Selective 8-oxo-rG stalling occurs in the catalytic core of polynucleotide phosphorylase (PNPase) during degradation.

RNA oxidation, predominantly through the accumulation of 8-oxo-7,8-dihydroguanosine (8-oxo-rG), represents an important biomarker for cellular oxidative stress. Polynucleotide phosphorylase (PNPase) is a 3'-5' exoribonuclease that has been shown to preferentially recognize 8-oxo-rG-containing RNA and protect Escherichia coli cells from oxidative stress. However, the impact of 8-oxo-rG on PNPase-mediated RNA degradation has not been studied. Here, we show that the presence of 8-oxo-rG in RNA leads to catalytic stalling of E. coli PNPase through in vitro RNA degradation experiments and electrophoretic analysis. We also link this stalling to the active site of the enzyme through resolution of single-particle cryo-EM structures for PNPase in complex with singly or doubly oxidized RNA oligonucleotides. Following identification of Arg399 as a key residue in recognition of both single and sequential 8-oxo-rG nucleotides, we perform follow-up in vitro analysis to confirm the importance of this residue in 8-oxo-rG-specific PNPase stalling. Finally, we investigate the effects of mutations to active site residues implicated in 8-oxo-rG binding through E. coli cell growth experiments under H2O2-induced oxidative stress. Specifically, Arg399 mutations show significant effects on cell growth under oxidative stress. Overall, we demonstrate that 8-oxo-rG-specific stalling of PNPase is relevant to bacterial survival under oxidative stress and speculate that this enzyme might associate with other cellular factors to mediate this stress.

Montmorillonite clay-based sorbents decrease the bioavailability of per- and polyfluoroalkyl substances (PFAS) from soil and their translocation to plants.

Consumption of food and water contaminated with per- and polyfluoroalkyl substances (PFAS) presents a significant risk for human exposure. There is limited data on high affinity sorbents that can be used to reduce the bioavailability of PFAS from soil and translocation to plants and garden produce. To address this need, montmorillonite clay was amended with the nutrients carnitine and choline to increase the hydrophobicity of the sorbent and the interlayer spacing. In this study, the binding of PFOA (perfluorooctanoic acid) and PFOS (perfluorooctanesulfonic acid) to parent and amended clays was characterized. Isothermal analyses were conducted at pH 7 and ambient temperature to simulate environmentally-relevant conditions. The data for all tested sorbents fit the Langmuir model indicating saturable binding sites with high capacities and affinities under neutral conditions. Amended montmorillonite clays had increased capacities for PFOA and PFOS (0.51-0.71 mol kg-1) compared to the parent clay (0.37-0.49 mol kg-1). Molecular dynamics (MD) simulations suggested that hydrophobic and electrostatic interactions at the terminal fluorinated carbon chains of PFAS compounds were major modes of surface interaction. The safety and efficacy of the clays were confirmed in a living organism (Lemna minor), where clays (at 0.1% inclusion) allowed for increased growth compared to PFOA and PFOS controls (p ≤ 0.01). Importantly, soil studies showed that 2% sorbent inclusion could significantly reduce PFAS bioavailability from soil (up to 74%). Studies in plants demonstrated that inclusion of 2% sorbent significantly reduced PFAS residues in cucumber plants (p ≤ 0.05). These results suggest that nutrient-amended clays could be included in soil to decrease PFAS bioavailability and translocation of PFAS to plants.

Modification of a Single Atom Affects the Physical Properties of Double Fluorinated Fmoc-Phe Derivatives.

Supramolecular hydrogels formed by the self-assembly of amino-acid based gelators are receiving increasing attention from the fields of biomedicine and material science. Self-assembled systems exhibit well-ordered functional architectures and unique physicochemical properties. However, the control over the kinetics and mechanical properties of the end-products remains puzzling. A minimal alteration of the chemical environment could cause a significant impact. In this context, we report the effects of modifying the position of a single atom on the properties and kinetics of the self-assembly process. A combination of experimental and computational methods, used to investigate double-fluorinated Fmoc-Phe derivatives, Fmoc-3,4F-Phe and Fmoc-3,5F-Phe, reveals the unique effects of modifying the position of a single fluorine on the self-assembly process, and the physical properties of the product. The presence of significant physical and morphological differences between the two derivatives was verified by molecular-dynamics simulations. Analysis of the spontaneous phase-transition of both building blocks, as well as crystal X-ray diffraction to determine the molecular structure of Fmoc-3,4F-Phe, are in good agreement with known changes in the Phe fluorination pattern and highlight the effect of a single atom position on the self-assembly process. These findings prove that fluorination is an effective strategy to influence supramolecular organization on the nanoscale. Moreover, we believe that a deep understanding of the self-assembly process may provide fundamental insights that will facilitate the development of optimal amino-acid-based low-molecular-weight hydrogelators for a wide range of applications.

