RESUMEN
Prediction of water and solute migration in natural clay-based materials requires a detailed understanding of the roles played by different porosity types (around or inside clay particles) on the overall transfer process. For smectite, a reference material for the design of migration models, this discrimination is complex because of osmotic swelling of the structure under water-saturated conditions. Diffusion experiments with a water tracer (HDO) were conducted on 0.1-0.2, 1-2, and 10-20 µm size fractions of Na-vermiculite, a swelling clay mineral with no osmotic swelling. Results obtained for the two finest fractions suggest that osmotic swelling and the associated impact on pore structure are responsible for the low De values reported in the literature for smectite compared to those of vermiculite. When considering only interparticle porosity, De values for vermiculite are similar to those reported for nonporous grains (Na-kaolinite and Na-illite). This indicates that interparticle porosity has a primary effect on the overall water diffusion process, whereas interlayer porosity is shown to imply a small proportion of HDO adsorption. This study provides evidence that vermiculite is a promising reference mineral for the understanding of the roles played by pore structure and mineral-water interaction in the transport properties of water in claystones and for associated refinement of dual-porosity diffusion models.
Asunto(s)
Arcilla , Agua , Silicatos de Aluminio , Difusión , Minerales , PorosidadRESUMEN
The Abinky formation, composed of analcimolites (i.e., rocks with <70 wt% analcime), underlies Tchirezrine II, which hosts the Imouraren (Niger) uranium deposit. A potential mining project is under consideration to recover U by in situ acid leaching. Analcimolites are uncommon rocks, and assessing their ion-exchange properties is the first step to understand and predict the mobility of aqueous species in these formations. The objective of this study is then to understand the link between the Cation Exchange Capacities (CEC) of analcimolites as a function of their analcime content and associated crystal chemistry. Mineral quantification was performed by Rietveld refinement constrained by local chemical analysis with scanning electron microscopy coupled with Energy Dispersive Spectrometry. CEC were obtained at neutral pH by performing NH4+-for-Na+ exchange (CECNa/NH4), and Na+/H+ ion exchange experiments were performed with 4 analcimolites. Results showed that the analcime crystal chemistry deduced from Rietveld refinement was in good agreement with that obtained from SEM analysis (1.99 < Si/Al < 2.53). The results showed that all samples had a positive correlation between CECNa/NH4 and analcime content until ~30 meq/100 g for a sample containing ~85wt%Riet. of analcime, and that ~6 % of the total amounts of Na+ present in the analcime could be exchanged by NH4+ and H+. Based on Si and Al aqueous measurements, results showed that exchange with Na+ is the main process consuming H+ during Na+/H+ exchange when pH > 3.5. These experimental data were then interpreted by considering a single site equal to the CECNa/NH4 value, specific for each analcimolite, and a selectivity coefficient equal to log KNa/H = 1.3 (Gaines Thomas convention) being equal for all samples investigated. Finally, these data were used to assess the role played by Na+/H+ exchange in the pH evolution of the pore water of an analcime-rich rock subjected to dynamic acidification.
RESUMEN
Most of the available data on diffusion in natural clayey rocks consider tracer diffusion in the absence of a salinity gradient despite the fact that such gradients are frequently found in natural and engineered subsurface environments. To assess the role of such gradients on the diffusion properties of clayey materials, through-diffusion experiments were carried out in the presence and absence of a salinity gradient using salt-diffusion and radioisotope tracer techniques. The experiments were carried out with vermiculite samples that contained equal proportions of interparticle and interlayer porosities so as to assess also the role played by the two types of porosities on the diffusion of water and ions. Data were interpreted using both a classical Fickian diffusion model and with a reactive transport code, CrunchClay that can handle multi-porosity diffusion processes in the presence of charged surfaces. By combining experimental and simulated data, we demonstrated that (i) the flux of water diffusing through vermiculite interlayer porosity was minor compared to that diffusing through the interparticle porosity, and (ii) a model considering at least three types of porous volumes (interlayer, interparticle diffuse layer, and bulk interparticle) was necessary to reproduce consistently the variations of neutral and charged species diffusion as a function of salinity gradient conditions.
