Root canal cleanliness and debris extrusion following retreatment of thermoplastic injection technique and bioceramic-based root canal sealer.

OBJECTIVES: To evaluate the amount of apically extruded debris and to determine the remaining filling material on the root canal walls by microcomputed tomography (micro-CT), following the root canal retreatment of root canals filled with different obturation techniques (single cone technique, thermoplasticised injection technique) and the different root canal sealers [bioceramic-based, epoxy resin-based root canal sealer]. MATERIALS AND METHODS: 60 single rooted human premolar teeth were prepared with the ProTaper Gold system (Dentsply Maillefer) up to the F4 file and the samples were divided into 4 groups according to obturation procedures: Single cone technique + AH Plus sealer(epoxy resin-based root canal sealer, Dentsply International Inc., York, PA, USA); Single cone technique + Sure-Seal Root(bioceramic-based root canal sealer, Sure Dent Corporation, Gyeonggi-do, South Korea); thermoplastic injection technique[Calamus Dual Obturation System(Dentsply-Tulsa Dental, Tulsa, OK, USA)] + AH Plus(Dentsply International Inc.); Sure-Seal Root(Sure Dent Corporation) + Calamus Dual Obturation System (Dentsply-Tulsa Dental). The teeth were inserted into preweighed Eppendorf tubes and retreatment was performed. The tubes were kept in an incubator at 37 °C for 14 days to obtain the dry debris weight. Following the removal of the root canal fillings, the samples were scanned with a micro-CT device to analyse the volume of filling residues. RESULTS: Retreatment of samples obturated with epoxy-resin or bioceramic based root sealers combined with Calamus system resulted in higher amount of apical extrusion compared to their combination with single cone technique (p = 0.026 for Single cone technique + AH Plus sealer vs Calamus + AH Plus sealer and p = 0.005 for Single cone technique + Sure-Seal root sealer vs Calamus + Sure-Seal root sealer). The most debris was observed in the Calamus + Sure-Seal root sealer group, the least debris was observed in the Single cone technique + AH Plus sealer group. The percentage of residues was the highest in the Single cone technique + Sure-Seal root sealer and the lowest in the Calamus + AH Plus sealer group, but there were no significant differences between groups (p = 0.463). CONCLUSIONS: No correlation was observed among the groups in terms of extruded debris and remnants inside the root canal. When combined with bioceramic based sealer, thermoplasticised injection technique did not affect the cleanliness of root canal walls; however, it increased its apical extrusion potential during retreatment. CLINICAL RELEVANCE: The obturation method does not play a role in the removability of bioceramic based root canal sealer, however the use of bioceramic-based root canal sealers with cold obturation techniques may be beneficial in preventing apical extrusion.

Sealer penetration: effect of separated file's cross-section, taper and motion characteristics.

OBJECTIVES: The separated root canal instruments may affect the quality of root canal filling, hence the success of endodontic treatment. The aim of this study was to evaluate the effects of separated file fragments of nickel-titanium rotary systems with different cross-section, taper and motion characteristics on the apical sealer penetration in oval-shaped root canals via confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: Distal roots of 60 mandibular molars with oval-shaped root canals were randomly divided into 4 groups as follows: group 1, FlexMaster Nickel Titanium Rotary File System (NTRFS) (separated instrument: 30/.06); group 2, ProTaper Next NTRFS (X3); group 3, ProTaper Universal NTRFS (F3); group 4, Revo-S NTRFS (AS30/.06). Root canals were filled with gutta-percha and AH plus labelled with 0.1% rhodamine B using a warm vertical compaction technique. Each specimen was horizontally sectioned at 1st, 3rd and 5th mm from apical foramen. Amount of maximum and average penetration depths, penetration percentage and sealer penetrated area were measured and analysed with one-way repeated measures of ANOVA and the Bonferroni post hoc tests. p < 0.05 was considered significant. RESULTS: The penetration depth, percentage and penetrated area of the sealer increased from apical to coronal in all systems. The maximum and average penetration depths and penetration areas were higher in FlexMaster and Revo-S groups at the 3rd mm (p < 0.05). At the 5th mm, the Revo-S group had a higher penetration percentage, when compared with ProTaper Next and ProTaper Universal groups (p < 0.05). CONCLUSIONS: In the 1st mm, separated fragments of any system did not allow the penetration of the sealer, while it was observed that the files with constant taper showed more positive results in terms of sealer penetration at apical 3rd and 5th mm. CLINICAL RELEVANCE: In the presence of a separated file, the taper of the file might significantly affect the amount of penetrated sealer into the dentinal tubules as compared with the cross-section and motion characteristics of the file.