Self-Assembled Peptide Nano-Superstructure towards Enzyme Mimicking Hydrolysis.

The structural arrangement of amino acid residues in native enzymes underlies their remarkable catalytic properties, thus providing a notable point of reference for designing potent yet simple biomimetic catalysts. Herein, we describe a minimalistic approach to construct a dipeptide-based nano-superstructure with enzyme-like activity. The self-assembled biocatalyst comprises one peptide as a single building block, readily synthesized from histidine. Through coordination with zinc ion, the peptide self-assembly procedure allows the formation of supramolecular ß-sheet ordered nanocrystals, which can be used as basic units to further construct higher-order superstructure. As a result, remarkable hydrolysis activity and enduring stability are demonstrated. Our work exemplifies the use of a bioinspired supramolecular assembly approach to develop next-generation biocatalysts for biotechnological applications.

Molecular Mechanism for Attractant Signaling to DHMA by E. coli Tsr.

The attractant chemotaxis response of Escherichia coli to norepinephrine requires that it be converted to 3,4-dihydroxymandelic acid (DHMA) by the monoamine oxidase TynA and the aromatic aldehyde dehydrogenase FeaB. DHMA is sensed by the serine chemoreceptor Tsr, and the attractant response requires that at least one subunit of the periplasmic domain of the Tsr homodimer (pTsr) has an intact serine-binding site. DHMA that is generated in vivo by E. coli is expected to be a racemic mixture of the (R) and (S) enantiomers, so it has been unclear whether one or both chiral forms are active. Here, we used a combination of state-of-the-art tools in molecular docking and simulations, including an in-house simulation-based docking protocol, to investigate the binding properties of (R)-DHMA and (S)-DHMA to E. coli pTsr. Our studies computationally predicted that (R)-DHMA should promote a stronger attractant response than (S)-DHMA because of a consistently greater-magnitude piston-like pushdown of the pTsr α-helix 4 toward the membrane upon binding of (R)-DHMA than upon binding of (S)-DHMA. This displacement is caused primarily by interaction of DHMA with Tsr residue Thr156, which has been shown by genetic studies to be critical for the attractant response to L-serine and DHMA. These findings led us to separate the two chiral species and test their effectiveness as chemoattractants. Both the tethered cell and motility migration coefficient assays validated the prediction that (R)-DHMA is a stronger attractant than (S)-DHMA. Our study demonstrates that refined computational docking and simulation studies combined with experiments can be used to investigate situations in which subtle differences between ligands may lead to diverse chemotactic responses.

Enhanced Fluorescence for Bioassembly by Environment-Switching Doping of Metal Ions.

The self-assembly of cyclodipeptides composed of natural aromatic amino acids into supramolecular structures of diverse morphologies with intrinsic emissions in the visible light region is demonstrated. The assembly process can be halted at the initial oligomerization by coordination with zinc ions, with the most prominent effect observed for cyclo-dihistidine (cyclo-HH). This process is mediated by attracting and pulling of the metal ions from the solvent into the peptide environment, rather than by direct interaction in the solvent as commonly accepted, thus forming an "environment-switching" doping mechanism. The doping induces a change of cyclo-HH molecular configurations and leads to the formation of pseudo "core/shell" clusters, comprising peptides and zinc ions organized in ordered conformations partially surrounded by relatively amorphous layers, thus significantly enhancing the emissions and allowing the application of the assemblies for ecofriendly color-converted light emitting diodes. These findings shed light into the very initial coordination procedure and elucidate an alternative mechanism of metal ions doping on biomolecules, thus presenting a promising avenue for integration of the bioorganic world and the optoelectronic field.