Asunto(s)
Silicatos de Aluminio , Arcilla , Salinidad , Porosidad , Difusión , Arcilla/química , Silicatos de Aluminio/química , Agua/química , Iones/química , Modelos TeóricosRESUMEN
In this study, new experimental data for the adsorption of lead onto a swelling clay mineral with a tetrahedral charge (beidellite) at the ultratrace level (<10-10 M) are presented. The data were interpreted using an ion-exchange multisite model that considers the sorption of major cations (including H+), which always compete with trace elements for sorption onto mineral surfaces in natural environments. The ability of the proposed model to predict experimental Kd values under various conditions of ionic strength (fixed by NaCl solutions) and aqueous cation compositions (including Pb2+ and PbCl+) was tested. The proposed model was applied to experimental data previously published for other types of swelling clay minerals, and the results were compared with the results obtained using previously published models. The preferential adsorption of chloride ion pairs, as well as the effect of the swelling clay crystal chemistry on lead adsorption, were assessed. Finally, the selective adsorption behavior of 226Ra compared to 210Pb was demonstrated, which has implications for the study of many environmental processes using isotope partitioning.
Asunto(s)
Plomo , Silicatos , Arcilla , Silicatos/química , Minerales , Cationes , Adsorción , Concentración de Iones de HidrógenoRESUMEN
Most of the thermodynamic models available in the literature describing the speciation of the calcite surface do not predict a significant concentration of sorbed Ca(II), whereas previous electrokinetics studies clearly show that Ca(2+) is the main cation determining the potential of the calcite surface. This study proposes a new thermodynamic model based on ion-exchange theory that is able to describe the reversible sorption of Ca(2+) on calcite. To constrain the model, concentrations of Ca(II) sorbed reversibly on the mineral surface were obtained as a function of pH. Such experimental data were obtained using solutions in equilibrium with both calcite and fixed p(CO2(g)) values (from 10(-5) to 10(-2) atm). The concentration of (de)sorbed Ca(II) is almost constant in the [7-9.5] pH range, having a value of approximately 1.2 × 10(-6) ± 0.4 × 10(-7) eq·g(-1). Such a value agrees with total sorption site densities that were previously calculated by crystallography and is used to obtain a selectivity coefficient between H(+) and Ca(2+) species by fitting the experimental data. Then, selectivity coefficients between H(+) and different metallic cations (Zn(2+), Cd(2+), Pb(2+)) that are able to accurately describe previously published data are proposed. Finally, the model is used to predict the contribution of calcite in the overall sorption of Cd(II) on a natural and complex solid (calcareous aquifer sand).
