facial Nerve Injury Repair.

The prevalence of facial nerve injury is substantial, and the restoration of its structure and function remains a significant challenge. Autologous nerve transplantation is a common treatment for severed facial nerve injury; however, it has great limitations. Therefore, there is an urgent need for clinical repair methods that can rival it. Tissue engineering nerve conduits are usually composed of scaffolds, cells and neurofactors. Tissue engineering is regarded as a promising method for facial nerve regeneration. Among different factors, the porous nerve conduit made of organic materials, which has high porosity and biocompatibility, plays an indispensable role. This review introduces facial nerve injury and the existing treatment methods and discusses the necessity of the application of porous nerve conduit. We focus on the application of porous organic polymer materials from production technology and material classification and summarize the necessity and research progress of these in repairing severed facial nerve injury, which is relatively rare in the existing articles. This review provides a theoretical basis for further research into and clinical interventions on facial nerve injury and has certain guiding significance for the development of new materials.

New Horizons for Estimating the Time Since Deposition of Fingermarks: Combining Label-Free Physical Visualization and Electrochemical Characterization.

The time since deposition (TSD) of latent fingermarks (LFMs) serves as "witnesses" for crime scene reconstructions. Nevertheless, existing TSD prediction approaches focused on either physical or chemical aging parameters leading to inaccurate estimation. A novel label-free protocol has been developed, where both physical ridge patterns and lipid oxide (LipOx) degradation kinetics are realized using optical microscopy and scanning electrochemical microscopy (SECM) and combined for TSD prediction. Specifically, the surface interrogation (SI)-SECM titration was utilized to monitor the LipOx degradation in LFM arrays aligned by hole array masks, through which we derived the LipOx degradation function. After establishing the relationship between several titration parameters and titrated area by experimental and numerical simulation methods, the titrated area could be reasonably estimated and subsequently used to calculate the surface coverage of LipOx. Results demonstrated that the tip transient revealed the LipOx coverage of deposited LFMs. Notably, LipOx coverage was found to increase during the first day and then decrease over time, whose degradation rate was susceptible to light. Thus, TSD candidates of an LFM could be limited to two values through the established function. Due to the nonmonotonic trend of LipOx aging, a physical parameter "the gray value ratio (GVR) of furrows to ridges" was proposed to exclude irrelevant TSD through support vector machine (SVM) classification. Ultimately, we predicted TSDs of seven LFMs with estimation errors of 2.2-26.8%. Overall, our strategy, with the outperformed capability of gleaning physical and electrochemical information on LFMs, can provide a truly label-free way of studying LFMs and hold great promise for multidimensional fingerprint information analysis.

Alkaline Phosphatase for Estimating the Time since Deposition of Blood Fingerprints by Scanning Electrochemical Microscopy.

Blood is one of the most frequent and valuable traces encountered at crime scenes, where knowing the time since deposition (TSD) of bloodstains tremendously assists forensic experts to screen out crime-related evidence and aids in the reconstruction of the event sequence. Although increasing proof-of-concept methodologies for investigating the TSD of bloodstains have been reported, there is still no accepted strategy in forensic practice as the aging mechanism involves complex components, leading to the inaccuracy of the estimation results. Herein, an endogenous biomarker of alkaline phosphatase (ALP) was chosen to investigate the TSD by scanning electrochemical microscopy (SECM). Results demonstrate that the ALP activity acquired via SECM lateral scan assay exhibited a clear decrease over time, and a similar trend was observed on both poly(vinylidene fluoride) (PVDF) membrane and glass, with the aging kinetics on PVDF membrane being faster than glass. By means of quantitatively calculating the flux of generated p-aminophenol (PAP), we established the aging curve and realized the TSD estimation of blood fingerprints (BFPs) that was unable to be distinguished via optical measurements. Intriguingly, the as-obtained estimation accuracy ranged from 74.6 to 93.7%, proving the possibility of using an ALP biomarker and SECM. More appealingly, the predicted TSDs were capable of accurately differentiating the deposition sequence of overlapping BFPs, which was hardly achieved by optical means. Therefore, this proof-of-concept strategy demonstrates the value of SECM as a forensic tool and opens possibilities for revealing multidimensional information about crime.