Interactions between Curcumin Derivatives and Amyloid-ß Fibrils: Insights from Molecular Dynamics Simulations.

The aggregation of amyloid-ß (Aß) peptides into senile plaques is a hallmark of Alzheimer's disease (AD) and is hypothesized to be the primary cause of AD related neurodegeneration. Previous studies have shown the ability of curcumin to both inhibit the aggregation of Aß peptides into oligomers or fibrils and reduce amyloids in vivo. Despite the promise of curcumin and its derivatives to serve as diagnostic, preventative, and potentially therapeutic AD molecules, the mechanism by which curcumin and its derivatives bind to and inhibit Aß fibrils' formation remains elusive. Here, we investigated curcumin and a set of curcumin derivatives in complex with a hexamer peptide model of the Aß1-42 fibril using nearly exhaustive docking, followed by multi-ns molecular dynamics simulations, to provide atomistic-detail insights into the molecules' binding and inhibitory properties. In the vast majority of the simulations, curcumin and its derivatives remain firmly bound in complex with the fibril through primarily three different principle binding modes, in which the molecules interact with residue domain 17LVFFA21, in line with previous experiments. In a small subset of these simulations, the molecules partly dissociate the outermost peptide of the Aß1-42 fibril by disrupting ß-sheets within the residue domain 12VHHQKLVFF20. A comparison between binding modes leading or not leading to partial dissociation of the outermost peptide suggests that the latter is attributed to a few subtle key structural and energetic interaction-based differences. Interestingly, partial dissociation appears to be either an outcome of high affinity interactions or a cause leading to high affinity interactions between the molecules and the fibril, which could partly serve as a compensation for the energy loss in the fibril due to partial dissociation. In conjunction with this, we suggest a potential inhibition mechanism of Αß1-42 aggregation by the molecules, where the partially dissociated 16KLVFF20 domain of the outermost peptide could either remain unstructured or wrap around to form intramolecular interactions with the same peptide's 29GAIIG33 domain, while the molecules could additionally act as a patch against the external edge of the second outermost peptide's 16KLVFF20 domain. Thereby, individually or concurrently, these could prohibit fibril elongation.

Insights into the interactions of bisphenol and phthalate compounds with unamended and carnitine-amended montmorillonite clays.

Montmorillonite clays could be promising sorbents to mitigate toxic compound exposures. Bisphenols A (BPA) and S (BPS) as well as phthalates, dibutyl phthalate (DBP) and di-2-ethylhexyl phthalate (DEHP), are ubiquitous environmental contaminants linked to adverse health effects. Here, we combined computational and experimental methods to investigate the ability of montmorillonite clays to sorb these compounds. Molecular dynamics simulations predicted that parent, unamended, clay has higher binding propensity for BPA and BPS than for DBP and DEHP; carnitine-amended clay improved BPA and BPS binding, through carnitine simultaneously anchoring to the clay through its quaternary ammonium cation and forming hydrogen bonds with BPA and BPS. Experimental isothermal analysis confirmed that carnitine-amended clay has enhanced BPA binding capacity, affinity and enthalpy. Our studies demonstrate how computational and experimental methods, combined, can characterize clay binding and sorption of toxic compounds, paving the way for future investigation of clays to reduce BPA and BPS exposure.

Isoflavones as Ah Receptor Agonists in Colon-Derived Cell Lines: Structure-Activity Relationships.