Asunto(s)
Carbonato de Calcio/química , Cationes Bivalentes/aislamiento & purificación , Metales/aislamiento & purificación , Adsorción , Cadmio/aislamiento & purificación , Calcio/aislamiento & purificación , Carbonatos/química , Intercambio Iónico , Plomo/aislamiento & purificación , Modelos Químicos , Propiedades de Superficie , Termodinámica , Zinc/aislamiento & purificaciónRESUMEN
Major uranium (U) deposits worldwide are exploited by acid leaching, known as 'in-situ recovery' (ISR). ISR involves the injection of an acid fluid into ore-bearing aquifers and the pumping of the resulting metal-containing solution through cation exchange columns for the recovery of dissolved U. Rehabilitation of ISR-impacted aquifers could be achieved through natural attenuation, or via biostimulation of autochthonous heterotrophic microorganisms due to the associated acid neutralization and trace metal immobilization. In this study, we analyzed the capacity of pristine aquifer sediments impacted by diluted ISR fluids to buffer pH and immobilize U. The experimental setup consisted of glass columns, filled with sediment from a U ore-bearing aquifer, through which diluted ISR fluids were flowed continuously. The ISR solution was obtained from ISR mining operations at the Muyunkum and Tortkuduk deposits in Kazakhstan. Following this initial phase, columns were biostimulated with a mix of molasses, yeast extract and glycerol to stimulate the growth of autochthonous heterotrophic communities. Experimental results showed that this amendment efficiently promoted the activity of acid-tolerant bacterial guilds, with pH values rising from 4.8 to 6.5-7.0 at the outlet of the stimulated columns. The reduction of sulfate, nitrate, and metals as well as dissimilatory nitrate reduction to ammonia induced the rise in pH values, in agreement with geochemical modelling results. Biostimulation efficiently promoted the complete immobilization of U, with the accumulation of up to 3343 ppm in the first few centimeters of the columns. Synchrotron analysis and SEM-EDS revealed that up to 60% of the injected hexavalent U was immobilized as tetravalent non-crystalline U onto bacterial cell surfaces. 16S rDNA amplicon analysis and qPCR data suggested a predominant role played for members of the Phylum Firmicutes (from the genera Clostridium, Pelosinus and Desulfosporosinus) in biological U reduction and immobilization.
Asunto(s)
Agua Subterránea , Uranio , Contaminantes Radiactivos del Agua , Agua Subterránea/química , Minería , Nitratos/análisis , Uranio/análisis , Contaminantes Radiactivos del Agua/análisisRESUMEN
The orientation and organization of molecular guests within the interlayer of clay minerals control the reactivity and performance of tailored organo-clay materials. Such a detailed investigation of hybrid structure on the molecular scale is usually provided by computational methods with limited experimental validation. In this study, polarized attenuated total reflection infrared spectroscopy was used to extract quantitative orientation measurements of montmorillonite particles. The validity of the evanescent electric field amplitude calculations necessary to derive the order parameter was critically evaluated to propose a methodology for determining the orientation of the normal to the clay layer relative to a reference axis, enabling comparison with the results obtained from X-ray scattering experiments and molecular dynamic simulations. Subsequently, the orientation of the interlayer water dipole and surface hydroxyls with respect to the normal of the clay layer was experimentally determined, showing good agreement with molecular simulations. This methodology may provide quantitative insights into the molecular-level description of interfacial processes between organic molecules and clay minerals.
RESUMEN
The role of the preferential orientation of clay platelets on the properties of a wide range of natural and engineered clay-rich media is well established. However, a reference function for describing the orientation of clay platelets in these different materials is still lacking. Here, we conducted a systematic study on a large panel of laboratory-made samples, including different clay types or preparation methods. By analyzing the orientation distribution functions obtained by X-ray scattering, we identified a unique signature for the preferred orientation of clay platelets and determined an associated reference orientation function using the maximum-entropy method. This new orientation distribution function is validated for a large set of engineered clay materials and for representative natural clay-rich rocks. This reference function has many potential applications where consideration of preferred orientation is required, including better long-term prediction of water and solute transfer or improved designs for new generations of innovative materials.
RESUMEN
The anisotropic properties of clay-rich porous media have significant impact on the directional dependence of fluids migration in environmental and engineering sciences. This anisotropy, linked to the preferential orientation of flat anisometric clay minerals particles, is studied here on the basis of the simulation of three-dimensional packings of non-interacting disks, using a sequential deposition algorithm under a gravitational field. Simulations show that the obtained porosities fall onto a single master curve when plotted against the anisotropy value. This finding is consistent with results from sedimentation experiments using polytetrafluoroethylene (PTFE) disks and subsequent extraction of particle anisotropy through X-ray microtomography. Further geometrical analyses of computed porous media highlight that both particle orientation and particle aggregation are responsible of the evolution of porosity as a function of anisotropy. Moreover, morphological analysis of the porous media using chord length measurements shows that the anisotropy of the pore and solid networks can be correlated with particle orientation. These results indicate that computed porous media, mimicking the organization of clay minerals, can be used to shed light on the anisotropic properties of fluid transfer in clay-based materials.