The effect of radiotherapy delivery time and obturation materials on the fracture resistance of mandibular premolars.

OBJECTIVES: This ex vivo study was performed to investigate the effect of radiotherapy (RT) delivery time on fracture resistance of mandibular premolars filled with Biodentine or gutta-percha/sealer (GPS). MATERIALS AND METHODS: Seventy-two mandibular premolars were used in this study. Randomly selected 24 teeth were kept intact for the control groups (with and without irradiation). Then, the remaining 48 teeth were randomly assigned into 4 groups (n = 12) according to RT delivery time (irradiated before or after root canal treatment) and obturation materials as follows: Group RT + GPS, Group: GPS + RT, Group RT + Biodentine and Group Biodentine + RT. The samples were either initially endodontically treated and then irradiated or initially irradiated and then endodontically treated with one of the abovementioned materials. The samples were irradiated at 2 Gy per fraction, 5 times a week for a total dose of 60 Gy in 30 fractions over 6 weeks. The roots were embedded in self-polymerizing acrylic resin. The fracture resistance was evaluated in a universal testing machine. Data was analyzed by one-way ANOVA and Games-Howell post hoc test at p < 0.05. RESULTS: Radiation therapy significantly reduced fracture resistance of intact teeth (p < 0.05). The highest fracture resistance was observed in intact/non-irradiated teeth and the lowest fracture resistance in Biodentine + RT group (p < 0.05). The effect of RT delivery time was insignificant when GPS was preferred as the root canal filling material (p > 0.05); it was significant when preferring Biodentine (p < 0.05). When RT was applied to the teeth after Biodentine obturation, the fracture resistance decreased significantly compared to the teeth that were obturated with GPS after or before RT application (p < 0.05). CONCLUSION: Both RT time and obturation materials (Biodentine or gutta-percha/sealer) affect the fracture resistance of the endodontically treated teeth. CLINICAL RELEVANCE: Endodontic treatment could be completed with both materials after RT; however, when the endodontic treatment was initially completed and the teeth were subsequently exposed to RT, it was shown that the reinforcement effect of Biodentine decreased.

Effect of different irrigation methods in the presence of a separated instrument: an in vitro study.

Objective: The aim of this study was to evaluate the effect of different irrigation methods on sodium hypochlorite (NaOCl)/debris extrusion and dentinal tubule penetration of 2.5% NaOCl in the presence of an apically separated instrument.Materials and methods: Sixty root canals of freshly extracted mandibular single-rooted premolars were chemomechanically prepared up to ProTaper F2. Manual needle irrigation (30-gauge/side-vented) with 2.5% NaOCl was performed between files and a smear layer was removed with 17% ethylenediaminetetraacetic acid. Three mm of notched ProTaper F3 files were separated in the apical third of the roots. Samples were then randomly divided according to the final irrigation systems as follows: EndoActivator, EndoVac, manual needle irrigation, passive ultrasonic activation, and RinsEndo. Samples were mounted to Eppendorf tubes and root canals were irrigated with 3-mL Rhodamine B-labelled 2.5% NaOCl, which was applied using one of the above-mentioned methods. The extruded NaOCl/debris weight was calculated by extracting pre-irrigation weights of tubes from post-irrigation ones. Samples embedded in acrylic resin were sectioned transversely in 1-mm thicknesses at apical 1- and 3-mm levels. NaOCl's penetration depth and percentage into the dentinal tubules were evaluated with the aid of a confocal laser scanning microscope. Data were analysed statistically with Kruskal-Wallis and post hoc Siegel-Castellan tests (p < .05).Results: EndoVac significantly decreased the extruded NaOCl/debris compared to RinsEndo, passive ultrasonic activation, and EndoActivator in the presence of a separated instrument (p < .05). The penetrability of NaOCl significantly increased with the use of RinsEndo and EndoVac compared to the remaining groups (p < .05).Conclusion: In the presence of an irretrievable separated instrument, it could be suggested that devices with apical negative pressure such as EndoVac may improve the penetrability of irrigation solutions to the apical part of the root while preserving periapical tissues from NaOCl/debris extrusion.

