RESUMEN
Perfluoroalkyl substances (PFAS), known as "forever chemicals," are a growing concern in the sphere of human and environmental health. In response, rapid, reproducible, and inexpensive methods for PFAS detection in the environment and home water supplies are needed. We have developed a simple and inexpensive perfluoroalkyl acid detection method based on an electrically read lateral flow assay (e-LFA). Our method employs a fluorous surfactant formulation with undoped polyaniline (F-PANI) fabricated to create test lines for the lateral flow assay. In perfluoroalkyl acid sensing studies, an increase in conductivity of the F-PANI film is caused by acidification and doping of PANI. A conductivity enhancement by 104-fold can be produced by this method, and we demonstrate a limit of detection for perfluorooctanoic acid (PFOA) of 400 ppt and perfluorobutanoic acid of 200 ppt. This method for PFOA detection can be expanded for wide-scale environmental and at-home water testing.
RESUMEN
Phenanthracene nanotubes with arylene-ethynylene-butadiynylene rims and phenanthracene walls are synthesized in a modular bottom-up approach. One of the rims carries hexadecyloxy side chains, mediating the affinity to highly oriented pyrolytic graphite. Molecular dynamics simulations show that the nanotubes are much more flexible than their structural formulas suggest: In 12, the phenanthracene units act as hinges that flip the two macrocycles relative to each other to one of two possible sites, as quantum mechanical models suggest and scanning tunneling microscopy investigations prove. Unexpectedly, both theory and experiment show for 13 that the three phenanthracene hinges are deflected from the upright position, accompanied by a deformation of both macrocycles from their idealized sturdy macroporous geometry. This flexibility together with their affinity to carbon-rich substrates allows for an efficient host-guest chemistry at the solid/gas interface opening the potential for applications in single-walled carbon nanotube-based sensing, and the applicability to build new sensors for the detection of 2,4,6-trinitrotoluene via nitroaromatic markers is shown.
RESUMEN
A chemiresistive sensor is described for the detection of methane (CH4), a potent greenhouse gas that also poses an explosion hazard in air. The chemiresistor allows for the low-power, low-cost, and distributed sensing of CH4 at room temperature in air with environmental implications for gas leak detection in homes, production facilities, and pipelines. Specifically, the chemiresistors are based on single-walled carbon nanotubes (SWCNTs) noncovalently functionalized with poly(4-vinylpyridine) (P4VP) that enables the incorporation of a platinum-polyoxometalate (Pt-POM) CH4 oxidation precatalyst into the sensor by P4VP coordination. The resulting SWCNT-P4VP-Pt-POM composite showed ppm-level sensitivity to CH4 and good stability to air as well as time, wherein the generation of a high-valent platinum intermediate during CH4 oxidation is proposed as the origin of the observed chemiresistive response. The chemiresistor was found to exhibit selectivity for CH4 over heavier hydrocarbons such as n-hexane, benzene, toluene, and o-xylene, as well as gases, including carbon dioxide and hydrogen. The utility of the sensor in detecting CH4 using a simple handheld multimeter was also demonstrated.
RESUMEN
Membrane-based gas separations are crucial for an energy-efficient future. However, it is difficult to develop membrane materials that are high-performing, scalable, and processable. Microporous organic polymers (MOPs) combine benefits for gas sieving and solution processability. Herein, we report membrane performance for a new family of microporous poly(arylene ether)s (PAEs) synthesized via Pd-catalyzed C-O coupling reactions. The scaffold of these microporous polymers consists of rigid three-dimensional triptycene and stereocontorted spirobifluorene, endowing these polymers with micropore dimensions attractive for gas separations. This robust PAE synthesis method allows for the facile incorporation of functionalities and branched linkers for control of permeation and mechanical properties. A solution-processable branched polymer was formed into a submicron film and characterized for permeance and selectivity, revealing lab data that rivals property sets of commercially available membranes already optimized for much thinner configurations. Moreover, the branching motif endows these materials with outstanding plasticization resistance, and their microporous structure and stability enables benefits from competitive sorption, increasing CO2 /CH4 and (H2 S+CO2 )/CH4 selectivity in mixture tests as predicted by the dual-mode sorption model. The structural tunability, stability, and ease-of-processing suggest that this new platform of microporous polymers provides generalizable design strategies to form MOPs at scale for demanding gas separations in industry.