Many of the protective responses observed for flavonoids in the gastrointestinal track resemble aryl hydrocarbon receptor (AhR)-mediated effects. Therefore, we examined the structure-activity relationships of isoflavones and isomeric flavone and flavanones as AhR ligands on the basis of their induction of CYP1A1, CYP1B1, and UGT1A1 gene expression in colon cancer Caco2 cells and young adult mouse colonocyte (YAMC) cells. Caco2 cells were significantly more Ah-responsive than YAMC cells, and this was due, in part, to flavonoid-induced cytotoxicity in the latter cell lines. The structure-activity relationships for the flavonoids were complex and both response and cell context specific; however, there was significant variability in the AhR activities of the isomeric substituted isoflavones and flavones. For example, 4',5,7-trihydroxyisoflavone (genistein) was AhR-inactive whereas 4',5,7-trihydroxyflavone (apigenin) induced CYP1A1, CYP1B1, and UGT1A1 in Caco2 cells. In contrast, both 5,7-dihydroxy-4-methoxy substituted isoflavone (biochanin A) and flavone (acacetin) induced all three AhR-responsive genes; 4',5,7-trimethoxyisoflavone was a potent AhR agonist, and the isomeric flavone was AhR-inactive. These results coupled with simulation studies modeling flavonoid interaction within the AhR binding pocket demonstrate that the orientation of the substituted phenyl ring at C-2 (flavones) or C-3 (isoflavones) on the common 4-H-chromen-4-one ring strongly influences the activities of isoflavones and flavones as AhR agonists.

A high-throughput and rapid computational method for screening of RNA post-transcriptional modifications that can be recognized by target proteins.

There are over 150 currently known, highly diverse chemically modified RNAs, which are dynamic, reversible, and can modulate RNA-protein interactions. Yet, little is known about the wealth of such interactions. This can be attributed to the lack of tools that allow the rapid study of all the potential RNA modifications that might mediate RNA-protein interactions. As a promising step toward this direction, here we present a computational protocol for the characterization of interactions between proteins and RNA containing post-transcriptional modifications. Given an RNA-protein complex structure, potential RNA modified ribonucleoside positions, and molecular mechanics parameters for capturing energetics of RNA modifications, our protocol operates in two stages. In the first stage, a decision-making tool, comprising short simulations and interaction energy calculations, performs a fast and efficient search in a high-throughput fashion, through a list of different types of RNA modifications categorized into trees according to their structural and physicochemical properties, and selects a subset of RNA modifications prone to interact with the target protein. In the second stage, RNA modifications that are selected as recognized by the protein are examined in-detail using all-atom simulations and free energy calculations. We implement and experimentally validate this protocol in a test case involving the study of RNA modifications in complex with Escherichia coli (E. coli) protein Polynucleotide Phosphorylase (PNPase), depicting the favorable interaction between 8-oxo-7,8-dihydroguanosine (8-oxoG) RNA modification and PNPase. Further advancement of the protocol can broaden our understanding of protein interactions with all known RNA modifications in several systems.

Elucidating the multi-targeted anti-amyloid activity and enhanced islet amyloid polypeptide binding of ß-wrapins.

ß-wrapins are engineered binding proteins stabilizing the ß-hairpin conformations of amyloidogenic proteins islet amyloid polypeptide (IAPP), amyloid-ß, and α-synuclein, thus inhibiting their amyloid propensity. Here, we use computational and experimental methods to investigate the molecular recognition of IAPP by ß-wrapins. We show that the multi-targeted, IAPP, amyloid-ß, and α-synuclein, binding properties of ß-wrapins originate mainly from optimized interactions between ß-wrapin residues and sets of residues in the three amyloidogenic proteins with similar physicochemical properties. Our results suggest that IAPP is a comparatively promiscuous ß-wrapin target, probably due to the low number of charged residues in the IAPP ß-hairpin motif. The sub-micromolar affinity of ß-wrapin HI18, specifically selected against IAPP, is achieved in part by salt-bridge formation between HI18 residue Glu10 and the IAPP N-terminal residue Lys1, both located in the flexible N-termini of the interacting proteins. Our findings provide insights towards developing novel protein-based single- or multi-targeted therapeutics.

Princeton_TIGRESS 2.0: High refinement consistency and net gains through support vector machines and molecular dynamics in double-blind predictions during the CASP11 experiment.