Influence of different irrigation protocols on microhardness and flexural strength values of young and aged crown dentin.

OBJECTIVE: To investigate the effect of different irrigation protocols on microhardness (MH) and flexural strength (FS) values of young and aged crown dentin. BACKGROUND: In addition to ageing, root canal irrigation might also affect the mechanical properties of coronal dentin walls. MATERIALS AND METHODS: One hundred and twenty dentin bars (2 mm × 2 mm × 8 mm) were obtained from the crowns of extracted, non-caries, human molars of young and older patients (n = 60 bars; average patient ages: 16.7 and 65.4, respectively). Subgroups were formed as follows: 2.5%NaOCl(sodium hypochlorite)+5%EDTA(ethylenediaminetetraacetic acid), 2.5%NaOCl + 15%EDTA, 2.5%NaOCl, 5%EDTA, 15%EDTA and Saline. NaOCl and saline were used for 20 minutes and EDTA solutions for 1 minute. MH values of each sample were measured before and after the irrigation protocols. The same samples were also submitted for FS analysis. The data were statistically analysed. RESULTS: Young samples had lower MH values at pre- and post-treatment compared to aged samples (P < .05). A significant decrease was observed in MH values of aged samples exposed to 2.5%NaOCl and both NaOCl + EDTA combinations (P < .05). FS values of the young saline-treated group were statistically higher than aged ones (P < .05). Both NaOCl + EDTA combinations caused a significant decrease in FS values of young samples compared to saline (P < .05). CONCLUSION: Ageing has a significant effect on the MH and FS values of crown dentin samples. 5% EDTA solutions revealed similar results to 15%EDTA regarding MH and FS values of crown dentin in both age groups. The NaOCl + EDTA combination had a prominent effect than EDTA alone, on MH values of young-, and FS values of aged dentin samples.

Effect of root canal sealers on the fracture resistance of endodontically treated teeth: a systematic review of in vitro studies.

OBJECTIVE: The purpose of this study was to systematically review and critically analyze the published data of in vitro studies testing the effect of root canal sealers on the fracture resistance of endodontically treated teeth. METHODS: A comprehensive literature search was performed by using the Medline, Scopus, Web of Science, Cochrane, and Open Grey databases. A hand search of the reference lists of identified articles was also performed. Two reviewers critically assessed the studies for eligibility against inclusion and exclusion criteria and performed data extraction. Evaluation of the risk of bias of the studies was performed. RESULTS: A total of 48 studies were assessed for eligibility. Of these, 20 met the inclusion criteria and were included in the systematic review. All studies had a medium or high risk of bias. Although the majority of the studies reported that the use of root canal sealers increased the fracture resistance of endodontically treated teeth, conflicting evidence was found for the reinforcing effect of resin, glass ionomer, and calcium silicate-based sealers while there was moderate evidence for zinc oxide eugenol-based sealers in favor of no reinforcing effect. CONCLUSION: On the basis of available evidence, the use of root canal sealer increases the fracture resistance of endodontically treated teeth. However, included studies presented considerable risk of bias. Regarding the comparisons among the sealers, no conclusions could be drawn for the superiority of one sealer type to another. CLINICAL RELEVANCE: A considerable heterogeneity was found in the methodologies of included studies. Therefore, this review strongly suggests the development of standardized methods to test the reinforcement effect of root canal filling materials in in vitro studies.

Effect of treatment variables on apical extrusion of debris during root canal retreatment: A systematic review and meta-analysis of laboratory studies.