Microscale Corrosion Inhibition Behavior of Four Corrosion Inhibitors (BTA, MBI, MBT, and MBO) on Archeological Silver Artifacts Based on Scanning Electrochemical Cell Microscopy.

The problem of corrosion-induced discoloration and embrittlement in silverware is a significant concern for the long-term preservation of excavated archeological silver artifacts, even after thermal restoration. The key to addressing this issue lies in the meticulous selection and evaluation of corrosion inhibitors that possess targeted corrosion inhibition capabilities. This study focuses on the evaluation of corrosion inhibitors for archeological silver artifacts using scanning electrochemical cell microscopy (SECCM) and X-ray photoelectron spectroscopy (XPS). The researchers aimed to compare the inhibition effects of four corrosion inhibitors [1,2,3-benzotriazole (BTA), 2-mercaptobenzimidazole (MBI), 2-mercaptobenzothiazole (MBT), and 2-mercaptobenzoxazole (MBO)] on a simulated Ag-Cu alloy sample and understand their mechanisms. The results showed that MBT exhibited better corrosion inhibition for microstructural regions with higher silver content due to its ability to form stable chelation structures with Ag(I). MBO exhibited better corrosion inhibition for microstructural regions with higher copper content due to its strong affinity with Cu(I). The targeted corrosion inhibition ability for the ß-phase was ranked as MBO > BTA ≈ MBI > MBT, while for the α-phase the ranking was MBT > MBO > MBI > BTA. The study demonstrated the feasibility and capabilities of SECCM in the targeted screening of corrosion inhibitors for different compositions and microstructural regions in archeological metal artifacts. This study highlights the potential of SECCM in corrosion inhibitor research for archeological metal artifacts and wider applications in metal material corrosion protection.

High-order mode waveguide amplifier with high mode extinction ratio written in an Er3+-doped phosphate glass.

Inscription of fiber-compatible active waveguides in high-gain glass, followed by direct interconnection with few-mode fibers, is one of the most promising solutions for all-optical mode-division multiplexing. In this work, based on the femtosecond laser writing technique, we propose a general fabrication scheme for inscribing high-order mode waveguides in glass, by carefully tailoring the cross-section of the waveguides to match the mode intensity distribution via an improved multi-scan approach. Specifically, we design and fabricate two kinds of waveguides, namely, LP01-mode waveguide and LP11-mode waveguide in a highly Er3+-doped phosphate glass, enabling the insertion loss of the waveguides to be as low as 1.88 dB, and the mode extraction factor of the LP11-mode waveguide up to ∼24 dB. Importantly, we have successfully achieved optical amplification of the waveguides, with an on-off gain as high as 3.52 dB. This novel high-order mode waveguide amplifier has broad application prospects in monolithic on-chip integrated photonic light sources and optical interconnection with few-mode fiber and/or silicon-based waveguide.

Physical visualization and squalene-based scanning electrochemical microscopy imaging of latent fingerprints on PVDF membrane.

Fingerprints have long been the gold standard for personal identification in forensic science. However, realizing the high-resolution enhancement of eccrine LFPs is difficult using the traditional methods and the label-free detection of fingerprint residue information is also challenging. Herein, we propose two enhancement strategies for LFPs on PVDF membrane (LFPs/PVDF) using blue-black ink staining and scanning electrochemical microscopy (SECM). The blue-black ink staining method was used for the first time to develop three types (sebaceous, natural and eccrine) of LFPs/PVDF based on the difference in wettability between the fingerprint residues and PVDF membrane. The enhanced fingerprints clearly displayed levels 1-3 features with high contrast and low background interference. Furthermore, we achieved chemical imaging of the LFP/PVDF samples, where their possible visualization mechanisms were ascribed to the electrochemical reactivity of squalene and difference in wettability between the LFP and PVDF membrane, which was first proposed and investigated by SECM imaging and water contact angle (WCA) measurements, respectively. Significantly, SECM imaging not only provided fingerprint patterns without any labelling but also revealed the spatial distribution information of squalene in LFPs simultaneously. In addition, it was also demonstrated that LFPs deposited on various surfaces were first successfully transferred to the PVDF membrane, and then further developed with both methods, making them general for personal identity-related applications. Taken together, the blue-black ink staining method can easily and quickly obtain level 3 features of LFPs/PVDF and the SECM approach can non-invasively image the topography and chemical information of LFPs/PVDF, and thus they can be potentially selected according to various requirements in forensic scenarios.