RESUMEN
Per- and poly(fluoroalkyl) substances (PFAS) are environmentally persistent pollutants that are of growing concern due to their detrimental effects at ultratrace concentrations (ng·L-1) in human and environmental health. Suitable technologies for on-site ultratrace detection of PFAS do not exist and current methods require complex and specialized equipment, making the monitoring of PFAS in distributed water infrastructures extremely challenging. Herein, we describe amplifying fluorescent polymers (AFPs) that can selectively detect perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) at concentrations of ng·L-1. The AFPs are highly fluorinated and have poly(p-phenylene ethynylene) and polyfluorene backbones bearing pyridine-based selectors that react with acidic PFAS via a proton-transfer reaction. The fluorinated regions within the polymers partition PFAS into polymers, whereas the protonated pyridine units create lower-energy traps for the excitons, and emission from these pyridinium sites results in red-shifting of the fluorescence spectra. The AFPs are evaluated in thin-film and nanoparticle forms and can selectively detect PFAS concentrations of â¼1 ppb and â¼100 ppt, respectively. Both polymer films and nanoparticles are not affected by the type of water, and similar responses to PFAS were found in milliQ water, DI water, and well water. These results demonstrate a promising sensing approach for on-site detection of aqueous PFAS in the ng·L-1 range.
RESUMEN
Bottom-up materials design by the conceiving of new molecular building blocks is powerful and chemists are uniquely qualified to innovate. Liquid crystals (LCs) and related soft crystals, collectively called mesophases, naturally create materials with dynamic properties. The thermotropic LC state has a liquid-like intermolecular disorder, but the cooperative nature of these materials facilitates a long-range directional order (alignment) that couples strongly to applied electric/magnetic fields and interfaces. Thermotropic LCs are held together by mesogen cores, which are often unsaturated with anisotropic polarizability, and are appended with flexible (often n-alkane) side chains. Thermal excitation of the side chains produces large amplitude motions that drive a melting transition, and the anisotropic attractions between mesogenic cores produce a directional organization that produces the LC order. LCs are liquids as defined by thermodynamics and may not contain three-dimensional (3D) organization. However, in many cases there are 3D ordered phases below the melting temperatures, which are soft (deformable) plastic materials. Unconventional mesogens offer opportunities to create responsive molecular assemblies with optical, electronic, or magnetic activity. I will detail in this account my efforts to control these dynamic states with the goal of creating polar organizations in columnar LCs. The use of molecular shape, dative bonding, and dynamic correlations between molecules in fluid/plastic phases will be highlighted and how applied electric fields can polarize select materials.
Asunto(s)
Cristales Líquidos , Alcanos , Cristales Líquidos/química , Plásticos , Temperatura , TermodinámicaRESUMEN
We found that a previously reported synthesis of 9,9-disubstituted 9,10-dihydroacridines (DHAs) that relied on an acid-catalyzed cyclization was plagued by a competing elimination reaction, resulting in some elimination products being incorrectly identified as their structural isomer DHAs. In this report, we provide improved synthetic procedures for 9,9-disubstituted DHAs, demonstrated by the synthesis of two 9,9-diethyl DHAs.
RESUMEN
Here we report a sensing method for Listeria monocytogenes based on the agglutination of all-liquid Janus emulsions. This two-dye assay enables the rapid detection of trace Listeria in less than 2 h via an emissive signal produced in response to Listeria binding. The biorecognition interface between the Janus emulsions is assembled by attaching antibodies to a functional surfactant polymer with a tetrazine/transcyclooctene click reaction. The strong binding between Listeria and the Listeria antibody located at the hydrocarbon surface of the emulsions results in the tilting of the Janus structure from its equilibrium position to produce emission that would ordinarily be obscured by a blocking dye. This method provides rapid and inexpensive Listeria detection with high sensitivity (<100 CFU/mL in 2 h) that can be paired with many antibody or related recognition elements to create a new class of biosensors.
Asunto(s)
Técnicas Biosensibles/métodos , Emulsiones/química , Colorantes Fluorescentes/química , Listeria monocytogenes/aislamiento & purificación , Aglutinación , Anticuerpos Antibacterianos , Contaminación de Alimentos/análisis , Microbiología de Alimentos/métodos , Enfermedades Transmitidas por los Alimentos/prevención & control , Listeria monocytogenes/inmunología , Listeriosis/prevención & control , Microscopía ConfocalRESUMEN
The ubiquitous presence of per- and polyfluoroalkyl substances (PFAS) in aqueous environments has aroused societal concern. Nonetheless, effective sensing technologies for continuous monitoring of PFAS within water distribution infrastructures currently do not exist. Herein, we describe a ratiometric sensing approach to selectively detect aqueous perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) at concentrations of µg â L-1 . Our method relies on the excitonic transport in a highly fluorinated poly(p-phenylene ethynylene) to amplify a ratiometric emission signal modulated by an embedded fluorinated squaraine dye. The electronic coupling between the polymer and dye occurs through overlap of π-orbitals and is designed such that energy transfer is dominated by an electron-exchange (Dexter) mechanism. Exposure to aqueous solutions of PFAS perturbs the orbital interactions between the squaraine dye and the polymer backbone, thereby diminishing the efficiency of the energy transfer and producing a "polymer-ON/dye-OFF" response. These polymer/dye combinations were evaluated in spin-coated films and polymer nanoparticles and were able to selectively detect PFAS at concentrations of ca. 150 ppb and ca. 50 ppb, respectively. Both polymer films and nanoparticles are not affected by the type of water, and similar responses to PFAS were found in milliQ and well water.