Background: This study aimed to systematically and comprehensively review the effect of various treatment variables on apically extruded debris (AED) during non-surgical root canal retreatment (NSRCRT). Methods: The study protocol is shared in the Open Science Framework database (https://osf.io/kjtdg/?view_only=17060180705745ec9dae9a01614f3880). An electronic search was conducted up to July 2022 to reveal related studies. Two reviewers critically assessed the studies for eligibility against inclusion and exclusion criteria and data extraction. Quantitative data synthesis was performed, and the risk of bias in the studies was also evaluated. Results: Forty-six studies were included in the systematic review and 14 in the meta-analysis. Conflicting or limited evidence was found for the effect of sealer type, obturation technique, and solvent use. The manual instrumentation increased the amount of AED compared to rotary instrumentation during the removal of filling materials (P<0.001). There was no significant difference in the amount of AED between the use of rotary and reciprocating files during the removal of filling materials (P=0.181). Conclusion: Rotary instruments can be recommended instead of manual instruments during the removal of filling materials to control the amount of AED. Further studies with a low risk of bias are needed to clarify the effect of other treatment variables on AED during NSRCRT.

Investigating the Therapeutics Effects of Oral Cavity Derived Stem Cells on Neurodegenerative Diseases: A Systematic Review.

Introduction: Published data obtained from in vitro and in vivo studies was reviewed systematically and analyzed critically to evaluate the effect of oral cavity-derived stem cells (OCDSCs) on the recovery or therapy of neurodegenerative diseases (NDs), such as Alzheimer disease (AD), amyotrophic lateral sclerosis (ALS), Huntington (HD) diseases, and Parkinson disease (PD). Methods: An electronic search was accomplished. References of included articles were also manually searched. Studies were critically evaluated for suitability against the inclusion/exclusion criteria and the data was extracted. Bias risk evaluation of the studies and evidence synthesis were conducted. Results: A total of 14 in vivo and 10 in vitro studies met the inclusion criteria. PD was induced in 10 in vivo and 7 in vitro studies, while AD was induced in 2 in vivo and 4 in vitro studies. Two studies (1 in vitro and 1 in vivo) evaluated ALS disease and 1 in vivo study evaluated HD. Moderate evidence was found for in vitro studies reporting the positive effect of OCDSCs on PD or AD recovery. Strong evidence was found for in vivo studies in which PD animal models were used; meanwhile, moderate evidence was found for the impact of OCDSCs on AD recovery. Limited evidence was found for in vivo studies evaluating HD and ALS. Conclusion: Although studies reported favorable data regarding the OCDSCs on NDs, they presented a considerable risk of bias. Because of heterogeneous study characteristics, the current study recommends improving standardized methods to evaluate the therapeutic effects of OCDSCs on the NDs.

In vitro assessment of the roles of initial preparation size and solvent application on apically extruded debris in endodontically treated teeth.

Background: This study investigated the effects of solvent use and initial canal enlargement size on apically extruded debris (AED). Methods: The palatal roots of 60 upper molars were assigned to two groups based on the initial preparation size: F3 or F4 ProTaper Universal files. The roots were obturated using the single-cone technique. Each group was subdivided based on the retreatment procedures: with or without solvent. After evaporation, the Eppendorf tubes were weighed using an electronic balance. The data were statistically analyzed (P=0.05). Results: Using a solvent enhanced the amount of AED in samples initially prepared up to F3 or F4 files (P<0.05). When the solvent was used, the AED was greater in samples initially prepared up to the F4 file (P<0.05); however, when the solvent was omitted, the results were reversed (P<0.05). Conclusion: Both parameters had a role in AED. Solvents should be used cautiously during root canal retreatment because of the potential for apical extrusion of filling materials. Using files with smaller tapers during initial preparation might be beneficial when considering the amount of AED compared to those with larger tapers.

Do resin-based root canal sealers cause more postoperative pain than other sealers? A systematic review of clinical studies and meta-analysis.