Protein structure refinement is the challenging problem of operating on any protein structure prediction to improve its accuracy with respect to the native structure in a blind fashion. Although many approaches have been developed and tested during the last four CASP experiments, a majority of the methods continue to degrade models rather than improve them. Princeton_TIGRESS (Khoury et al., Proteins 2014;82:794-814) was developed previously and utilizes separate sampling and selection stages involving Monte Carlo and molecular dynamics simulations and classification using an SVM predictor. The initial implementation was shown to consistently refine protein structures 76% of the time in our own internal benchmarking on CASP 7-10 targets. In this work, we improved the sampling and selection stages and tested the method in blind predictions during CASP11. We added a decomposition of physics-based and hybrid energy functions, as well as a coordinate-free representation of the protein structure through distance-binning Cα-Cα distances to capture fine-grained movements. We performed parameter estimation to optimize the adjustable SVM parameters to maximize precision while balancing sensitivity and specificity across all cross-validated data sets, finding enrichment in our ability to select models from the populations of similar decoys generated for targets in CASPs 7-10. The MD stage was enhanced such that larger structures could be further refined. Among refinement methods that are currently implemented as web-servers, Princeton_TIGRESS 2.0 demonstrated the most consistent and most substantial net refinement in blind predictions during CASP11. The enhanced refinement protocol Princeton_TIGRESS 2.0 is freely available as a web server at http://atlas.engr.tamu.edu/refinement/. Proteins 2017; 85:1078-1098. © 2017 Wiley Periodicals, Inc.

Princeton_TIGRESS: protein geometry refinement using simulations and support vector machines.

Protein structure refinement aims to perform a set of operations given a predicted structure to improve model quality and accuracy with respect to the native in a blind fashion. Despite the numerous computational approaches to the protein refinement problem reported in the previous three CASPs, an overwhelming majority of methods degrade models rather than improve them. We initially developed a method tested using blind predictions during CASP10 which was officially ranked in 5th place among all methods in the refinement category. Here, we present Princeton_TIGRESS, which when benchmarked on all CASP 7,8,9, and 10 refinement targets, simultaneously increased GDT_TS 76% of the time with an average improvement of 0.83 GDT_TS points per structure. The method was additionally benchmarked on models produced by top performing three-dimensional structure prediction servers during CASP10. The robustness of the Princeton_TIGRESS protocol was also tested for different random seeds. We make the Princeton_TIGRESS refinement protocol freely available as a web server at http://atlas.princeton.edu/refinement. Using this protocol, one can consistently refine a prediction to help bridge the gap between a predicted structure and the actual native structure.

Elucidating a key component of cancer metastasis: CXCL12 (SDF-1α) binding to CXCR4.

The chemotactic signaling induced by the binding of chemokine CXCL12 (SDF-1α) to chemokine receptor CXCR4 is of significant biological importance and is a potential therapeutic axis against HIV-1. However, as CXCR4 is overexpressed in certain cancer cells, the CXCL12:CXCR4 signaling is involved in tumor metastasis, progression, angiogenesis, and survival. Motivated by the pivotal role of the CXCL12:CXCR4 axis in cancer, we employed a comprehensive set of computational tools, predominantly based on free energy calculations and molecular dynamics simulations, to obtain insights into the molecular recognition of CXCR4 by CXCL12. We report, what is to our knowledge, the first computationally derived CXCL12:CXCR4 complex structure which is in remarkable agreement with experimental findings and sheds light into the functional role of CXCL12 and CXCR4 residues which are associated with binding and signaling. Our results reveal that the CXCL12 N-terminal domain is firmly bound within the CXCR4 transmembrane domain, and the central 24-50 residue domain of CXCL12 interacts with the upper N-terminal domain of CXCR4. The stability of the CXCL12:CXCR4 complex structure is attributed to an abundance of nonpolar and polar intermolecular interactions, including salt bridges formed between positively charged CXCL12 residues and negatively charged CXCR4 residues. The success of the computational protocol can mainly be attributed to the nearly exhaustive docking conformational search, as well as the heterogeneous dielectric implicit water-membrane-water model used to simulate and select the optimum conformations. We also recently utilized this protocol to elucidate the binding of an HIV-1 gp120 V3 loop in complex with CXCR4, and a comparison between the molecular recognition of CXCR4 by CXCL12 and the HIV-1 gp120 V3 loop shows that both CXCL12 and the HIV-1 gp120 V3 loop share the same CXCR4 binding pocket, as they mostly interact with the same CXCR4 residues.

Green-engineered clay- and carbon-based composite materials for the adsorption of benzene from air.