RESUMEN
1H NMR pulsed gradient spin echo attenuation and water density profile analysis by magnetic resonance imaging are both used to determine the mobility of water molecules confined within a porous network of compacted kaolinite clay sample (total porosity of â¼50%). These two complementary experimental procedures efficiently probe molecular diffusion within time scales varying between milliseconds and few hours, filling the gap between the time scale of diffusion dynamics measured by traditional quasi elastic neutron scattering and through-diffusion methods. Furthermore, magnetic resonance imaging is a nondestructive investigation tool that is able to assess the effect of the local structure on the macroscopic mobility of the diffusing probe.
RESUMEN
Radioactive caesium pollution resulting from Fukushima Dai-ichi and Chernobyl nuclear plant accidents involves strong interactions between Cs+ and clays, especially vermiculite-type minerals. In acidic soil environments, such as in Fukushima area, vermiculite is subjected to weathering processes, resulting in aluminization. The crystal structure of aluminized clays and its implications for Cs+ mobility in soils remain poorly understood due to the mixture of these minerals with other clays and organic matter. We performed acidic weathering of a vermiculite to mimic the aluminization process in soils. Combination of structure analysis and Cs+ extractability measurements show that the increase of aluminization is accompanied by an increase in Cs+ mobility. Crystal structure model for aluminized vermiculite is based on the interstratification of unaltered vermiculite layers and aluminized layers within the same particle. Cs+ in vermiculite layers is poorly mobile, while the extractability of Cs+ is greatly enhanced in aluminized layers. The overall reactivity of the weathered clay (cation exchange capacity, Cs+ mobility) is then governed by the relative abundance of the two types of layers. The proposed layer model for aluminized vermiculite with two coexisting populations of caesium is of prime importance for predicting the fate of caesium in contaminated soil environments.
Asunto(s)
Silicatos de Aluminio/química , Radioisótopos de Cesio/análisis , Minerales/análisis , Contaminantes Radiactivos del Suelo/análisis , Suelo/química , ArcillaRESUMEN
The aim of this work was to obtain an in-depth understanding of the U(VI) adsorption mechanism over amino-functionalized mesoporous silica SBA-15 and highlights its high efficiency in aqueous media for U(VI) removal and preconcentration. The samples were synthesized and functionalized by both grafting and co-condensation methods, using different alkyl-substituted amine groups and were characterized using X-ray diffraction, N2 physisorption, Fourier transform infrared spectroscopy, and elemental C-H-N-S analyses. The properties for U(VI) adsorption were evaluated under discontinuous conditions, with the determination of the effect of several parameters (initial pH, contact time, initial U(VI) concentration, functionalization method, and organic moiety composition). U(VI) adsorption over grafted materials reached equilibrium at around 30 min, with a maximum adsorption capacity of 573 mgU·gads-1 for the most efficient material at its optimal adsorption pH (equal to 6) at 20 °C. Functionalized materials by grafting exhibit better adsorption capacities than co-condensed samples because of higher function surface density and function availability. U(VI) adsorption mechanisms were also studied by measuring the electrophoretic mobilities of the particles, aqueous U(VI) speciation, in situ attenuated total reflection infrared and Raman spectroscopies, and transmission electron microscopy analysis. U(VI) adsorption occurred through the formation of an inner sphere complex. The localization of adsorbed U(VI) has also been determined inside of the mesopores, with the formation of several particles on the nanometer scale, in the size of U-hydroxy phases. Besides, the study of the reusability of amino-functionalized SBA-15 by applying adsorption-desorption cycles was also conducted. The adsorption capacity of the material remains stable for at least four adsorption-desorption cycles without any noticeable capacity decrease.