OBJECTIVE: To evaluate whether root canal obturation with resin-based sealers increases the incidence and intensity of postoperative pain compared to other sealer types. DATA SOURCES: Medline, Scopus, Web of Science, Google Scholar, Cochrane Library, and gray literature were searched through December 2020. Clinical studies evaluating postoperative pain after obturation with resin-based sealers and other sealer types were included. Risk of bias was assessed through the Cochrane RoB 2.0 tool for randomized clinical trials (RCTs) and ROBINS-I tool for non-randomized clinical trials (nRCTs). Pooled relative risks (RR), standardized mean differences (SMD), and 95% confidence intervals were calculated for quantitative analyses. Of 524 studies, 11 clinical studies (eight RCTs and three nRCTs) involving 1,123 teeth were included. Four studies were assigned low risk of overall bias while seven studies presented high risk of overall bias. Quantitative analyses were performed with six studies for pain incidence, five studies for pain intensity, and four studies for analgesic intake. There was no significant difference between resin- based sealers and other sealer types in postoperative pain incidence at 24 hours (RR 1.102, P = .53), 48 hours (RR 0.943, P = .93), 72 hours (RR 1.019, P = .93), and 1 week (RR 0.559, P = .31), in pain intensity at 12 hours (SMD 0.100, P = .35), 24 hours (SMD 0.090, P = .25), and 48 hours (SMD 0.217, P = .26), and in analgesic intake at 24 hours (RR 2.253, P = .15) and 72 hours (RR 0.650, P = .59). CONCLUSION: Based on the available evidence, resin-based sealers do not increase the postoperative pain incidence, intensity, and analgesic intake compared to other sealer types.

Odonto/Osteogenic Differentiation of Dental Pulp Stem Cells of Type 1 Diabetic Patients with Mineral Trioxide Aggregate/1α,25-Dihydroxyvitamin D3 Combination.

INTRODUCTION: Vitamin D3 plays an important role in the mineralization mechanism and is often deficient in diabetic patients. The objective of this study was to investigate the odonto/osteogenic differentiation potential of the combination of mineral trioxide aggregate (MTA)/1α,25-dihydroxyvitamin D3 (VD3) on dental pulp stem cells (DPSCs) of patients with type 1 diabetes mellitus (T1DM). METHODS: DPSCs isolated from donors (control and T1DM) were cultured and characterized. Cell proliferation and wound healing assays were performed. DPSCs were exposed to 4 different media: growth medium (Dulbecco's modified Eagle's medium, 10% fetal bovine serum, antibiotic, and antimycotic), differentiation medium (DM) (growth medium plus ß-glycerophosphate and ascorbic acid), DM + MTA (DM plus 0.02 mg/mL MTA), and DM + MTA + VD3 (DM + MTA and 10 nmol/L vitamin D3). Odonto/osteogenic differentiation of DPSCs was evaluated by the alizarin red test, relative real-time polymerase chain reaction (dentin sialophosphoprotein, dentin matrix protein 1, collagen type 1 alpha 1, and osteocalcin), immunocytochemistry (antibone sialoprotein II, anti-dentin matrix protein 1, and anti-collagen type 1 alpha 1), and Western blot (dentin matrix protein 1 and osteocalcin) methods. RESULTS: The proliferation rates of DPSCs isolated from controls were significantly higher than DPSCs isolated from T1DM in a time-dependent manner (P < .05). Alizarin red staining and the expression of odonto/osteogenic markers showed that odonto/osteogenic differentiation was more pronounced in controls (P < .05) compared with T1DM patients. Although DM + MTA caused the odonto/osteogenic differentiation in DPSCs derived from controls, DM + MTA + VD3 resulted in the odonto/osteogenic differentiation in DPSCs of T1DM patients (P < .05). CONCLUSIONS: Odonto/osteogenic differentiation was affected by both supplements used for differentiation and the systemic disease, diabetes mellitus. The differentiation potential of T1DM-derived DPSCs was clearly increased with the VD3 supplement, although it was not as efficient as in the controls. The VD3 supplement showed a positive effect on the differentiation of T1DM DPSCs compared with MTA alone.

Contribution of XP-Endo files to the root canal filling removal: A systematic review and meta-analysis of in vitro studies.