RESUMEN
Faraday rotation is a magneto-optical effect central to a number of commercial technologies including optical isolation and magneto-optical imaging. Today, the performance needs of these technologies are met by inorganic materials containing paramagnetic heavy elements. However, organic thin films are increasingly being evaluated as replacement materials, promising higher magneto-optical performance and facile fabrication of structures that enable expanded applications. Despite being an object of research for more than 175 years, our understanding of the Faraday effect in solid-state organic materials remains incomplete, hindering our attempts to methodically improve magneto-optical performance. This Perspective aims to place several recent advances in the field of thin-film organic Faraday rotators within the well-established theoretical framework developed by solution-state magnetic circular dichroism spectroscopists: the Faraday A, B, and C terms. Through careful consideration of these quantum mechanical mechanisms in example molecules, an intuitive understanding of the impact of chemical structure in thin-film Faraday rotators can be achieved, including the critical roles of molecular symmetry, rigidity, absorptivity, and magnetism. Future work seeking to maximize the magneto-optical performance of organic thin films may more readily evaluate candidate chromophores based on the Faraday A, B, and C term framework presented herein.
RESUMEN
Photonic Janus particles with a sphere fused to a cone are created from the phase separation of dendronized brush block copolymers (den-BBCP) and poly(4-vinylpyridine)-r-polystyrene (P4VP-r-PS) during the solvent evaporation of oil-in-water emulsions. Rapid self-assembly of den-BBCP generates well-ordered lamellar structures stacking along the long axis of the particles, producing structural colors that are dependent on the incident light angle. The colors are tunable over the visible spectrum by varying the molecular weight of den-BBCP. The P4VP-r-PS phase can undergo further surface modifications to produce multifunctional photonic Janus particles. Specifically, real-time magnetic control of the reflected color is achieved by coating the P4VP-r-PS phase with citric acid-capped Fe3O4 nanoparticles. Charged biomolecules (i.e., antibodies) are electrostatically immobilized to the Fe3O4 coating for potential applications in biosensing. As a demonstration, a new photonic sensor for the foodborne pathogen Salmonella is developed with antibody-modified photonic Janus particles, where the angle-dependent structural color plays a key role in the sensing mechanism.
Asunto(s)
Nanopartículas Multifuncionales , Magnetismo , Fotones , Poliestirenos/química , Solventes/químicaRESUMEN
Many biosensing methods rely on signals produced by enzyme-catalyzed reactions and efficient methods to detect and record this activity. Herein, we report a wireless lateral flow device and demonstrate the conversion of oxidase reactions to changes in the resonance of radio frequency identification (RFID) circuits. The detection is triggered by polyoxometalate-catalyzed oxidative doping of polypyrrole (pPy) when exposed to oxidase-generated H2O2. We have integrated this transduction and RFID capability into a lateral flow device to create a low-cost, rapid, and portable method for quantitative biological signal detection. We further report a new method for creating functional coatings from pPy core-shell colloidal particles bioconjugated for streptavidin-biotin recognition with glucose oxidase or pyruvate oxidase. The biofunctionalized pPy particles coalesce on the nitrocellulose membrane to produce a chemiresistive band. Glucose or pyruvate solutions result in formation of H2O2 at the pPy bands, functionalized with the respective oxidase, to produce conductivity enhancements exceeding 7·105%. Placing the pPy band in the RFID circuit converts the resistivity response to a change of RF resonance. The enzymatic response of glucose oxidase is recorded within 30 min with as low as 0.6 mM of glucose using this lateral flow device. Pyruvate is also shown to produce large responses. The oxidase enzymes/pPy transduction establishes a resistivity-based platform for the construction of a new family of lateral flow devices capable of detecting and quantifying biological targets.