Benzene is a carcinogenic volatile organic compound (VOC) that is ubiquitously detected in enclosed spaces due to emissions from cooking activities, building materials, and cleaning products. To remove benzene and other VOCs from indoor air and protect public health, traditional fabric filters have been modified to contain activated carbons to enhance the filtration efficacy. In this study, composites derived from natural clay minerals and activated carbon were individually green-engineered with chlorophylls and were attached to the surface of filter materials. These systems were assessed for their adsorption of benzene from air using in vitro and in silico methods. Isothermal, thermodynamic, and kinetic experiments indicated that all green-engineered composites had improved binding profiles for benzene, as demonstrated by increased binding affinities (Kf ≥ 900 vs 472) and lower values of Gibbs free energy (ΔG = -16.8 vs -15.2) compared to activated carbon. Adsorption of benzene to all composites was achieved quickly (< 30 min), and the green-engineered composites also showed low levels of desorption (≤ 25%). While free chlorophyll is known to be photosensitive, chlorophylls in the green-engineered composites showed photostability and maintained high binding rates (≥ 70%). Additionally, the in silico simulations demonstrated the significant contribution of chlorophyll for the overall binding of benzene in clay systems and that chlorophyll could contribute to benzene binding in the carbon-based systems. Together, these studies indicated that novel, green-engineered composite materials can be effective filter sorbents to enhance the removal of benzene from air.

Adsorption and removal of polystyrene nanoplastics from water by green-engineered clays.

Human exposure to micro- and nanoplastics (MNPs) commonly occurs through the consumption of contaminated drinking water. Among these, polystyrene (PS) is well-characterized and is one of the most abundant MNPs, accounting for 10 % of total plastics. Previous studies have focused on carbonaceous materials to remove MNPs by filtration, but most of the work has involved microplastics since nanoplastics (NPs) are smaller in size and more difficult to measure and remove. To address this need, green-engineered chlorophyll-amended sodium and calcium montmorillonites (SMCH and CMCH) were tested for their ability to bind and detoxify parent and fluorescently labeled PSNP using in vitro, in silico, and in vivo assays. In vitro dosimetry, isothermal analyses, thermodynamics, and adsorption/desorption kinetic models demonstrated 1) high binding capacities (173-190 g/kg), 2) high affinities (103), and 3) chemisorption as suggested by low desorption (≤42 %) and high Gibbs free energy and enthalpy (>|-20| kJ/mol) in the Langmuir and pseudo-second-order models. Computational dynamics simulations for 30 and 40 monomeric units of PSNP depicted that chlorophyll amendments increased the binding percentage and contributed to the sustained binding. Also, 64 % of PSNP bind to both the head and tail of chlorophyll aggregates, rather than the head or tail only. Fluorescent PSNP at 100 nm and 30 nm that were exposed to Hydra vulgaris showed concentration-dependent toxicity at 20-100 µg/mL. Importantly, the inclusion of 0.05-0.3 % CMCH and SMCH significantly (p ≤ 0.01) and dose-dependently reduced PSNP toxicity in morphological changes and feeding rate. The bioassay validated the in vitro and in silico predictions about adsorption efficacy and mechanisms and suggested that CMCH and SMCH are efficacious binders for PSNP in water.

ß-Lactoglobulin Enhances Clay and Activated Carbon Binding and Protection Properties for Cadmium and Lead.

The removal of heavy metals from wastewater remains a challenge due to the limitations of current remediation methods. This study aims to develop multicomponent composites as inexpensive and environmentally friendly sorbents with enhanced capture of cadmium (Cd) and lead (Pb). The composites are based on calcium montmorillonite (CM) and activated carbon (AC) because of their proven effectiveness as sorbents for diverse toxins in environmental settings. In this study, we used a combination of computational and experimental methods to delineate that ß-lactoglobulin enhances CM and AC binding and protection properties for Cd and Pb. Modeling and molecular dynamics simulations investigated the formation of material systems formed by CM and AC in complex with ß-lactoglobulin and predicted their capacity to bind heavy metal ions at neutral pH conditions. Our simulations suggest that the enhanced binding properties of the material systems are attributed to the presence of several binding pockets formed by ß-lactoglobulin for the two heavy metal ions. At neutral pH conditions, divalent Cd and Pb shared comparable binding propensities in all material systems, with the former being consistently higher than the latter. To validate the interactions depicted in simulations, two ecotoxicological models (L. minor and H. vulgaris) were exposed to Cd, Pb, and a mixture of the two. The inclusion of CM-lactoglobulin (ß-lactoglobulin amended CM) and AC-lactoglobulin (ß-lactoglobulin amended AC) at 0.05-0.2% efficiently and dose-dependently reduced the severe toxicity of metals and increased the growth parameters. This high efficacy of protection shown in the ecotoxicological models may result from the numerous possible interaction pockets of the ß-lactoglobulin-amended materials depicted in simulations. The ecotoxicological models support the agreement with computations. This study serves as a proof of concept on how computations in tandem with experiments can be used in the design of multicomponent clay- and carbon-based sorbent amended systems with augmented functionalities for particular toxins.