This review was designed to analyse whether the supplementary use of XP-Endo Finisher and XP-Endo Finisher R contributes to the removal of root canal filling materials. Databases were searched up to November 2020. Studies were critically assessed according to inclusion and exclusion criteria. Risk of bias evaluation was performed. Pooled standardised mean differences (SMD) and 95% confidence intervals (95% CI) were calculated. Ten studies involving 192 teeth were eligible for systematic review and meta-analysis could be performed with eight of these studies. Strong evidence showed that XP-Endo Finisher R file contributed significantly to filling material removal from root canals (SMD (95% CI): 0.41 (0.06-0.76)). Although the evidence was conflicting, XP-Endo Finisher R file was superior than other irrigant activation techniques (SMD (95% CI): 0.47 (0.02-0.93)). The supplementary use of XP-Endo Finisher and XP-Endo Finisher R is beneficial in further removal of root canal filling materials from root canal system.

Influence of reciprocating and rotary instrumentation on microbial reduction: a systematic review and meta-analysis of in vitro studies.

OBJECTIVES: The purpose of this study was to conduct a systematic review and meta-analysis of in vitro studies regarding the effectiveness of reciprocating and rotary instrumentation on microbial reduction in root canals. MATERIALS AND METHODS: PubMed, Scopus, Web of Science, the Cochrane Library, and the gray literature were searched through December 2019. Studies comparing the influence of reciprocating and rotary instrumentation on the removal of microorganisms from root canals that quantified the antimicrobial effect were included. Data extraction was completed using a systematic form for data collection. The risk of bias of the studies was evaluated. Standardized mean differences (SMDs) and confidence intervals (CIs) were calculated using a random effects meta-analysis. RESULTS: Seventeen in vitro studies were included in this systematic review, of which 7 provided adequate data for inclusion in the meta-analysis. Both reciprocating and rotary systems were similarly effective in reducing the microbial load in infected root canals (SMD [95% CI], 0.0481 [-0.271, 0.367]). Three studies showed a low risk of bias, whereas most of the studies (82%) presented a medium risk. CONCLUSIONS: Although both techniques decrease the microbial content (with reductions of 23.32%-88.47% and 23.33%-89.86% for reciprocating and rotary instrumentation, respectively), they are not able to provide complete disinfection of root canals.

Filling quality of several obturation techniques in the presence of apically separated instruments: A Micro-CT study.

Separated root canal instruments may affect the quality of root canal obturation and hence the survival of endodontically treated teeth. Obturation techniques may influence filling-quality. The aim was to evaluate the obturation quality of teeth filled with different obturation techniques in the presence of apically separated instruments using micro-computed tomography (µ-CT). Notched ProTaper F2 rotary-files were separated in the apical third of 36-human mandibular incisors with single root/canal and mature apex. Samples were filled by an endodontist according to one of the following obturation techniques (n = 12): cold lateral-compaction (CLC), single-cone (SC) and thermoplastic injection (TI). Samples were scanned by the Skyscan 1,274® µ-CT device after 1-week at 37°C in 100% humidity. Images of the sections were evaluated with CTan software in terms of total-volume and volume percentage of the filling materials and voids between coronal end of the separated instrument and gutta-percha/sealer filled void-free sections. Data was analyzed using Kruskal-Wallis and Mann Whitney-U tests with a significance level of 5%. Kruskal-Wallis revealed differences among groups (p < 0.05).Pairwise comparisons revealed that less volume of voids were measured in SC (0.02 ± 0.03 mm3 ) compared to CLC (0.15 ± 0.16 mm3 ) and TI (0.18 ± 0.24 mm3 ) (p < 0.05); while TI was statistically similar with CLC (p > 0.05). Percentages of volumes of voids and filling materials were as follows for SC, CLC and TI, respectively: 8.88 ± 18.52% and 24.45 ± 38.40%, 46.92 ± 33.53% and 53.07 ± 33.53%, 40.54 ± 33.85% and 42.79 ± 34.45%. The obturation technique may have a significant impact on the volume of voids in the presence of a separated file. No obturation technique produced a void-free root canal filling.

The effect of intracanal medication variations on microhardness of simulated immature root dentin.