Wet nitrocellulose membrane for the level 3 feature visualization of various latent fingerprints and gender determination.

A facile and high-resolution enhancement of latent fingerprints (LFPs) has been developed by using a wet nitrocellulose (NC) membrane as a matrix under natural light. A clear fingerprint pattern was presented on the membrane after a fingertip touch owing to the difference in light transmittance between the ridge residues and the wet-NC-membrane background. Compared with conventional methods, this protocol can provide a higher resolution fingerprint image to extract level 3 details accurately. It is also compatible with commonly used fingerprint visualization techniques (magnetic ferric oxide powder and AgNO3. The modified membrane could be more general to realize the high-resolution visualization of LFP transferred from various substrates, even independent of light projection. Due to the excellent feasibility and reproducibility of level 3 details extracted by the wet NC membrane, the frequency distribution of the distance between adjacent sweat pores (FDDasp) could be used to effectively distinguish the fragmentary fingerprints. Finally, the level 3 features of LFPs from females and males were conveniently extracted by the wet-NC-membrane method for gender identification. The statistical results indicated that females had a higher average sweat pore density (115/9 mm2) than males (84/9 mm2). Taken together, this approach provided a high-resolution, reproducible, and accurate imaging of LFPs, which shows great promise for forensic information analysis.

Characterising salivary peptidome across diurnal dynamics and variations induced by sampling procedures.

OBJECTIVES: This study aimed to characterise diurnal dynamics of salivary peptidome and variations induced by sampling procedures. MATERIALS AND METHODS: A supervised short-term longitudinal study was conducted amongst ten healthy participants. Saliva samples were collected by different procedures (stimulated/unstimulated conditions, forepart/midstream segments) on three consecutive days. The peptidome compositions of saliva samples were analysed using matrix-assisted laser desorption/ionisation-time of flight-mass spectrometry (MALDI-TOF MS). RESULTS: The salivary peptidome exhibited a stable trend generally, even though some diurnal dynamics happened in aspects of both overall structure and certain single peptides. The results indicated saliva samples collected under unstimulated and stimulated conditions have significantly different structures of peptidome, whilst the peptidome profile of stimulated saliva was more abundant than that of unstimulated saliva. It was also indicated that the midstream segment effect might exist in the segmented process of saliva sampling. CONCLUSIONS: In summary, salivary peptidome was able to maintain stability though some dynamic changes might happen within a short-term period. Stimulated and unstimulated saliva samples had significantly different peptidome profiles, whilst the stimulated whole saliva was a larger pool of low molecular weight peptides. CLINICAL RELEVANCE: The stability of the salivary peptidome highlights the reliability of salivary peptidome as a source of diagnostic biomarker. We recommend keeping one collection condition (stimulated/unstimulated) consistently within one study on salivary peptidome. Stimulated whole saliva would be preferred if more abundant peptidome profile is needed.

Copper in grape and wine industry: Source, presence, impacts on production and human health, and removal methods.

Heavy metals are of particular concern in grape and wine processing, especially copper. The sources of copper are diverse, including vineyard soil, copper-containing pesticides on the fruit surface, copper wine-making equipment, and exogenous addition in winemaking. Copper has potential risks to human nerves, metabolism, and others. It can inhibit yeast growth, delay fermentation, and also mediate oxidation reactions, which has a huge impact on the nutritional quality and sensory quality of fresh wine and aged wine. It is therefore crucial to detect, quantify, and remove copper from grapes and wine. However, the copper situations in the wine industries of various countries are complicated and diverse, and the existing forms of copper are quite different, which makes the research challenging. This review summarizes and analyzes the existence and influence of copper in the wine industry by analyzing the sources of, the current situation regarding, and the detection and removal methods for copper in wine. With the study, a better understanding of copper's impact on wine production will be gained, facilitating further control of copper in wine and helping the wine industry grow.

The effect of the root dilaceration on the treatment duration and prognosis of unilateral impacted immature maxillary central incisors.