Asunto(s)
Técnicas Biosensibles , Glucosa Oxidasa , Aniones , Técnicas Biosensibles/métodos , Enzimas Inmovilizadas , Glucosa , Peróxido de Hidrógeno , Polielectrolitos , Polímeros , Pirroles , PiruvatosRESUMEN
The use of molecules as active components to build nanometer-scale devices inspires emerging device concepts that employ the intrinsic functionality of molecules to address longstanding challenges facing nanoelectronics. Using molecules as controllable-length nanosprings, here we report the design and operation of a nanoelectromechanical (NEM) switch which overcomes the typical challenges of high actuation voltages and slow switching speeds for previous NEM technologies. Our NEM switches are hierarchically assembled using a molecular spacer layer sandwiched between atomically smooth electrodes, which defines a nanometer-scale electrode gap and can be electrostatically compressed to repeatedly modulate the tunneling current. The molecular layer and the top electrode structure serve as two degrees of design freedom with which to independently tailor static and dynamic device characteristics, enabling simultaneous low turn-on voltages (sub-3 V) and short switching delays (2 ns). This molecular platform with inherent nanoscale modularity provides a versatile strategy for engineering diverse high-performance and energy-efficient electromechanical devices.
Asunto(s)
ElectrodosRESUMEN
Molecules can serve as ultimate building blocks for extreme nanoscale devices. This requires their precise integration into functional heterojunctions, most commonly in the form of metal-molecule-metal architectures. Structural damage and nonuniformities caused by current fabrication techniques, however, limit their effective incorporation. Here, we present a hybrid fabrication approach enabling uniform and active molecular junctions. A template-stripping technique is developed to form electrodes with sub-nanometer smooth surfaces. Combined with dielectrophoretic trapping of colloidal nanorods, uniform sub-5 nm junctions are achieved. Uniquely, in our design, the top contact is mechanically free to move under an applied stimulus. Using this, we investigate the electromechanical tuning of the junction and its tunneling conduction. Here, the molecules help control sub-nanometer mechanical modulation, which is conventionally challenging due to instabilities caused by surface adhesive forces. Our versatile approach provides a platform to develop and study active molecular junctions for emerging applications in electronics, plasmonics, and electromechanical devices.
RESUMEN
Porous organic polymers (POPs) with strong covalent linkages between various rigid aromatic structural units having different geometries and topologies are reported. With inherent porosity, predictable structure, and tunable functionality, POPs have found utility in gas separation, heterogeneous catalysis, sensing, and water treatment. Poly(arylene ether)s (PAEs) are a family of high-performance thermoplastic materials with high glass-transition temperatures, exceptional thermal stability, robust mechanical properties, and excellent chemical resistance. These properties are desirable for development of durable POPs. However, the synthetic methodology for the preparation of these polymers has been mainly limited in scope to monomers capable of undergoing nucleophilic aromatic substitution (SNAr) reactions. Herein, we describe a new general method using Pd-catalyzed C-O polycondensation reactions for the synthesis of PAEs. A wide range of new compositions and PAE architectures are now readily available using monomers with unactivated aryl chlorides and bromides. Specifically, monomers with conformational rigidity and intrinsic internal free volume are now used to create porous organic polymers with high molecular weight, good thermal stability, and porosity. The reported porous PAEs are solution processable and can be used in environmentally relevant applications including heavy-metal-ion sensing and capture.
Asunto(s)
Éteres/síntesis química , Paladio/química , Polímeros/síntesis química , Catálisis , Éteres/química , Estructura Molecular , Tamaño de la Partícula , Polímeros/química , Porosidad , Propiedades de SuperficieRESUMEN
Hydrogen peroxide is a dynamic signaling molecule in biological systems. We report herein a versatile double emulsion sensor that can detect femtomolar quantities of aqueous hydrogen peroxide. The mechanism responsible for this sensitivity is a peroxide induced change in double emulsion structure, which results in a modified directional emission from dyes dissolved in the high index organic phase. The morphology (structure) of the double emulsion is controlled via interfacial tensions and a methyltrioxorhenium catalyzed sulfide oxidation results in an enhancement of the surfactant effectiveness. The incipient polar sulfoxide induced decrease of the interfacial tension at the organic-water (O-W) interface results in an increased interfacial area between the organic phase and water and a diminished emission perpendicular to the supporting substrate. The modularity of our sensory system is demonstrated through cascade catalysis between methyltrioxorhenium and oxidase enzymes, with the latter producing hydrogen peroxide as a byproduct to enable for the selective and sensitive detection of molecular and ionic enzymatic substrates.