The effect of different medicaments and irrigation solutions on root dentin microhardness (MH) was evaluated depending on time. After initial measurements, MH of 60 maxillary incisors (n = 15 per group) was measured after 3 steps: irrigation with 2.5% sodium hypochlorite, exposure to medicaments [triple antibiotic (TAP) or calcium hydroxide (CH) pastes, 1 week or 1 month)] and final irrigation [20 mL of 17% EDTA or 20 mL 1% phytic acid (PA)]. The percentage of MH reduction was calculated. Data were analysed statistically at P < 0.05. Treatments caused a significant decrease in MH values compared to baseline and pre-measurements (P < 0.05). TAP significantly reduced the MH values of the samples over time (P < 0.05). Removal of TAP after 1 month with PA resulted in a significant reduction in MH compared to removing TAP after 1 week and CH removing after 1 month (P < 0.05). Considering the chemical preparation steps, the most hazardous effect on MH was observed after the first irrigation.

Evaluation of the amount of remained sealer in the dentinal tubules following re-treatment with and without solvent.

BACKGROUND: The effect of solvent and sealer type (BioRoot RCS [BRRCS], mineral trioxide aggregate [MTA] Fillapex, and AH26) on the root canal residues was evaluated by confocal laser scanning microscopy (CLSM). MATERIALS AND METHODS: Distal root canals of 60 mandibular molars prepared up to ProTaper-F4 were filled using one of the sealers labeled with 0.1% rhodamine-B (n = 20 per sealer). Samples were divided into two according to reprocessing methods as follows: ProTaper Universal Reprocessing System (PTUR) or solvent plus PTUR. Samples were sectioned at 2-5 and 8 mm from the apex and the samples were observed under CLSM. Penetration depth, percent penetration depth, and percent penetration into canal walls were evaluated. Statistical analysis was performed using the repeated measures of the two-way ANOVA and Bonferroni post hoc test at P = 0.05. RESULTS: The highest penetration depth was measured in BRRCS in all root canal thirds with or without chloroform addition. Percentage of penetration depth values of MTA Fillapex and BRRCS was statistically similar and higher than AH26 in all sections, except the apical section re-treated with the addition of chloroform. CONCLUSION: None of the sealers were completely removed. The type of sealant and the use of chloroform changed the amount of sealant remaining in the root canal system.

The effect of different obturation methods on sealer penetration alongside apically separated rotary nickel-titanium instruments: A confocal laser scanning microscopy study.

The effects of different obturation techniques on calcium silicate-based sealer penetration in the presence of apically separated rotary files were evaluated. Forty-eight extracted mandibular incisors were used. ProTaper F2 rotary files were separated at the apical thirds. Samples were divided into four groups (n = 12) according to obturation technique used: (a) cold lateral compaction (CLC); (b) single cone; (c) bulk-fill (BF) without a core material; and (d) thermoplastic injection (TI). Specimens were sectioned horizontally at 1 and 3 mm from the apex and studied using a confocal scanning laser microscope. The maximum tubule penetration depth and percentage of penetration were measured. Data were statistically analyzed using parametric and nonparametric tests with a significance level of 5%. Regarding penetration depth, a significant difference was found at 1 mm (p < .05), while no significant difference was found at 3 mm (p > .05). At the 3 mm level, all of the obturation techniques showed similar penetration depths. Regarding penetration percentage, the values of the CLC and TI groups were statistically less when compared with the BF group at 1 and 3 mm levels, respectively (p < .05). Under the limitations of this in vitro study, results suggest that the obturation technique may present a significant effect on sealer penetration.

Critical evaluation of fracture strength testing for endodontically treated teeth: a finite element analysis study.

OBJECTIVES: The aim of this study was to investigate whether the diameter and direction of the plunger and simulation of the periodontal ligament (PDL) affected the stress distribution in endodontically treated premolars. METHODS: A fracture strength test was simulated via finite element analysis. A base model was set up, and the following parameters were modified: plunger diameter (3 mm vs. 6 mm), plunger direction (vertical vs. 135° angular to the central fossa), and PDL simulation. The analysis was conducted using the CosmosWorks structural analysis program, and the results are presented in terms of von Mises stresses. RESULTS: The smaller plunger increased the stresses at the contact area of the crown, but the plunger diameter had no effect on the stress distribution within the root. An angular plunger direction increased stresses within the root, as well as at the buccal cusp of the crown, compared with the vertical direction. Simulation of the PDL caused higher stress accumulation, especially in the cervical region of the root. CONCLUSIONS: The plunger diameter had no effect on the stress distribution in the roots, whereas the plunger direction and PDL simulation did affect the stress distribution. More stringent standards can be established by taking such parameters into account when performing fracture testing in future studies.