INTRODUCTION: This study aimed to investigate the effect of root dilaceration on the closed-eruption technique treatment and prognosis on impacted immature maxillary central incisors. METHODS: In this retrospective study, we compared the age at the beginning of the treatment, the treatment duration, root development, and alveolar bone mass after the closed-eruption technique between the impacted immature maxillary central incisors with dilacerated roots (group 1) and those with straight roots (group 2). RESULTS: The mean age at the time of the surgery of group 1 was 0.9 years younger than that of group 2 (P = 0.008). The mean traction time was greater in group 1 (8.0 ± 1.8 months), with a difference of 1.4 months than in group 2 (6.6 ± 2.1 months) (P = 0.042). The measurements of lingual bone thickness at the alveolar crest (C) showed significant differences between the 2 groups (P = 0.025). No significant differences were found in other treatment duration or measurements of root development and alveolar bone mass between the 2 groups. CONCLUSIONS: Patients with impacted immature incisors with dilacerated roots were younger at the beginning of the closed-eruption treatment and had a longer traction time than those with impacted immature incisors having straight roots. The root dilaceration had little or no effect on root development and alveolar bone mass after the closed-eruption treatment. The closed-eruption treatment of impacted immature incisors with root dilaceration is suggested to commence as early as possible.

Critical care nurses' knowledge, attitudes, and practices of pressure injury prevention in China: A multicentric cross-sectional survey.

Pressure injury is a serious and preventable problem in intensive care units. Translating guidelines into clinical practice can reduce the incidence of pressure injury. Identifying clinical status, barriers and facilitators contribute to guideline implementation. To identify the knowledge, attitudes, and practices of pressure injury prevention in Chinese critical care nurses. Secondary data were extracted from a multicentric clinical trial. Knowledge and attitudes toward pressure injury prevention were assessed by a fourteen-item questionnaire. The observed practices were recorded using a case report form. The report complies with the STROBE statement. A total of 950 critical care nurses in 15 hospitals from six provinces of China were investigated. A total of 53.1% of nurses received a median score of 6 points or less. Knowledge regarding the repositioning procedure, risk assessment, and heel pressure injury prevention was insufficient. Over 99% of nurses strongly or somewhat agreed that pressure injury prevention was very important and that they were willing to take measures to prevent pressure injury. A total of 27 781 patient days of pressure injury prevention practice were recorded. Repositioning was the most commonly used prevention measure, followed by support surfaces and prophylactic dressings. A combination of repositioning, support surface, and prophylactic dressing was lacking. Chinese critical nurses showed a low level of knowledge and a positive attitude toward pressure injury prevention. Practices of pressure injury prevention were unsatisfactory. There is a clear gap between the guidelines and clinical practices. The barrier (low-level knowledge) and facilitator (positive attitude) were identified in this study. According to these findings, strategies need to be developed to promote guideline implementation.

Real wine or not? Protecting wine with traceability and authenticity for consumers: chemical and technical basis, technique applications, challenge, and perspectives.

Wine is a high-value alcoholic beverage welcomed by consumers because of its flavor and nutritional value. The key information on wine bottle label is the basis of consumers' choice, which also becomes a target for manufacturers to adulterate, including geographical origin, grape variety and vintage. With the improvement of wine adulteration technology, modern technological means are needed to solve the above mentioned problems. The chemical basis of wine determines the type of technique used. Detection technology can be subdivided into four groups: mass spectrometry techniques, spectroscopic techniques, chromatography techniques, and other techniques. Multivariate statistical analysis of the data was performed by means of chemometrics methods. This paper outlines a series of procedures for wine classification and identification, and classified the analytical techniques and data processing methods used in recent years with listing their principles, advantages and disadvantages to help wine researchers choose appropriate methods to meet the challenge and ensure wine traceability and authenticity.

How to comprehensively improve juice quality: a review of the impacts of sterilization technology on the overall quality of fruit and vegetable juices in 2010-2021, an updated overview and current issues.