RESUMEN
Herein we describe a highly responsive optical biosensor based on dynamic complex liquid crystal (LC) emulsions. These emulsions are simple to prepare and consist of immiscible chiral nematic liquid crystals (N*) and fluorocarbon oils. In this work, we exploit the N* selective reflection to build a new sensing paradigm. Our detection strategy is based on changes in the LC/water interfacial activity of boronic acid polymeric surfactants caused by reversible interactions with IgG antibodies at the LC interface. Such biomolecular recognition events can vary the pitch length of the N* organization due to the presence of binaphthyl units in the polymeric structure, which are known to be powerful chiral dopants. We demonstrate that these interface-triggered reflection changes can be used as an effective optical read-out for the detection of the foodborne pathogen Salmonella.
Asunto(s)
Técnicas Biosensibles , Cristales Líquidos/química , Salmonella/aislamiento & purificación , Ácidos Borónicos/química , Emulsiones/química , Inmunoglobulina G/química , Tensoactivos/químicaRESUMEN
We describe a novel class of tetraphenylbenzene-based discotic molecules with exceptional self-assembling properties. Absorption and fluorescence studies confirmed the formation of J-type aggregates in solution. The discotic mesogens also show an enhancement of the emission upon aggregation. Interestingly, these discotic molecules displayed enantiotropic hexagonal columnar liquid crystal (LC) phases that can be switched into a helical columnar organization by application of an electric field. The helical columns arise from the electric-field-induced tilt of the polar fluorobenzene ring that directs all of the peripheral phenyl groups into a propeller-like conformation with respect to the central benzene core. A cooperative assembly process of these propeller-shaped molecules resolves into a helical columnar organization, in which the preferred helical sense is obtained from the stereogenic center proximate to the polar carbon-fluorine bond. The ease of inducing chirality in columnar LCs by an electric field presents opportunities to create next-generation chiral materials for a variety of applications.
RESUMEN
The magneto-optical phenomenon known as Faraday rotation involves the rotation of plane-polarized light as it passes through an optical medium in the presence of an external magnetic field oriented parallel to the direction of light propagation. Faraday rotators find applications in optical isolators and magnetic-field imaging technologies. In recent years, organic thin films comprised of polymeric and small-molecule chromophores have demonstrated Verdet constants, which measure the magnitude of rotation at a given magnetic field strength and material thickness, that exceed those found in conventional inorganic crystals. We report herein the thin-film magnetic circular birefringence (MCB) spectra and maximum Verdet constants of several commercially available and newly synthesized phthalocyanine and porphyrin derivatives. Five of these species achieved maximum Verdet constant magnitudes greater than 105 deg T-1 m-1 at wavelengths between 530 and 800 nm. Notably, a newly reported zinc(II) phthalocyanine derivative (ZnPc-OT) reached a Verdet constant of -33 × 104 deg T-1 m-1 at 800 nm, which is among the largest reported for an organic material, especially for an optical-quality thin film. The MCB spectra are consistent with resonance-enhanced Faraday rotation in the region of the Q-band electronic transition common to porphyrin and phthalocyanine derivatives, and the Faraday A-term describes the electronic origin of the magneto-optical activity. Overall, we demonstrate that phthalocyanines and porphyrins are a class of rationally designed magneto-optical materials suitable for applications demanding large Verdet constants and high optical quality.
RESUMEN
We report the synthesis of new carbon-nanomaterial-based metal chelates that enable effective electronic coupling to electrocatalytic transition metals. In particular, multiwalled carbon nanotubes (MWCNTs) and few-layered graphene (FLG) were covalently functionalized by a microwave-assisted cycloaddition with nitrile oxides to form metal-binding isoxazoline functional groups with high densities. The covalent attachment was evidenced by Raman spectroscopy, and the chemical identity of the surface functional groups was confirmed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The functional carbon nanomaterials effectively chelate precious metals Ir(III), Pt(II), and Ru(III), as well as earth-abundant metals such as Ni(II), to afford materials with metal contents as high as 3.0 atom %. The molecularly dispersed nature of the catalysts was confirmed by X-ray absorption spectroscopy (XAS) and energy-dispersive X-ray spectroscopy (STEM-EDS) elemental mapping. The interplay between the chelate structure on the graphene surface and its metal binding ability has also been investigated by a combination of experimental and computational studies. The defined ligands on the graphene surfaces enable the formation of structurally precise heterogeneous molecular catalysts. The direct attachment of the isoxazoline functional group on the graphene surfaces provides strong electronic coupling between the chelated metal species and the conductive carbon nanomaterial support. We demonstrate that the metal-chelated carbon nanomaterials are effective heterogeneous catalysts in the oxygen evolution reaction with low overpotentials and tunable catalytic activity.