Co-Assembly of Cancer Drugs with Cyclo-HH Peptides: Insights from Simulations and Experiments.

Peptide-based nanomaterials can serve as promising drug delivery agents, facilitating the release of active pharmaceutical ingredients while reducing the risk of adverse reactions. We previously demonstrated that Cyclo-Histidine-Histidine (Cyclo-HH), co-assembled with cancer drug Epirubicin, zinc, and nitrate ions, can constitute an attractive drug delivery system, combining drug self-encapsulation, enhanced fluorescence, and the ability to transport the drug into cells. Here, we investigated both computationally and experimentally whether Cyclo-HH could co-assemble, in the presence of zinc and nitrate ions, with other cancer drugs with different physicochemical properties. Our studies indicated that Methotrexate, in addition to Epirubicin and its epimer Doxorubicin, and to a lesser extent Mitomycin-C and 5-Fluorouracil, have the capacity to co-assemble with Cyclo-HH, zinc, and nitrate ions, while a significantly lower propensity was observed for Cisplatin. Epirubicin, Doxorubicin, and Methorexate showed improved drug encapsulation and drug release properties, compared to Mitomycin-C and 5-Fluorouracil. We demonstrated the biocompatibility of the co-assembled systems, as well as their ability to intracellularly release the drugs, particularly for Epirubicin, Doxorubicin, and Methorexate. Zinc and nitrate were shown to be important in the co-assembly, coordinating with drugs and/or Cyclo-HH, thereby enabling drug-peptide as well as drug-drug interactions in successfully formed nanocarriers. The insights could be used in the future design of advanced cancer therapeutic systems with improved properties.

Sequence-based identification of amyloidogenic ß-hairpins reveals a prostatic acid phosphatase fragment promoting semen amyloid formation.

ß-Structure-rich amyloid fibrils are hallmarks of several diseases, including Alzheimer's (AD), Parkinson's (PD), and type 2 diabetes (T2D). While amyloid fibrils typically consist of parallel ß-sheets, the anti-parallel ß-hairpin is a structural motif accessible to amyloidogenic proteins in their monomeric and oligomeric states. Here, to investigate implications of ß-hairpins in amyloid formation, potential ß-hairpin-forming amyloidogenic segments in the human proteome were predicted based on sequence similarity with ß-hairpins previously observed in Aß, α-synuclein, and islet amyloid polypeptide, amyloidogenic proteins associated with AD, PD, and T2D, respectively. These three ß-hairpins, established upon binding to the engineered binding protein ß-wrapin AS10, are characterized by proximity of two sequence segments rich in hydrophobic and aromatic amino acids, with high ß-aggregation scores according to the TANGO algorithm. Using these criteria, 2505 potential ß-hairpin-forming amyloidogenic segments in 2098 human proteins were identified. Characterization of a test set of eight protein segments showed that seven assembled into Thioflavin T-positive aggregates and four formed ß-hairpins in complex with AS10 according to NMR. One of those is a segment of prostatic acid phosphatase (PAP) comprising amino acids 185-208. PAP is naturally cleaved into fragments, including PAP(248-286) which forms functional amyloid in semen. We find that PAP(185-208) strongly decreases the protein concentrations required for fibril formation of PAP(248-286) and of another semen amyloid peptide, SEM1(86-107), indicating that it promotes nucleation of semen amyloids. In conclusion, ß-hairpin-forming amyloidogenic protein segments could be identified in the human proteome with potential roles in functional or disease-related amyloid formation.