RESUMEN
Natural kaolinites often have a permanent charge due to mineralogical impurities preventing to link directly the morphology of the kaolinite particle to a selectivity coefficient between two cations for edge sites. In this study, kaolinites with no permanent charge were hydrothermally synthesized under different physicochemical conditions to obtain various morphologies (hexagon-shaped, more or less anisotropic). Na(+) and H(+) were chosen as the sorbed cations due to their ubiquitous presence in natural waters. For synthetic kaolinites for which no swelling layer was detected, an experimental sorption isotherm between Na(+) and H(+) was obtained. Data were interpreted using a surface complexation model, containing no electrostatic term, by considering the specific surfaces of lateral sites and sorption site density identified by crystallography for the different faces presented in the samples ((010), (110), (1-10)). Selectivity coefficients between Na(+) and H(+) for all lateral sites characterizing a given morphology were calculated and validated in the [4-10] pH range, corresponding to the pH range for which dissolution can be considered negligible. The results showed that the Na(+)/H(+) selectivity coefficient depends strongly on the particle morphology and that the sorption properties of kaolinites cannot be obtained with good accuracy without a fine knowledge of the morphology of the particles.
Asunto(s)
Hidrógeno/química , Caolín/química , Dióxido de Silicio/química , Sodio/química , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Microscopía Electrónica de Rastreo , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Termodinámica , Difracción de Rayos XRESUMEN
Three particle size fractions of sodium-saturated vermiculite (10-20, 1-2 and 0.1-0.2 µm), differing only in their ratios of external-to-total sorption sites, were used to probe the nature of the sites involved in desorption of cesium ions. The sorption was investigated for initial aqueous concentrations of cesium ranging from 5.6×10(-4) to 1.3×10(-2) mol/L, and the cesium desorption was probed by exchange with ammonium ions. The results showed that (1) the amounts of desorbed cesium were strongly dependent on the particle size for a given initial aqueous cesium concentration and (2) the amounts of desorbed cations (Na(+) and Cs(+)) strongly decreased with increasing initial cesium aqueous concentration, irrespective of the particle size investigated. Quantitative analysis of these results suggested that cesium ions sorbed on external (edge+basal) sorption sites can be desorbed by ammonium ions. As a contrast, most of cesium ions sorbed on interlayer sites remain fixed due to the collapse of the structure under aqueous conditions. This study provides important information, such as the nature of the sites involved in the exchange process, when the thermodynamic formalism is considered to describe the ion-exchange process involving cesium and high-charge swelling clay minerals in polluted soil environments.
RESUMEN
Swelling clay minerals play a key role in the control of water and pollutant migration in natural media such as soils. Moreover, swelling clay particles' orientational properties in porous media have significant implications for the directional dependence of fluid transfer. Herein we investigate the ability to mimic the organization of particles in natural swelling-clay porous media using a three-dimensional sequential particle deposition procedure [D. Coelho, J.-F. Thovert, and P. M. Adler, Phys. Rev. E 55, 1959 (1997)]. The algorithm considered is first used to simulate disk packings. Porosities of disk packings fall onto a single master curve when plotted against the orientational scalar order parameter value. This relation is used to validate the algorithm used in comparison with existing ones. The ellipticity degree of the particles is shown to have a negligible effect on the packing porosity for ratios â(a)/â(b) less than 1.5, whereas a significant increase in porosity is obtained for higher values. The effect of the distribution of the geometrical parameters (size, aspect ratio, and ellipticity degree) of particles on the final packing properties is also investigated. Finally, the algorithm is used to simulate particle packings for three size fractions of natural swelling-clay mineral powders. Calculated data regarding the distribution of the geometrical parameters and orientation of particles in porous media are successfully compared with experimental data obtained for the same samples. The results indicate that the obtained virtual porous media can be considered representative of natural samples and can be used to extract properties difficult to obtain experimentally, such as the anisotropic features of pore and solid phases in a system.