Evaluation of fracture resistance of roots-filled with various root canal sealers at different time periods.

PURPOSE: The reinforcement effect of 3 various root canal sealers (AH 26, MTA Plus sealer and BioRoot RCS) and gutta-percha at different time periods (1 week and 1 month) were evaluated in the present study. MATERIALS AND METHODS: Single-rooted, single-canalled, cracks-free 80 mandibular premolars were decoronated to a length of 13mm. Group PC (positive control, n=10): samples were left unprepared and unfilled. Seventy samples were prepared by using the ProTaper Rotary System up to F4. Group NC (negative control, n=10): samples were left unfilled. Remaining 60 samples were assigned into 3 groups; Group 1: AH 26 + F4 gutta-percha (GP); Group 2: MTA Plus sealer + F4 GP and Group 3: BioRoot RCS + F4 GP. Filled samples were divided into subgroups according to storage time: Samples in Groups 1A, 2A, and 3A were stored for 1 week; while Groups 1B, 2B and 3B were stored for 1 month at 100% humidity to allow the complete setting of the sealers (n=10, for each). A universal testing machine at a crosshead speed of 1.0 mm/min was used for fracture testing. For each specimen, the force at the time of fracture was recorded and the data were analyzed statistically. RESULTS: The highest fracture resistance values were obtained in Group PC, while the lowest values were obtained in Group NC. Groups PC and NC were statistically different from each other and from other groups, regardless of time (p<0.05). Fracture resistance values of Group AH 26/GP were statistically different from MTA Plus sealer/GP (p<0.05) and were statistically similar with BioRoot RCS/GP , irrespective of time. Within group comparisons revealed that there were no statistically differences between samples filled with same sealer at different time periods. CONCLUSION: Root canal preparation caused decreased fracture resistance. All sealers increased the force values needed to fracture the filled samples compared to unfilled ones. Time factor had no effect on the fracture resistance values.

Effect of Temperature of Sodium Hypochlorite on Cyclic Fatigue Resistance of Heat-treated Reciprocating Files.

INTRODUCTION: The aim of this study was to evaluate the effect of different temperatures of sodium hypochlorite (NaOCl) on the cyclic fatigue resistance of the heat-treated file systems. METHODS: The cyclic fatigue resistance of Reciproc 25 (VDW Dental, Munich, Germany), Reciproc Blue R25 (VDW), WaveOne Primary (Dentsply Maillefer, Ballaigues, Switzerland), WaveOne Gold Primary (Dentsply Maillefer), and One Shape (25.06; Micro Mega, Besançon, France) was tested in the following conditions: control (no immersion), immersion in distilled water (DW) at 37°C ± 1°C, immersion in DW at 60°C ± 1°C, immersion in NaOCl at 37°C ± 1°C, and immersion in NaOCl at 60°C ± 1°C. The immersion period was 5 minutes for all conditions. A stainless steel artificial canal with a curvature of 60° and a 5-mm radius was used. The time to failure and fragment lengths were recorded for each instrument, and data were subjected to statistical analysis. RESULTS: Reciproc Blue showed greater cyclic fatigue resistance in all conditions compared with the other systems (P < .05). Immersion in NaOCl at 60 °C negatively affected all instruments' cyclic fatigue resistance except Reciproc Blue. Immersion in DW at 60 °C increased the cyclic fatigue resistance of Reciproc Blue. Heat-treated files presented higher fatigue resistance than traditional files. CONCLUSIONS: A high temperature of NaOCl affected the cyclic fatigue life of the file systems. Instruments produced with heat treatment presented a longer fatigue life.