Fruit and vegetable juices (FVJ) are rich in nutrients, so they easily breed bacteria, which cause microbial pollution and rapid deterioration of their quality and safety. Sterilization is an important operation in FVJ processing. However, regardless of whether thermal sterilization or non-thermal sterilization is used, the effect and its impact on the overall quality of FVJ are strongly dependent on the processing parameters, microbial species, and FVJ matrix. Therefore, for different types of FVJ, an understanding of the impacts that different sterilization technologies have on the overall quality of the juice is important in designing and optimizing technical parameters to produce value-added products. This article provides an overview of the application of thermal and non-thermal technique in the field of FVJ processing over the past 10 years. The operating principle and effects of various technologies on the inactivation of microorganisms and enzymes, nutritional and functional characteristics, physicochemical properties, and sensory quality of a wide range of FVJ are comprehensively discussed. The application of different combinations of hurdle technology in the field of FVJ sterilization processing are also discussed in detail. Additionally, the advantages, limitations, and current application prospects of different sterilization technologies are summarized.

Surface-capping engineering for electrically neutral surface of perovskite films and stable solar cells.

Metal halide perovskite solar cells (PSCs) have developed rapidly in recent years, due to their high performance and low-cost solution-based fabrication process. These excellent properties are mainly attributed to the high defect tolerance of polycrystalline perovskite films. Meanwhile, these defects can also facilitate ion migration and carrier recombination, which cause the device performance and the long-term stability of PSCs to deteriorate heavily. Therefore, it is critical to passivate the defects, especially at the surfaces of perovskite grains where the defects are most concentrated due to the dangling bonds. Here we propose a surface-capping engineering (SCE) method to construct 'dangling-bond-free' surfaces for perovskite grains. Diamine iodide (methylenediammonium diiodide, MDAI2) was used to construct an electroneutral PbX6-MDA-PbX6(X = Cl, Br or I) layer at the perovskite surfaces. Compared to the monovalent FA+which can only coordinate one [PbX6]4-slab, the bivalent MDA2+can coordinate two [PbX6]4-slabs on both sides, thus realizing a dangling-bond-free surface. Solar cells based on SCE-perovskite films exhibited a higher power conversion efficiency (PCE) of 21.6%, compared with 19.9% of the control group; and maintained over 96% of its initial PCE after 13 h during the maximum power point tracking test under continuous AM1.5G illumination, whereas the control group only lasted 1.5 h. Constructing a dangling-bond-free capping layer on the grain boundary opens new avenues for the fabrication of ultralow-defect polycrystalline semiconductors, paving the way to further improve the PCE and lifetime of PSCs.

Withdrawn: MiR-101-3p inhibits MTX-mediated HMGB1 release and reduces recruitment and M1-like polarization of macrophages through the UBE2D1/KAT2B pathway.

The above article, published online on 5 December 2022, on Wiley Online Library (https://onlinelibrary.wiley.com/doi/abs/10.1002/htj.22448), has been withdrawn by agreement between the journal Editor in Chief, Hari Bhat, and Wiley Periodicals, LLC. The withdrawal has been agreed due to a technical error at the publisher that caused the article to be mistakenly published online although publication had been canceled because the authors did not approve their proof.

Peptidomic changes of saliva after non-surgical treatment of stage I/II generalized periodontitis.

OBJECTIVE: To explore the changes of peptidome profiles of saliva, serum, and gingival crevicular fluid (GCF) before and after non-surgical periodontal treatment in patients with generalized periodontitis (stage I/II). SUBJECTS AND METHODS: Saliva, serum, and GCF samples were collected from 17 patients at baseline (T0 ), one week after ultrasonic supragingival scaling (T1 ) and eight weeks after subgingival scaling and root planning (T2 ). Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was carried out to detect changes in peptidomic profiles. Then, nano-liquid chromatography-electrospray ionization-tandem mass spectrometry (nano-LC/ESI-MS/MS) was performed to identify potential peptide biomarkers. RESULTS: Most of the peptides from the patients exhibited a decreasing trend from the time point of pretreatment to that of post-treatment. Cluster analysis and scatter plots using these peptides indicated that salivary peptidome has an acceptable capability of reflecting the status of stage I/II generalized periodontitis. Seven of these peptides were successfully identified as α-1-antitrypsin, immunoglobulin κ variable 4-1, haptoglobin, and immunoglobulin heavy constant γ2. CONCLUSIONS: Certain peptides in saliva, serum, and GCF were down-regulated after non-surgical periodontal treatment, demonstrating the application prospects of saliva in monitoring and surveillance of periodontal diseases in both clinical settings and communities.